Changeset 2493

Timestamp:

04/30/04 18:46:39 (9 years ago)

Author:

khali

Message:

Remove mysterious pseudo-white-space characters.

Files:

• lm-sensors/trunk/etc/sensors.conf.eg (modified) (1 diff)

lm-sensors/trunk/etc/sensors.conf.eg

@@ -1960 +1960 @@
 chip "lm85c-*" "adm1027-*" "adt7463-*" "lm85-*" "lm85b-*"
 
-   set temp1_max 50
+   set temp1_max 50
 
 # Voltage inputs
-   label in0   "V1.5"      # AGP on Intel S845WD1-E
-   label in1   "VCore"
-   label in2   "V3.3"
-   label in3   "V5"
-   label in4   "V12"
+   label in0   "V1.5"      # AGP on Intel S845WD1-E
+   label in1   "VCore"
+   label in2   "V3.3"
+   label in3   "V5"
+   label in4   "V12"
 
 # Temperature inputs
-   label temp1  "CPU"
-   label temp2  "Board"
-   label temp3  "Remote"
+   label temp1  "CPU"
+   label temp2  "Board"
+   label temp3  "Remote"
 
 # Fan inputs
-   label fan1   "CPU_Fan"
-#   label fan2   "Fan2"
-#   label fan3   "Fan3"
-#   label fan4   "Fan4"
+   label fan1   "CPU_Fan"
+#   label fan2   "Fan2"
+#   label fan3   "Fan3"
+#   label fan4   "Fan4"
 
 # PWM Outputs
-   label pwm1   "CPU_PWM"
-   label pwm2   "Fan2_PWM"
-   label pwm3   "Fan3_PWM"
-
-# Voltage scaling is done on-chip.  No 'compute' directive
-# should be necessary.  If in0 has external scaling set
+   label pwm1   "CPU_PWM"
+   label pwm2   "Fan2_PWM"
+   label pwm3   "Fan3_PWM"
+
+# Voltage scaling is done on-chip.  No 'compute' directive
+# should be necessary.  If in0 has external scaling set
 # it here.
 
-#   compute in0  @ * 2.5,   @ / 2.5
+#   compute in0  @ * 2.5,   @ / 2.5
 
 # Adjust fans speeds for actual pulses per rev
-#   compute fan1  @ * 2,  @ / 2    # 1 pulse per rev
-#   set fan1_ppr  1                # ADM1027 or ADT7463
-#   compute fan2  @ / 2,  @ * 2    # 4 pulse per rev
-#   set fan2_ppr  4                # ADM1027 or ADT7463
-
-   ignore fan2
-   ignore fan3
-   ignore fan4
+#   compute fan1  @ * 2,  @ / 2    # 1 pulse per rev
+#   set fan1_ppr  1                # ADM1027 or ADT7463
+#   compute fan2  @ / 2,  @ * 2    # 4 pulse per rev
+#   set fan2_ppr  4                # ADM1027 or ADT7463
+
+   ignore fan2
+   ignore fan3
+   ignore fan4
 
 # Set VRM version
-   set vrm  9.1   # Pentium 4
+   set vrm  9.1   # Pentium 4
 
 # Set voltage limits
-   set in0_min  1.5 * 0.95
-   set in0_max  1.5 * 1.05
-   set in1_min  vid * 0.95
-   set in1_max  vid * 1.05
-   set in2_min  3.3 * 0.95
-   set in2_max  3.3 * 1.05
-   set in3_min  5.0 * 0.95
-   set in3_max  5.0 * 1.05
-   set in4_min   12 * 0.95
-   set in4_max   12 * 1.05
+   set in0_min  1.5 * 0.95
+   set in0_max  1.5 * 1.05
+   set in1_min  vid * 0.95
+   set in1_max  vid * 1.05
+   set in2_min  3.3 * 0.95
+   set in2_max  3.3 * 1.05
+   set in3_min  5.0 * 0.95
+   set in3_max  5.0 * 1.05
+   set in4_min   12 * 0.95
+   set in4_max   12 * 1.05
 
 # Set Fan limits
-   set fan1_min 4000
+   set fan1_min 4000
 
 # Set Temp Limits
-   set temp1_min 10
-   set temp1_max 50
-   set temp2_min 10
-   set temp2_max 35
-   set temp3_min 10
-   set temp3_max 35
+   set temp1_min 10
+   set temp1_max 50
+   set temp2_min 10
+   set temp2_max 35
+   set temp3_min 10
+   set temp3_max 35