Contributed by Glen Journeay.

[Jean Delvare: Vcore is suspicious, I can't think of a valid reason for scaling Vcore that way.]

# lm_sensors configuration file for the Gigabyte MA785GM-US2H motherboard
# 8-12-2010 G. Journeay <journeay@gmail.com>
# Comments welcome!

chip "it8718-*"

### Voltages

   label  in0  "Vcore"
   label  in1  "Vram"    # "DDR2" in BIOS
   label  in2  "+3.3V"
   label  in3  "+5V"     # Not in BIOS
   ignore in4
   ignore in5
   ignore in6
   label  in7  "+12V"
   label  in8  "Vbat"    # Not in BIOS

   # Vcore, Vram, +3.3V and Vbat are connected directly, so no compute
   # line is needed for these. For +5V the chip is configured to use
   # internal scaling. For +12V the default resistors seem to have been
   # used.
   compute  in0  @ * (  3/10+1), @ / (  3/10+1)
   compute  in3  @ * (6.8/10+1), @ / (6.8/10+1)
   compute  in7  @ * ( 45/10+1), @ / ( 45/10+1)

   # The BIOS won't set any limit for voltages.

   set in0_min 1.48 * 0.95
   set in0_max 1.48 * 1.05
   set in1_min 1.8 * 0.95
   set in1_max 1.8 * 1.05
   set in2_min 3.3 * 0.95
   set in2_max 3.3 * 1.05
   set in3_min   5 * 0.95
   set in3_max   5 * 1.05
   set in7_min  12 * 0.95
   set in7_max  12 * 1.05

### Temperatures

   label  temp1  "CPU Temp"
   label  temp2  "MB Temp"
   label  temp3  "NBr Temp"

   set temp1_min 0
   set temp1_max 60
   set temp2_min 0
   set temp2_max 50
   set temp3_min 0
   set temp3_max 50

### Fans

   label  fan1  "CPU Fan"
   label  fan2  "SYS Fan"
   ignore fan3
   label  fan4  "NB Fan"  

   # Adjust for your own fans
   set fan1_min 1000
   set fan4_min 1000