Ticket #763 (closed task)
Opened 7 years ago
Invalid Keyword (Examined/Solved - lm_sensors-2.6.2, Linux 2.4.14)
|Reported by:||contact||Owned by:||somebody|
I have installed i2c-2.6.2 and lm_sensors-2.6.2. I have done all the required
module loading and configuration up to "sensors -s". At this point, I get the
error "Error: Line 180: Invalid keyword". I found that line in my
/etc/sensors.conf, and put in an empty space, moving the line that was there
down. Still the same error. I have removed /usr/local/lib/*sens*, reinstalled
(ldconfig and all), and the error is still there. I'm really stuck here, and I
would appreciate any help.
--- I just tested it and it looks like the line reported may be
one too high. I put garbage on line 212 and it complained about
line 213. But our stock etc/sensors.conf.eg file that gets
installed has comments in the first 200 lines or so so
I don't know how you have a problem at line 180
unless you have modified things a lot. Look at line 179.
Or even better,
I suggest you copy over the stock file to /etc/sensors.conf
by hand and that should fix it.
If that doesn't do it email us and reference your ticket number.