no sensors detected on asus f3jc

[ticket]

Hello... i'm a newbie but i would like to monitor my cpu temp, fan, voltage on my kubuntu 8.4beta cause there's a big fan noise (i've any fan noise under XP)... after a lot of google and forums i've installed lm-sensors (using apt-get). then i runned:

frz@shiva:~$ sudo sensors-detect
# sensors-detect revision 5016 (2007-11-11 22:20:16 +0100)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7

We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): y
Module loaded successfully.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): y
Module loaded successfully.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: NVIDIA i2c adapter  (i2c-0)
Do you want to scan it? (YES/no/selectively): y

Next adapter: NVIDIA i2c adapter  (i2c-1)
Do you want to scan it? (YES/no/selectively): y

Next adapter: NVIDIA i2c adapter  (i2c-2)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                Yes
    (confidence 8, not a hardware monitoring chip)

Next adapter: SMBus I801 adapter at 0400 (i2c-3)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `Silicon Integrated Systems SIS5595'...         No
Probing for `VIA VT82C686 Integrated Sensors'...            No
Probing for `VIA VT8231 Integrated Sensors'...              No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Trying family `ITE'...                                      No

Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no): y
AMD K8 thermal sensors...                                   No
AMD K10 thermal sensors...                                  No
Intel Core family thermal sensor...                         Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp' (should be inserted):
  Detects correctly:
  * Chip `Intel Core family thermal sensor' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To load everything that is needed, add this to /etc/modules:

#----cut here----
# Chip drivers
coretemp
#----cut here----

Do you want to add these lines automatically? (yes/NO)n

then i've added coretemp to /etc/modules and restarted the machine. Then:

frz@shiva:~$ sudo sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +56.0°C  (crit = +85.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +57.0°C  (crit = +85.0°C)

it seems there's any temp, fan or voltage sensors :( i don't understand where i'm wrong can anyone help me? thank you

[khali]

These results are expected for a laptop: most laptops do not have a hardware monitoring chip lm-sensors can use directly. Instead, thermal management is handled by ACPI. If you have problems with your fan, I suggest that you try loading either the asus_acpi driver or the asus-laptop driver (not sure why there are two drivers for this.) If this doesn't help then you would report to the ACPI people.