root/lm-sensors/trunk/CHANGES @ 6024

Revision 6024, 20.9 KB (checked in by groeck, 3 years ago)

Add detection of ITE IT8510E/TE/G, IT8511E/TE/G, IT8513E/F/G, and IT8518E

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm-sensors CHANGES file
5  libsensors: Added support for new sysfs attributes
6              Change sysfs detection to survive upcoming kernel changes
7  sensors: Added support for new sysfs attributes
8           Display both instantaneous and average power if available.
9           Report thermal sensor type 1 as CPU diode
10           Align power values better
11  fancontrol: Support setup where one PWM output controls several fans
12              Output error messages to stderr
13  sensors-detect: Stop calling for PIIX5 SMBus testers
14                  Improve filtering of fake DMI data
15                  Print DMI system/product version if available
16                  Fix loading of the cpuid module
17                  Make LM73 detection less problematic
18                  Add detection of National Semiconductor LM96163
19                  Add detection of GMT G781
20                  Properly handle Super-I/O chips without logical device
21                  Add detection of National Semiconductor LM96080
22                  Add detection of ITE IT8771E
23                  Add detection of ITE IT8781F, IT8782F and IT8783F
24                  Add detection of ITE IT8510E/TE/G, IT8511E/TE/G, IT8513E/F/G, and IT8518E
263.3.1 (2011-07-21)
27  isadump: Add support for word (16-bit) and long (32-bit) reads
28  isaset: Add support for word (16-bit) and long (32-bit) writes
29  sensors.conf.default: Add a section for the EMC6W201
30  sensors-detect: Add AMD family 15h CPU detection
31                  Add detection of ADT7461A / NCT1008
32                  Add detection of ITE IT8516E/F/G
33                  Integrate with systemd
34                  Drop unreliable smart battery detection
35                  Add detection of SMSC EMC6W201
36                  Drop unreliable detection of Maxim MAX6650
37                  Add detection of SMSC EMC2300
38                  Add detection of MAX6642
39                  Add detection of ITE IT8772E
40                  Don't advertise the ipmisensors driver
41                  Add detection of SA56004
42                  Add detection of LM95245
443.3.0 (2011-03-28)
45  Makefile: Check for bison and flex
46  libsensors: Add support for intrusion detection (#2370)
47              Compute MAX_SUBFEATURES at run-time (#2378)
48              Compute MAX_*_SENSOR_TYPES at build time (#2378)
49              Add support for new sysfs attributes (#2379)
50              Add support for humidity sensors
51              Limit symbol visibility
52  sensors.conf.default: Add a section for the W83627THF
53                        Add a section for the SCH5127
54                        Add a section for the W83627UHG
55                        Add a section for the W83795G/ADG
56                        Add a section for the F81865F
57  sensors: Display 3 decimal places in raw output
58           Add support for intrusion detection (#2370)
59           Fix automatic unit selection of 0 value
60           Added support for additional sensor attributes (#2379)
61  sensors-detect: Improve LM90 and W83L771 detection
62                  Fix error seen if I2C bus numbers are not sequential
63                  Add detection of SMSC EMC1423
64                  Add detection of the Analog Devices ADT7410
65                  Add detection of the National Semiconductor LM94
66                  Add detection of the ITE IT8728F
67                  Implement universal detection for coretemp (#2381)
68                  Add detection of Maxim MAX6639
69                  Add detection of SMSC EMC1023, EMC1043, EMC1053, and EMC1063
70                  Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F
71                  Add detection of SMSC EMC1002, EMC1033, EMC1046, EMC1047,
72                        EMC1072, EMC1073, EMC1074, EMC1402, and EMC1424
73                  Fixed address ranges checked for SMSC EMC1403 and EMC1404.
74                  Fix detection of SPD EEPROM on DDR3 memory modules
75                  Add detection of AMD family 12h and 14h thermal sensors
76                  Add detection of EMC6D103S
77                  Add detection of National Semiconductor LM75A
78                  Count DMI chassis type 8 as a laptop
79                  Add detection of SMSC SCH5627
80                  Add detection of many Fintek Super-I/O devices
823.2.0 (2010-10-10)
83  libsensors: Increase MAX_SENSORS_PER_TYPE to 24
84              Map individual beep features
85              Change license to LGPL
86  pwmconfig: Sample all fan speeds before returning to full speed (#2380)
87             Wait for fans to return to full speed only once per PWM
88             Drop legacy invocations of cut
89  sensors.conf.default: W83667HG config is similar to W83627EHF/DHG
90  sensord: Fix support of multiple chips (#2377)
91  sensors: Properly handle sensor input read errors
92  sensors-detect: Give udev time to settle before accessing i2c nodes
93                  Add support for Intel PCH (SMBus)
94                  Add support for SMSC EMC1403 and EMC1404
95                  Fix detection of RB-C3 AMD Family 10h CPU
96                  Add support for SMSC EMC2103
97                  Add support for Fintek F71889ED
98                  Add support for ITE IT8721F
99                  Fix Maxim MAX6690 support
100                  Fix handling of duplicate detections
101                  Add support for STMicroelectronics STTS424
102                  Add support for NXP SE97 / SE97B
103                  Add reference to NCT6771F/NCT6772F/NCT6775F
104                  Add support for several JC42.4 compliant temperature sensors
105                  Add support for ITE IT8512E/F and IT8758E
1073.1.2 (2010-02-02)
108  libsensors: Support upcoming sysfs path to i2c adapters
109              Add support for HID devices
110  fancontrol: Check that all referenced sysfs files exist
111              Check that all devices match the configuration file
112  pwmconfig: Exit immediately if not root
113             Save device paths and names in configuration file
114  sensors.conf.default: Encourage user to not modify this file
115                        Add a section for adt7473 and adt7475
116                        Add a section for adt7476 and adt7490
117  sensord: Don't name our variables "alarm"
118           Major refactoring including
119           - Cleanup of huge functions
120           - Remove needless casts
121           - Fix coding style
122           - Break long lines
123           - Make functions more robust
124           - Remove unused return value
125           - Make CGI script more XHTML compatible
126  sensors: Fix iconv-related build warning in set_degstr
127  sensors-detect: Refer to tmp401 driver if TMP411 is detected
128                  Clean up the discovery of i2c adapters
129                  Report unsupported Access Bus adapters
130                  Add detection for TI's TMP421, TMP422 and TMP423 chips
131                  The SMSC LPC47M233 isn't currently supported
132                  Support upcoming sysfs path to i2c adapters
133                  Rename the modprobe configuration file to lm_sensors.conf
134                  Only report AMD Family 10h CPU with working sensors
135                  Add detection for AMD Family 11h thermal sensors
136                  Add detection for Intel Atom thermal sensors
137                  Add detection for National Semiconductor LM73
138                  Add SMBus detection for AMD Hudson-2
139                  Add detection for Nuvoton W83667HG-B and W83677HG-I
140                  Add detection for Analog Devices ADT7490
141                  Refer to f71882fg driver if F71889FG is detected
142                  Add detecton for Fintek F71869FG
143                  Detect ADT7473 at 0x2c and 0x2d
144                  More known revisions for the ADT7476
145                  Add detection for Nuvoton W83L771AWG/ASG
146                  Add detection for VIA Nano
147                  Add detection for Texas Instruments AMC6821
148                  Add detection for Analog Devices ADT7411
149  sysconfig-lm_sensors-convert: Fix exit code
1513.1.1 (2009-06-21)
152  isadump: Use geteuid instead of getuid so that setuid bit works
153  isaset: Use geteuid instead of getuid so that setuid bit works
154  libsensors: Don't rely on dirent->dt_type being set
155              New method to free the memory allocated for chip names
156  Makefile: Include generated source files in dependency checking
157            Make it possible to skip building of the static library
158  fancontrol: Add support for absolute path to hwmon devices
159  sensord: Remove the hidden commandline interface
160           Introduce struct sensord_arguments
161           Using sigaction for signal handlers
162           Convert to linux coding style
163           Cleanup and refactoring of the source code
164           Don't use the system log when generating a CGI script
165           Disable unit scaling for fan speeds
166           Use daemon logging facility instead of local4 by default
167           Fix a memory leak when a chip name is provided
168  sensors: Fix a memory leak when a chip name is provided
169  sensors-detect: Add nNidia nForce MCP78S SMBus detection
170                  Display Super-I/O address even if LD is disabled
171                  Differentiate between PC8374L and WPCD377I
172                  Use dmidecode to find IPMI interfaces if available
173                  Add Nuvoton W83795G/ADG detection
174                  Add National Semiconductor LM95241 detection
175                  Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection
1773.1.0 "Happy Birthday Lina" (2009-02-28)
178  libsensors: Add support for instantaneous power sensors
179              Add support for current sensors
180              Fix error propagation during expression evaluation
181              Detect excessive recursion depth during expression eval (#2365)
182              Return a string rather than NULL for unknown errors
183              Skip non-file sysfs entries for speed
184              Fix memory leak in scanner when using flex 2.5.9 or later
185              Report configuration file read errors
186              Exit the configuration file parser sooner
187              Free bus statements from the configuration file sooner
188              Read extra configuration files from /etc/sensors.d (#2174)
189              Report the configuration file name on parse errors
190              Add support for ACPI devices
191  libsensors.3: Reformat for clarity
192                Document function sensors_snprintf_chip_name
193                Document error-related functions
194  lm_sensors.init: Support new format of /etc/sysconfig/lm_sensors (#2246)
195                   Drop support for kernels 2.4 and earlier
196  lm_sensors.init.suse: Delete (actual SuSE script is much different)
197  Makefile: Install sensors.conf.default instead of (#2333)
198  pwmconfig: Drop support for kernels 2.4 and earlier
199  fancontrol: Don't round temperature values
200              Drop support for kernels 2.4 and earlier
201              Exit if configuration file can't be read
202              Create pid file only after successful initialization
203  maxilife scripts: Delete (driver never ported to Linux 2.6)
204  sensord: Accept negative temperatures in RRD database
205           Don't bail out on transient errors (#2330)
206  sensors: Add support for instantaneous power sensors
207           Add support for current sensors
208           Fix exit code in error case
209  sensors.conf.5: Lots of additions and reworks
210  sensors.conf.default: New, minimum version of (#2333)
211                        Add sections for the SMSC SCH311x and SCH5027
212 The LM99 offset is now handled in the lm90 driver
213                   Move help section to sensors.conf.5
214                   Add a section for the Asus/Fintek F8000
215  sensors-detect: Fix detection of ADT7463 and LM96000
216                  Add VIA VX800/VX820 SMBus support
217                  Fix detection of Intel 5000 series FB-DIMM AMB
218                  Fix detection of ADT7462
219                  Fix detection of SMSC LPC47M292
220                  Add SMSC LPC47M233 support
221                  Drop support for Linux 2.4 (#2325)
222                  Handle special case chips more efficiently
223                  Fix SMBus detection of W83627EHF and W83627DHG
224                  Get I2C adapter driver names from sysfs (#2328)
225                  Drop old SiS I2C adapter entries
226                  Drop separate LM78-J entry
227                  Merge all Mozart-2 entries
228                  Merge both GL518SM entries into one
229                  Complete GL520SM detection
230                  Improve GL525SM detection a bit
231                  Let kernel 2.6.28 and later handle chips aliases
232                  Unload kernel drivers when we are done with them (#2329)
233                  Fix handling of bus driver names with an underscore
234                  Simplify loading of bus drivers
235                  Fix bus number prediction logic (#2327)
236                  Suggest the sbs driver for smart batteries
237                  Drop alias detection for Super-I/O chips
238                  Move alias detection after all chip detections
239                  Probe chip types from safest to more risky (#2322)
240                  Add an option to skip ISA probes except IPMI
241                  Skip ISA detection by default if a Super I/O was found (#2322)
242                  Do not scan I2C adapters on multimedia cards by default
243                  Skip SMBus probing by default if a Super I/O was found (#2322)
244                  Display I2C address statictics with --stat
245                  Document the new detection order and rules
246                  Gather DMI data and print it at start-up
247                  Always probe the SMBus on Asus, Tyan and Supermicro boards
248                  Move IPMI interface detection to its own section
249                  Skip IPMI probing on laptops
250                  Add Winbond/Nuvoton W83667HG support
251                  Add Intel Core I7 support
252                  Generate new format for /etc/sysconfig/lm_sensors (#2246)
253                  Print warnings about missing modules on screen
254                  Fix detection of older DS1621
255                  Add nNidia nForce MCP67, MCP73, MCP79 SMBus support
256                  Exclude auto-loaded PCI and USB drivers from list (#2368)
257                  Special case probing i2c address 0x73 (to not crash FSC ICs)
258                  Add detection of FSC Hades and Syleus IC's
259                  Add detection of Winbond WPCD377I (no sensors)
260 Delete (functionality merged into sensors-detect)
261  sysconfig-lm_sensors-convert: Sample config file conversion script (#2246)
2633.0.3 (2008-09-28)
264  libsensors: Avoid namespace pollution
265  fancontrol: Don't use named pipes when we don't need them (#2319)
266  pwmconfig: Tell the user about gnuplot if it isn't installed
267             Fix MINSTOP and MINSTART test functions (#2340)
268             Test MINSTOP before MINSTART
269             Use better step values for MINSTOP test
270             Print the revision and date at start-up
271             Detect and report obviously incorrect fan speeds
272             Determine MINSTOP automatically
273             Skip MINSTOP and MINSTART tests if fan can't stop
274             Change default for MINTEMP from 0 to 20 degrees C
275             Add support for attributes in the hwmon class device (#2260)
276             Update manual page
277 Drop "label temp#_crit" statements
278  sensors-detect: Add Intel SCH (bus) support
279                  Add SMSC EMC6D103 support
280                  Improve MAX6657, MAX6658, MAX6659 detection
281                  Cache the byte data reads (#2326)
282                  Add Maxim MAX6654/MAX6690 support
283                  Add National Semiconductor LM95231 support
284                  Add Analog Devices ADT7481 support
285                  Refactor alias detection functions
286                  Fix Andigilog aSC7621 support
287                  Add Texas Instruments THMC51 support
288                  Fix Analog Devices ADT7461 support
289                  Add VIA C7 support
290                  Fix Winbond W83L786NR/NG/R/G support (#2336)
291                  Add Maxim MAX6646/MAX6647/MAX6649 support
292                  Add VIA VT1212 support
293                  Add SMSC EMC2700LPC support
294                  Add ITE IT8720F support
295                  Add Texas Instruments TMP411 support
296                  Prevent misdetection of W83627DHG on I2C as LM78
297                  W83627DHG has no subclients
298                  Add Maxim MAX1618 support
3003.0.2 (2008-05-18)
301  documentation: Delete the FAQ, now maintained on the wiki
302  libsensors: Use __func__ instead of __FUNCTION__
303              Parse the configuration file in C locale
304              Late compute statements override early ones
305              Support virtual hwmon devices (#2309)
306              Support power and energy sensors
307              Support DOS-style configuration files again (#2284)
308  pwmconfig: Don't create the configuration file before it's needed
309             Don't preserve configuration file customizations
310             Fix permissions of the configuration file
311             Don't start if fancontrol is running (#2299)
312  fancontrol: Don't start if already running (#2299)
313              Delete at exit time (#2299)
314  sensord: Fix support of multiple chip names on the command line (#2321)
315  sensors: Print energy and power sensors with automatically scaled units
316  sensors-detect: Add SMSC SCH5027D detection
317                  Do not access I/O ports on PPC
318                  Move south bridge sensor detection to the right section
319                  Run chip_special_cases() earlier
320                  New device ID for the SMSC SCH5317
321                  Add SMSC SCH5127 detection
322                  Add National Semiconductor LM64 detection
323                  Add Asus F8000 detection
324                  Add Intel ICH10 (bus) detection
325                  Don't probe I2C addresses 0x40-0x47
326                  Fix the parsing of I2C addresses not to scan
327                  Detect and skip 1-register-only I2C devices
328                  Avoid SMBus word transactions where possible
329                  Add Dallas DS1631 detection
3313.0.1 (2008-01-28)
332  documentation: Update the application writing guidelines
333  libsensors: No longer depend on libsysfs (#2262)
334              Don't guess the bus type from the device ID format (#2240)
335              Add support for attributes in the hwmon class device (#2260)
336  Makefile: No warnings about ld configuration for staged installations
337            Document the variable overriding mechanism (#2296)
338  pwmconfig: Really hide errors on sysfs writes
339             Deal gracefully with read-only pwm_enable files
340             Warn about outputs found in automatic mode
341             Repeat available configuration options before prompt (#2289)
342             Fix duplicate warning message when config file is broken
343  fancontrol: Detect improperly formatted FCTEMPS value (#2293)
344  sensord: Fix rrd support (#2276)
345           Use the same colors for daily and weekly charts
346           Drop workaround needed by old versions of rrdtool
347  sensors: Fix error path on library initialization error
348 Fix voltage value references (g520sm, lm80, pc87366)
349  sensors-detect: Drop PCA9540 detection
350                  Improve sysconfig and modprobe.d integration
351                  Add SMSC SCH5514D-NS detection (no sensors)
352                  Lower the confidence of MAX6650/MAX6651
353                  Add Fintek F71858DG detection
354                  Add Fintek F81216D detection (no sensors)
355  unhide_ICH_SMBus: Add support for the 82801AA (ICH)
3573.0.0 (2007-11-24)
358  Makefile: Fix MODULE_DIR usage in etc
359            Fix build on PPC
360  pwmconfig: Better diagnostics in pwmdisable
361             Give the fans some time to spin up
362  sensors-detect: Add Texas Instruments TMP401 detection
363                  Mention the f75375s driver
364                  Add SMSC LPC47B367-NC detection (no sensors)
365                  Reduce w83781d/lm78 I2C address probing range
366                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
3683.0.0-rc3 (2007-10-28)
369  libsensors: Add a default configuration file
370              Fix memory leaks on initialization error
371              Make the configuration file optional
372              Change the default configuration file to /etc/sensors3.conf
373  sensord: Reload config on SIGHUP rather than automatically
374           No default configuration file name
375  sensors: Fix file handle leak on library initialization error
376           Handle the case where voltage measurements aren't available
377           No default configuration file name
378           Install as sensors again
379 Install as sensors3.conf
380  sensors-detect: Fix SMSC LPC47B357/M967 detection
381                  Select the right driver for FSC chips
382 Handle alternative chip lists
3843.0.0-rc2 (2007-10-10)
385  useful_addresses.html: Moved to the wiki
386  Makefile: Add sensors-conf-convert to make install
387  libsensors: Notify the caller when writing a value fails
388              Differentiate between different read error types
389              Report I/O errors as such
390  sensord: Log the error code on failure
391           Drop the configuration file search path mechanism (#2259)
392           Manual page update
393  sensors: Fix spurious critical temperature alarm
394           Print error messages to stderr
395           Make error messages more helpful and consistent
396           Better handling of the fault flags
397  sensors-conf-convert: Add a short help text
398  sensors-detect: Fix SMSC SCH311x detection
399                  Add AMD K10 CPU sensor detection
4013.0.0-rc1 (2007-09-25)
402  Initial release
Note: See TracBrowser for help on using the browser.