Changes between Version 7 and Version 8 of Devices

Timestamp:

09/23/06 14:56:05 (7 years ago)

Author:

khali

Comment:

Fix wiki mislinks; fix uGuru name; icspll never ported

Devices

@@ -63 +63 @@
 || [http://www.semiconductors.philips.com/ Philips] || Parallel port adapter || yes || i2c-philips-par || 2.4.3 || 2.3.34 - 2.6.4 || In our i2c package. Deprecated, use i2c-parport instead (Linux 2.6.2+). ||
 || [http://www.s3graphics.com/ S3] || Savage4, Savage2000 || yes || [source:lm-sensors/trunk/doc/busses/i2c-savage4 i2c-savage4] || 2.6.4 || 2.6.0 ||  ||
-|| [http://www.s3graphics.com/ S3] || Savage3D, ProSavage, Savage MX, Savage IX || yes ||  ||  ||  || No plan. ||
-|| ServerWorks || OSB4, CSB5 || yes || [source:lm-sensors/trunk/doc/busses/i2c-piix4 i2c-piix4] || 2.5.5 || 2.5.65 ||  ||
-|| ServerWorks || CSB6 || yes || [source:lm-sensors/trunk/doc/busses/i2c-piix4 i2c-piix4] || 2.8.2 || 2.6.1 ||  ||
+|| [http://www.s3graphics.com/ S3] || Savage3D, !ProSavage, Savage MX, Savage IX || yes ||  ||  ||  || No plan. ||
+|| Serverworks || OSB4, CSB5 || yes || [source:lm-sensors/trunk/doc/busses/i2c-piix4 i2c-piix4] || 2.5.5 || 2.5.65 ||  ||
+|| Serverworks || CSB6 || yes || [source:lm-sensors/trunk/doc/busses/i2c-piix4 i2c-piix4] || 2.8.2 || 2.6.1 ||  ||
 || [http://www.sis.com/ SiS] || 5511, 5512, 5513 || misdetected as 5595 ||  ||  ||  || These chipsets don't even have an I2C bus interface, so they shouldn't really be in this table, but sensors-detect thinks they are 5595. ||
 || [http://www.sis.com/ SiS] || 5581, 5582, 5597, 5598 || misdetected as 5595 ||  ||  ||  || Sensors-detect will recommend i2c-sis5595 but it won't work. It will also recommend sis5595 for sensors but that is wrong too, these chips do not have integrated sensors. Poor data sheets prevent us from implementing I2C/DDC support for these chips. ||
@@ -99 +99 @@
 
 ||Manufacturer  ||      Chip    ||Detected || Driver ||Since lm-sensors||Since kernel ||Status, Comments ||
-|| [http://www.abit.com.tw/ Abit] || [http://www.abit.com.tw/page/en/news/newspop.php?pDOCNO=en_0309184 Guru] || no ||  ||  || 2.6.18  || (2004-09-14) Actually a Winbond W83L950D in disguise (despite Abit claiming it is "a new microprocessor designed by the ABIT Engineers") with many Abit-specific additions. ||
+|| [http://www.abit.com.tw/ Abit] || [http://www.abit.com.tw/page/en/news/newspop.php?pDOCNO=en_0309184 µGuru] || no ||  ||  || 2.6.18  || (2004-09-14) Actually a Winbond W83L950D in disguise (despite Abit claiming it is "a new microprocessor designed by the ABIT Engineers") with many Abit-specific additions. ||
 || [http://www.ali.com.tw/ ALi] || M5879 || no ||  ||  ||  || No plan. ||
 || [http://www.amd.com/ AMD] || K8 || yes || k8temp || - || [http://khali.linux-fr.org/devel/linux-2.6/hwmon-k8temp-new-driver.patch patch] || (2006-09-02) Latest AMD K8 processors have integrated sensors which can be read directly without any additional monitoring chip. Driver contributed by Rudolf Marek. Userspace support is already in lm_sensors SVN. ||
@@ -253 +253 @@
 ||  || EEPROM SPD || yes || [source:lm-sensors/trunk/doc/chips/eeprom eeprom] ||2.0.2 ||2.6.0 ||  ||
 ||  || Monitor EDID EEPROM || yes || [source:lm-sensors/trunk/doc/chips/ddcmon ddcmon] ||2.5.0 ||''never'' || (2005-01-04) Deprecated. Use the eeprom driver with the ddcmon perl script instead. ||
-||  || Clock chips || no || [source:lm-sensors/trunk/doc/chips/icspll icspll] ||2.3.0 ||- || Dangerous and useless devices found at address 0x69. Not built by default, read only. Not recommended. ||
+||  || Clock chips || no || [source:lm-sensors/trunk/doc/chips/icspll icspll] || 2.3.0 || ''never'' || Dangerous and useless devices found at address 0x69. Not built by default, read only. Not recommended. ||
 ||  || Smart batteries || yes || [source:lm-sensors/trunk/doc/chips/smartbatt smartbatt] ||2.7.0 ||- ||  ||
 ||  || "Slave mode" on a bus master, e.g. PIIX4 || no ||  ||  ||  || Required for SMBus 2.0 ARP Master Notification at address 0x08. No plan. ||