Changes between Version 1 and Version 2 of Configurations/DFI/EL620-C

Timestamp:

06/22/12 15:12:34 (11 months ago)

Author:

khali

Comment:

Apply adjustments following list discussion

Configurations/DFI/EL620-C

@@ -25 +25 @@
     compute in6 @*(1+(60.4/10)),  @/(1+(60.4/10))
 
-# We need to set voltage limits. Note you may need to adapt in0 depending on your CPU
-    set in0_min   0.9
-    set in0_max   1.7
+# We need to set voltage limits.
+    set in0_min   0.80
+    set in0_max   1.55
 
     set in1_min   5.0*0.95
@@ -41 +41 @@
     set in4_max   1.1*1.05
 
-# DDR3 voltage ranges?
+# DDR3 voltage range
     set in5_min   1.30
-    set in5_max   1.65
+    set in5_max   1.58
 
 # Original ATX spec was +/-10% on +12V, but recent ATX12V version 2.2 spec is 5% (still 10% on unmonitored -12V)
@@ -64 +64 @@
    ignore fan5
    
-# Fan minimums, disable fan1 & fan2 as a case fan is not always connected
+# Fan minimums, disable fan1 & fan3 as a case fan is not always connected
   set fan1_min    0
   set fan2_min    500