Context Navigation

CHANGES @ 5333

Revision 5333, 89.5 KB (checked in by khali, 5 years ago)
Prevent misdetection of W83627DHG (and more generally, Winbond chips) on I2C as LM78.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`

Line
1	lm_sensors CHANGES file
2	-----------------------
3
4	SVN-HEAD
5	Library: Avoid namespace pollution
6	Module i2c-i801: Remove verbose debugging messages (2.6 backport)
7	Properly report bus arbitration lost (2.6 backport)
8	Module i2c-piix4: Minor cleanups (2.6 backport)
9	Program pwmconfig: Fix MINSTOP and MINSTART test functions
10	Program sensors-detect: Add VIA VT1212 support
11	Add SMSC EMC2700LPC support
12	Add ITE IT8720 support
13	Add Texas Instruments TMP411 support
14	Prevent misdetection of W83627DHG on I2C as LM78
15
16	2.10.7 (20080701)
17	Library: Don't choke on unrecognized devices, part 2
18	Parse the configuration file in C locale (#2312)
19	Makefile: Fallback to simple depmod if System.map can't be found
20	Module asb100: Remove some dead code (2.6 backport)
21	Module i2c-amd756: Fix functionality flags (2.6 backport)
22	Module i2c-amd756-s4882: Fix an error path (2.6 backport)
23	Module i2c-i801: Drop broken I2C block read support
24	Add ICH10 support
25	Module i2c-piix4: Minor cleanups (2.6 backport)
26	Module i2c-sis5595: Minor cleanups (2.6 backport)
27	Module lm75: Fix an incorrect comment (2.6 backport)
28	Module lm90: Fix LM86 detection (#2335)
29	Module w83l785ts: Don't ask user to report failures (2.6 backport)
30	Program fancontrol: Don't use named pipes when we don't need them (#2319)
31	Program sensord: Add lm90, adm1032, lm99, lm86, max6657, adt7461 support
32	Fix adm1021, adm1023 support with 2.6 kernel (#2334)
33	Program sensors-detect: New device ID for the SMSC SCH5317
34	Add SMSC SCH5127 detection
35	Add National Semiconductor LM64 detection
36	Add Asus F8000 detection
37	Add Intel ICH10 (bus) detection
38	Don't probe I2C addresses 0x40-0x47
39	Fix the parsing of I2C addresses not to scan
40	Detect and skip 1-register-only I2C devices
41	Avoid SMBus word transactions where possible
42	Add Dallas DS1631 detection
43	Fix Andigilog aSC7621 support
44	Fix Analog Devices ADT7461 support
45	Add VIA C7 support
46	Fix Winbond W83L786NR/NG/R/G support (#2336)
47
48	2.10.6 "Welcome Home Lina" (20080306)
49	Library: Fix fschrc and fschmd support
50	Fix sysfs presence detection
51	Don't choke on unrecognized devices, part 1 (#2087)
52	Fix lm93 vid2 access (#2295)
53	No in1 on w83783s
54	Support DOS-style configuration files again (#2284)
55	Makefile: Revert changeset 4738, fix bug #2187 differently
56	Module adm1026: Various cleanups
57	Module eeprom: Hide Sony Vaio serial numbers to regular users (2.6 backport)
58	Drop useless debugging log messages
59	Recognize VGN as a valid Sony Vaio name prefix (2.6 backport)
60	Module gl518sm: Fix fan speed reading (2.6 backport)
61	Module gl520sm: Fix fan speed reading (2.6 backport)
62	Module lm90: Use generic i2c reads during detection (2.6 backport)
63	Module w83627hf: Enable VBAT monitoring (#2282, 2.6 backport)
64	Program decode-dimms.pl: Fix DDR2 SDRAM module speed decoding
65	Update manufacturer IDs.
66	Program decode-vaio.pl: Private data might not be readable by non-root users
67	Print the asset tag
68	Fix the timestamp decoding
69	Program i2cdump: Fix I2C block mode error code
70	Program fancontrol: Detect improperly formatted FCTEMPS value (#2293)
71	Program pwmconfig: Better diagnostics in pwmdisable
72	Give the fans some time to spin up
73	Really hide errors on sysfs writes
74	Deal gracefully with read-only pwm_enable files
75	Warn about outputs found in automatic mode
76	Fix duplicate warning message when config file is broken
77	Program sensord: Add lm85 support
78	Program sensors: Hide spurious errors on missing f71872f voltage inputs
79	Hide spurious errors on missing adm1026 inputs
80	Fix W83783S prefix matching
81	Program sensors-detect: Add Texas Instruments TMP401 detection
82	Mention the f75375s driver
83	Add SMSC LPC47B367-NC detection (no sensors)
84	Reduce w83781d/lm78 I2C address probing range
85	Drop PCA9540 detection
86	Add Intel Celeron 4xx and Penryn (CPU on 45nm)
87	detection
88	Improve sysconfig and modprobe.d integration
89	Add SMSC SCH5514D-NS detection (no sensors)
90	Lower the confidence of MAX6650/MAX6651
91	Add Fintek F71858DG detection
92	Add Fintek F81216D detection (no sensors)
93	Add SMSC SCH5027D detection
94	Do not access I/O ports on PPC
95	Move south bridge sensor detection to the right
96	section
97	Run chip_special_cases() earlier
98	Program unhide_ICH_SMBus: Add support for the 82801AA (ICH)
99
100	2.10.5 (20071024)
101	File i2c-dev.h: Rename I2C_FUNC_SMBUS_HWPEC_CALC to I2C_FUNC_SMBUS_PEC
102	File sensors.conf.eg: Add a thmc50 section
103	File useful_addresses.html: Moved to the wiki
104	Library: Fix a memory leak on error
105	Speed up sensors_get_ignored() a bit
106	Fix thmc50 support for Linux 2.6
107	Fix bmcsensors support for Linux 2.6
108	Fix lm93 VID support for Linux 2.6
109	Fix adm1024 support for Linux 2.6
110	Fix maxilife support for Linux 2.6
111	Fix magnitude of temperature offsets in Linux 2.6
112	Fix adm1026 critical temperature limits for Linux 2.6
113	Fix smsc47m192 temperature faults
114	Add sch311x support
115	Add support for adm1022 temp3
116	Makefile: Fix kernel version detection (#2187)
117	Man page sensord.8: Update
118	Module fscher: Add missing read of control register (2.6 backport)
119	Module i2c-i801: Add Tolapai support (2.6 backport)
120	Module i2c-nforce2: Declare PEC as supported (2.6 backport)
121	Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
122	Module lm93: Fix an array overrun (2.6 backport)
123	Program sensord: Fix f71805f fans
124	Synchronize the version with lm-sensors
125	Fix a memory leak when daemonizing
126	Fix memory leaks in command line parsing
127	Add w83793 support
128	Log the error code on failure
129	Add lm87 support
130	Program sensors: Fix two memory leaks on error
131	Add sch311x support
132	Hide error on missing dme1737 fan and pwm
133	Add thmc50/adm1022 support
134	Hide error on missing adm1021 die code
135	Handle gl518sm with no voltage input values
136	Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
137	Add Winbond W83L786NR/NG/R/G detection
138	Add Winbond W83L771W/G detection
139	Add Intel Tolapai SMBus detection
140	Fix SMSC SCH311x detection
141	Add AMD K10 CPU sensor detection
142	Fix SMSC LPC47B357/M967 detection
143	Select the right driver for FSC chips
144	Program sensors-detect-stat.pl: Handle alternative chip lists
145
146
147	2.10.4 (20070716)
148	File doc/vid: Update the sysfs paths, update the chip lists
149	File i2c-dev.h: Support I2C block reads with specified length
150	File sensors.conf.eg: Add a dme1737 section
151	File lm_sensors.sysconfig: Delete, now generated by sensors-detect
152	Library: Clean up pwm symbol names translation
153	Add dme1737 support
154	Add applesmc support
155	Add abituguru3 support
156	Add f71882fg support
157	Add w83627ehf support (for Linux 2.4)
158	Add support for the w83627ehf VID function
159	Add support for the w83627ehf thermal sensor types
160	Add support for it87 fan4 and fan5
161	Man page sensors.conf.5: Update the chip statement section
162	Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
163	Module lm85: Fix setting the fan speed min limit to 0
164	Add support for the EMC6D102 extra resolution bits
165	Module thmc50: Fix the i2c address range
166	Module w83627ehf: New (2.6 backport)
167	Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
168	Program i2cdump: Use the new I2C block read function
169	Program isadump: Detect when address bit 7 is a busy flag
170	Fix Super-I/O exit sequence for Winbond/Fintek chips
171	Program fancontrol: Use let for arithmetic evaluation
172	No longer need awk and grep
173	Limit calls to external programs (Linux 2.6 only)
174	Check for configuration file validity
175	Support optional min and max PWM values
176	Better integration with init scripts
177	Use linear control instead of quadratic
178	Program pwmconfig: Use smaller steps for low PWM values
179	Support optional min and max PWM values
180	Program mkpatch: Include w83627ehf
181	Program rrd: Support non-i2c devices (hwmon class)
182	Add missing shell declarations
183	Update URI
184	Program sensors: Drop ddcmon and eeprom support
185	Add dme1737 support
186	Add applesmc support
187	Add max6680 support
188	Add abituguru3 support
189	Add f71882fg support
190	Fix alignment of alarm for one-limit temperatures
191	Add w83627ehf support (for Linux 2.4)
192	Add support for the w83627ehf VID function
193	Add support for the w83627ehf thermal sensor types
194	Add support for it87 fan4 and fan5
195	Display the extra resolution bits of the emc6d102
196	Program sensors-detect: Stop Super-I/O probe after first family success
197	Fix SMSC DME1737 detection
198	Add /usr/sbin to the PATH (#2199)
199	Add ATI SB700 detection
200	Add Maxim MAX6680/MAX6681 detection
201	Add IT8726F detection
202	Fix IPMI support for 2.6 kernels
203	Add detection for non-standard SMSC Super-I/Os
204	No longer depend on i2cdetect
205	Add SMSC SCH5317 detection
206	Drop detection of most non-sensors I2C chips
207	Fix ADM1022 detection
208	Add detection of many SMSC Super-I/O chips
209	Add Fintek F71806FG and F71862FG detection
210
211
212	2.10.3 (20070319)
213	Library: Do not skip i2c adapters with only a class device and no
214	physical device. This change is required to survive the
215	planned struct class_dev removal from future 2.6 kernels.
216	Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
217	Recognize i2c-isa-based devices as such even after class_dev
218	is gone
219	Compile with -D_REENTRANT
220	Fix support of Linux 2.6's max6650 driver
221	Fix max1619 support
222	Man page i2cdetect.8: Scanning range can be restricted
223	Module bmcsensors: Fix debugging messages
224	Module i2c-ali1563: Improve the status messages (2.6 backport)
225	Fix device initialization (2.6 backport)
226	Module i2c-amd8111: Cleanups (2.6 backport)
227	Fix initialization race (2.6 backport)
228	Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
229	Module i2c-piix4: Add ATI SB600 support (2.6 backport)
230	Module i2c-viapro: Add CX700 support (2.6 backport)
231	Module smsc47m1: Add SMSC LPC47M292 support
232	Get rid of a useless semaphore (2.6 backport)
233	Programs i2cdetect, i2cdump, isadump: Flush output in real time
234	Program i2cdump: Cleaner output in SMBus block read mode
235	Program fancontrol.pl: Fix pwmN_enable access (#2190)
236	Program sensors: Add smsc47m2 support (fans)
237	Fix -A option (hide adapter name) on error
238	Program sensors-detect: Only probe relevant I2C addresses
239	Drop ARP-capable device detection
240	Add Maxim MAX6655/MAX6656 detection
241	(Olexiy Avramchenko)
242	Add Maxim MAX1668, MAX1805, MAX1989 detection
243	Add VIA CX700 detection
244	Drop legacy W83627HF ISA detection
245	Don't bufferize stdout during probes
246	Speed up the LM75 and LM77 detection
247	Clean up the EEPROM detection
248	Add Dallas DS75 detection
249	Add SMSC LPC47M292 detection
250	Add nVidia MCP61 and MCP65 detection
251	Fix ADM1028 detection
252	Add Nat. Semi. PC8347L Super-I/O detection
253	Add SMSC SCH5504 Super-I/O detection (no sensors)
254	Make the LM78 and W83781D detection safer
255
256
257	2.10.2 (20070115)
258	RPM: Obsolete, removed
259	File doc/fan-divisors: Update
260	File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
261	Library: Add support for the pc87247 driver (fans only)
262	Probe for busses before chips
263	Drop support for algorithm names
264	Add support for coretemp driver
265	Major update/optimization of config-file scanner
266	Add config-file scanner regression tests
267	Add f71872f support
268	Add w83627dhg support (David Holl, #2157)
269	Get the i2c adapter names from classdev.name
270	Add adm1029 support (Corentin Labbe)
271	Man page i2cdetect.8: Describe the output convention
272	Man page sensors.1: Update (option -c) and clean up
273	Module bmcsensors: Fix several warnings
274	Fix fragile structure initialization
275	Module i2c-i801: Add ICH9 support
276	Module p4b_smbus: Add support for the ICH5
277	Module f71805f: Fix the device address decoding (2.6 backport)
278	Module icspll: Delete. It was useless and dangerous.
279	Program decode-dimms.pl: Remove spaces at end of lines
280	Program eepromer: Fix loads of warnings
281	Program i2cdetect: Make the output clearer
282	Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
283	Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
284	without need of recompilation.
285	Programs dump/*: More robust handling of user inputs
286	Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
287	Add support for non-i2c drivers
288	Program fancontrol.pl: Disable debugging by default
289	Add support for non-i2c drivers
290	More tolerant config file parsing
291	Program sensord: Add pc87247 support (fans only)
292	Add vt1211 support (#2150)
293	Add w83627dhg support (David Holl, #2157)
294	Add w83627ehf voltage support (Dave Platt)
295	Add k8temp support (Dave Platt)
296	Program sensors: Add pc87247 support (fans only)
297	Hide error on missing f71805f fan
298	Handle option -c more efficiently
299	Drop option -a (show algorithm names)
300	Add f71872f support
301	Add w83627dhg support (David Holl, #2157)
302	Add adm1029 support (Corentin Labbe)
303	Hide error on missing w83793 temp (Gong Jun)
304	Program sensors-detect: Add SMSC DME1737 detection
305	Add Fintek F71882FG and EPoX EP1308 detection
306	Add Intel Core thermal sensor detection
307	Preallocate memory for I2C_FUNCS ioctl (#2138)
308	Prevent misdetection of MAX6633/MAX6634/MAX6635
309	Add Intel ICH9 detection
310	Add Maxim MAX6648/MAX6692 detection
311	Improve ADM1029 detection
312	Add Andigilog chips detection
313	Add Intel AMB FB-DIMM thermal sensor detection
314	Add ATI SB600 detection
315
316
317	2.10.1 (20060924)
318	File doc/developers/checklist renamed to dev/developers/release_checklist
319	with clarifications and updates for new SVN server.
320	File README.package: Delete.
321	File doc/busses/i2c-piix4: Update (2.6 backport)
322	File doc/developers/sysfs-interface: Update
323	File etc/sensors.conf.eg: Add an smsc47m192 section
324	Comment out all set statements
325	Add an it8716 section
326	Add a w83793 section
327	Adjust the vt1211 section to match the new driver
328	interface
329	Library: Fix device scan when no i2c support is present
330	Add support for W83627EHF voltage inputs and alarms
331	Add support for the smsc47m192 driver
332	Fix all memory leaks (yeah!)
333	Fix no sensors being reported as an error
334	Add support for the IT8716F and IT8718F chips
335	Add support for the W83793 chip (Yuan Mu)
336	Map the 2.6 adm1026's fan8 to fan0
337	Missing sysfs busses and classes are not errors
338	Change vt1211 temp3-7 magnitude from 1 to 3
339	Makefile: Don't grep autoconf.h on user-space targets
340	Fix depmod on non-running kernel version
341	Remove empty include directories on make user_uninstall
342	Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
343	Module i2c-amd756-s4882: Improve static semaphore initialization
344	(2.6 backport)
345	Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
346	Add ICH8 support (2.6 backport)
347	Fix block transaction poll loops (2.6 backport)
348	Remove PCI function check (2.6 backport)
349	Cleanups (2.6 backport)
350	Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
351	Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
352	Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
353	Drop the fix_hstcfg parameter (2.6 backport)
354	Module i2c-viapro: Fix compilation with kernels < 2.4.21
355	Add VT8237A and VT8251
356	Module lm83: Add LM82 support (2.6 backport)
357	Module vt1211: The VT1211 has no in6
358	Rework the voltage and temperature conversions and the
359	temperature input order to match the Linux 2.6 driver
360	Module w83781d: Use real-time alarm registers when possible (2.6 backport)
361	Add specific alarm and beep defines for the W83791D
362	Module w83792d: Fix PWM range (2.6 backport)
363	Program decode-dimms.pl: Decode depending on the memory type
364	Decode the manufacturing date to an ISO8601 date
365	Add the memory size computation and provide brief
366	timing characteritics for SDRAM/DDR/DDR2 memory
367	Add memory size computation for Rambus memory
368	Various output cleanups and fixes
369	Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
370	Program decode-vaio.pl: Detect and skip false positives
371	Program i2cdetect: Add a mode to print adapter functionalities
372	Program i2cdump: Restore bank after bank switching
373	Add new mode W (read word on even register addresses)
374	Program mkpatch: Fix typo breaking f71805f
375	Turn warnings on (-w), and fix them
376	Print a usage message on missing command line parameters
377	Program pwmconfig: Use mktemp instead of tempfile
378	Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
379	Add smsc47m192 support
380	Add abituguru support (Hans de Goede)
381	Fix memory leak when printing an unknown chip
382	Add it8716 and it8718 support
383	Make each it87 fan and fan div optional
384	Print missing w83791d values
385	Add w83793 support (Yuan Mu)
386	The adt7463 may not have in4 (#2119)
387	Hide more vt1211 missing input errors
388	Clearer error messages when no sensors found
389	Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
390	Add ATI IXP200/300/400 SMBus detection
391	Prevent warning on 64-bit PCI addresses
392	Add Fintek F75363SG, F75111R/RG/N, F75121R,
393	F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
394	F75384S/M, F75387SG/RG and F81218D detection
395	Add Winbond W83793R/G and W83627DHG detection
396	Handle the W83791D driver difference between kernels
397	Add nForce4 MCP04, MCP51 and MCP55 detection
398	Add AMD Geode devices detection
399	Add ITE IT8716F and IT8718F detection
400	Add NatSemi/Winbond PC87427 detection
401	Get driver information for busy addresses from
402	sysfs (2.6 only)
403	Drop the ISA IT87xxF detection
404	Check i2c adapter functionalities before probing
405	Add Intel ICH8 SMBus detection
406	Add AMD K8 thermal sensors detection
407	Simplify detection of SiS5595, VIA686 and VT8231
408	Add Analog Devices ADM1033, ADM1034, ADT7462,
409	ADT7466, ADT7470, ADT7473 and ADT7475 detection
410	Check for root user at startup
411	Attempt to be slightly more user-friendly
412	Add VT8237A and VT8251
413	Remove detection of nVidia graphics adapters
414	Use sysfs for PCI device enumeration
415	Add generic PCI SMBus adapter detection
416	Add generic Super-I/O logical device detection
417	Add SMSC LPC47M172/182 detection
418
419
420	2.10.0 (20060214)
421	File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
422	File doc/busses/i2c-viapro: Update (2.6 backport)
423	File doc/chips/via686a: Update (2.6 backport)
424	File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
425	File etc/sensors.conf.eg: Do not set vrm by default
426	File i2c-dev.h: Fix union i2c_smbus_data definition
427	Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
428	Add missing parentheses around macros
429	Drop I2C_FUNC_SMBUS_EMUL
430	Drop I2C_FUNC_SMBUS_*_PEC
431	Drop I2C_SMBUS_*_PEC
432	File sensors_vid.h: Drop default VRM
433	Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
434	This is intentional. Use decode-dimms.pl if you still
435	need your memory SPD data.
436	Library: Big update to use libsysfs. More TODO though.
437	Fix bus matching code for Linux 2.6 (Karsten Petersen)
438	Add f71805f, w83687thf support
439	Add platform drivers support
440	Fix sysctl warnings on x86_64
441	Restore vt1211 temp1
442	Makefile: Compile user-space programs with -Wundef
443	Module i2c-i801: Simplify the hardware PEC code
444	Always set PEC mode explicitly before each transaction
445	Module i2c-i810: Documentation update, PCI IDs cleanup
446	Module i2c-keywest: Remove bus probing code (2.6 backport)
447	Module i2c-nforce2: Remove dead code (2.6 backport)
448	Add the ID of the nForce4 MCP-04 (2.6 backport)
449	Module i2c-via: Remove dead code
450	Module i2c-viapro: Remove dead code
451	Support I2C block read (2.6 backport)
452	Code cleanups (2.6 backport)
453	Improve debug register dump (2.6 backport)
454	Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
455	i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
456	i2c-sis645: Use pci_driver name to request I/O region; do
457	not initialize i2c_adapter name to "unset" (2.6
458	backport)
459	Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
460	(2.6 backport)
461	Module adm9240: Cleanups (2.6 backport)
462	Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
463	Module it87: Minor cleanups
464	Fix fan3_div setting bug (Anton V. Staaf)
465	Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
466	Separate the register read function
467	Add PEC support for the ADM1032
468	Module via686a: Cleanups
469	Module w83627hf: Drop useless initialization step (2.6 backport)
470	Fix in4 for W83627THF and W83637HF (Yuan Mu)
471	Fix alarms (Yuan Mu)
472	Preserve fan min on fan div change (Yuan Mu)
473	Properly handle W83627THF without VID (Yuan Mu)
474	Fix in0 limit settings in "VRM9" mode (Yuan Mu)
475	Add W83687THF support
476	Module w83781d: Drop W83697HF support (Grant Coady)
477	Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
478	Fix fan control mode (PWM/DC) reporting
479	Fix fan div auto-adjust (Yuan Mu)
480	Fix the subclient handling
481	Module w83l785ts: Minor cleanup (2.6 backport)
482	Module vt1211: Restore temp1
483	Modules vt1211, vt8231: Change default VRM to 9.1
484	Program decode-dimms.pl: Add lookup tables for manufacturer names
485	Fix rounding error in PCxxxx speed computation
486	Improve text output
487	Improve speed under Linux 2.6
488	Verify checksum before decoding anything
489	Improve manufacturing location decoding
490	Improve memory type detection
491	Improve part number decoding
492	Program i2cdump: Drop now useless #ifdef tests
493	Fix capability check for continuous byte mode
494	Program i2cget: New
495	Program i2cset: Add PEC support
496	Fix argc check
497	Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
498	Print the correct bus type if bus
499	functionality can be queried
500	Program isadump: Display the real addresses in flat mode
501	Program mkdev.sh: Silently skip already existing nodes
502	Program mkpatch: Include f71805f
503	Program sensord: Do not log algorithm names
504	Drop EEPROM support (Aurelien Jarno)
505	Add W83627EHF, F71805F/FG support
506	Fix PC87365/PC87366 alarms
507	Program sensors: Drop free_the_label
508	Fix compilation with uclibc (no iconv)
509	Add f71805f, w83687thf support
510	Program sensors-detect: Drop algorithm names
511	Do not rely on i2cdetect -l printing algo names
512	Simplify adapter name matching mechanism
513	New address for ADM1032, ADT7461
514	Improve ADT7467, ADT7468 support
515	Fix MAX6659 reported driver
516	Add Fintek F71805F detection
517	Add Analog Devices ADT7476 detection
518	Add Intel 82845G detection
519	Add IT8201R/IT8203R/IT8206R/IT8266R detection
520	Fix udev detection in some corner case
521	Improve DS1621 detection
522	Always prefer ISA access over SMBus access
523
524
525	2.9.2 (20050906)
526	File doc/chips/*: Big update (2.6 backport)
527	Library: Drop ds1780-specific code (now use adm9240)
528	Fix memory leak in sensors_get_label()
529	Support /sys/class/hwmon (Linux 2.6.14+)
530	Limit stack usage in sensors_read_proc_chips()
531	Makefile: Detect 2.6+ kernels and check targets
532	Man page isaset.8: Fix typos
533	Module adm1031: Fix broken kfree() calls
534	Module i2c-ali1563: New (2.6 backport by Winbond)
535	Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
536	Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
537	w83627hf.c: Tag find function __init
538	Module lm93: Fix memory leak
539	Module smsc47m1: Fix PWM enable polarity on read
540	Modules w83627hf, w83781d: Allow setting fan divisor to 128
541	Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
542	Added DDR/DDR2 frequency reporting in convenient
543	form of DDRxxx PCyyyy
544	Program i2cdump: Properly handle short i2c block reads
545	Program fancontrol.pl: Fix compile errors
546	Program mkpatch: Include i2c-ali1563
547	Include w83792d
548	Program pwmconfig: Fix unsafe temporary file use
549	Program rrd: Support 2.6 kernels
550	Program sensord: Add support for w83637hf
551	Support pc87360 (Henrik Brix Andersen)
552	Program sensors: Support the VAIO "VGN" prefix for eeprom
553	Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
554	Advertise the w83792d driver
555	Improve IT8705F and IT8712F detection
556	Merge LM82 and LM83 detection
557	Add W83687THF detection
558
559
560	2.9.1 (20050412)
561	File doc/busses/i2c-nforce2: Update
562	File doc/chips/it87: Update
563	File doc/chips/lm90: Update for adt7461
564	File doc/chips/mic74: New
565	File etc/sensors.conf.eg: New sections for lm92 and w83792d
566	Library: Add support for 2.6 fscpos driver (Stefan Ott)
567	Fix sis5595 in4 (Aurelien Jarno)
568	Add support for 2.6 gl520sm driver (Maarten Deprez)
569	Add support for 2.6 bmcsensors driver (Yani Ioannou)
570	Add support for w83792d (Chunhao Huang/Winbond)
571	Add support for 2.6 adt7461 (James Chapman)
572	Add support for 2.6 lm92
573	Add support for 2.6 vt1211
574	Add preliminary support for 2.6 w83627ehf
575	Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
576	Use -fno-strict-aliasing on all architectures
577	Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
578	Module bmcsensors: Fix compile error
579	Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
580	Module ds1621: Fix detection (Aurelien Jarno)
581	Module eeprom: Discard SPD-centric checksum module parameter
582	Cleanup detection function (backport from Linux 2.6)
583	Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
584	Module i2c-i801: Temporarily disable broken I2C block read
585	Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
586	Gelato)
587	Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
588	Module i2c-viapro: Prevent repeated resets
589	Module it87: Improve Super-I/O detection
590	Limit I2C address range
591	Support VID on the IT8712F
592	Module lm75: Only initialize CMP/INT bit
593	Module lm78: Fix bug with setting negative temperature limits
594	Module lm85: Properly differentiate between ADM1027 and ADT7463
595	Add EMC6D102 support
596	Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
597	Add limited ADT7461 support
598	Module lm93: Fix IN10 (+5V) scaling
599	Module mic74: New
600	Module w83627hf: Support secondary Super-I/O address
601	Enable temp2 and temp3 if they are disabled
602	Module w83781d: Revert AS99127F temp2 and temp3 computation change
603	Skip final initialization step for AS99127F chips
604	Module w83792d: New (Chunhao Huang/Winbond)
605	Program ddcmon: New; user-space replacement for the ddcmon driver
606	Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
607	Program isadump: Handle Super-I/O keys
608	Program lm_sensors.init: Cleanups (Axel Thimm)
609	Program mkdev.sh: Add basic command-line interface
610	Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
611	Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
612	Don't complain about read-only enable files (lm85)
613	Fix handling of alternate config file name
614	Program sensord: Fix erroneous error message (Aurelien Jarno)
615	Support sis5595 in4 (Aurelien Jarno)
616	Support w83627thf
617	Support the separate it8712 prefix (Aurelien Jarno)
618	Program sensors: Display sis5595 in4 (Aurelien Jarno)
619	No errors on missing pc87360 fans
620	Add gl520sm support (Maarten Deprez)
621	Improve vt1211 error/ignore handling (Michael Carland)
622	Support w83792d, w83627ehf
623	Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
624	Improve IT8705F and IT8712F detection
625	Improve udev detection
626	Fix DS1621 detection
627	Add W83627EHF detection
628	Add ATI SMBus detection
629	Add VT1211 alias detection
630	Warn if chip modules not found
631	Add i2c-ipmi to list if bmcsensors is on it
632	Add PC87591 detection
633	Search for correct udev db file name
634	Add nForce3 250Gb and nForce4 detection
635
636
637	2.9.0 (20041228)
638	NOTE: Requires i2c-2.9.0 or newer!
639	File README.thinkpad: Update
640	File doc/chips/it87: Cleanups
641	File doc/chips/lm63: New
642	File etc/sensors.conf.eg: Set via686a voltage limits
643	File kernel/chips/Module.mk: Resync module list with mkpatch
644	File kernel/include/sensors_compat.h: Define __devexit_p if missing
645	(kernels 2.4.16 and older)
646	Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
647	and dec_use removed in release 2.8.0
648	Modules (all chip drivers): Remove owner from i2c_driver; pass
649	controlling_mod to i2c_register_entry() again
650	Module bmcsensors: Support function 1/x
651	Module i2c-amd756: Display the real bus name
652	Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
653	Module i2c-i801: Support i2c block read (ICH5 and higher)
654	Add PEC support for ICH6
655	Add support for ICH7
656	Module i2c-ipmb: Remove from build since it doesn't work
657	Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
658	Module icspll: Fix compilation
659	Module lm63: New driver for the National Semiconductor LM63
660	Module lm83: Use signed types for temperatures
661	Check limits on register writes
662	Module lm87: Round voltages properly
663	Retry on read errors (David Knierim)
664	Less agressive init (no reset)
665	Module lm90: Use signed types for temperatures
666	Check limits on register writes
667	Module lm93: Added module parameter for VID pin input thresholds.
668	Fix typo in dynamic VID alarms
669	Adds a couple log messages for failed transactions (David
670	Knierim)
671	Fix compilation breaking C99-ism (Axel Thimm)
672	Fix block read retries
673	Module pc87360: Support secondary Super-I/O address
674	Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
675	Library: Add lm63 support
676	Add lpc47b397 support
677	Programs *.init: Rename lockfile to match file name
678	Programs i2cset, isaset: Written byte/word can be masked
679	Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
680	Program mkpatch: Include i2c-amd756-s4882
681	Program pwmconfig: Handle new (well, back to old) pwm files names for
682	Linux 2.6.10 and up
683	Program sensord: Do not scale load average (Aurelien Jarno)
684	Program sensors: Add lm63, lpc47b397 support
685	Support DDR2 memory module EEPROMs (Rudolf Marek)
686	Support only one location for the default configuration file
687	Display the default configuration file location in --help
688	Simplify the configuration file opening code
689	Program sensors-detect: Improve LM63 detection
690	Discard IBM Thinkpad detection code
691	Add PCA9556, LPC47B397, ICH7 detection
692	Fix W83792D detection, add W83791SD detection
693
694
695	2.8.8 (20041007)
696	File doc/donations: Update
697	File doc/lm_sensors-FAQ.texi: Add 4.6.1
698	Update 4.7
699	File doc/chips/gl518sm: Update "iterate" info
700	File doc/chips/it87: Discard outdated module parameters
701	File doc/chips/lm75: LM77 is not supported
702	File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
703	File doc/chips/lm93: New
704	File doc/chips/w83l785ts: Improvements
705	File etc/sensors.conf.eg: Fix it87 lines order
706	Update lm87 section
707	File kernel/include/sensors_vid.h: Support VRM 10.0
708	Library: Support 2.6 adm1025
709	Preliminary support for 2.6 lm87
710	Support 2.6 adm9240
711	Allow an alternative sysfs file name for chip features (2.6)
712	Fix lm83 critical limits (2.6)
713	Add lm93 support
714	Prevent some procfs errors from being silently ignored
715	Makefiles: Implement user_uninstall (Rudolf Marek)
716	Spoof LOGNAME and HOSTNAME when making html man pages
717	Module adm1025: Refine detection
718	Update limit registers again (revert of 2.8.1)
719	Init high limits if they read 0
720	Fix conversions
721	Module lm75: Refine detection
722	Module lm78: Fix init
723	Module lm83: Default to kind lm83 if forced.
724	Fix temperature macros.
725	Module lm90: Add LM86, MAX6657 and MAX6658 support
726	Module lm93: New
727	Module mtp008: Fix the setting of limits on temp2
728	Module pca9540: Refine detection
729	Module pc87360: Change voltage/thermistor magnitude from 2 to 3
730	Support VID
731	Fix fan_div file when fan count is less than 3
732	Additional init and debug
733	Module smsc47m1: Fix pwm_enable being inverted
734	Module w83627hf: Add alternate VCORE/in0 calculation method
735	Remove reset of chip by driver on initialization
736	Module w83781d: Fix default VRM for w83791d
737	Module w83l785ts: Implement read error handling (backport from 2.6)
738	Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
739	Wait for user input to continue (as opposed to 5 sec
740	delay), can be skipped with -y
741	Various cleanups and code refactoring
742	Update manual pages
743	Program fancontrol.init: New (Dean Takemori)
744	Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
745	Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
746	(Giuseppe Della Bianca)
747	Program mkdev.sh: Detect devfs and refuse to run
748	Use mknod's mode instead of chmod
749	Program mkpatch: Include xeontemp and pc87360
750	Program sensors: Rework adm1025 support
751	Display pc87365/pc87366 VID
752	Improve smsc47m1 support
753	Hide 2.6 adm1027 alarm_mask being missing
754	Print VRM version for all supported chips
755	Program sensors-detect: Support LM93, LM77, LM63
756	Support PC8739x Super-I/O family (no sensors)
757	Fix PCA9540 support
758	Refine ADM1025/ADM1025A detection
759	Refine LM75 detection
760	Ignore missing /proc/modules (Andras Bali)
761	Script-wide Perl cleanups
762	Support udev
763	Support W83792D, LM96000
764
765
766	2.8.7 (20040611)
767	File README.thinkpad: Update 24RF08 status
768	File doc/fan-divisors: More info on accuracy
769	File doc/lm_sensors-FAQ.texi: Update 4.27
770	File doc/chips/adm1031: New
771	File doc/chips/max1619: New
772	File doc/chips/pc87360-fan: Renamed to pc87360
773	File doc/chips/pc87360: Big update
774	File doc/chips/w83781d: Update AS99127F documentation
775	File etc/sensors.conf.eg: Add comments about BP6 voltages
776	Add comment on Asus A7V8X-X VCore
777	Misc fixes to lm80 section
778	Update via686a section
779	New lm99 section
780	Add section for LM85-like chips
781	Preliminary pc87366 section
782	Add comment on GL520SM application modes
783	Document beep_enable (Aurelien Jarno)
784	Preliminary max1619 section
785	Preliminary adm1030 and adm1031 sections
786	Library: Fix 2.6 VRM
787	Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
788	Fully support the PC87360 family
789	Support the lm99
790	Add version and date strings
791	Support 2.6 max1619
792	Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
793	Man page i2cdetect.8: document new command line flags
794	Man page i2cdump.8: More details on how i2cdump can write to a chip
795	Modules (all chip drivers): Rework memory allocation scheme.
796	Module adm1031: New (Alexandre d'Alton)
797	Module bmcsensors: Fix oops by creating thread for initialization
798	Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
799	Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
800	asb100.c, lm92.c: Use swab16
801	Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
802	Module gl520sm: Less agressive initialization process
803	Fix temp1 limits being unsettable in application
804	Ensure that temp2 and in4 are not used at the same time
805	Module i2c-i801: Support 6300ESB and ICH6
806	Module i2c-piix4: Don't blacklist IBM with Serverworks chip
807	Module i2c-sis645: Add support for SiS655
808	Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
809	Module lm90: Support LM99 and LM89
810	Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
811	Get rid of useless i2c_probe call
812	Module max1619: New (Alexey Fisher)
813	Module p4b_smbus: Add support for mobile versions of the 82801
814	(Axel Thimm)
815	Module pc87360-fan: Renamed to pc87360
816	Module pc87360: Also support PC87365 and PC87366
817	Add write support
818	Correctly set the chip name depending on the type
819	Add voltage and temperature support
820	Fix fan speed computation
821	Retrieve fans configuration from Super-I/O space
822	Export pwm_enable (read-only)
823	Honor pwm invert bits
824	Clear fan alarms after we read them
825	Do not read fan data when monitoring is disabled
826	Do not include SENSORS_INSMOD stuff
827	New module parameter: init
828	Fan clock dividers change automatically
829	Add thermistor dupport
830	Module smsc47m1: Lock on reads and writes
831	Various PWM fixes
832	Module thmc50: Fix address range
833	Module via686a: Fix voltage roundings
834	Simplify temperature conversions
835	Module w83781d: Drop PWM support for as99127f
836	Invert AS99127F beep bits in driver rather than user-space
837	Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
838	Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
839	Program fancontrol.pl: New
840	Program i2cdetect: Adapt probing method to address
841	Add -q and -r flags to force probing methods
842	Allow probing range selection
843	Program isadump: Major improvements
844	Program isaset: New
845	Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
846	module
847	Include i2c-nforce2
848	Program sensord: New --rrd-no-average parameter
849	Synchronize time slots with rrd
850	Fix W83781D temp3 alarm (Aurelien Jarno)
851	Add ASB100 support (Andrew May)
852	Program sensors: Fully support the PC87360 family
853	Fix lm80 temperature alarms
854	Support the lm99
855	Do not invert AS99127F beep bits anymore
856	Fix W83781D temp3 alarm (Aurelien Jarno)
857	Print library version string
858	Program sensors-detect: Rework Super I/O detection
859	Support SiS655/SiS96x
860	Support ADT7461 and ADT7467
861	Better support for ADM1027, ADT7460 and ADT7463
862	Explicitly support ADM1028
863	Scan all logical devices of PC87365 and PC87366
864	Detect LM92, LM76, MAX6633, MAX6634, MAX6635
865	Detect eeproms with software write protect (not
866	enabled by default)
867	Support ALi 1563 (2.6 only)
868	Drop LTC1710 support
869	Use byte reads for probing on ranges 0x30-0x37 and
870	0x50-0x5F
871	Improve LM89 and LM99 support
872	Support GeForce FX 5900 video cards
873	Fix devfs misdetection (Aurelien Jarno)
874	Detect 6300ESB, ICH6
875	Fix double detection of ISA chips
876	Support MAX1619
877	Support PC87373 Super-I/O
878	Fix unknown adapters appearing multiple times
879	Refine MAX6650/MAX6651 detection
880
881
882	2.8.6 (20040405)
883	File README.thinkpad: Update status
884	File doc/chips/pca9540: New
885	File doc/chips/pc87360-fan: New
886	File etc/sensors.conf.eg: Update pcf8591 default configuration
887	Library: Switch to new sysfs naming standard
888	Fix gcc 3.3 warnings (Philipp Thomas)
889	Support 2.6 ds1621 and pcf8591
890	Change pcf8591 magnitudes
891	Support pc87360-fan
892	Makefile: Install shared library 755
893	Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
894	Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
895	Modules ds1621, pcf8591: Check for capabilities before using them
896	(Aurelien Jarno)
897	Modules pcf8574, pcf8591: Cleanups
898	Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
899	Module adm1021: Better detection and initialization
900	Module pca9540: New driver for the Philips PCA9540
901	Module pc87360-fan: New driver for the National Semiconductor PC87360,
902	PC87363 and PC87364 Super I/O chips
903	Module smsc47m1: Support the LPC47B27x
904	Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
905	Program i2cdetect: Skip special addresses by default
906	Program sensord: Prevent null pointer dereference (Tim Toohey)
907	Program sensors: Print the degree symbol in the terminal's current locale
908	(Aurelien Jarno)
909	Update pcf8591 print to support 2.6 driver
910	Support pc87360-fan
911	Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
912	Improved SiS chips support
913	Add a white list of IBM systems
914	Drop support of undetectable adapters
915	Fix smart battery detection
916	Add smart battery charger and manager detection
917	Rework adm1021 and clones detection
918	The PC87360, PC87363 and PC87364 Super I/O chips
919	now have a (preliminary) driver
920	Rework Super I/O detection
921	Better support of devfs
922	Program sensors-detect-stat.pl: New
923
924
925	2.8.5 (20040305)
926	File doc/chips/SUMMARY: Update
927	File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
928	Makefiles hotplug and rrd: Remove -o and -g arguments to install
929	Module bmcsensors: Increase max SDRs to 100
930	Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
931	Module i2c-amd756: Don't register driver to avoid driver conflicts.
932	(Daniel Rune Jensen)
933	Module it87: Better temperature sensor types handling (Takeru Komoriya)
934	Fix reset=1 (Takeru Komoriya)
935	Module lm80: Code cleanups
936	Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
937	Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
938	Module w83627hf: Add w83637hf support
939	Fix exported name
940	Fix PWM in w83627thf
941	Preserve other bits when forcing temp2/3 to comparator mode
942	Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
943	Remove asb100 support
944	Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
945	Define driver ID if i2c-id.h doesn't have it yet.
946	Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
947	Backport oops fix from Linux 2.6.
948	Modules (all chips): Get rid of useless headers
949	Program decode-edid.pl: Add sysfs support
950	Program sensors: Add w83637hf support
951	Add support for Shuttle Ethernet EEPROMs
952	Drop 2.6 subclient detection
953	Program sensors-detect: Add heuristics to the LM80 detection function
954	Add support for W83L785R, improve W83L784R/AR
955	Add GeForce FX 5600 as supported by rivatv
956	More Super IO chips, better handling
957	Library: Update to match renames in fscher
958	Reverse temporary changes to w83l785ts mappings
959	Fix vt1211 and vt8231 uch_config not being writable
960	Add 2.6 lm80 support
961	Add w83637hf support
962	Remove in6 and temp1 from vt1211 and vt8231
963	Add support for Shuttle Ethernet EEPROMs
964	Remove unused as99127f features
965
966
967	2.8.4 (20040207)
968	File doc/lm_sensors-FAQ.texi: Update 4.20.
969	File doc/chips/it87: Change hyst to low
970	File doc/chips/w83l785ts: New
971	File etc/sensors.conf.eg: Change it87 hyst to low
972	Fix w83697hf supposed to have temp3
973	Limits initialization for adm1025/ne1619
974	Handle fscher voltage conversions
975	Add Tyan Trinity S2495 KT400 setup (Eric
976	Schumann)
977	Fix fscher fan labels (Reinhard Nissl)
978	Library: Better 2.6 eeprom support
979	Change it87 hyst to low
980	Add 2.6 gl518sm, fscher support
981	Fix 2.6 negative voltages handling
982	Temporary fix to w83l785ts mappings
983	Module adm1025: Separate prefix for NE1619
984	Module adm1026: Remove use of temporary ID
985	Define addresses as a range
986	Module bmcsensors: Fix reservations
987	Module fscher: Externalize voltage conversions
988	Module eeprom: Remove memtype
989	Module i2c-piix4: Fix resource release error
990	Various cleanups
991	Program decode-vaio.pl: Add sysfs support
992	Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
993	Drop linux 2.2 support
994	Add w83627hf
995	Program sensors: Do not show algorithm by default
996	Cleanup temperature unit display code
997	Cleanup label spacing code
998	Fix output to UTF-8 terms (Marcel Sebek)
999	Simplify gl518sm print
1000	Do not ignore errors in FSC chips prints
1001	Fix w83l785ts print
1002	Cleanup FSC chips prints
1003	Program sensors-detect: Fix PATH issues
1004	Correctly point to the fscher driver
1005
1006
1007	2.8.3 (20040115)
1008	File lm_sensors.spec: Update
1009	Library: Add 2.6 eeprom, lm90 support
1010	Fix 2.6 temp_hystX for 2.6.1-rc1 and later
1011	Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
1012	Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
1013	Module i2c-amd756: Fix byte writes
1014	Module i2c-tsunami: Cleanups (Daniel Nilsson)
1015	Module it87: Fix sg_tlx writes; fix sensor type reporting;
1016	add 8712 Super I/O detection;
1017	remove initialization of temp_type and fan_ctl;
1018	remove init and temp_type module parameters
1019	Module lm90: Handle hysteresis differently
1020	Module smartbatt: Fix detection, magnitudes, temp
1021	Module w83781d: Fix negative voltages
1022	Module w83l785ts: New
1023	Program eeprog: Make 8 bit mode the default
1024	Program fancontrol: Improvements, fixes, support 2.6 kernels
1025	Program mkpatch: Add lm75.h
1026	Program pwmconfig: Improvements, fixes, support 2.6 kernels
1027	Program sensors: Add ASB100 support
1028	Program sensors-detect: Add 8712 Super I/O detection;
1029	add W83L785TS detection
1030
1031
1032	2.8.2 (20031211)
1033	IMPORTANT: Limit initialization removed from all chip drivers!
1034	If you didn't run 'sensors -s' in the past you may need to now!
1035	File sensors.conf.eg: Change lm75 scaling back to 1;
1036	Add example for asb100
1037	Library: Fix bmcsensors scaling, increase number of sensors;
1038	Add w83627thf support; Advance version to 3.0.0;
1039	Add hermes, ADM1032, ASB100 support;
1040	Add it87 sensor type support;
1041	Add sysfs support for kernel 2.6;
1042	Fix memory leaks
1043	Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
1044	Fail if no kernel .config file exists;
1045	Don't build module dependencies for user and user_install
1046	Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
1047	it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
1048	smsc47m1, thmc50, via686a, w83627hf, w83781d:
1049	Remove initialization of limits by driver.
1050	Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
1051	Modules (chip): Init cleanups
1052	Module asb100: New
1053	Module bmcsensors: Fix voltage scaling, voltage and fan limits
1054	Modules ddcmon, eeprom: Add failure printks
1055	Module fscher: New (Fujitsu-Siemens Hermes driver)
1056	Module i2c-amd756: Fix AMD8111 support
1057	Module i2c-amd8111: Fix byte writes
1058	Module i2c-nforce2: Fix byte writes
1059	Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
1060	Module i2c-sis630: Sync with 2.6.0-X driver version
1061	Module i2c-viapro: Add support for Via 8237
1062	Module it87: Add pwm and "smart guardian" support;
1063	add it87 sensor type support
1064	Module lm75: Fix negative voltages
1065	Module lm90: Add ADM1032 support
1066	Module w83781d: Fix 791d and 627hf detection
1067	Module w83627hf: Add VID support
1068	Program dmidecode: Remove (sensors-detect doesn't need it anymore)
1069	Program eeprog: New
1070	Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
1071	support sysfs for i2c bus search
1072	Program i2cdetect: Add -l option to list busses
1073	Program i2cdump: Add 'c' mode for consective address reads
1074	Program mkpatch: Cleanups
1075	Program pwmconfig: Handle multiple fans controlled by a single pwm
1076	Program sensord: Remove ddcmon support
1077	Program sensors: Add ADM1032 support; add messages for sysfs
1078	Program sensors-detect: Prefer Super I/O drivers;
1079	Fix W83627HF and W83791D detection; detect CSB6;
1080	Detect ADM1029, ADM1030, ADM1031;
1081	Detect W83637HF, W83697UF;
1082	Add it87 sensor type support; add sysfs support
1083	Reduce lm80 misdetects; remove PCFxxxx "detection"
1084	Detect VT8237 (KT600)
1085	Use VPD instead of DMI+ACPI for Thinkpad detection
1086	Suggest new asb100 driver instead of w83781d
1087
1088
1089	2.8.1 (20031005)
1090	NOTE: Requires i2c-2.8.1 or newer!
1091	File sensors.conf.eg: Improved adm1025 section
1092	Default temp labels for as99127f
1093	Improved lm83 section
1094	Better support for Asus A7V8X-X
1095	File doc/chips/SUMMARY: Add SMSC manufacturer ID
1096	File doc/chips/adm1025: Add decent documentation (almost new)
1097	File doc/chips/lm83: Known motherboards list update, misc updates
1098	Library: Change adm1025 names (hyst/over become low/high)
1099	Swap adm1025 temp1 and temp2 to match the driver's order
1100	Advance version to 2.0.1
1101	Update lm83 support
1102	Add support for lm90, xeontemp, max6650
1103	Add separate messages for read and write errors
1104	Add missing message for parse error
1105	Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
1106	Modules (various): Fix includes for compilation on Alpha
1107	Use the new i2c_delay function instead of the various
1108	do_pause functions
1109	Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
1110	Module i2c-nforce2: Cleanups
1111	Module i2c-i810: Use readl/writel for portable access to PCI memory
1112	Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
1113	Module i2c-savage4: Use readl/writel for portable access to PCI memory
1114	Module i2c-sis630: Fix detection
1115	Add block data read/write support
1116	Module i2c-sis645: Detection method change/bugfix
1117	Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
1118	Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
1119	Module adm1025: Major driver update
1120	Add support for Philips NE1619
1121	Simplify the driver a lot (unified voltages, unified
1122	temperatures and much more)
1123	Fix default voltage limits
1124	Change default temperature limits
1125	Swap remote and local temperatures to match the internal
1126	registers order (make the code unification possible)
1127	Export remote diode fault through alarms
1128	Module ddcmon: Major update
1129	Add half a dozen new features
1130	Add checksum parameter (same as for the eeprom module)
1131	Fix monitor limits
1132	Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1133	Module lm78: Fix a fan_div/fan_min bug
1134	Module lm83: Add t_crit and alarms support
1135	Module lm90: New
1136	Module max6650: New
1137	Module saa1064: New
1138	Module smsc47m1: Add support for 47M142
1139	Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1140	enhance w83627thf support
1141	Module w83781d: Enhance chip detection; clean up error returns;
1142	fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1143	Module xeontemp: New
1144	Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1145	Mark Rambus as unsupported
1146	Program decode-edid.pl: New
1147	Interfaces between our eeprom module and
1148	parse-edid from the read-edid project
1149	Program p4b_smbus: Fix SMP compilation
1150	Program sensord: Add support for IT87 (Mike Black)
1151	Change ADM1025 support to match the changes made to
1152	the library
1153	Program sensors: Rewrite and enhance EEPROM support
1154	Change LM83 and ADM1025 support to match the changes
1155	made to the library
1156	Add DRDRAM support to print_eeprom
1157	Exit(1) on /proc write failure (Malte Starostik)
1158	Add LM90, MAX6650 support
1159	Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1160	Add support for LM82, LM86, LM89
1161	Improved W83781D family detection
1162	Add support for AS19927F rev.2, ASB100 Bach
1163	Add support for Asus Mozart-2 (3 types)
1164	Add support for NE1619
1165	Add support for FSC Hermes
1166	Make sure /sbin is in the user's path
1167	Fix EEPROM detection
1168	Automatic module.conf and /dev/i2c* detection
1169	Improve LM82 and LM83 detection
1170	Handle "to-be-written" cleanly
1171	Add detection for 47M14x Super I/O
1172	Handle the one-address-many-chips-same-driver
1173	case
1174
1175
1176	2.8.0 (20030714)
1177	NOTE: Requires i2c-2.8.0 or newer!!!
1178	Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1179	2.4.13 or later required for mkpatch.
1180	File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1181	i2c package
1182	File doc/chips/fscscy: Add watchdog documentation
1183	File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1184	File sensors.h: Now automatically generated
1185	Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1186	add adm1026, lm83, lm85, w83791d support;
1187	Advance version to 2.0.0
1188	Makefiles: Generate warnings if new library won't be found by ld.so;
1189	Modules now install in kernel/drivers/i2c/[busses,chips];
1190	Ensure that headers in /usr/local/include are used first;
1191	Don't use /usr/include headers for modules;
1192	Handle multiple UTS_RELEASE definitions in linux/version.h;
1193	Automatically generate kernel/include/sensors.h;
1194	Remove old gzipped modules; remove old misc directory if empty;
1195	Remove pre-2.4 installation method;
1196	-Wall now the default;
1197	Add new targets user, user_install, and help;
1198	Run depmod after module installation
1199	Modules (all): Cleanups including
1200	- Add #include <i2c-proc.h>
1201	- C99 initializers
1202	- Remove #ifdef MODULE
1203	- Remove #ifndef THIS_MODULE
1204	- Remove #ifndef MODULE_LICENSE
1205	- Remove other 2.1/2.2 #ifdefs
1206	- Remove #include "sensors.h", copy SYSCTL defs to module
1207	- Remove excess #includes
1208	- Remove argument in i2c_register_entry()
1209	- Remove dummy xxx_command() definition
1210	- Remove EXPORT_NO_SYMBOLS
1211	- Remove init_MUTEX #define
1212	- Remove xxx_inc_use() and xxx_dec_use() functions; modules
1213	no longer adjust their own refcounts
1214	- Use module_init() and module_exit()
1215	- Update to new i2c_driver struct definition
1216	Modules (bus PCI): Convert to PCI-module-style initialization
1217	Modules (several): Add support for AMD Opteron VRM (VID) encoding
1218	Module adm1021: Set alarm on failed reads and report old value;
1219	merge changes from kernel 2.5.54
1220	Module adm1026: New
1221	Module bmcsensors: Fix compile when DEBUG=1
1222	Modules ddcmon, eeprom: Use i2c block reads if possible;
1223	better error handling
1224	Module ds1307: Add to Makefile
1225	Module gl520sm: Fix temperature over/hyst writes
1226	Module lm75: merge changes from kernel 2.5.54
1227	Module lm83: New
1228	Module lm85: New
1229	Module i2c-ali1535: Check for invalid transaction
1230	Module i2c-ali15x3: Check for invalid transaction
1231	Module i2c-amd756: merge changes from kernel 2.5.54;
1232	check for invalid transaction
1233	Module i2c-amd8111: merge changes from kernel 2.5.54
1234	Module i2c-i801: Add support for 82801EB (ICH5)
1235	Module i2c-i810: Fix for some chips
1236	Module i2c-nforce2: New
1237	Module i2c-piix4: Check for invalid transaction
1238	Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1239	Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1240	north bridges; SiS962 and SiS963 south bridges
1241	Module i2c-viapro: Check for invalid transaction
1242	Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1243	pwm and pwm enable support; update docs
1244	Module smbus-arp: Check adapter for HW or SW PEC support;
1245	add reset option
1246	Module w83781d: Add support for w83791d
1247	Module w83627hf: New
1248	Program decode-dimms.pl: Recognize DDR and Rambus
1249	Program eeprom: Fix writes for small eeproms
1250	Program eeprom, eepromer: Use local i2c-dev.h for build
1251	Program fancontrol: New
1252	Program lm_sensors.init: Call sensors -s in start()
1253	Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1254	Add adm1026,lm85 support;
1255	Remove sensors.c file; add sensors_compat.h;
1256	Remove patches to i2c-core.c and drivers/char/mem.c;
1257	Now works only for kernels 2.4.13 or later
1258	Program p4b_smbus: Fix 'make install';
1259	Install in same place as other modules;
1260	Clear correct bits in config word
1261	Program pwmconfig: New
1262	Program sensors: add adm1026, lm85, w83791d support
1263	Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1264	w83627hf, w83627thf, w83697hf);
1265	Add support for SiS651, SiS961, SiS745, SiS746;
1266	Support dmidecode 2.0 and later;
1267	Fix "C" format error;
1268	Add support for adm1026, 82801EB (ICH5), W83791D;
1269	Add support for w83l785ts, nForce2;
1270	Fix UTF-8 incompatibility;
1271	Better support for lm75;
1272	Add support for lm83
1273
1274	2.7.0 (20021208)
1275	NOTE: Requires i2c-2.7.0 or newer.
1276	File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1277	File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1278	File doc/busses/i2c-sis645: Add license
1279	File doc/chips/lm92: Add license, features
1280	File doc/chips/maxilife: Add license, parameters, features
1281	File doc/chips/smartbatt: Complete rewrite
1282	File doc/chips/vt8231: Add license, parameters
1283	File sensors.conf.eg: Add section for lm75; complete the lm78 section
1284	Library: Add support for MC1066; add multiple VRM version support for lm87;
1285	enhance adm1023 support; initial support for Sony Vaio eeprom;
1286	add support for bmcsensors; add hacks for additional dummy drivers
1287	Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1288	add flags for x86_64 compiles
1289	Module adm1021: Add support for MC1066
1290	Module bmcsensors: New
1291	Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1292	kernel 2.5.43; fix 2.2 kernel compiles
1293	Module gl518sm: Iterate allowed only for rev 0x00
1294	Module i2c-amd756: Configure base address for nForce support;
1295	check for uninitialized base address;
1296	add support for amd8111 (SMBus 1.0)
1297	Module i2c-amd8111: New (SMBus 2.0)
1298	Module i2c-ipmb: New
1299	Module i2c-ipmi: New
1300	Module i2c-keywest: Sync with kernel 2.4.20
1301	Module i2c-sis630: Add support for SiS730
1302	Module i2c-sis645: Improve support for SiS645/961;
1303	add support for SiS645DX/961 and SiS735;
1304	fix 2.2 kernel compiles
1305	Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1306	Module lm87: Add multiple VRM version support
1307	Module vt1211: Fix inx limits and alarms; fix in0
1308	Module vt8231: Fix inx limits and alarms; fix in0
1309	Module w83781d: Fix in0/in1 initialization
1310	Module smartbatt: New
1311	Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1312	Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1313	stop decoding on checksum error
1314	Program dmidecode: Fix read bug; upgrade to version 1.8
1315	Program doc-insmod: Complete rewrite; fix author output
1316	Program doc-features: Complete rewrite; handle missing sysctl entries;
1317	handle unknown prefix with suggestion
1318	Program lm_sensors.init: Remove spaces bug; add green/red output
1319	Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1320	Program rrd: Add sanity limits to newly-created RRD.
1321	Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1322	Program sensors: Add support for MC1066, Rambus Rimms;
1323	fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1324	initial support for Sony Vaio eeprom
1325	Program sensors-detect: Add support for MC1066, smart battery, 8235,
1326	IPMI, AMD8111; add help if no sensors found;
1327	add ACPI method for IBM system detection;
1328	work with old Perl versions again;
1329	initial support for Sony Vaio eeprom
1330
1331	2.6.5 (20020915)
1332	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1333	File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1334	Library: Fix fan3_div writes for w8378* and it87; add vt8231
1335	Module dmi_scan: new
1336	Module ds1621: Fix enable/disable
1337	Module eeprom: Do not corrupt 24RF08's when checksum=1
1338	Module i2c-i801: Check for uninitialized base address;
1339	enable if not enabled
1340	Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1341	Module i2c-sis630: new
1342	Module i2c-sis645: new
1343	Module lm92: Fix in-kernel initialization
1344	Module via686a: Remove VT8231 support
1345	Module vt8231: new
1346	Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1347	Program dmidecode: new
1348	Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1349	Program mkpatch: Add Config.in entries for, lm92,
1350	pcf8574, pcf8591, smsc47m1, vt1211;
1351	add dmi_scan
1352	Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1353	Program lm_sensors.init: fix stop()
1354	Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1355	add support for logging loadavg in RRD;
1356	fix down-converting raw labels for RRD;
1357	update chip support, still behind sensors
1358	Program sensors: Add /usr/local/etc to config file path;
1359	fix -c and -u flags; add vt8231
1360	Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1361	refuse to run on IBM systems;
1362	fix sysconfig module numbering;
1363	change quick write to not corrupt 24RF08's
1364
1365	2.6.4 (20020719)
1366	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1367	File doc/vid: New
1368	File include/sensors_vid.h: New
1369	File sensors.conf.eg: Add vt1211, smsc47m1
1370	Library: Add multiple VRM version support for adm1025, w83781d;
1371	fix 'flex scanner jammed' on some systems;
1372	add vt1211, smsc47m1, lm92;
1373	fix access mode checking
1374	Makefiles: For 2.4+ kernels, modules now install in
1375	kernel/drivers/[i2c,sensors] , not misc/ , and
1376	'make install' removes old versions in misc/ .
1377	Use $CFLAGS and $CPPFLAGS if defined.
1378	Module adm1025: Add multiple VID version support
1379	Module ds1307: new
1380	Module i2c-amd756: Add nVidia nForce support; fix block read length;
1381	reliability improvements
1382	Module i2c-hydra: Flush posted writes
1383	Module i2c-i801: Add support for 82801DB (ICH4)
1384	Module i2c-i810: Flush posted writes
1385	Module i2c-savage4: new
1386	Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1387	Module i2c-voodoo3: Flush posted writes
1388	Module ds1307: New
1389	Module lm92: New
1390	Module smbus-arp: new
1391	Module smsc47m1: new
1392	Module via686a: Add support for VT8231 sensors
1393	Module vt1211: new
1394	Module w83781d: Add multiple VID version support; fix temp alarms
1395	Program eeprom: new
1396	Program i2cdump: Add smbus block command specification, add PEC support
1397	Program lm_sensors.init: new
1398	Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1399	pcf8574, pcf8591, smsc47m1, vt1211
1400	Program p4b_smbus: Add support for ICH4
1401	Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1402	Program sensord.init: Renamed, was prog/init/sensors
1403	Program sensord: Major update, now requires rrd source;
1404	not compiled by default
1405	Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1406	(don't display algo. and adap.) option;
1407	add vt1211, smsc47m1, lm92
1408	Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1409	add 82801DB, LM85; fix perl warnings;
1410	generate /etc/sysconfig/lm_sensors for
1411	lm_sensors.init script
1412
1413	2.6.3 (20020322)
1414	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1415	Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1416	File doc/chips/it87: add more temp_type help
1417	File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1418	add adm1021 section; add lm87 AIN[1,2] template;
1419	swap negative voltage limits for 782d,783s,627hf,
1420	697hf,it87; add more it87 help; swap neg. voltage
1421	limits for lm78(-j), lm79, w83781d, as99127f
1422	Library: Add PCF8591, W83697HF, ADM1023 support;
1423	fix w83* fan_min computes;
1424	swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1425	Module adm1024: Add MODULE_LICENSE("GPL")
1426	Module bt869: Add s-video out and DVD resolution support
1427	Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1428	Module fscscy: implement min/max for voltages and fans
1429	Module i2c-amd756: Add support for AMD768
1430	Module i2c-i810: Add support for 810E
1431	Module i2c-keywest: Big update, sync with kernel 2.4.18
1432	Module i2c-piix4: Check for uninitialized base address
1433	Module i2c-sis5595: Blacklist 645, 735
1434	Module i2c-viapro: Check for uninitialized base address
1435	Module gl518sm: Standardize /proc entries in0-3
1436	Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1437	fan -> fan1; fix temp2 limit writes
1438	Module pcf8574: Add support for PCF8574A; /proc interface changed
1439	Module pcf8591: new
1440	Module sis5595: Blacklist 645, 735
1441	Module w83781d: Add W83697HF support; allow force_subclients parameter
1442	for Tyan 2460
1443	Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1444	Program decode-vaio.pl: new
1445	Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1446	add text output
1447	Program init/sensors: New SysV init script
1448	Program mkpatch.pl: Add support for fscscy, add more help entries
1449	Program p4b_smbus: new
1450	Program rrd: Install summ_week.cgi
1451	Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1452	clean up chassis intrusion prints
1453	Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1454	fix Via686a and it87 detection;
1455	add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1456	fix uninitialized values; it87 beats lm78
1457
1458	2.6.2 (20011118)
1459	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1460	Chip Modules (all): malloc.h -> slab.h
1461	Modules (all): Add MODULE_LICENSE("GPL")
1462	File doc/FAQ: More updates and additions
1463	File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1464	Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1465	update it87 alarm ID's.
1466	Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1467	Module fscscy: new (Fujitsu-Siemens Scylla driver)
1468	Module i2c-amd756: Improve busy handling/printk's
1469	Module i2c-i801: Add 82801CA/CAM support
1470	Module i2c-keywest: Sync with PPC people, it works now
1471	Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1472	Module i2c-viapro: Add Via VT8233 support
1473	Module it87: Merge alarm_* /proc entries to alarms
1474	Module sis5595: Fix support for rev B0
1475	Module via686a: Make limit initializations reliable
1476	Module w83781d: Allow init=0 parameter to bypass initialization
1477	Program isadump: Add flat address space (PCI) support
1478	Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1479	fscpos, it87, maxilife, mtp008
1480	Program sensors: Fix w83781d temp precision
1481	Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1482	Fujitsu Poseidon and Scylla,
1483	Intel 82443MX and 82801CA/CAM detection,
1484	add ITE 8172G detection (driver in kernel 2.4.10)
1485
1486	2.6.1 (20010830)
1487	File BUGS: Updated
1488	File doc/FAQ: More updates and additions
1489	File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1490	File sensors.conf.eg: Fix/enhance it87 section
1491	Library: ds1621 and it87 updates
1492	Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1493	Module i2c-amd756: Add AMD 766 support
1494	Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1495	Module i2c-piix4: Add Serverworks CSB5 support
1496	Module i2c-sis5595: Recognize unsupported chips and refuse to load
1497	Module adm1025: Fixed temp2 min/max writes
1498	Module ds1621: Add 12-bit precision mode
1499	Module it87: Enable all alarms, add in8 support, add sensor type selection
1500	Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1501	remove support for module
1502	Module sis5595: Recognize unsupported chips and refuse to load
1503	Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1504	Program eepromer: new
1505	Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1506	of sensors.c as a module in kernel
1507	Program sensors: it87 updates; adjust temp. precision for some chips
1508	Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1509	recognize unsupported SiS chips;
1510	recognize AMD 766 and Serverworks CSB5.
1511
1512	2.6.0 (20010612)
1513	NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1514	If your make fails because it can't find <linux/i2c-proc.h>, you
1515	forgot this step!!!
1516	File doc/FAQ: Many, many updates and additions
1517	File doc/busses/i2c-sis5595: new
1518	File doc/busses/i2c-tsunami: new
1519	File doc/chips/it87: new
1520	File doc/chips/via686a: Claim support for 686b.
1521	File README.thinkpad: new
1522	File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1523	Add lm87, adm9240, ds1780, lm81 templates;
1524	Enhance help comments in file;
1525	Add Tyan S2510 dual-MTP008 example;
1526	Make separate sis5595 section.
1527	Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1528	Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1529	Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1530	Add support for maxilife-nba and amd1024;
1531	Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1532	Chip Modules (all ISA): Remove #include "i2c-isa.h"
1533	Chip Modules (all): Change from sensors_* to i2c_* globals
1534	for new i2c-proc.[ch]
1535	Makefiles: enhance to support Alpha architecture
1536	Module adm1021: Fix lm84 and gl523sm support
1537	Module adm1024: new
1538	Module i2c-i801: Chip detection cleanup
1539	Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1540	Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1541	Module i2c-tsunami: New
1542	Module i2c-via: Ensure i2c bus is tristated correctly.
1543	Module it87: new driver for IT8705, IT8712, Sis950 chips
1544	Module lm78: Recognize chipid=0x20
1545	Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1546	Module mtp008: Fix temp initializations;
1547	Save BIOS pin configuration of temps and fans;
1548	Fix sensor type reads/writes and fan min writes;
1549	Fix spurious invalid sensor type messages
1550	Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1551	used for patched kernel now.
1552	Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1553	Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1554	Allow force_addr=0xaddr
1555	Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1556	Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1557	reading changes; Add messages for subclient
1558	registration failure
1559	Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1560	Program i2cset: new
1561	Program isadump: fix for Alpha arch. compiles
1562	Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1563	Remove ltc1710; Fix i2c_sis5595 typo;
1564	Support kernel 2.4.5 makefile change;
1565	Add i2c-tsunami; fixed i2c-voodoo3 configuration
1566	Program sens_update_rrd: new
1567	Program sensord: Add -d (debug) and -p (pid-file) options
1568	Program sensors: Change reported version from 1.3 to the lm_sensors version;
1569	Fix swapped limit and hysteresis on 9240, 5595, 686a;
1570	Change mtp008 temps from max/min to limit/hyst;
1571	Add maxilife-nba, adm1024, it87 support.
1572	Program sensors-detect: Recognize lm78 with chipid=0x20;
1573	Recognize SMSC Victory66 South Bridge;
1574	Add devfs /dev/i2c/x support;
1575	Add adm1024, it87xx support; Add thinkpad warning.
1576	Program tellerstats: new
1577
1578	2.5.5 (20010115)
1579	NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1580	you have kernel 2.4.0-prerelease or greater.
1581	Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1582	File doc/developers/proc: new
1583	File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1584	Library: Add ds1621, mtp008 support
1585	Module adm1021: Add support for adm1021a / adm1023
1586	Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1587	Module adm1025: Add support for remote temp; rename /proc entries to
1588	in[0-5] and temp[1-2]; fix negative temp readings
1589	Module adm9240: Rename /proc entries to in[0-5]
1590	Module ddcmon: allow force and force_ddcmon parameters
1591	Module ds1621: new
1592	Module i2c-ali1535: Enhance error checking and recovery; add mutex
1593	Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1594	Module i2c-piix4: add support for ServerWorks southbridge OSB4
1595	Module lm87: cleanup, update voltage calculations
1596	Module mtp008: new
1597	Module pcf8574: change update time to 5 seconds
1598	Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1599	Module w83781d: fix beep setting via /proc
1600	Programs editticket, readticket: new
1601	Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1602	Program mkpatch.pl: more fixes; now adds many more modules
1603	Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1604	add adm1025 temp2; report temp limits correctly as
1605	min/max or limit/hysteresis; print message if no
1606	sensors are found. Removed false errors from lm87 reads.
1607	Program sensors-detect: Add ds1621, mtp008 detection;
1608	add ServerWorks detection
1609
1610	2.5.4 (20001012)
1611	Module i2c-viapro: Add support for Via 596B (0x3051)
1612	Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1613	Program mkpatch.pl: fixed infinite loop
1614	Program sensors-detect: Detect Via 596B (0x3051)
1615
1616	2.5.3 (20001008)
1617	NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1618	File useful_addresses.html: update
1619	Library: Add lm87 support
1620	Module pcf8574: new
1621	Module i2c-ali1535: new
1622	Module i2c-ali15x3: removed force #ifdef.
1623	Module i2c-i801: support Intel 82801BA (815E chipset)
1624	Module i2c-i801: add i2c block write support, fix smbus block bugs
1625	(requires i2c 2.5.3 package)
1626	Module i2c-i810: support Intel 82815
1627	Module lm87: new
1628	Module sensors: Fix for kernel 2.4.0-test8
1629	(remove copy_to_user_ret and put_user_ret)
1630	Module w83781d: limit fan divisors to 8 max. for as99127f
1631	Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1632	Program i2cdump: Add smbus block read support
1633	Programs i2cdetect, i2cdump: Improve error reporting
1634	Program sensors: new switch -u (--unknown)
1635	Program sensors-detect: detect Intel 82801BA (815E chipset)
1636	Program sensors-detect: detect Intel 82815
1637	Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1638	Program sensors-detect: detect National LM87
1639	Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1640	Program sensors-detect: Improve error reporting
1641
1642	2.5.2 (20000709)
1643	File sensors.conf.eg: Fix lm80 in8 calculation
1644	Module w83781d: W83783S no longer crashes on unloading
1645	Program sensors-detect: more robustness in case of unknown i2c adapters
1646	Program sensors-detect, libsensors: fix eeprom size reporting
1647	Program sensord: more flexibility, support for alarm scanning etc.
1648	Program sensors: support for ignore setting on sensor alarms.
1649	Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1650
1651	2.5.1 (20000618)
1652	Library: Add adm1025 support
1653	Module adm1025: new
1654	Module ddcmon: Fixed bus scan which could hang SMBus
1655	Module i2c-keywest: new
1656	Module maxilife: Add support for Maxilife '99 (NBA)
1657	Module via686a: Enable sensors if not enabled by BIOS
1658	Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1659	Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1660	Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1661	Module w83781d: Fis as99127f fan speed (was 66% too high)
1662	Module w83781d: Improve beep input checking
1663	Program i2cdump: Add Winbond-style bank selection
1664	Program isadump: Add Winbond-style bank selection
1665	Program sensors: Add adm1025 support.
1666	Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1667	Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1668	File sensors.conf.eg: Add Maxilife '99 entries
1669	File sensors.conf.eg: Remove some as99127f entries.
1670	Note: For as99127f, reinstall sensors.conf.eg manually (make install
1671	won't reinstall it) or else 'sensors -s' will fail.
1672
1673	2.5.0 (20000312)
1674	Dropped all kernel 2.0 and 2.1 compatibility
1675	Module i2c-i810: new
1676	Module ddcmon: new
1677	Module via686a: new
1678	Module i2c-amd756: fixed region request
1679	Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1680	Module w83781d: Don't change pin settings at initialization;
1681	also fix chip detection.
1682	Library: Support for ddcmon and via686a
1683	Program sensors-detect: Support for ddcmon and via686a
1684	Program sensors: Support for eeprom, ddcmon and via686a
1685
1686	2.4.5 (20000116)
1687	Introduced DESTDIR installation prefix
1688	Module lm80: fixes, temperature now read and set correctly
1689	Module i2c-voodoo3: driver enhancements
1690	Module w83781d: fixes, AS99127 works much better now
1691	Library: New ignore keyword in config file
1692	Programs: Support for new ignore keyword
1693	Program sensors-detect: Support for MGA detections
1694
1695	2.4.4 (19991201)
1696	Addition of the alpha release of AMD 756 SMBus host support.
1697	Many fixes and updates to the gl518sm driver
1698	Updates and fixes for device detection
1699
1700	2.4.0 (19990920)
1701	Too much to list.
1702	i2c and smbus parts are split off to a separate i2c package.
1703	New drivers and other stuff.
1704
1705	2.3.4 (19990616)
1706	Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1707	All: Now compiles against kernel 2.0.x (again ;)
1708	Module gl518sm: some updates and refinements
1709
1710	2.3.3 (19990603)
1711	All: Now compiles against kernel 2.3.x (x >= 1)
1712	Module i2c-voodoo3: Timing issue fixes
1713	Module bt869: Seems to be functional and relatively well tested
1714	Many modules were modified to be more compatible with the new
1715	Mutex structure in the new experimental kernels.
1716
1717	2.3.2 (19990507)
1718	Module i2c-hydra: Now compiles on 2.0.x kernels
1719	Module i2c-lm75: Slightly better detection
1720	* New, but not compiled by default:
1721	Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1722	Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1723
1724	2.3.1 (19990501)
1725	All: Now compiles on PPC
1726	Module i2c-hydra: NEW
1727	Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1728	Module w83781d: Removed deadlock (mutex was not initialized)
1729	Documentation: A few glitches removed
1730	Makefile: default module installation directory is now
1731	/lib/modules/current/extra/misc
1732	Program sensors-detect: PPC Hydra now detected
1733	Program sensors: Now prints complete GL518SM information
1734	Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1735
1736	2.3.0 (19990422)
1737	All: Many, many changes and improvements
1738	All: Many small bugs and problems removed
1739	Modules: New insmod parameters
1740	Modules: Much improved chip detection
1741	Module maxilife: NEW
1742	Module adm1021: MAX1617A now also supported
1743	Module adm9240: DS1780 now also supported
1744	Module w83781d: W83782D and W83783S now also supported
1745	Program sensors-detect: NEW
1746	Library: All chips now supported
1747	Documentation: Very much improved
1748
1749	2.2.2 (199903??)
1750	Just some minor updates and bug fixes.
1751
1752	2.2.1 (19990218)
1753	All: Removed compile warnings
1754	Module i2c-dev: Small bug removed if DEBUG=1 was used
1755	Module sis5595: Now compiles for 2.0 kernels
1756	Module adm1021: Detection corrected
1757
1758	2.2.0 (19990216)
1759	All: Set copyrights to include 1999
1760	All: Small bugfixes
1761	I2C: Upgraded to newest archive of Simon Vogl
1762	Module i2c-dev: NEW
1763	Module i2c-ali15x3: NEW
1764	Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1765	directories, and somewhat improved
1766	Module sis5595: NEW
1767	Modules: Renamed all bus modules to i2c-*, new directory lay-out
1768	Library: Support for new chip drivers, several small bugs fixed
1769	Library manual pages: NEW
1770	Program i2cdetect: Moved to detect directory
1771	Program detect.pl: NEW
1772	Program doc-features: NEW
1773	Program sensors: Added man-page
1774	Document BUGS: Added cdrom bug and kernel i2c conflict
1775
1776	2.1.2 (19990116)
1777	Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1778	Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1779	Documentation in doc/kernel: NEW
1780
1781	2.1.1 (19990107)
1782	Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1783	and older
1784	Module gl518sm.o: Miscelaneous bugs and problems solved
1785	Program isadump: NEW
1786
1787	2.1.0 (19981230)
1788	Library: Completely NEW
1789	Program sensors: NEW
1790	Program grab_busses: NEW
1791	Program decode-dimms: More information
1792	Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1793	Module w83781d.o: NEW
1794	Module lm80.o: NEW
1795	Module gl518sm.o: new procfile beep, several small updates
1796	Modules: Now use pin readings, no more scaling within the kernel (use the
1797	library instead)
1798
1799	2.0.2 (19981214)
1800	Module eeprom.o: NEW
1801	Program decode-dimms: NEW
1802	Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1803	2.1.58
1804	Modules: Somewhat less verbose on transfers
1805	Module lm78.o now recognizes and handles lm78-j and lm79
1806
1807	2.0.1 (1998121?)
1808	Module gl518sm.o updates, to make it actually work
1809	Module lm75.o high/low-byte swapping write bug fixed
1810
1811	2.0.0 (19981209)
1812	Initial release

Note: See TracBrowser for help on using the browser.

Download in other formats:

Original Format