root/lm-sensors/trunk/CHANGES @ 4747

Revision 4747, 82.8 KB (checked in by khali, 8 years ago)

libsensors: Fix adm1024 support for Linux 2.6.
The driver doesn't exist yet, but at least now the library is ready.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  Library: Fix a memory leak on error
6           Speed up sensors_get_ignored() a bit
7           Fix thmc50 support for Linux 2.6
8           Fix bmcsensors support for Linux 2.6
9           Fix lm93 VID support for Linux 2.6
10           Fix adm1024 support for Linux 2.6
11  Makefile: Fix kernel version detection (#2187)
12  Module fscher: Add missing read of control register (2.6 backport)
13  Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
14  Module lm93: Fix an array overrun (2.6 backport)
15  Program sensors: Fix a memory leak on error (with -u)
16  Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
17                          Add Winbond W83L786NR/NG/R/G detection
18                          Add Winbond W83L771W/G detection
19                          Add Intel Tolapai SMBus detection
222.10.4 (20070716)
23  File doc/vid: Update the sysfs paths, update the chip lists
24  File i2c-dev.h: Support I2C block reads with specified length
25  File Add a dme1737 section
26  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
27  Library: Clean up pwm symbol names translation
28           Add dme1737 support
29           Add applesmc support
30           Add abituguru3 support
31           Add f71882fg support
32           Add w83627ehf support (for Linux 2.4)
33           Add support for the w83627ehf VID function
34           Add support for the w83627ehf thermal sensor types
35           Add support for it87 fan4 and fan5
36  Man page sensors.conf.5: Update the chip statement section
37  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
38  Module lm85: Fix setting the fan speed min limit to 0
39               Add support for the EMC6D102 extra resolution bits
40  Module thmc50: Fix the i2c address range
41  Module w83627ehf: New (2.6 backport)
42  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
43  Program i2cdump: Use the new I2C block read function
44  Program isadump: Detect when address bit 7 is a busy flag
45                   Fix Super-I/O exit sequence for Winbond/Fintek chips
46  Program fancontrol: Use let for arithmetic evaluation
47                      No longer need awk and grep
48                      Limit calls to external programs (Linux 2.6 only)
49                      Check for configuration file validity
50                      Support optional min and max PWM values
51                      Better integration with init scripts
52                      Use linear control instead of quadratic
53  Program pwmconfig: Use smaller steps for low PWM values
54                     Support optional min and max PWM values
55  Program mkpatch: Include w83627ehf
56  Program rrd: Support non-i2c devices (hwmon class)
57               Add missing shell declarations
58               Update URI
59  Program sensors: Drop ddcmon and eeprom support
60                   Add dme1737 support
61                   Add applesmc support
62                   Add max6680 support
63                   Add abituguru3 support
64                   Add f71882fg support
65                   Fix alignment of alarm for one-limit temperatures
66                   Add w83627ehf support (for Linux 2.4)
67                   Add support for the w83627ehf VID function
68                   Add support for the w83627ehf thermal sensor types
69                   Add support for it87 fan4 and fan5
70                   Display the extra resolution bits of the emc6d102
71  Program sensors-detect: Stop Super-I/O probe after first family success
72                          Fix SMSC DME1737 detection
73                          Add /usr/sbin to the PATH (#2199)
74                          Add ATI SB700 detection
75                          Add Maxim MAX6680/MAX6681 detection
76                          Add IT8726F detection
77                          Fix IPMI support for 2.6 kernels
78                          Add detection for non-standard SMSC Super-I/Os
79                          No longer depend on i2cdetect
80                          Add SMSC SCH5317 detection
81                          Drop detection of most non-sensors I2C chips
82                          Fix ADM1022 detection
83                          Add detection of many SMSC Super-I/O chips
84                          Add Fintek F71806FG and F71862FG detection
872.10.3 (20070319)
88  Library: Do not skip i2c adapters with only a class device and no
89            physical device. This change is required to survive the
90            planned struct class_dev removal from future 2.6 kernels.
91           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
92           Recognize i2c-isa-based devices as such even after class_dev
93            is gone
94           Compile with -D_REENTRANT
95           Fix support of Linux 2.6's max6650 driver
96           Fix max1619 support
97  Man page i2cdetect.8: Scanning range can be restricted
98  Module bmcsensors: Fix debugging messages
99  Module i2c-ali1563: Improve the status messages (2.6 backport)
100                      Fix device initialization (2.6 backport)
101  Module i2c-amd8111: Cleanups (2.6 backport)
102                      Fix initialization race (2.6 backport)
103  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
104  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
105  Module i2c-viapro: Add CX700 support (2.6 backport)
106  Module smsc47m1: Add SMSC LPC47M292 support
107                   Get rid of a useless semaphore (2.6 backport)
108  Programs i2cdetect, i2cdump, isadump: Flush output in real time
109  Program i2cdump: Cleaner output in SMBus block read mode
110  Program Fix pwmN_enable access (#2190)
111  Program sensors: Add smsc47m2 support (fans)
112                   Fix -A option (hide adapter name) on error
113  Program sensors-detect: Only probe relevant I2C addresses
114                          Drop ARP-capable device detection
115                          Add Maxim MAX6655/MAX6656 detection
116                           (Olexiy Avramchenko)
117                          Add Maxim MAX1668, MAX1805, MAX1989 detection
118                          Add VIA CX700 detection
119                          Drop legacy W83627HF ISA detection
120                          Don't bufferize stdout during probes
121                          Speed up the LM75 and LM77 detection
122                          Clean up the EEPROM detection
123                          Add Dallas DS75 detection
124                          Add SMSC LPC47M292 detection
125                          Add nVidia MCP61 and MCP65 detection
126                          Fix ADM1028 detection
127                          Add Nat. Semi. PC8347L Super-I/O detection
128                          Add SMSC SCH5504 Super-I/O detection (no sensors)
129                          Make the LM78 and W83781D detection safer
1322.10.2 (20070115)
133  RPM: Obsolete, removed
134  File doc/fan-divisors: Update
135  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
136  Library: Add support for the pc87247 driver (fans only)
137           Probe for busses before chips
138           Drop support for algorithm names
139           Add support for coretemp driver   
140           Major update/optimization of config-file scanner
141           Add config-file scanner regression tests
142           Add f71872f support
143           Add w83627dhg support (David Holl, #2157)
144           Get the i2c adapter names from
145           Add adm1029 support (Corentin Labbe)
146  Man page i2cdetect.8: Describe the output convention
147  Man page sensors.1: Update (option -c) and clean up
148  Module bmcsensors: Fix several warnings
149                     Fix fragile structure initialization
150  Module i2c-i801: Add ICH9 support
151  Module p4b_smbus: Add support for the ICH5
152  Module f71805f: Fix the device address decoding (2.6 backport)
153  Module icspll: Delete. It was useless and dangerous.
154  Program Remove spaces at end of lines
155  Program eepromer: Fix loads of warnings
156  Program i2cdetect: Make the output clearer
157  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
158  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
159                            without need of recompilation.
160  Programs dump/*: More robust handling of user inputs
161  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
162                                  Add support for non-i2c drivers
163  Program Disable debugging by default
164                         Add support for non-i2c drivers
165                         More tolerant config file parsing
166  Program sensord: Add pc87247 support (fans only)
167                   Add vt1211 support (#2150)
168                   Add w83627dhg support (David Holl, #2157)
169                   Add w83627ehf voltage support (Dave Platt)
170                   Add k8temp support (Dave Platt)
171  Program sensors: Add pc87247 support (fans only)
172                   Hide error on missing f71805f fan
173                   Handle option -c more efficiently
174                   Drop option -a (show algorithm names)
175                   Add f71872f support
176                   Add w83627dhg support (David Holl, #2157)
177                   Add adm1029 support (Corentin Labbe)
178                   Hide error on missing w83793 temp (Gong Jun)
179  Program sensors-detect: Add SMSC DME1737 detection
180                          Add Fintek F71882FG and EPoX EP1308 detection
181                          Add Intel Core thermal sensor detection
182                          Preallocate memory for I2C_FUNCS ioctl (#2138)
183                          Prevent misdetection of MAX6633/MAX6634/MAX6635
184                          Add Intel ICH9 detection
185                          Add Maxim MAX6648/MAX6692 detection
186                          Improve ADM1029 detection
187                          Add Andigilog chips detection
188                          Add Intel AMB FB-DIMM thermal sensor detection
189                          Add ATI SB600 detection
1922.10.1 (20060924)
193  File doc/developers/checklist renamed to dev/developers/release_checklist
194          with clarifications and updates for new SVN server.
195  File README.package: Delete.
196  File doc/busses/i2c-piix4: Update (2.6 backport)
197  File doc/developers/sysfs-interface: Update
198  File etc/ Add an smsc47m192 section
199                            Comment out all set statements
200                            Add an it8716 section
201                            Add a w83793 section
202                            Adjust the vt1211 section to match the new driver
203                             interface
204  Library: Fix device scan when no i2c support is present
205           Add support for W83627EHF voltage inputs and alarms
206           Add support for the smsc47m192 driver
207           Fix all memory leaks (yeah!)
208           Fix no sensors being reported as an error
209           Add support for the IT8716F and IT8718F chips
210           Add support for the W83793 chip (Yuan Mu)
211           Map the 2.6 adm1026's fan8 to fan0
212           Missing sysfs busses and classes are not errors
213           Change vt1211 temp3-7 magnitude from 1 to 3
214  Makefile: Don't grep autoconf.h on user-space targets
215            Fix depmod on non-running kernel version
216            Remove empty include directories on make user_uninstall
217  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
218  Module i2c-amd756-s4882: Improve static semaphore initialization
219                           (2.6 backport)
220  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
221                   Add ICH8 support (2.6 backport)
222                   Fix block transaction poll loops (2.6 backport)
223                   Remove PCI function check (2.6 backport)
224                   Cleanups (2.6 backport)
225  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
226  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
227                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
228                    Drop the fix_hstcfg parameter (2.6 backport)
229  Module i2c-viapro: Fix compilation with kernels < 2.4.21
230                     Add VT8237A and VT8251
231  Module lm83: Add LM82 support (2.6 backport)
232  Module vt1211: The VT1211 has no in6
233                 Rework the voltage and temperature conversions and the
234                  temperature input order to match the Linux 2.6 driver
235  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
236                  Add specific alarm and beep defines for the W83791D
237  Module w83792d: Fix PWM range (2.6 backport)
238  Program Decode depending on the memory type
239                           Decode the manufacturing date to an ISO8601 date
240                           Add the memory size computation and provide brief
241                            timing characteritics for SDRAM/DDR/DDR2 memory
242                           Add memory size computation for Rambus memory
243                           Various output cleanups and fixes
244  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
245  Program Detect and skip false positives
246  Program i2cdetect: Add a mode to print adapter functionalities
247  Program i2cdump: Restore bank after bank switching
248                   Add new mode W (read word on even register addresses)
249  Program mkpatch: Fix typo breaking f71805f
250                   Turn warnings on (-w), and fix them
251                   Print a usage message on missing command line parameters
252  Program pwmconfig: Use mktemp instead of tempfile
253  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
254                   Add smsc47m192 support
255                   Add abituguru support (Hans de Goede)
256                   Fix memory leak when printing an unknown chip
257                   Add it8716 and it8718 support
258                   Make each it87 fan and fan div optional
259                   Print missing w83791d values
260                   Add w83793 support (Yuan Mu)
261                   The adt7463 may not have in4 (#2119)
262                   Hide more vt1211 missing input errors
263                   Clearer error messages when no sensors found
264  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
265                          Add ATI IXP200/300/400 SMBus detection
266                          Prevent warning on 64-bit PCI addresses
267                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
268                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
269                           F75384S/M, F75387SG/RG and F81218D detection
270                          Add Winbond W83793R/G and W83627DHG detection
271                          Handle the W83791D driver difference between kernels
272                          Add nForce4 MCP04, MCP51 and MCP55 detection
273                          Add AMD Geode devices detection
274                          Add ITE IT8716F and IT8718F detection
275                          Add NatSemi/Winbond PC87427 detection
276                          Get driver information for busy addresses from
277                           sysfs (2.6 only)
278                          Drop the ISA IT87xxF detection
279                          Check i2c adapter functionalities before probing
280                          Add Intel ICH8 SMBus detection
281                          Add AMD K8 thermal sensors detection
282                          Simplify detection of SiS5595, VIA686 and VT8231
283                          Add Analog Devices ADM1033, ADM1034, ADT7462,
284                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
285                          Check for root user at startup
286                          Attempt to be slightly more user-friendly
287                          Add VT8237A and VT8251
288                          Remove detection of nVidia graphics adapters
289                          Use sysfs for PCI device enumeration
290                          Add generic PCI SMBus adapter detection
291                          Add generic Super-I/O logical device detection
292                          Add SMSC LPC47M172/182 detection
2952.10.0 (20060214)
296  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
297  File doc/busses/i2c-viapro: Update (2.6 backport)
298  File doc/chips/via686a: Update (2.6 backport)
299  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
300  File etc/ Do not set vrm by default
301  File i2c-dev.h: Fix union i2c_smbus_data definition
302                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
303                  Add missing parentheses around macros
304                  Drop I2C_FUNC_SMBUS_EMUL
305                  Drop I2C_FUNC_SMBUS_*_PEC
306                  Drop I2C_SMBUS_*_PEC
307  File sensors_vid.h: Drop default VRM
308  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
309           This is intentional.  Use if you still
310           need your memory SPD data.
311  Library: Big update to use libsysfs.  More TODO though.
312           Fix bus matching code for Linux 2.6 (Karsten Petersen)
313           Add f71805f, w83687thf support
314           Add platform drivers support
315           Fix sysctl warnings on x86_64
316           Restore vt1211 temp1
317  Makefile: Compile user-space programs with -Wundef
318  Module i2c-i801: Simplify the hardware PEC code
319                   Always set PEC mode explicitly before each transaction
320  Module i2c-i810: Documentation update, PCI IDs cleanup
321  Module i2c-keywest: Remove bus probing code (2.6 backport)
322  Module i2c-nforce2: Remove dead code (2.6 backport)
323                      Add the ID of the nForce4 MCP-04 (2.6 backport)
324  Module i2c-via: Remove dead code
325  Module i2c-viapro: Remove dead code
326                     Support I2C block read (2.6 backport)
327                     Code cleanups (2.6 backport)
328                     Improve debug register dump (2.6 backport)
329  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
330          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
331          i2c-sis645: Use pci_driver name to request I/O region; do
332                      not initialize i2c_adapter name to "unset" (2.6
333                      backport)
334  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
335                                              (2.6 backport)
336  Module adm9240: Cleanups (2.6 backport)
337  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
338  Module it87: Minor cleanups
339               Fix fan3_div setting bug (Anton V. Staaf)
340  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
341               Separate the register read function
342               Add PEC support for the ADM1032
343  Module via686a: Cleanups
344  Module w83627hf: Drop useless initialization step (2.6 backport)
345                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
346                   Fix alarms (Yuan Mu)
347                   Preserve fan min on fan div change (Yuan Mu)
348                   Properly handle W83627THF without VID (Yuan Mu)
349                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
350                   Add W83687THF support
351  Module w83781d: Drop W83697HF support (Grant Coady)
352  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
353                  Fix fan control mode (PWM/DC) reporting
354                  Fix fan div auto-adjust (Yuan Mu)
355                  Fix the subclient handling
356  Module w83l785ts: Minor cleanup (2.6 backport)
357  Module vt1211: Restore temp1
358  Modules vt1211, vt8231: Change default VRM to 9.1
359  Program Add lookup tables for manufacturer names
360                           Fix rounding error in PCxxxx speed computation
361                           Improve text output
362                           Improve speed under Linux 2.6
363                           Verify checksum before decoding anything
364                           Improve manufacturing location decoding
365                           Improve memory type detection
366                           Improve part number decoding
367  Program i2cdump: Drop now useless #ifdef tests
368                   Fix capability check for continuous byte mode
369  Program i2cget: New
370  Program i2cset: Add PEC support
371                  Fix argc check
372  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
373                                       Print the correct bus type if bus
374                                       functionality can be queried
375  Program isadump: Display the real addresses in flat mode
376  Program Silently skip already existing nodes
377  Program mkpatch: Include f71805f
378  Program sensord: Do not log algorithm names
379                   Drop EEPROM support (Aurelien Jarno)
380                   Add W83627EHF, F71805F/FG support
381                   Fix PC87365/PC87366 alarms
382  Program sensors: Drop free_the_label
383                   Fix compilation with uclibc (no iconv)
384                   Add f71805f, w83687thf support
385  Program sensors-detect: Drop algorithm names
386                          Do not rely on i2cdetect -l printing algo names
387                          Simplify adapter name matching mechanism
388                          New address for ADM1032, ADT7461
389                          Improve ADT7467, ADT7468 support
390                          Fix MAX6659 reported driver
391                          Add Fintek F71805F detection
392                          Add Analog Devices ADT7476 detection
393                          Add Intel 82845G detection
394                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
395                          Fix udev detection in some corner case
396                          Improve DS1621 detection
397                          Always prefer ISA access over SMBus access
4002.9.2 (20050906)
401  File doc/chips/*: Big update (2.6 backport)
402  Library: Drop ds1780-specific code (now use adm9240)
403           Fix memory leak in sensors_get_label()
404           Support /sys/class/hwmon (Linux 2.6.14+)
405           Limit stack usage in sensors_read_proc_chips()
406  Makefile: Detect 2.6+ kernels and check targets
407  Man page isaset.8: Fix typos
408  Module adm1031: Fix broken kfree() calls
409  Module i2c-ali1563: New (2.6 backport by Winbond)
410  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
411  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
412          w83627hf.c: Tag find function __init
413  Module lm93: Fix memory leak
414  Module smsc47m1: Fix PWM enable polarity on read
415  Modules w83627hf, w83781d: Allow setting fan divisor to 128
416  Program Support Linux 2.6 (Burkart Lingner)
417                           Added DDR/DDR2 frequency reporting in convenient
418                           form of DDRxxx PCyyyy
419  Program i2cdump: Properly handle short i2c block reads
420  Program Fix compile errors
421  Program mkpatch: Include i2c-ali1563
422                   Include w83792d
423  Program pwmconfig: Fix unsafe temporary file use
424  Program rrd: Support 2.6 kernels
425  Program sensord: Add support for w83637hf
426                   Support pc87360 (Henrik Brix Andersen)
427  Program sensors: Support the VAIO "VGN" prefix for eeprom
428  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
429                          Advertise the w83792d driver
430                          Improve IT8705F and IT8712F detection
431                          Merge LM82 and LM83 detection
432                          Add W83687THF detection
4352.9.1 (20050412)
436  File doc/busses/i2c-nforce2: Update
437  File doc/chips/it87: Update
438  File doc/chips/lm90: Update for adt7461
439  File doc/chips/mic74: New
440  File etc/ New sections for lm92 and w83792d
441  Library: Add support for 2.6 fscpos driver (Stefan Ott)
442           Fix sis5595 in4 (Aurelien Jarno)
443           Add support for 2.6 gl520sm driver (Maarten Deprez)
444           Add support for 2.6 bmcsensors driver (Yani Ioannou)
445           Add support for w83792d (Chunhao Huang/Winbond)
446           Add support for 2.6 adt7461 (James Chapman)
447           Add support for 2.6 lm92
448           Add support for 2.6 vt1211
449           Add preliminary support for 2.6 w83627ehf
450  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
451            Use -fno-strict-aliasing on all architectures
452  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
453  Module bmcsensors: Fix compile error
454                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
455  Module ds1621: Fix detection (Aurelien Jarno)
456  Module eeprom: Discard SPD-centric checksum module parameter
457                 Cleanup detection function (backport from Linux 2.6)
458  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
459  Module i2c-i801: Temporarily disable broken I2C block read
460  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
461                   Gelato)
462  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
463  Module i2c-viapro: Prevent repeated resets
464  Module it87: Improve Super-I/O detection
465               Limit I2C address range
466               Support VID on the IT8712F
467  Module lm75: Only initialize CMP/INT bit
468  Module lm78: Fix bug with setting negative temperature limits
469  Module lm85: Properly differentiate between ADM1027 and ADT7463
470               Add EMC6D102 support
471  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
472               Add limited ADT7461 support
473  Module lm93: Fix IN10 (+5V) scaling
474  Module mic74: New
475  Module w83627hf: Support secondary Super-I/O address
476                   Enable temp2 and temp3 if they are disabled
477  Module w83781d: Revert AS99127F temp2 and temp3 computation change
478                  Skip final initialization step for AS99127F chips
479  Module w83792d: New (Chunhao Huang/Winbond)
480  Program ddcmon: New; user-space replacement for the ddcmon driver
481  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
482  Program isadump: Handle Super-I/O keys
483  Program lm_sensors.init: Cleanups (Axel Thimm)
484  Program Add basic command-line interface
485  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
486  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
487                     Don't complain about read-only enable files (lm85)
488                     Fix handling of alternate config file name
489  Program sensord: Fix erroneous error message (Aurelien Jarno)
490                   Support sis5595 in4 (Aurelien Jarno)
491                   Support w83627thf
492                   Support the separate it8712 prefix (Aurelien Jarno)
493  Program sensors: Display sis5595 in4 (Aurelien Jarno)
494                   No errors on missing pc87360 fans
495                   Add gl520sm support (Maarten Deprez)
496                   Improve vt1211 error/ignore handling (Michael Carland)
497                   Support w83792d, w83627ehf
498  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
499                          Improve IT8705F and IT8712F detection
500                          Improve udev detection
501                          Fix DS1621 detection
502                          Add W83627EHF detection
503                          Add ATI SMBus detection
504                          Add VT1211 alias detection
505                          Warn if chip modules not found
506                          Add i2c-ipmi to list if bmcsensors is on it
507                          Add PC87591 detection
508                          Search for correct udev db file name
509                          Add nForce3 250Gb and nForce4 detection
5122.9.0 (20041228)
513  NOTE: Requires i2c-2.9.0 or newer!
514  File README.thinkpad: Update
515  File doc/chips/it87: Cleanups
516  File doc/chips/lm63: New
517  File etc/ Set via686a voltage limits
518  File kernel/chips/ Resync module list with mkpatch
519  File kernel/include/sensors_compat.h: Define __devexit_p if missing
520                                        (kernels 2.4.16 and older)
521  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
522                             and dec_use removed in release 2.8.0
523  Modules (all chip drivers): Remove owner from i2c_driver; pass
524                              controlling_mod to i2c_register_entry() again
525  Module bmcsensors: Support function 1/x
526  Module i2c-amd756: Display the real bus name
527  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
528  Module i2c-i801: Support i2c block read (ICH5 and higher)
529                   Add PEC support for ICH6
530                   Add support for ICH7
531  Module i2c-ipmb: Remove from build since it doesn't work
532  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
533  Module icspll: Fix compilation
534  Module lm63: New driver for the National Semiconductor LM63
535  Module lm83: Use signed types for temperatures
536               Check limits on register writes
537  Module lm87: Round voltages properly
538               Retry on read errors (David Knierim)
539               Less agressive init (no reset)
540  Module lm90: Use signed types for temperatures
541               Check limits on register writes
542  Module lm93: Added module parameter for VID pin input thresholds.
543               Fix typo in dynamic VID alarms
544               Adds a couple log messages for failed transactions (David
545               Knierim)
546               Fix compilation breaking C99-ism (Axel Thimm)
547               Fix block read retries
548  Module pc87360: Support secondary Super-I/O address
549  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
550  Library: Add lm63 support
551           Add lpc47b397 support
552  Programs *.init: Rename lockfile to match file name
553  Programs i2cset, isaset: Written byte/word can be masked
554  Program Find eeproms on non-0 i2c bus too
555  Program mkpatch: Include i2c-amd756-s4882
556  Program pwmconfig: Handle new (well, back to old) pwm files names for
557                     Linux 2.6.10 and up
558  Program sensord: Do not scale load average (Aurelien Jarno)
559  Program sensors: Add lm63, lpc47b397 support
560                   Support DDR2 memory module EEPROMs (Rudolf Marek)
561                   Support only one location for the default configuration file
562                   Display the default configuration file location in --help
563                   Simplify the configuration file opening code
564  Program sensors-detect: Improve LM63 detection
565                          Discard IBM Thinkpad detection code
566                          Add PCA9556, LPC47B397, ICH7 detection
567                          Fix W83792D detection, add W83791SD detection
5702.8.8 (20041007)
571  File doc/donations: Update
572  File doc/lm_sensors-FAQ.texi: Add 4.6.1
573                                Update 4.7
574  File doc/chips/gl518sm: Update "iterate" info
575  File doc/chips/it87: Discard outdated module parameters
576  File doc/chips/lm75: LM77 is not supported
577  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
578  File doc/chips/lm93: New
579  File doc/chips/w83l785ts: Improvements
580  File etc/ Fix it87 lines order
581                            Update lm87 section
582  File kernel/include/sensors_vid.h: Support VRM 10.0
583  Library: Support 2.6 adm1025
584           Preliminary support for 2.6 lm87
585           Support 2.6 adm9240
586           Allow an alternative sysfs file name for chip features (2.6)
587           Fix lm83 critical limits (2.6)
588           Add lm93 support
589           Prevent some procfs errors from being silently ignored
590  Makefiles: Implement user_uninstall (Rudolf Marek)
591             Spoof LOGNAME and HOSTNAME when making html man pages
592  Module adm1025: Refine detection
593                  Update limit registers again (revert of 2.8.1)
594                  Init high limits if they read 0
595                  Fix conversions
596  Module lm75: Refine detection
597  Module lm78: Fix init
598  Module lm83: Default to kind lm83 if forced.
599               Fix temperature macros.
600  Module lm90: Add LM86, MAX6657 and MAX6658 support
601  Module lm93: New
602  Module mtp008: Fix the setting of limits on temp2
603  Module pca9540: Refine detection
604  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
605                  Support VID
606                  Fix fan_div file when fan count is less than 3
607                  Additional init and debug
608  Module smsc47m1: Fix pwm_enable being inverted
609  Module w83627hf: Add alternate VCORE/in0 calculation method
610                   Remove reset of chip by driver on initialization
611  Module w83781d: Fix default VRM for w83791d
612  Module w83l785ts: Implement read error handling (backport from 2.6)
613  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
614                    Wait for user input to continue (as opposed to 5 sec
615                    delay), can be skipped with -y
616                    Various cleanups and code refactoring
617                    Update manual pages
618  Program fancontrol.init: New (Dean Takemori)
619  Program Restore fans on many kinds of errors/interrupts
620  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
621                           (Giuseppe Della Bianca)
622  Program Detect devfs and refuse to run
623                    Use mknod's mode instead of chmod
624  Program mkpatch: Include xeontemp and pc87360
625  Program sensors: Rework adm1025 support
626                   Display pc87365/pc87366 VID
627                   Improve smsc47m1 support
628                   Hide 2.6 adm1027 alarm_mask being missing
629                   Print VRM version for all supported chips
630  Program sensors-detect: Support LM93, LM77, LM63
631                          Support PC8739x Super-I/O family (no sensors)
632                          Fix PCA9540 support
633                          Refine ADM1025/ADM1025A detection
634                          Refine LM75 detection
635                          Ignore missing /proc/modules (Andras Bali)
636                          Script-wide Perl cleanups
637                          Support udev
638                          Support W83792D, LM96000
6412.8.7 (20040611)
642  File README.thinkpad: Update 24RF08 status
643  File doc/fan-divisors: More info on accuracy
644  File doc/lm_sensors-FAQ.texi: Update 4.27
645  File doc/chips/adm1031: New
646  File doc/chips/max1619: New
647  File doc/chips/pc87360-fan: Renamed to pc87360
648  File doc/chips/pc87360: Big update
649  File doc/chips/w83781d: Update AS99127F documentation
650  File etc/ Add comments about BP6 voltages
651                            Add comment on Asus A7V8X-X VCore
652                            Misc fixes to lm80 section
653                            Update via686a section
654                            New lm99 section
655                            Add section for LM85-like chips
656                            Preliminary pc87366 section
657                            Add comment on GL520SM application modes
658                            Document beep_enable (Aurelien Jarno)
659                            Preliminary max1619 section
660                            Preliminary adm1030 and adm1031 sections
661  Library: Fix 2.6 VRM
662           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
663           Fully support the PC87360 family
664           Support the lm99
665           Add version and date strings
666           Support 2.6 max1619
667  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
668  Man page i2cdetect.8: document new command line flags
669  Man page i2cdump.8: More details on how i2cdump can write to a chip
670  Modules (all chip drivers): Rework memory allocation scheme.
671  Module adm1031: New (Alexandre d'Alton)
672  Module bmcsensors: Fix oops by creating thread for initialization
673  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
674  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
675          asb100.c, lm92.c: Use swab16
676  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
677  Module gl520sm: Less agressive initialization process
678                  Fix temp1 limits being unsettable in application
679                  Ensure that temp2 and in4 are not used at the same time
680  Module i2c-i801: Support 6300ESB and ICH6
681  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
682  Module i2c-sis645: Add support for SiS655
683  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
684  Module lm90: Support LM99 and LM89
685  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
686               Get rid of useless i2c_probe call
687  Module max1619: New (Alexey Fisher)
688  Module p4b_smbus: Add support for mobile versions of the 82801
689                    (Axel Thimm)
690  Module pc87360-fan: Renamed to pc87360
691  Module pc87360: Also support PC87365 and PC87366
692                  Add write support
693                  Correctly set the chip name depending on the type
694                  Add voltage and temperature support
695                  Fix fan speed computation
696                  Retrieve fans configuration from Super-I/O space
697                  Export pwm_enable (read-only)
698                  Honor pwm invert bits
699                  Clear fan alarms after we read them
700                  Do not read fan data when monitoring is disabled
701                  Do not include SENSORS_INSMOD stuff
702                  New module parameter: init
703                  Fan clock dividers change automatically
704                  Add thermistor dupport
705  Module smsc47m1: Lock on reads and writes
706                   Various PWM fixes
707  Module thmc50: Fix address range
708  Module via686a: Fix voltage roundings
709                  Simplify temperature conversions
710  Module w83781d: Drop PWM support for as99127f
711                  Invert AS99127F beep bits in driver rather than user-space
712  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
713  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
714  Program New
715  Program i2cdetect: Adapt probing method to address
716                     Add -q and -r flags to force probing methods
717                     Allow probing range selection
718  Program isadump: Major improvements
719  Program isaset: New
720  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
721                   module
722                   Include i2c-nforce2
723  Program sensord: New --rrd-no-average parameter
724                   Syncronize time slots with rrd
725                   Fix W83781D temp3 alarm (Aurelien Jarno)
726                   Add ASB100 support (Andrew May)
727  Program sensors: Fully support the PC87360 family
728                   Fix lm80 temperature alarms
729                   Support the lm99
730                   Do not invert AS99127F beep bits anymore
731                   Fix W83781D temp3 alarm (Aurelien Jarno)
732                   Print library version string
733  Program sensors-detect: Rework Super I/O detection
734                          Support SiS655/SiS96x
735                          Support ADT7461 and ADT7467
736                          Better support for ADM1027, ADT7460 and ADT7463
737                          Explicitly support ADM1028
738                          Scan all logical devices of PC87365 and PC87366
739                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
740                          Detect eeproms with software write protect (not
741                          enabled by default)
742                          Support ALi 1563 (2.6 only)
743                          Drop LTC1710 support
744                          Use byte reads for probing on ranges 0x30-0x37 and
745                          0x50-0x5F
746                          Improve LM89 and LM99 support
747                          Support GeForce FX 5900 video cards
748                          Fix devfs misdetection (Aurelien Jarno)
749                          Detect 6300ESB, ICH6
750                          Fix double detection of ISA chips
751                          Support MAX1619
752                          Support PC87373 Super-I/O
753                          Fix unknown adapters appearing multiple times
754                          Refine MAX6650/MAX6651 detection
7572.8.6 (20040405)
758  File README.thinkpad: Update status
759  File doc/chips/pca9540: New
760  File doc/chips/pc87360-fan: New
761  File etc/ Update pcf8591 default configuration
762  Library: Switch to new sysfs naming standard
763           Fix gcc 3.3 warnings (Philipp Thomas)
764           Support 2.6 ds1621 and pcf8591
765           Change pcf8591 magnitudes
766           Support pc87360-fan
767  Makefile: Install shared library 755
768  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
769  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
770  Modules ds1621, pcf8591: Check for capabilities before using them
771                           (Aurelien Jarno)
772  Modules pcf8574, pcf8591: Cleanups
773  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
774  Module adm1021: Better detection and initialization
775  Module pca9540: New driver for the Philips PCA9540
776  Module pc87360-fan: New driver for the National Semiconductor PC87360,
777                      PC87363 and PC87364 Super I/O chips
778  Module smsc47m1: Support the LPC47B27x
779  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
780  Program i2cdetect: Skip special addresses by default
781  Program sensord: Prevent null pointer dereference (Tim Toohey)
782  Program sensors: Print the degree symbol in the terminal's current locale
783                   (Aurelien Jarno)
784                   Update pcf8591 print to support 2.6 driver
785                   Support pc87360-fan
786  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
787                          Improved SiS chips support
788                          Add a white list of IBM systems
789                          Drop support of undetectable adapters
790                          Fix smart battery detection
791                          Add smart battery charger and manager detection
792                          Rework adm1021 and clones detection
793                          The PC87360, PC87363 and PC87364 Super I/O chips
794                          now have a (preliminary) driver
795                          Rework Super I/O detection
796                          Better support of devfs
797  Program New
8002.8.5 (20040305)
801  File doc/chips/SUMMARY: Update
802  File etc/ Epox 8K3A tweaks. (Kronos)
803  Makefiles hotplug and rrd: Remove -o and -g arguments to install
804  Module bmcsensors: Increase max SDRs to 100
805  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
806  Module i2c-amd756: Don't register driver to avoid driver conflicts.
807                     (Daniel Rune Jensen)
808  Module it87: Better temperature sensor types handling (Takeru Komoriya)
809               Fix reset=1 (Takeru Komoriya)
810  Module lm80: Code cleanups
811  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
812  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
813  Module w83627hf: Add w83637hf support
814                   Fix exported name
815                   Fix PWM in w83627thf
816                   Preserve other bits when forcing temp2/3 to comparator mode
817  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
818                  Remove asb100 support
819  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
820          Define driver ID if i2c-id.h doesn't have it yet.
821  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
822          Backport oops fix from Linux 2.6.
823  Modules (all chips): Get rid of useless headers
824  Program Add sysfs support
825  Program sensors: Add w83637hf support
826                   Add support for Shuttle Ethernet EEPROMs
827                   Drop 2.6 subclient detection
828  Program sensors-detect: Add heuristics to the LM80 detection function
829                          Add support for W83L785R, improve W83L784R/AR
830                          Add GeForce FX 5600 as supported by rivatv
831                          More Super IO chips, better handling
832  Library: Update to match renames in fscher
833           Reverse temporary changes to w83l785ts mappings
834           Fix vt1211 and vt8231 uch_config not being writable
835           Add 2.6 lm80 support
836           Add w83637hf support
837           Remove in6 and temp1 from vt1211 and vt8231
838           Add support for Shuttle Ethernet EEPROMs
839           Remove unused as99127f features
8422.8.4 (20040207)
843  File doc/lm_sensors-FAQ.texi: Update 4.20.
844  File doc/chips/it87: Change hyst to low
845  File doc/chips/w83l785ts: New
846  File etc/ Change it87 hyst to low
847                            Fix w83697hf supposed to have temp3
848                            Limits initialization for adm1025/ne1619
849                            Handle fscher voltage conversions
850                            Add Tyan Trinity S2495 KT400 setup (Eric
851                              Schumann)
852                            Fix fscher fan labels (Reinhard Nissl)
853  Library: Better 2.6 eeprom support
854           Change it87 hyst to low
855           Add 2.6 gl518sm, fscher support
856           Fix 2.6 negative voltages handling
857           Temporary fix to w83l785ts mappings
858  Module adm1025: Separate prefix for NE1619
859  Module adm1026: Remove use of temporary ID
860                  Define addresses as a range
861  Module bmcsensors: Fix reservations
862  Module fscher: Externalize voltage conversions
863  Module eeprom: Remove memtype
864  Module i2c-piix4: Fix resource release error
865                    Various cleanups
866  Program Add sysfs support
867  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
868                   Drop linux 2.2 support
869                   Add w83627hf
870  Program sensors: Do not show algorithm by default
871                   Cleanup temperature unit display code
872                   Cleanup label spacing code
873                   Fix output to UTF-8 terms (Marcel Sebek)
874                   Simplify gl518sm print
875                   Do not ignore errors in FSC chips prints
876                   Fix w83l785ts print
877                   Cleanup FSC chips prints
878  Program sensors-detect: Fix PATH issues
879                          Correctly point to the fscher driver
8822.8.3 (20040115)
883  File lm_sensors.spec: Update
884  Library: Add 2.6 eeprom, lm90 support
885           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
886  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
887  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
888  Module i2c-amd756: Fix byte writes
889  Module i2c-tsunami: Cleanups (Daniel Nilsson)
890  Module it87: Fix sg_tlx writes; fix sensor type reporting;
891               add 8712 Super I/O detection;
892               remove initialization of temp_type and fan_ctl;
893               remove init and temp_type module parameters
894  Module lm90: Handle hysteresis differently
895  Module smartbatt: Fix detection, magnitudes, temp
896  Module w83781d: Fix negative voltages
897  Module w83l785ts: New
898  Program eeprog: Make 8 bit mode the default
899  Program fancontrol: Improvements, fixes, support 2.6 kernels
900  Program mkpatch: Add lm75.h
901  Program pwmconfig: Improvements, fixes, support 2.6 kernels
902  Program sensors: Add ASB100 support
903  Program sensors-detect: Add 8712 Super I/O detection;
904                          add W83L785TS detection
9072.8.2 (20031211)
908  IMPORTANT: Limit initialization removed from all chip drivers!
909             If you didn't run 'sensors -s' in the past you may need to now!
910  File Change lm75 scaling back to 1;
911                        Add example for asb100
912  Library: Fix bmcsensors scaling, increase number of sensors;
913           Add w83627thf support; Advance version to 3.0.0;
914           Add hermes, ADM1032, ASB100 support;
915           Add it87 sensor type support;
916           Add sysfs support for kernel 2.6;
917           Fix memory leaks
918  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
919             Fail if no kernel .config file exists;
920             Don't build module dependencies for user and user_install
921  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
922          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
923          smsc47m1, thmc50, via686a, w83627hf, w83781d:
924          Remove initialization of limits by driver.
925  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
926  Modules (chip): Init cleanups
927  Module asb100: New
928  Module bmcsensors: Fix voltage scaling, voltage and fan limits
929  Modules ddcmon, eeprom: Add failure printks
930  Module fscher: New (Fujitsu-Siemens Hermes driver)
931  Module i2c-amd756: Fix AMD8111 support
932  Module i2c-amd8111: Fix byte writes
933  Module i2c-nforce2: Fix byte writes
934  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
935  Module i2c-sis630: Sync with 2.6.0-X driver version
936  Module i2c-viapro: Add support for Via 8237
937  Module it87: Add pwm and "smart guardian" support;
938               add it87 sensor type support
939  Module lm75: Fix negative voltages
940  Module lm90: Add ADM1032 support
941  Module w83781d: Fix 791d and 627hf detection
942  Module w83627hf: Add VID support
943  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
944  Program eeprog: New
945  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
946                                       support sysfs for i2c bus search
947  Program i2cdetect: Add -l option to list busses
948  Program i2cdump: Add 'c' mode for consective address reads
949  Program mkpatch: Cleanups
950  Program pwmconfig: Handle multiple fans controlled by a single pwm
951  Program sensord: Remove ddcmon support
952  Program sensors: Add ADM1032 support; add messages for sysfs
953  Program sensors-detect: Prefer Super I/O drivers;
954                          Fix W83627HF and W83791D detection; detect CSB6;
955                          Detect ADM1029, ADM1030, ADM1031;
956                          Detect W83637HF, W83697UF;
957                          Add it87 sensor type support; add sysfs support
958                          Reduce lm80 misdetects; remove PCFxxxx "detection"
959                          Detect VT8237 (KT600)
960                          Use VPD instead of DMI+ACPI for Thinkpad detection
961                          Suggest new asb100 driver instead of w83781d
9642.8.1 (20031005)
965  NOTE: Requires i2c-2.8.1 or newer!
966  File Improved adm1025 section
967                        Default temp labels for as99127f
968                        Improved lm83 section
969                        Better support for Asus A7V8X-X
970  File doc/chips/SUMMARY: Add SMSC manufacturer ID
971  File doc/chips/adm1025: Add decent documentation (almost new)
972  File doc/chips/lm83: Known motherboards list update, misc updates
973  Library: Change adm1025 names (hyst/over become low/high)
974           Swap adm1025 temp1 and temp2 to match the driver's order
975           Advance version to 2.0.1
976           Update lm83 support
977           Add support for lm90, xeontemp, max6650
978           Add separate messages for read and write errors
979           Add missing message for parse error
981  Modules (various): Fix includes for compilation on Alpha
982                     Use the new i2c_delay function instead of the various
983                     do_pause functions
984  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
985  Module i2c-nforce2: Cleanups
986  Module i2c-i810: Use readl/writel for portable access to PCI memory
987  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
988  Module i2c-savage4: Use readl/writel for portable access to PCI memory
989  Module i2c-sis630: Fix detection
990                     Add block data read/write support
991  Module i2c-sis645: Detection method change/bugfix
992  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
993  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
994  Module adm1025: Major driver update
995                  Add support for Philips NE1619
996                  Simplify the driver a lot (unified voltages, unified
997                  temperatures and much more)
998                  Fix default voltage limits
999                  Change default temperature limits
1000                  Swap remote and local temperatures to match the internal
1001                  registers order (make the code unification possible)
1002                  Export remote diode fault through alarms
1003  Module ddcmon: Major update
1004                 Add half a dozen new features
1005                 Add checksum parameter (same as for the eeprom module)
1006                 Fix monitor limits
1007  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1008  Module lm78: Fix a fan_div/fan_min bug
1009  Module lm83: Add t_crit and alarms support
1010  Module lm90: New
1011  Module max6650: New
1012  Module saa1064: New
1013  Module smsc47m1: Add support for 47M142
1014  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1015                   enhance w83627thf support
1016  Module w83781d: Enhance chip detection; clean up error returns;
1017                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1018  Module xeontemp: New
1019  Program Add Direct Rambus (DRDRAM)
1020                           Mark Rambus as unsupported
1021  Program New
1022                          Interfaces between our eeprom module and
1023                          parse-edid from the read-edid project
1024  Program p4b_smbus: Fix SMP compilation
1025  Program sensord: Add support for IT87 (Mike Black)
1026                   Change ADM1025 support to match the changes made to
1027                   the library
1028  Program sensors: Rewrite and enhance EEPROM support
1029                   Change LM83 and ADM1025 support to match the changes
1030                   made to the library
1031                   Add DRDRAM support to print_eeprom
1032                   Exit(1) on /proc write failure (Malte Starostik)
1033                   Add LM90, MAX6650 support
1034  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1035                          Add support for LM82, LM86, LM89
1036                          Improved W83781D family detection
1037                          Add support for AS19927F rev.2, ASB100 Bach
1038                          Add support for Asus Mozart-2 (3 types)
1039                          Add support for NE1619
1040                          Add support for FSC Hermes
1041                          Make sure /sbin is in the user's path
1042                          Fix EEPROM detection
1043                          Automatic module.conf and /dev/i2c* detection
1044                          Improve LM82 and LM83 detection
1045                          Handle "to-be-written" cleanly
1046                          Add detection for 47M14x Super I/O
1047                          Handle the one-address-many-chips-same-driver
1048                          case
10512.8.0 (20030714)
1052  NOTE: Requires i2c-2.8.0 or newer!!!
1053  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1054                  2.4.13 or later required for mkpatch.
1055  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1056                  i2c package
1057  File doc/chips/fscscy: Add watchdog documentation
1058  File Fix vt1211/vt8231 thermistor calculations
1059  File sensors.h: Now automatically generated
1060  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1061           add adm1026, lm83, lm85, w83791d support;
1062           Advance version to 2.0.0
1063  Makefiles: Generate warnings if new library won't be found by;
1064             Modules now install in kernel/drivers/i2c/[busses,chips];
1065             Ensure that headers in /usr/local/include are used first;
1066             Don't use /usr/include headers for modules;
1067             Handle multiple UTS_RELEASE definitions in linux/version.h;
1068             Automatically generate kernel/include/sensors.h;
1069             Remove old gzipped modules; remove old misc directory if empty;
1070             Remove pre-2.4 installation method;
1071             -Wall now the default;
1072             Add new targets user, user_install, and help;
1073             Run depmod after module installation
1074  Modules (all): Cleanups including
1075                - Add #include <i2c-proc.h>
1076                - C99 initializers
1077                - Remove #ifdef MODULE
1078                - Remove #ifndef THIS_MODULE
1079                - Remove #ifndef MODULE_LICENSE
1080                - Remove other 2.1/2.2 #ifdefs
1081                - Remove #include "sensors.h", copy SYSCTL defs to module
1082                - Remove excess #includes
1083                - Remove argument in i2c_register_entry()
1084                - Remove dummy xxx_command() definition
1085                - Remove EXPORT_NO_SYMBOLS
1086                - Remove init_MUTEX #define
1087                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1088                  no longer adjust their own refcounts
1089                - Use module_init() and module_exit()
1090                - Update to new i2c_driver struct definition
1091  Modules (bus PCI): Convert to PCI-module-style initialization
1092  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1093  Module adm1021: Set alarm on failed reads and report old value;
1094                  merge changes from kernel 2.5.54
1095  Module adm1026: New
1096  Module bmcsensors: Fix compile when DEBUG=1
1097  Modules ddcmon, eeprom: Use i2c block reads if possible;
1098                          better error handling
1099  Module ds1307: Add to Makefile
1100  Module gl520sm: Fix temperature over/hyst writes
1101  Module lm75: merge changes from kernel 2.5.54
1102  Module lm83: New
1103  Module lm85: New
1104  Module i2c-ali1535: Check for invalid transaction
1105  Module i2c-ali15x3: Check for invalid transaction
1106  Module i2c-amd756: merge changes from kernel 2.5.54;
1107                     check for invalid transaction
1108  Module i2c-amd8111: merge changes from kernel 2.5.54
1109  Module i2c-i801: Add support for 82801EB (ICH5)
1110  Module i2c-i810: Fix for some chips
1111  Module i2c-nforce2: New
1112  Module i2c-piix4: Check for invalid transaction
1113  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1114  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1115        north bridges; SiS962 and SiS963 south bridges
1116  Module i2c-viapro: Check for invalid transaction
1117  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1118          pwm and pwm enable support; update docs
1119  Module smbus-arp: Check adapter for HW or SW PEC support;
1120                    add reset option
1121  Module w83781d: Add support for w83791d
1122  Module w83627hf: New
1123  Program Recognize DDR and Rambus
1124  Program eeprom: Fix writes for small eeproms
1125  Program eeprom, eepromer: Use local i2c-dev.h for build
1126  Program fancontrol: New
1127  Program lm_sensors.init: Call sensors -s in start()
1128  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1129                   Add adm1026,lm85 support;
1130                   Remove sensors.c file; add sensors_compat.h;
1131                   Remove patches to i2c-core.c and drivers/char/mem.c;
1132                   Now works only for kernels 2.4.13 or later
1133  Program p4b_smbus: Fix 'make install';
1134                     Install in same place as other modules;
1135                     Clear correct bits in config word
1136  Program pwmconfig: New
1137  Program sensors: add adm1026, lm85, w83791d support
1138  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1139                          w83627hf, w83627thf, w83697hf);
1140                          Add support for SiS651, SiS961, SiS745, SiS746;
1141                          Support dmidecode 2.0 and later;
1142                          Fix "C" format error;
1143                          Add support for adm1026, 82801EB (ICH5), W83791D;
1144                          Add support for w83l785ts, nForce2;
1145                          Fix UTF-8 incompatibility;
1146                          Better support for lm75;
1147                          Add support for lm83
11492.7.0 (20021208)
1150  NOTE: Requires i2c-2.7.0 or newer.
1151  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1152  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1153  File doc/busses/i2c-sis645: Add license
1154  File doc/chips/lm92: Add license, features
1155  File doc/chips/maxilife: Add license, parameters, features
1156  File doc/chips/smartbatt: Complete rewrite
1157  File doc/chips/vt8231: Add license, parameters
1158  File Add section for lm75; complete the lm78 section
1159  Library: Add support for MC1066; add multiple VRM version support for lm87;
1160           enhance adm1023 support; initial support for Sony Vaio eeprom;
1161           add support for bmcsensors; add hacks for additional dummy drivers
1162  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1163            add flags for x86_64 compiles
1164  Module adm1021: Add support for MC1066
1165  Module bmcsensors: New
1166  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1167                   kernel 2.5.43; fix 2.2 kernel compiles
1168  Module gl518sm: Iterate allowed only for rev 0x00
1169  Module i2c-amd756: Configure base address for nForce support;
1170                     check for uninitialized base address;
1171                     add support for amd8111 (SMBus 1.0)
1172  Module i2c-amd8111: New (SMBus 2.0)
1173  Module i2c-ipmb: New
1174  Module i2c-ipmi: New
1175  Module i2c-keywest: Sync with kernel 2.4.20
1176  Module i2c-sis630: Add support for SiS730
1177  Module i2c-sis645: Improve support for SiS645/961;
1178                     add support for SiS645DX/961 and SiS735;
1179                     fix 2.2 kernel compiles
1180  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1181  Module lm87: Add multiple VRM version support
1182  Module vt1211: Fix inx limits and alarms; fix in0
1183  Module vt8231: Fix inx limits and alarms; fix in0
1184  Module w83781d: Fix in0/in1 initialization
1185  Module smartbatt: New
1186  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1187  Program Code cleanup; valid HTML; better HTML output;
1188                           stop decoding on checksum error
1189  Program dmidecode: Fix read bug; upgrade to version 1.8
1190  Program doc-insmod: Complete rewrite; fix author output
1191  Program doc-features: Complete rewrite; handle missing sysctl entries;
1192                        handle unknown prefix with suggestion
1193  Program lm_sensors.init: Remove spaces bug; add green/red output
1194  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1195  Program rrd: Add sanity limits to newly-created RRD.
1196  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1197  Program sensors: Add support for MC1066, Rambus Rimms;
1198                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1199                   initial support for Sony Vaio eeprom
1200  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1201                          IPMI, AMD8111; add help if no sensors found;
1202                          add ACPI method for IBM system detection;
1203                          work with old Perl versions again;
1204                          initial support for Sony Vaio eeprom
12062.6.5 (20020915)
1207  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1208  File Fix temp[23] for as99127f; add vt8231
1209  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1210  Module dmi_scan: new
1211  Module ds1621: Fix enable/disable
1212  Module eeprom: Do not corrupt 24RF08's when checksum=1
1213  Module i2c-i801: Check for uninitialized base address;
1214                   enable if not enabled
1215  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1216  Module i2c-sis630: new
1217  Module i2c-sis645: new
1218  Module lm92: Fix in-kernel initialization
1219  Module via686a: Remove VT8231 support
1220  Module vt8231: new
1221  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1222  Program dmidecode: new
1223  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1224  Program mkpatch: Add entries for, lm92,
1225                   pcf8574, pcf8591, smsc47m1, vt1211;
1226                   add dmi_scan
1227  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1228  Program lm_sensors.init: fix stop()
1229  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1230                   add support for logging loadavg in RRD;
1231                   fix down-converting raw labels for RRD;
1232                   update chip support, still behind sensors
1233  Program sensors: Add /usr/local/etc to config file path;
1234                   fix -c and -u flags; add vt8231
1235  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1236                          refuse to run on IBM systems;
1237                          fix sysconfig module numbering;
1238                          change quick write to not corrupt 24RF08's
12402.6.4 (20020719)
1241  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1242  File doc/vid: New
1243  File include/sensors_vid.h: New
1244  File Add vt1211, smsc47m1
1245  Library: Add multiple VRM version support for adm1025, w83781d;
1246           fix 'flex scanner jammed' on some systems;
1247           add vt1211, smsc47m1, lm92;
1248           fix access mode checking
1249  Makefiles: For 2.4+ kernels, modules now install in
1250             kernel/drivers/[i2c,sensors] , not misc/ , and
1251             'make install' removes old versions in misc/ .
1252             Use $CFLAGS and $CPPFLAGS if defined.
1253  Module adm1025: Add multiple VID version support
1254  Module ds1307: new
1255  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1256                     reliability improvements
1257  Module i2c-hydra: Flush posted writes
1258  Module i2c-i801: Add support for 82801DB (ICH4)
1259  Module i2c-i810: Flush posted writes
1260  Module i2c-savage4: new
1261  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1262  Module i2c-voodoo3: Flush posted writes
1263  Module ds1307: New
1264  Module lm92: New
1265  Module smbus-arp: new
1266  Module smsc47m1: new
1267  Module via686a: Add support for VT8231 sensors
1268  Module vt1211: new
1269  Module w83781d: Add multiple VID version support; fix temp alarms
1270  Program eeprom: new
1271  Program i2cdump: Add smbus block command specification, add PEC support
1272  Program lm_sensors.init: new
1273  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1274                   pcf8574, pcf8591, smsc47m1, vt1211
1275  Program p4b_smbus: Add support for ICH4
1276  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1277  Program sensord.init: Renamed, was prog/init/sensors
1278  Program sensord: Major update, now requires rrd source;
1279                   not compiled by default
1280  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1281                   (don't display algo. and adap.) option;
1282                   add vt1211, smsc47m1, lm92
1283  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1284                          add 82801DB, LM85; fix perl warnings;
1285                          generate /etc/sysconfig/lm_sensors for
1286                          lm_sensors.init script
12882.6.3 (20020322)
1289  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1290  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1291  File doc/chips/it87: add more temp_type help
1292  File Un-ignore it87 in8, temp3, fan3;
1293                        add adm1021 section; add lm87 AIN[1,2] template;
1294                        swap negative voltage limits for 782d,783s,627hf,
1295                        697hf,it87; add more it87 help; swap neg. voltage
1296                        limits for lm78(-j), lm79, w83781d, as99127f
1297  Library: Add PCF8591, W83697HF, ADM1023 support;
1298           fix w83* fan_min computes;
1299           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1300  Module adm1024: Add MODULE_LICENSE("GPL")
1301  Module bt869: Add s-video out and DVD resolution support
1302  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1303  Module fscscy: implement min/max for voltages and fans
1304  Module i2c-amd756: Add support for AMD768
1305  Module i2c-i810: Add support for 810E
1306  Module i2c-keywest: Big update, sync with kernel 2.4.18
1307  Module i2c-piix4: Check for uninitialized base address
1308  Module i2c-sis5595: Blacklist 645, 735
1309  Module i2c-viapro: Check for uninitialized base address
1310  Module gl518sm: Standardize /proc entries in0-3
1311  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1312               fan -> fan1; fix temp2 limit writes
1313  Module pcf8574: Add support for PCF8574A; /proc interface changed
1314  Module pcf8591: new
1315  Module sis5595: Blacklist 645, 735
1316  Module w83781d: Add W83697HF support; allow force_subclients parameter
1317                  for Tyan 2460
1318  Programs, Update for new /proc names
1319  Program new
1320  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1321                   add text output
1322  Program init/sensors: New SysV init script
1323  Program Add support for fscscy, add more help entries
1324  Program p4b_smbus: new
1325  Program rrd: Install summ_week.cgi
1326  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1327                   clean up chassis intrusion prints
1328  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1329                          fix Via686a and it87 detection;
1330                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1331                          fix uninitialized values; it87 beats lm78
13332.6.2 (20011118)
1334  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1335  Chip Modules (all): malloc.h -> slab.h
1336  Modules (all): Add MODULE_LICENSE("GPL")
1337  File doc/FAQ: More updates and additions
1338  File Fix it87 in5,in6 (-12,-5) calculations
1339  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1340           update it87 alarm ID's.
1341  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1342  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1343  Module i2c-amd756: Improve busy handling/printk's
1344  Module i2c-i801: Add 82801CA/CAM support
1345  Module i2c-keywest: Sync with PPC people, it works now
1346  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1347  Module i2c-viapro: Add Via VT8233 support
1348  Module it87: Merge alarm_* /proc entries to alarms
1349  Module sis5595: Fix support for rev B0
1350  Module via686a: Make limit initializations reliable
1351  Module w83781d: Allow init=0 parameter to bypass initialization
1352  Program isadump: Add flat address space (PCI) support
1353  Program Add support for i2c-ali1535, adm1024, ds1621,
1354                      fscpos, it87, maxilife, mtp008
1355  Program sensors: Fix w83781d temp precision
1356  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1357                          Fujitsu Poseidon and Scylla,
1358                          Intel 82443MX and 82801CA/CAM detection,
1359                          add ITE 8172G detection (driver in kernel 2.4.10)
13612.6.1 (20010830)
1362  File BUGS: Updated
1363  File doc/FAQ: More updates and additions
1364  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1365  File Fix/enhance it87 section
1366  Library: ds1621 and it87 updates
1367  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1368  Module i2c-amd756: Add AMD 766 support
1369  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1370  Module i2c-piix4: Add Serverworks CSB5 support
1371  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1372  Module adm1025: Fixed temp2 min/max writes
1373  Module ds1621: Add 12-bit precision mode
1374  Module it87: Enable all alarms, add in8 support, add sensor type selection
1375  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1376                  remove support for module
1377  Module sis5595: Recognize unsupported chips and refuse to load
1378  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1379  Program eepromer: new
1380  Program Fix dependencies on i2c-proc; disallow compilation
1381                      of sensors.c as a module in kernel
1382  Program sensors: it87 updates; adjust temp. precision for some chips
1383  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1384                          recognize unsupported SiS chips;
1385                          recognize AMD 766 and Serverworks CSB5.
13872.6.0 (20010612)
1388  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1389        If your make fails because it can't find <linux/i2c-proc.h>, you
1390        forgot this step!!!
1391  File doc/FAQ: Many, many updates and additions
1392  File doc/busses/i2c-sis5595: new
1393  File doc/busses/i2c-tsunami: new
1394  File doc/chips/it87: new
1395  File doc/chips/via686a: Claim support for 686b.
1396  File README.thinkpad: new
1397  File Adjust as99127f in5 (-12V) and temp2 calculations;
1398                        Add lm87, adm9240, ds1780, lm81 templates;
1399                        Enhance help comments in file;
1400                        Add Tyan S2510 dual-MTP008 example;
1401                        Make separate sis5595 section.
1402  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1403  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1404  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1405           Add support for maxilife-nba and amd1024;
1406           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1407  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1408  Chip Modules (all): Change from sensors_* to i2c_* globals
1409                      for new i2c-proc.[ch]
1410  Makefiles: enhance to support Alpha architecture
1411  Module adm1021: Fix lm84 and gl523sm support
1412  Module adm1024: new
1413  Module i2c-i801: Chip detection cleanup
1414  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1415  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1416  Module i2c-tsunami: New
1417  Module i2c-via: Ensure i2c bus is tristated correctly.
1418  Module it87: new driver for IT8705, IT8712, Sis950 chips
1419  Module lm78: Recognize chipid=0x20
1420  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1421  Module mtp008: Fix temp initializations;
1422                 Save BIOS pin configuration of temps and fans;
1423                 Fix sensor type reads/writes and fan min writes;
1424                 Fix spurious invalid sensor type messages
1425  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1426                  used for patched kernel now.
1427                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1428  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1429                  Allow force_addr=0xaddr
1430  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1431  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1432                  reading changes; Add messages for subclient
1433                  registration failure
1434  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1435  Program i2cset: new
1436  Program isadump: fix for Alpha arch. compiles
1437  Program Fix adm9240 typos; Add more chips to;
1438                      Remove ltc1710; Fix i2c_sis5595 typo;
1439                      Support kernel 2.4.5 makefile change;
1440                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1441  Program sens_update_rrd: new
1442  Program sensord: Add -d (debug) and -p (pid-file) options
1443  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1444                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1445                   Change mtp008 temps from max/min to limit/hyst;
1446                   Add maxilife-nba, adm1024, it87 support.
1447  Program sensors-detect: Recognize lm78 with chipid=0x20;
1448                          Recognize SMSC Victory66 South Bridge;
1449                          Add devfs /dev/i2c/x support;
1450                          Add adm1024, it87xx support; Add thinkpad warning.
1451  Program tellerstats: new
14532.5.5 (20010115)
1454  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1455        you have kernel 2.4.0-prerelease or greater.
1456  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1457  File doc/developers/proc: new
1458  File Add mtp008 entries, adm1025 entries
1459  Library: Add ds1621, mtp008 support
1460  Module adm1021: Add support for adm1021a / adm1023
1461  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1462  Module adm1025: Add support for remote temp; rename /proc entries to
1463                  in[0-5] and temp[1-2]; fix negative temp readings
1464  Module adm9240: Rename /proc entries to in[0-5]
1465  Module ddcmon: allow force and force_ddcmon parameters
1466  Module ds1621: new
1467  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1468  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1469  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1470  Module lm87: cleanup, update voltage calculations
1471  Module mtp008: new
1472  Module pcf8574: change update time to 5 seconds
1473  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1474  Module w83781d: fix beep setting via /proc
1475  Programs editticket, readticket: new
1476  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1477  Program more fixes; now adds many more modules
1478  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1479                   add adm1025 temp2; report temp limits correctly as
1480                   min/max or limit/hysteresis; print message if no
1481                   sensors are found. Removed false errors from lm87 reads.
1482  Program sensors-detect: Add ds1621, mtp008 detection;
1483                          add ServerWorks detection
14852.5.4 (20001012)
1486  Module i2c-viapro: Add support for Via 596B (0x3051)
1487  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1488  Program fixed infinite loop
1489  Program sensors-detect: Detect Via 596B (0x3051)
14912.5.3 (20001008)
1492  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1493  File useful_addresses.html: update
1494  Library: Add lm87 support
1495  Module pcf8574: new
1496  Module i2c-ali1535: new
1497  Module i2c-ali15x3: removed force #ifdef.
1498  Module i2c-i801: support Intel 82801BA (815E chipset)
1499  Module i2c-i801: add i2c block write support, fix smbus block bugs
1500                   (requires i2c 2.5.3 package)
1501  Module i2c-i810: support Intel 82815
1502  Module lm87: new
1503  Module sensors: Fix for kernel 2.4.0-test8
1504                  (remove copy_to_user_ret and put_user_ret)
1505  Module w83781d: limit fan divisors to 8 max. for as99127f
1506  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1507  Program i2cdump: Add smbus block read support
1508  Programs i2cdetect, i2cdump: Improve error reporting
1509  Program sensors: new switch -u (--unknown)
1510  Program sensors-detect: detect Intel 82801BA (815E chipset)
1511  Program sensors-detect: detect Intel 82815
1512  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1513  Program sensors-detect: detect National LM87
1514  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1515  Program sensors-detect: Improve error reporting
15172.5.2 (20000709)
1518  File Fix lm80 in8 calculation
1519  Module w83781d: W83783S no longer crashes on unloading
1520  Program sensors-detect: more robustness in case of unknown i2c adapters
1521  Program sensors-detect, libsensors: fix eeprom size reporting
1522  Program sensord: more flexibility, support for alarm scanning etc.
1523  Program sensors: support for ignore setting on sensor alarms.
1524  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
15262.5.1 (20000618)
1527  Library: Add adm1025 support
1528  Module adm1025: new
1529  Module ddcmon: Fixed bus scan which could hang SMBus
1530  Module i2c-keywest: new
1531  Module maxilife: Add support for Maxilife '99 (NBA)
1532  Module via686a: Enable sensors if not enabled by BIOS
1533  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1534  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1535  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1536  Module w83781d: Fis as99127f fan speed (was 66% too high)
1537  Module w83781d: Improve beep input checking
1538  Program i2cdump: Add Winbond-style bank selection
1539  Program isadump: Add Winbond-style bank selection
1540  Program sensors: Add adm1025 support.
1541  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1542  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1543  File Add Maxilife '99 entries
1544  File Remove some as99127f entries.
1545    Note: For as99127f, reinstall manually (make install
1546          won't reinstall it) or else 'sensors -s' will fail.
15482.5.0 (20000312)
1549  Dropped all kernel 2.0 and 2.1 compatibility
1550  Module i2c-i810: new
1551  Module ddcmon: new
1552  Module via686a: new
1553  Module i2c-amd756: fixed region request
1554  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1555  Module w83781d: Don't change pin settings at initialization;
1556                  also fix chip detection.
1557  Library: Support for ddcmon and via686a
1558  Program sensors-detect: Support for ddcmon and via686a
1559  Program sensors: Support for eeprom, ddcmon and via686a
15612.4.5 (20000116)
1562  Introduced DESTDIR installation prefix
1563  Module lm80: fixes, temperature now read and set correctly
1564  Module i2c-voodoo3: driver enhancements
1565  Module w83781d: fixes, AS99127 works much better now
1566  Library: New ignore keyword in config file
1567  Programs: Support for new ignore keyword
1568  Program sensors-detect: Support for MGA detections
15702.4.4 (19991201)
1571  Addition of the alpha release of AMD 756 SMBus host support.
1572  Many fixes and updates to the gl518sm driver
1573  Updates and fixes for device detection
15752.4.0 (19990920)
1576  Too much to list.
1577  i2c and smbus parts are split off to a separate i2c package.
1578  New drivers and other stuff.
15802.3.4 (19990616)
1581  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1582  All: Now compiles against kernel 2.0.x (again ;)
1583  Module gl518sm: some updates and refinements
15852.3.3 (19990603)
1586  All: Now compiles against kernel 2.3.x (x >= 1)
1587  Module i2c-voodoo3: Timing issue fixes
1588  Module bt869: Seems to be functional and relatively well tested
1589  Many modules were modified to be more compatible with the new
1590   Mutex structure in the new experimental kernels.
15922.3.2 (19990507)
1593  Module i2c-hydra: Now compiles on 2.0.x kernels
1594  Module i2c-lm75: Slightly better detection
1595  * New, but not compiled by default:
1596  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1597  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
15992.3.1 (19990501)
1600  All: Now compiles on PPC
1601  Module i2c-hydra: NEW
1602  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1603  Module w83781d: Removed deadlock (mutex was not initialized)
1604  Documentation: A few glitches removed
1605  Makefile: default module installation directory is now
1606            /lib/modules/current/extra/misc
1607  Program sensors-detect: PPC Hydra now detected
1608  Program sensors: Now prints complete GL518SM information
1609  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
16112.3.0 (19990422)
1612  All: Many, many changes and improvements
1613  All: Many small bugs and problems removed
1614  Modules: New insmod parameters
1615  Modules: Much improved chip detection
1616  Module maxilife: NEW
1617  Module adm1021: MAX1617A now also supported
1618  Module adm9240: DS1780 now also supported
1619  Module w83781d: W83782D and W83783S now also supported
1620  Program sensors-detect: NEW
1621  Library: All chips now supported
1622  Documentation: Very much improved
16242.2.2 (199903??)
1625  Just some minor updates and bug fixes.
16272.2.1 (19990218)
1628  All: Removed compile warnings
1629  Module i2c-dev: Small bug removed if DEBUG=1 was used
1630  Module sis5595: Now compiles for 2.0 kernels
1631  Module adm1021: Detection corrected
16332.2.0 (19990216)
1634  All: Set copyrights to include 1999
1635  All: Small bugfixes
1636  I2C: Upgraded to newest archive of Simon Vogl
1637  Module i2c-dev: NEW
1638  Module i2c-ali15x3: NEW
1639  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1640     directories, and somewhat improved
1641  Module sis5595: NEW
1642  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1643  Library: Support for new chip drivers, several small bugs fixed
1644  Library manual pages: NEW
1645  Program i2cdetect: Moved to detect directory
1646  Program NEW
1647  Program doc-features: NEW
1648  Program sensors: Added man-page
1649  Document BUGS: Added cdrom bug and kernel i2c conflict
16512.1.2 (19990116)
1652  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1653  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1654  Documentation in doc/kernel: NEW
16562.1.1 (19990107)
1657  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1658                     and older
1659  Module gl518sm.o: Miscelaneous bugs and problems solved
1660  Program isadump: NEW
16622.1.0 (19981230)
1663  Library: Completely NEW
1664  Program sensors: NEW
1665  Program grab_busses: NEW
1666  Program decode-dimms: More information
1667  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1668  Module w83781d.o: NEW
1669  Module lm80.o: NEW
1670  Module gl518sm.o: new procfile beep, several small updates
1671  Modules: Now use pin readings, no more scaling within the kernel (use the
1672           library instead)
16742.0.2 (19981214)
1675  Module eeprom.o: NEW
1676  Program decode-dimms: NEW
1677  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1678           2.1.58
1679  Modules: Somewhat less verbose on transfers
1680  Module lm78.o now recognizes and handles lm78-j and lm79
16822.0.1 (1998121?)
1683  Module gl518sm.o updates, to make it actually work
1684  Module lm75.o high/low-byte swapping write bug fixed
16862.0.0 (19981209)
1687  Initial release
Note: See TracBrowser for help on using the browser.