Support for MSI P965 MB

[ticket]

I tried # /usr/sbin/sensors-detect

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH8
.......
Client found at address 0x30
Client found at address 0x32
Client found at address 0x36
Client found at address 0x46
Probing for `Maxim MAX6633/MAX6634/MAX6635'...              Success!
    (confidence 2, driver `lm92')
Client found at address 0x50
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x52
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x69
........
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
........
Trying family `VIA/Winbond/Fintek'...                       Yes
Found unknown chip with ID 0x0541
........
Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `lm92' (should be inserted):
  Detects correctly:
  * Bus `SMBus I801 adapter at 0400'
    Busdriver `i2c-i801', I2C address 0x46
    Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)

Driver `eeprom' (should be inserted):
  Detects correctly:
  * Bus `SMBus I801 adapter at 0400'
    Busdriver `i2c-i801', I2C address 0x50
    Chip `eeprom' (confidence: 6)
  * Bus `SMBus I801 adapter at 0400'
    Busdriver `i2c-i801', I2C address 0x52
    Chip `eeprom' (confidence: 6)
  * Bus `saa7133[0]'
    Busdriver `UNKNOWN', I2C address 0x50
    Chip `eeprom' (confidence: 6)

next was:

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-i801
# modprobe unknown adapter saa7133[0]
# Chip drivers
modprobe lm92
modprobe eeprom
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

so... :

[root@localhost di]# /sbin/modprobe -v i2c-i801
insmod /lib/modules/2.6.18-1.2868.fc6/kernel/drivers/i2c/busses/i2c-i801.ko 
[root@localhost di]# /sbin/modprobe -v lm92
insmod /lib/modules/2.6.18-1.2868.fc6/kernel/drivers/hwmon/hwmon.ko 
insmod /lib/modules/2.6.18-1.2868.fc6/kernel/drivers/hwmon/lm92.ko 
[root@localhost di]# /sbin/modprobe -v eeprom
insmod /lib/modules/2.6.18-1.2868.fc6/kernel/drivers/i2c/chips/eeprom.ko 
[root@localhost di]# /usr/bin/sensors -s
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

So I can't monitor my hardwere =(

Can this help:

[root@localhost di]# uname -a
Linux localhost.localdomain 2.6.18-1.2868.fc6 
#1 SMP Fri Dec 15 17:32:54 EST 2006 i686 i686 i386 GNU/Linux
[root@localhost di]# sensors -v
sensors version 2.10.1 with libsensors version 2.10.1

?

... and what else debug info do you need?

[ticket]

my ls_sensors full output + more debug info

[ticket]

/sbin/lspci | tee /tmp/pci_debug

[ticket]

/sbin/lspci -n | tee /tmp/pci_debug1

[ticket]

/sbin/lspci -vvvv | tee /tmp/pci_debug2

[ruik]

Hello,

You have not yet supported chip known as EPoX EP1308 or Fintek F71882FG or FoxOne? ;) Please wait until it is done. (watch the lm-sensors list or devices driver page)

Thanks, Rudolf