Ticket #189 (closed task)
Opened 7 years ago
smp vcore diff (Examined/Solved - lm_sensors 2.4.3/kernel 2.2.13smp)
| Reported by: | contact | Owned by: | somebody |
|---|---|---|---|
| Priority: | minor | Milestone: | |
| Component: | hardware | Version: | |
| Keywords: | Cc: |
Description
Abit BP6 Winbond W83977EF Celeron 366A x 2 overclocked to 550 I have installed the kernel patches and recompiled. As far as I can tell things are working but I am troubled by the discrepancy between the core voltge readings on the 2 CPUs. FWIW the BIOS readings are both close to the set number of 2.10 and the system seems to be working fine. And fyi the CPU fans are not plugged into the mobo headers:) I have appended the output from the 'sensors' utility below. Any info appreciated, and thanks for your efforts.
w83782d-i2c-0-2d Adapter: SMBus PIIX4 adapter at 5000 Algorithm: Non-I2C SMBus adapter VCore 1: +2.12 V (min = +1.88 V, max = +2.30 V) VCore 2: +1.53 V (min = +1.88 V, max = +2.30 V) +3.3V: +3.37 V (min = +2.97 V, max = +3.63 V) +5V: +5.17 V (min = +4.50 V, max = +5.48 V) +12V: +11.89 V (min = +10.79 V, max = +13.11 V) -12V: -12.03 V (min = -13.21 V, max = -10.90 V) -5V: -5.10 V (min = -5.51 V, max = -4.51 V) V5SB: +4.94 V (min = +4.50 V, max = +5.48 V) VBat: +2.14 V (min = +2.70 V, max = +3.29 V) fan1: 0 RPM (min = 3000 RPM, div = 2) fan2: 0 RPM (min = 3000 RPM, div = 2) fan3: 0 RPM (min = 3000 RPM, div = 2) temp1: +24 C (limit = +60 C, hysteresis = +50 C, sensor = thermistor) temp2: +23.0 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor) temp3: +28.0 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor) vid: +2.10 V alarms: Chassis intrusion detection beep_enable:
Sound alarm enabled
w83782d-isa-0290 Adapter: ISA adapter Algorithm: ISA algorithm VCore 1: +2.14 V (min = +1.88 V, max = +2.30 V) VCore 2: +1.50 V (min = +1.88 V, max = +2.30 V) +3.3V: +3.36 V (min = +2.97 V, max = +3.63 V) +5V: +5.16 V (min = +4.50 V, max = +5.48 V) +12V: +11.89 V (min = +10.79 V, max = +13.11 V) -12V: -12.03 V (min = -13.21 V, max = -10.90 V) -5V: -5.10 V (min = -5.51 V, max = -4.51 V) V5SB: +4.94 V (min = +4.50 V, max = +5.48 V) VBat: +2.14 V (min = +2.70 V, max = +3.29 V) fan1: 0 RPM (min = 3000 RPM, div = 2) fan2: 0 RPM (min = 3000 RPM, div = 2) fan3: 0 RPM (min = 3000 RPM, div = 2) temp1: +24 C (limit = +60 C, hysteresis = +50 C, sensor = thermistor) temp2: +23.0 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor) temp3: +28.5 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor) vid: +2.10 V alarms: Chassis intrusion detection beep_enable:
Sound alarm enabled
Please let me know if I can send any other information that might help, and thanks again, rick --- What we call VCore2 is just the second voltage sensor; it could be used for anything (though connecting it to the second processor is advised in the datasheet), and obviously it is connected to something else in your case. There is no need to worry.
Frodo
