Ticket #2207 (closed enhancement: fixed)

Opened 8 years ago

Last modified 7 years ago

ASUS M2N8L no chip driver

Reported by: fraenzi2000@… Owned by: juergh
Priority: minor Milestone:
Component: hardware Version: 2.10.3
Keywords: Cc:

Description (last modified by khali) (diff)

easyVDR:~# sensors -v
sensors version 2.10.3 with libsensors version 2.10.3
easyVDR:~# sensors-detect
# sensors-detect revision 4348 (2007-03-18 02:45:21 -0700)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...

Use driver `i2c-nforce2' for device 0000:00:0a.1: nVidia Corporation nForce4 SMBus (MCP51)

We will now try to load each adapter module in turn.
Module `i2c-nforce2' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no):
Module loaded successfully.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: SMBus nForce2 adapter at 4c40 (i2c-3)
Do you want to scan it? (YES/no/selectively):

Next adapter: SMBus nForce2 adapter at 4c00 (i2c-2)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x2e
Probing for `Myson MTP008'...                               No
Probing for `National Semiconductor LM78'...                No
Probing for `National Semiconductor LM78-J'...              No
Probing for `National Semiconductor LM79'...                No
Probing for `National Semiconductor LM80'...                No
Probing for `National Semiconductor LM85 or LM96000'...     No
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'...        No
Probing for `Analog Devices ADT7462'...                     No
Probing for `Analog Devices ADT7467 or ADT7468'...          No
Probing for `Analog Devices ADT7470'...                     No
Probing for `Analog Devices ADT7473'...                     No
Probing for `Analog Devices ADT7475'...                     No
Probing for `Analog Devices ADT7476'...                     No
Probing for `Andigilog aSC7611'...                          No
Probing for `Andigilog aSC7621'...                          No
Probing for `National Semiconductor LM87'...                No
Probing for `National Semiconductor LM93'...                No
Probing for `Winbond W83781D'...                            No
Probing for `Winbond W83782D'...                            No
Probing for `Winbond W83792D'...                            No
Probing for `Winbond W83793R/G'...                          No
Probing for `Winbond W83791SD'...                           No
Probing for `Winbond W83627HF'...                           No
Probing for `Winbond W83627EHF'...                          No
Probing for `Winbond W83627DHG'...                          No
Probing for `Asus AS99127F (rev.1)'...                      No
Probing for `Asus AS99127F (rev.2)'...                      No
Probing for `Asus ASB100 Bach'...                           No
Probing for `Winbond W83L785TS-S'...                        No
Probing for `Analog Devices ADM9240'...                     No
Probing for `Dallas Semiconductor DS1780'...                No
Probing for `National Semiconductor LM81'...                No
Probing for `Analog Devices ADM1026'...                     No
Probing for `Analog Devices ADM1025'...                     No
Probing for `Analog Devices ADM1024'...                     No
Probing for `Analog Devices ADM1029'...                     No
Probing for `Analog Devices ADM1030'...                     No
Probing for `Analog Devices ADM1031'...                     No
Probing for `Analog Devices ADM1022'...                     No
Probing for `Texas Instruments THMC50'...                   No
Probing for `Analog Devices ADM1028'...                     No
Probing for `ITE IT8712F'...                                No
Probing for `SMSC DME1737'...                               No
Probing for `Fintek F75373S/SG'...                          No
Probing for `Fintek F75375S/SP'...                          No
Probing for `Fintek F75387SG/RG'...                         No
Probing for `Winbond W83791D'...                            No
Client found at address 0x50
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x51
Handled by driver `eeprom' (already loaded), chip type `eeprom'

Next adapter: B2C2 FlexCop device (i2c-1)
Do you want to scan it? (YES/no/selectively):
Adapter cannot be probed, skipping.

Next adapter: Technotrend/Hauppauge WinTV Nexus-S rev2.X (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x51
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x52
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x53
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x54
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x55
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x56
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x57
Handled by driver `eeprom' (already loaded), chip type `eeprom'

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `Silicon Integrated Systems SIS5595'...         No
Probing for `VIA VT82C686 Integrated Sensors'...            No
Probing for `VIA VT8231 Integrated Sensors'...              No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x7703
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     Yes
Found unknown chip with ID 0x7703
Trying family `VIA/Winbond/Fintek'...                       No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No

Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no):
AMD K8 thermal sensors...                                   Success!
    (driver `k8temp')
Intel Core family thermal sensor...                         No
Intel AMB FB-DIMM thermal sensor...                         No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `eeprom' (should be inserted):
  Detects correctly:
  * Bus `SMBus nForce2 adapter at 4c00'
    Busdriver `i2c-nforce2', I2C address 0x50
    Chip `eeprom' (confidence: 6)
  * Bus `SMBus nForce2 adapter at 4c00'
    Busdriver `i2c-nforce2', I2C address 0x51
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x50
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x51
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x52
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x53
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x54
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x55
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x56
    Chip `eeprom' (confidence: 6)
  * Bus `Technotrend/Hauppauge WinTV Nexus-S rev2.X'
    Busdriver `UNKNOWN', I2C address 0x57
    Chip `eeprom' (confidence: 6)

  EEPROMs are *NOT* sensors! They are data storage chips commonly
  found on memory modules (SPD), in monitors (EDID), or in some
  laptops, for example.

Driver `k8temp' (should be inserted):
  Detects correctly:
  * Chip `AMD K8 thermal sensors' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To make the sensors modules behave correctly, add these lines to
/etc/modules.conf:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-nforce2
# modprobe unknown adapter Technotrend/Hauppauge WinTV Nexus-S rev2.X
# modprobe unknown adapter B2C2 FlexCop device
# Chip drivers
modprobe eeprom
modprobe k8temp
# sleep 2 # optional
/usr/local/bin/sensors -s # recommended
#----cut here----

If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won't work until the needed
modules are loaded.

Change History

Changed 7 years ago by khali

  • reporter changed from ticket to fraenzi2000@…
  • description modified (diff)
  • milestone 2.10.4 deleted

Changed 7 years ago by khali

  • cc fraenzi2000@… removed
  • owner changed from somebody to juergh
  • type changed from defect to enhancement
  • priority changed from major to minor

Juerg, smells like a DME1737 / A8000?

Changed 7 years ago by juergh

  • status changed from new to closed
  • resolution set to fixed

Yes, it's most likely an A8000.

Reporter: Please use the latest SVN version of sensors-detect which will correctly identify the chip. The driver you need is the dme1737 which will be included with kernel 2.6.23. Or you can pull the patchset from the mailinglist archives:  http://lists.lm-sensors.org/pipermail/lm-sensors/2007-May/019752.html  http://lists.lm-sensors.org/pipermail/lm-sensors/2007-May/019751.html

Note: See TracTickets for help on using tickets.