| | 255 | chip "as99127f-*" |
| | 256 | |
| | 257 | # Same as above for w83782d except that in5 and in6 negative voltages |
| | 258 | # are computed as in the w83781d. |
| | 259 | |
| | 260 | label in0 "VCore 1" |
| | 261 | label in1 "VCore 2" |
| | 262 | label in2 "+3.3V" |
| | 263 | label in3 "+5V" |
| | 264 | label in4 "+12V" |
| | 265 | label in5 "-12V" |
| | 266 | label in6 "-5V" |
| | 267 | label in7 "V5SB" |
| | 268 | label in8 "VBat" |
| | 269 | |
| | 270 | compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) |
| | 271 | compute in4 ((28/10)+1)*@ , @/((28/10)+1) |
| | 272 | compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14 |
| | 273 | compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14 |
| | 274 | compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) |
| | 275 | |
| | 276 | # set limits to 5% for the critical voltages |
| | 277 | # set limits to 10% for the non-critical voltages |
| | 278 | # set limits to 20% for the battery voltage |
| | 279 | |
| | 280 | set in0_min vid*0.95 |
| | 281 | set in0_max vid*1.05 |
| | 282 | set in1_min vid*0.95 |
| | 283 | set in1_max vid*1.05 |
| | 284 | set in2_min 3.3 * 0.95 |
| | 285 | set in2_max 3.3 * 1.05 |
| | 286 | set in3_min 5.0 * 0.95 |
| | 287 | set in3_max 5.0 * 1.05 |
| | 288 | set in4_min 12 * 0.90 |
| | 289 | set in4_max 12 * 1.10 |
| | 290 | set in5_min -12 * 0.90 |
| | 291 | set in5_max -12 * 1.10 |
| | 292 | set in6_min -5 * 0.95 |
| | 293 | set in6_max -5 * 1.05 |
| | 294 | set in7_min 5 * 0.95 |
| | 295 | set in7_max 5 * 1.05 |
| | 296 | set in8_min 3.0 * 0.80 |
| | 297 | set in8_max 3.0 * 1.20 |
| | 298 | |
| | 299 | # set up sensor types (thermistor is default) |
| | 300 | # 1 = PII/Celeron Diode; 2 = 3904 transistor; |
| | 301 | # 3435 = thermistor with Beta = 3435 |
| | 302 | # If temperature changes very little, try 1 or 2. |
| | 303 | # set sensor1 1 |
| | 304 | # set sensor2 2 |
| | 305 | # set sensor3 3435 |
| | 306 | |
| | 307 | |
