G33-DS3R

Configuration file contributed by Eduardo Diaz Rodriguez, based on earlier work by Jean Delvare. This is basically the same as for the 965P DS3, except that the G33 DS3R has a 3rd fan header.

# lm_sensors configuration file for the Gigabyte G33 DS3R motherboard

chip "it8718-*"

### Voltages

   label  in0  "Vcore"
   label  in1  "Vram"    # "DDR18V" in BIOS
   label  in2  "+3.3V"
   label  in3  "+5V"     # Not in BIOS
   ignore in4
   ignore in5
   ignore in6
   label  in7  "+12V"
   label  in8  "Vbat"    # Not in BIOS

   # Vcore, Vram, +3.3V and Vbat are connected directly, so no compute
   # line is needed for these. For +5V the chip is configured to use
   # internal scaling. For +12V the default resistors seem to have been
   # used.
   compute  in3  @ * (6.8/10+1), @ / (6.8/10+1)
   compute  in7  @ * ( 30/10+1), @ / ( 30/10+1)

   # The BIOS won't set any limit for voltages.

   set in0_min vid * 0.95
   set in0_max vid * 1.05
   set in1_min 1.8 * 0.95
   set in1_max 1.8 * 1.05
   set in2_min 3.3 * 0.95
   set in2_max 3.3 * 1.05
   set in3_min   5 * 0.95
   set in3_max   5 * 1.05
   set in7_min  12 * 0.95
   set in7_max  12 * 1.05

### Temperatures

   label  temp1  "NBr Temp"
   label  temp2  "CPU Temp"
   ignore temp3

   set sensor3 0

   set temp1_low  10
   set temp1_over 50
   set temp2_low  10
   set temp2_over 60

### Fans

   label  fan1  "CPU Fan"
   label  fan2  "Case Fan"

   # Adjust for your own fans
   set fan1_min 1000
   set fan2_min 4000