root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Chgset Date Author Log Message
(edit) @5337 [5337] 5 years khali Add MAX1618 detection.
(edit) @5332 [5332] 5 years khali W83627DHG has no subclients.
(edit) @5331 [5331] 5 years khali Prevent misdetection of W83627DHG (and more generally, Winbond chips) on …
(edit) @5329 [5329] 5 years khali Change default for MINTEMP from 0 to 20 degrees C. Computers never run at …
(edit) @5328 [5328] 5 years khali Skip MINSTOP and MINSTART tests if fan can't stop.
(edit) @5327 [5327] 5 years khali Determine MINSTOP automatically.
(edit) @5326 [5326] 5 years khali Detect and report obviously incorrect fan speeds.
(edit) @5324 [5324] 5 years khali Use the same step values for the MINSTOP test as we do for the detailed …
(edit) @5323 [5323] 5 years khali Test MINSTOP before MINSTART. We know that MINSTART can't be less than …
(edit) @5318 [5318] 5 years khali Fix MINSTOP and MINSTART test functions. PWM must be enabled for the …
(edit) @5317 [5317] 5 years khali Tell the user about gnuplot if isn't installed.
(edit) @5314 [5314] 5 years khali An updated TMP411 datasheet actually shows that this chip has different …
(edit) @5308 [5308] 5 years khali Add ITE IT8720 detection. No datasheet available yet.
(edit) @5303 [5303] 5 years khali Add detection of VIA VT1212 and SMSC EMC2700LPC Super IOs. Patch from …
(edit) @5302 [5302] 5 years khali The free_expr() function is no longer static in lib/init.c (it is also …
(edit) @5300 [5300] 5 years khali Add Maxim MAX6646, MAX6647 and MAX6649 detection.
(edit) @5290 [5290] 5 years khali We have a driver for the Winbond W83L786NR/NG/R/G now. Closes ticket …
(edit) @5288 [5288] 5 years khali Add VIA C7 detection. Patch from Juerg Haefliger.
(edit) @5282 [5282] 5 years khali Fix Analog Devices ADT7461 detection.
(edit) @5281 [5281] 5 years khali Add Texas Instruments THMC51 detection.
(edit) @5276 [5276] 5 years khali Fix Andigilog aSC7621 detection.
(edit) @5275 [5275] 5 years khali Merge several alias detection functions. Drop unused parameter of …
(edit) @5271 [5271] 5 years khali Don't use named pipes when we don't need them. Named pipes have been …
(edit) @5270 [5270] 5 years khali Add Maxim MAX6654/MAX6690 detection. Add National Semiconductor LM95231 …
(edit) @5266 [5266] 5 years khali Cache the byte data reads. As we keep reading the same registers over and …
(edit) @5264 [5264] 5 years khali Improve MAX6657, MAX6658, MAX6659 detection. Adjust the confidence value …
(edit) @5261 [5261] 5 years khali Identify the lm85-compatible chips individually. The previous method was …
(edit) @5258 [5258] 5 years khali Add Intel SCH (bus) support.
(edit) @5254 [5254] 5 years khali Prepare for release.
(edit) @5252 [5252] 5 years khali Fix support of multiple chip names on the command line. It got broken …
(edit) @5249 [5249] 5 years khali Add Dallas DS1631 detection.
(edit) @5246 [5246] 5 years khali Rework all device detection routines which use SMBus read word …
(edit) @5245 [5245] 5 years khali Try to detect 1-register-only devices, which are designed to be accessed …
(edit) @5243 [5243] 5 years khali Fix the parsing of I2C addresses not to scan.
(edit) @5235 [5235] 5 years khali Don't probe I2C addresses 0x40-0x47. We only probed them for the MAX6633, …
(edit) @5229 [5229] 5 years khali Add Intel ICH10 (bus) detection.
(edit) @5227 [5227] 5 years khali Add Asus F8000 detection.
(edit) @5214 [5214] 5 years khali Add National Semiconductor LM64 detection.
(edit) @5192 [5192] 5 years khali Add SMSC SCH5127 detection. Patch from Juerg Haefliger.
(edit) @5189 [5189] 5 years khali Delete the FAQ. It is now maintained on the wiki: …
(edit) @5186 [5186] 5 years khali Minor readability adjustments.
(edit) @5185 [5185] 5 years djwong Subject: [PATCH 3/3 v3]: sensors: Automatically scale energy/power units …
(edit) @5184 [5184] 5 years djwong Subject: [PATCH 3/4 v2] sensors: Print energy and power meters Display …
(edit) @5183 [5183] 5 years djwong Subject: [PATCH 1/3 v3] libsensors: Support energy and power meters Add …
(edit) @5180 [5180] 5 years khali pwmconfig: Don't start if fancontrol is running. fancontrol: Don't start …
(edit) @5179 [5179] 5 years khali Don't create the configuration file before it's needed. Don't preserve …
(edit) @5176 [5176] 5 years khali Add support for virtual hwmon devices. This closes Red Hat bug #437637 and …
(edit) @5175 [5175] 5 years khali We start at the end of the chip list, going backwards, and we want the …
(edit) @5169 [5169] 5 years khali The configuration file is currently parsed in the locale set by the main …
(edit) @5134 [5134] 5 years khali Use func instead of FUNCTION. The former is standard, the latter …
(edit) @5133 [5133] 5 years khali New device ID for the SMSC SCH5317. …
(edit) @5131 [5131] 5 years jwrdegoede run chip_special_cases() earlier so that the special chips get added to …
(edit) @5126 [5126] 5 years khali Move south bridge sensor detection to the right section.
(edit) @5124 [5124] 5 years khali Do not access I/O ports on PPC.
(edit) @5117 [5117] 5 years khali Add SMSC SCH5027D detection. Patch from Juerg Haefliger.
(edit) @5114 [5114] 5 years khali Prepare for release.
(edit) @5110 [5110] 5 years khali Fix previous commit.
(edit) @5108 [5108] 5 years khali Add Fintek F71858DG and F81216D detection.
(edit) @5107 [5107] 5 years khali Document the variable overriding mechanism (#2296).
(edit) @5103 [5103] 5 years khali Fix duplicate warning message when configuration file is broken.
(edit) @5102 [5102] 5 years khali Detect improperly formatted FCTEMPS value (#2293).
(edit) @5098 [5098] 5 years khali Repeat available configuration options before prompt (#2289). The code …
(edit) @5097 [5097] 5 years khali Lower the confidence value of the MAX6650/MAX6651 from 4 to 3. These chips …
(edit) @5094 [5094] 5 years khali Add detection of the SMSC SCH5514 Super-IO. The chip doesn't contain HW …
(edit) @5093 [5093] 5 years khali Add support for drivers that place the hwmon attributes in the hwmon class …
(edit) @5092 [5092] 5 years khali Get the device type from the subsystem symlink, rather than guessing it …
(edit) @5090 [5090] 5 years khali Fix error path on library initialization error. Only call fclose() if we …
(edit) @5082 [5082] 5 years khali Add support for the 82801AA (ICH).
(edit) @5080 [5080] 5 years khali Improve sysconfig and modprobe.d integration, based on suggestions by Gary …
(edit) @5076 [5076] 5 years khali sensors.conf.eg: Fix voltage value references in compute statements. The …
(edit) @5072 [5072] 5 years khali sensord: Drop workaround needed by old versions of rrdtool. The bug …
(edit) @5070 [5070] 5 years khali sensord: Use the same colors for daily and weekly charts.
(edit) @5069 [5069] 5 years khali sensord: Fix rrd support (#2276).
(edit) @5067 [5067] 5 years khali libsensors: No longer depend on libsysfs. Instead, access sysfs directly, …
(edit) @5063 [5063] 5 years khali Warn about outputs found in automatic mode.
(edit) @5061 [5061] 5 years khali Really hide errors on sysfs writes. Deal gracefully with read-only …
(edit) @5056 [5056] 5 years khali Update the application writing guidelines: * The drivers are no longer in …
(edit) @5048 [5048] 5 years ruik Add Intel Celeron 4xx and Intel Core 2 CPUs on 45nm (Penryn) detection.
(edit) @5047 [5047] 5 years khali No warnings about ld configuration for staged installations, as these make …
(edit) @5045 [5045] 5 years khali Drop detection of the Philips Semiconductors PCA9540. This is an I2C …
(edit) @5038 [5038] 5 years khali Release 3.0.0.
(edit) @5034 [5034] 5 years khali Fix MODULE_DIR usage.
(edit) @5025 [5025] 6 years khali pwmconfig: Give the fans some time to spin up.
(edit) @5023 [5023] 6 years khali pwmconfig: Better diagnostics in pwmdisable.
(edit) @5016 [5016] 6 years khali Stop probing I2C addresses 0x20-0x27 for the LM78, LM79, W83781D and …
(edit) @5009 [5009] 6 years khali sensors-detect: Add SMSC LPC47B367-NC detection. We have no datasheet, but …
(edit) @5007 [5007] 6 years khali Mention the f75375s driver. Reported by Christian Emmerich.
(edit) @5000 [5000] 6 years jwrdegoede sensors-detect: Add Texas Instruments TMP401 detection
(edit) @4997 [4997] 6 years khali Release 3.0.0-rc3.
(edit) @4991 [4991] 6 years khali Install sensors as sensors again.
(edit) @4990 [4990] 6 years khali Use /etc/sensors3.conf as the default configuration file. If it can't be …
(edit) @4989 [4989] 6 years khali Make the configuration file optional. Although in most cases it's not very …
(edit) @4988 [4988] 6 years khali Clean up if something goes wrong during initialization. Otherwise we're …
(edit) @4987 [4987] 6 years khali "sensord" no longer needs a default configuration file name. If no file …
(edit) @4986 [4986] 6 years khali "sensors" no longer needs a default configuration file name. If no file …
(edit) @4985 [4985] 6 years khali Let libsensors know the default path to its configuration file. That way, …
(edit) @4977 [4977] 6 years khali sensors: Handle the case where voltage measurements aren't available. This …
(edit) @4973 [4973] 6 years khali sensors: Fix file handle leak on library initialization error.
(edit) @4971 [4971] 6 years khali sensors-detect-stat.pl: Handle alternative chip lists. Ultimately this …
(edit) @4969 [4969] 6 years khali sensord: Reload config on SIGHUP rather than automatically. Reloading the …
Note: See TracRevisionLog for help on using the revision log.