root/lm-sensors/trunk/CHANGES @ 4653

Revision 4653, 82.2 KB (checked in by khali, 6 years ago)

Fix support for the Linux 2.6 thmc50 driver. Patch from Krzysztof Helt.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  Library: Fix a memory leak on error
6           Speed up sensors_get_ignored() a bit
7           Fix thmc50 support for Linux 2.6
8  Module i2c-piix4: Add ATI SB700 support (2.6 backport)
9  Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
10
11
122.10.4 (20070716)
13  File doc/vid: Update the sysfs paths, update the chip lists
14  File i2c-dev.h: Support I2C block reads with specified length
15  File sensors.conf.eg: Add a dme1737 section
16  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
17  Library: Clean up pwm symbol names translation
18           Add dme1737 support
19           Add applesmc support
20           Add abituguru3 support
21           Add f71882fg support
22           Add w83627ehf support (for Linux 2.4)
23           Add support for the w83627ehf VID function
24           Add support for the w83627ehf thermal sensor types
25           Add support for it87 fan4 and fan5
26  Man page sensors.conf.5: Update the chip statement section
27  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
28  Module lm85: Fix setting the fan speed min limit to 0
29               Add support for the EMC6D102 extra resolution bits
30  Module thmc50: Fix the i2c address range
31  Module w83627ehf: New (2.6 backport)
32  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
33  Program i2cdump: Use the new I2C block read function
34  Program isadump: Detect when address bit 7 is a busy flag
35                   Fix Super-I/O exit sequence for Winbond/Fintek chips
36  Program fancontrol: Use let for arithmetic evaluation
37                      No longer need awk and grep
38                      Limit calls to external programs (Linux 2.6 only)
39                      Check for configuration file validity
40                      Support optional min and max PWM values
41                      Better integration with init scripts
42                      Use linear control instead of quadratic
43  Program pwmconfig: Use smaller steps for low PWM values
44                     Support optional min and max PWM values
45  Program mkpatch: Include w83627ehf
46  Program rrd: Support non-i2c devices (hwmon class)
47               Add missing shell declarations
48               Update URI
49  Program sensors: Drop ddcmon and eeprom support
50                   Add dme1737 support
51                   Add applesmc support
52                   Add max6680 support
53                   Add abituguru3 support
54                   Add f71882fg support
55                   Fix alignment of alarm for one-limit temperatures
56                   Add w83627ehf support (for Linux 2.4)
57                   Add support for the w83627ehf VID function
58                   Add support for the w83627ehf thermal sensor types
59                   Add support for it87 fan4 and fan5
60                   Display the extra resolution bits of the emc6d102
61  Program sensors-detect: Stop Super-I/O probe after first family success
62                          Fix SMSC DME1737 detection
63                          Add /usr/sbin to the PATH (#2199)
64                          Add ATI SB700 detection
65                          Add Maxim MAX6680/MAX6681 detection
66                          Add IT8726F detection
67                          Fix IPMI support for 2.6 kernels
68                          Add detection for non-standard SMSC Super-I/Os
69                          No longer depend on i2cdetect
70                          Add SMSC SCH5317 detection
71                          Drop detection of most non-sensors I2C chips
72                          Fix ADM1022 detection
73                          Add detection of many SMSC Super-I/O chips
74                          Add Fintek F71806FG and F71862FG detection
75
76
772.10.3 (20070319)
78  Library: Do not skip i2c adapters with only a class device and no
79            physical device. This change is required to survive the
80            planned struct class_dev removal from future 2.6 kernels.
81           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
82           Recognize i2c-isa-based devices as such even after class_dev
83            is gone
84           Compile with -D_REENTRANT
85           Fix support of Linux 2.6's max6650 driver
86           Fix max1619 support
87  Man page i2cdetect.8: Scanning range can be restricted
88  Module bmcsensors: Fix debugging messages
89  Module i2c-ali1563: Improve the status messages (2.6 backport)
90                      Fix device initialization (2.6 backport)
91  Module i2c-amd8111: Cleanups (2.6 backport)
92                      Fix initialization race (2.6 backport)
93  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
94  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
95  Module i2c-viapro: Add CX700 support (2.6 backport)
96  Module smsc47m1: Add SMSC LPC47M292 support
97                   Get rid of a useless semaphore (2.6 backport)
98  Programs i2cdetect, i2cdump, isadump: Flush output in real time
99  Program i2cdump: Cleaner output in SMBus block read mode
100  Program fancontrol.pl: Fix pwmN_enable access (#2190)
101  Program sensors: Add smsc47m2 support (fans)
102                   Fix -A option (hide adapter name) on error
103  Program sensors-detect: Only probe relevant I2C addresses
104                          Drop ARP-capable device detection
105                          Add Maxim MAX6655/MAX6656 detection
106                           (Olexiy Avramchenko)
107                          Add Maxim MAX1668, MAX1805, MAX1989 detection
108                          Add VIA CX700 detection
109                          Drop legacy W83627HF ISA detection
110                          Don't bufferize stdout during probes
111                          Speed up the LM75 and LM77 detection
112                          Clean up the EEPROM detection
113                          Add Dallas DS75 detection
114                          Add SMSC LPC47M292 detection
115                          Add nVidia MCP61 and MCP65 detection
116                          Fix ADM1028 detection
117                          Add Nat. Semi. PC8347L Super-I/O detection
118                          Add SMSC SCH5504 Super-I/O detection (no sensors)
119                          Make the LM78 and W83781D detection safer
120
121
1222.10.2 (20070115)
123  RPM: Obsolete, removed
124  File doc/fan-divisors: Update
125  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
126  Library: Add support for the pc87247 driver (fans only)
127           Probe for busses before chips
128           Drop support for algorithm names
129           Add support for coretemp driver   
130           Major update/optimization of config-file scanner
131           Add config-file scanner regression tests
132           Add f71872f support
133           Add w83627dhg support (David Holl, #2157)
134           Get the i2c adapter names from classdev.name
135           Add adm1029 support (Corentin Labbe)
136  Man page i2cdetect.8: Describe the output convention
137  Man page sensors.1: Update (option -c) and clean up
138  Module bmcsensors: Fix several warnings
139                     Fix fragile structure initialization
140  Module i2c-i801: Add ICH9 support
141  Module p4b_smbus: Add support for the ICH5
142  Module f71805f: Fix the device address decoding (2.6 backport)
143  Module icspll: Delete. It was useless and dangerous.
144  Program decode-dimms.pl: Remove spaces at end of lines
145  Program eepromer: Fix loads of warnings
146  Program i2cdetect: Make the output clearer
147  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
148  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
149                            without need of recompilation.
150  Programs dump/*: More robust handling of user inputs
151  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
152                                  Add support for non-i2c drivers
153  Program fancontrol.pl: Disable debugging by default
154                         Add support for non-i2c drivers
155                         More tolerant config file parsing
156  Program sensord: Add pc87247 support (fans only)
157                   Add vt1211 support (#2150)
158                   Add w83627dhg support (David Holl, #2157)
159                   Add w83627ehf voltage support (Dave Platt)
160                   Add k8temp support (Dave Platt)
161  Program sensors: Add pc87247 support (fans only)
162                   Hide error on missing f71805f fan
163                   Handle option -c more efficiently
164                   Drop option -a (show algorithm names)
165                   Add f71872f support
166                   Add w83627dhg support (David Holl, #2157)
167                   Add adm1029 support (Corentin Labbe)
168                   Hide error on missing w83793 temp (Gong Jun)
169  Program sensors-detect: Add SMSC DME1737 detection
170                          Add Fintek F71882FG and EPoX EP1308 detection
171                          Add Intel Core thermal sensor detection
172                          Preallocate memory for I2C_FUNCS ioctl (#2138)
173                          Prevent misdetection of MAX6633/MAX6634/MAX6635
174                          Add Intel ICH9 detection
175                          Add Maxim MAX6648/MAX6692 detection
176                          Improve ADM1029 detection
177                          Add Andigilog chips detection
178                          Add Intel AMB FB-DIMM thermal sensor detection
179                          Add ATI SB600 detection
180
181
1822.10.1 (20060924)
183  File doc/developers/checklist renamed to dev/developers/release_checklist
184          with clarifications and updates for new SVN server.
185  File README.package: Delete.
186  File doc/busses/i2c-piix4: Update (2.6 backport)
187  File doc/developers/sysfs-interface: Update
188  File etc/sensors.conf.eg: Add an smsc47m192 section
189                            Comment out all set statements
190                            Add an it8716 section
191                            Add a w83793 section
192                            Adjust the vt1211 section to match the new driver
193                             interface
194  Library: Fix device scan when no i2c support is present
195           Add support for W83627EHF voltage inputs and alarms
196           Add support for the smsc47m192 driver
197           Fix all memory leaks (yeah!)
198           Fix no sensors being reported as an error
199           Add support for the IT8716F and IT8718F chips
200           Add support for the W83793 chip (Yuan Mu)
201           Map the 2.6 adm1026's fan8 to fan0
202           Missing sysfs busses and classes are not errors
203           Change vt1211 temp3-7 magnitude from 1 to 3
204  Makefile: Don't grep autoconf.h on user-space targets
205            Fix depmod on non-running kernel version
206            Remove empty include directories on make user_uninstall
207  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
208  Module i2c-amd756-s4882: Improve static semaphore initialization
209                           (2.6 backport)
210  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
211                   Add ICH8 support (2.6 backport)
212                   Fix block transaction poll loops (2.6 backport)
213                   Remove PCI function check (2.6 backport)
214                   Cleanups (2.6 backport)
215  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
216  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
217                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
218                    Drop the fix_hstcfg parameter (2.6 backport)
219  Module i2c-viapro: Fix compilation with kernels < 2.4.21
220                     Add VT8237A and VT8251
221  Module lm83: Add LM82 support (2.6 backport)
222  Module vt1211: The VT1211 has no in6
223                 Rework the voltage and temperature conversions and the
224                  temperature input order to match the Linux 2.6 driver
225  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
226                  Add specific alarm and beep defines for the W83791D
227  Module w83792d: Fix PWM range (2.6 backport)
228  Program decode-dimms.pl: Decode depending on the memory type
229                           Decode the manufacturing date to an ISO8601 date
230                           Add the memory size computation and provide brief
231                            timing characteritics for SDRAM/DDR/DDR2 memory
232                           Add memory size computation for Rambus memory
233                           Various output cleanups and fixes
234  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
235  Program decode-vaio.pl: Detect and skip false positives
236  Program i2cdetect: Add a mode to print adapter functionalities
237  Program i2cdump: Restore bank after bank switching
238                   Add new mode W (read word on even register addresses)
239  Program mkpatch: Fix typo breaking f71805f
240                   Turn warnings on (-w), and fix them
241                   Print a usage message on missing command line parameters
242  Program pwmconfig: Use mktemp instead of tempfile
243  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
244                   Add smsc47m192 support
245                   Add abituguru support (Hans de Goede)
246                   Fix memory leak when printing an unknown chip
247                   Add it8716 and it8718 support
248                   Make each it87 fan and fan div optional
249                   Print missing w83791d values
250                   Add w83793 support (Yuan Mu)
251                   The adt7463 may not have in4 (#2119)
252                   Hide more vt1211 missing input errors
253                   Clearer error messages when no sensors found
254  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
255                          Add ATI IXP200/300/400 SMBus detection
256                          Prevent warning on 64-bit PCI addresses
257                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
258                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
259                           F75384S/M, F75387SG/RG and F81218D detection
260                          Add Winbond W83793R/G and W83627DHG detection
261                          Handle the W83791D driver difference between kernels
262                          Add nForce4 MCP04, MCP51 and MCP55 detection
263                          Add AMD Geode devices detection
264                          Add ITE IT8716F and IT8718F detection
265                          Add NatSemi/Winbond PC87427 detection
266                          Get driver information for busy addresses from
267                           sysfs (2.6 only)
268                          Drop the ISA IT87xxF detection
269                          Check i2c adapter functionalities before probing
270                          Add Intel ICH8 SMBus detection
271                          Add AMD K8 thermal sensors detection
272                          Simplify detection of SiS5595, VIA686 and VT8231
273                          Add Analog Devices ADM1033, ADM1034, ADT7462,
274                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
275                          Check for root user at startup
276                          Attempt to be slightly more user-friendly
277                          Add VT8237A and VT8251
278                          Remove detection of nVidia graphics adapters
279                          Use sysfs for PCI device enumeration
280                          Add generic PCI SMBus adapter detection
281                          Add generic Super-I/O logical device detection
282                          Add SMSC LPC47M172/182 detection
283
284
2852.10.0 (20060214)
286  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
287  File doc/busses/i2c-viapro: Update (2.6 backport)
288  File doc/chips/via686a: Update (2.6 backport)
289  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
290  File etc/sensors.conf.eg: Do not set vrm by default
291  File i2c-dev.h: Fix union i2c_smbus_data definition
292                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
293                  Add missing parentheses around macros
294                  Drop I2C_FUNC_SMBUS_EMUL
295                  Drop I2C_FUNC_SMBUS_*_PEC
296                  Drop I2C_SMBUS_*_PEC
297  File sensors_vid.h: Drop default VRM
298  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
299           This is intentional.  Use decode-dimms.pl if you still
300           need your memory SPD data.
301  Library: Big update to use libsysfs.  More TODO though.
302           Fix bus matching code for Linux 2.6 (Karsten Petersen)
303           Add f71805f, w83687thf support
304           Add platform drivers support
305           Fix sysctl warnings on x86_64
306           Restore vt1211 temp1
307  Makefile: Compile user-space programs with -Wundef
308  Module i2c-i801: Simplify the hardware PEC code
309                   Always set PEC mode explicitly before each transaction
310  Module i2c-i810: Documentation update, PCI IDs cleanup
311  Module i2c-keywest: Remove bus probing code (2.6 backport)
312  Module i2c-nforce2: Remove dead code (2.6 backport)
313                      Add the ID of the nForce4 MCP-04 (2.6 backport)
314  Module i2c-via: Remove dead code
315  Module i2c-viapro: Remove dead code
316                     Support I2C block read (2.6 backport)
317                     Code cleanups (2.6 backport)
318                     Improve debug register dump (2.6 backport)
319  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
320          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
321          i2c-sis645: Use pci_driver name to request I/O region; do
322                      not initialize i2c_adapter name to "unset" (2.6
323                      backport)
324  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
325                                              (2.6 backport)
326  Module adm9240: Cleanups (2.6 backport)
327  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
328  Module it87: Minor cleanups
329               Fix fan3_div setting bug (Anton V. Staaf)
330  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
331               Separate the register read function
332               Add PEC support for the ADM1032
333  Module via686a: Cleanups
334  Module w83627hf: Drop useless initialization step (2.6 backport)
335                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
336                   Fix alarms (Yuan Mu)
337                   Preserve fan min on fan div change (Yuan Mu)
338                   Properly handle W83627THF without VID (Yuan Mu)
339                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
340                   Add W83687THF support
341  Module w83781d: Drop W83697HF support (Grant Coady)
342  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
343                  Fix fan control mode (PWM/DC) reporting
344                  Fix fan div auto-adjust (Yuan Mu)
345                  Fix the subclient handling
346  Module w83l785ts: Minor cleanup (2.6 backport)
347  Module vt1211: Restore temp1
348  Modules vt1211, vt8231: Change default VRM to 9.1
349  Program decode-dimms.pl: Add lookup tables for manufacturer names
350                           Fix rounding error in PCxxxx speed computation
351                           Improve text output
352                           Improve speed under Linux 2.6
353                           Verify checksum before decoding anything
354                           Improve manufacturing location decoding
355                           Improve memory type detection
356                           Improve part number decoding
357  Program i2cdump: Drop now useless #ifdef tests
358                   Fix capability check for continuous byte mode
359  Program i2cget: New
360  Program i2cset: Add PEC support
361                  Fix argc check
362  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
363                                       Print the correct bus type if bus
364                                       functionality can be queried
365  Program isadump: Display the real addresses in flat mode
366  Program mkdev.sh: Silently skip already existing nodes
367  Program mkpatch: Include f71805f
368  Program sensord: Do not log algorithm names
369                   Drop EEPROM support (Aurelien Jarno)
370                   Add W83627EHF, F71805F/FG support
371                   Fix PC87365/PC87366 alarms
372  Program sensors: Drop free_the_label
373                   Fix compilation with uclibc (no iconv)
374                   Add f71805f, w83687thf support
375  Program sensors-detect: Drop algorithm names
376                          Do not rely on i2cdetect -l printing algo names
377                          Simplify adapter name matching mechanism
378                          New address for ADM1032, ADT7461
379                          Improve ADT7467, ADT7468 support
380                          Fix MAX6659 reported driver
381                          Add Fintek F71805F detection
382                          Add Analog Devices ADT7476 detection
383                          Add Intel 82845G detection
384                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
385                          Fix udev detection in some corner case
386                          Improve DS1621 detection
387                          Always prefer ISA access over SMBus access
388
389
3902.9.2 (20050906)
391  File doc/chips/*: Big update (2.6 backport)
392  Library: Drop ds1780-specific code (now use adm9240)
393           Fix memory leak in sensors_get_label()
394           Support /sys/class/hwmon (Linux 2.6.14+)
395           Limit stack usage in sensors_read_proc_chips()
396  Makefile: Detect 2.6+ kernels and check targets
397  Man page isaset.8: Fix typos
398  Module adm1031: Fix broken kfree() calls
399  Module i2c-ali1563: New (2.6 backport by Winbond)
400  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
401  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
402          w83627hf.c: Tag find function __init
403  Module lm93: Fix memory leak
404  Module smsc47m1: Fix PWM enable polarity on read
405  Modules w83627hf, w83781d: Allow setting fan divisor to 128
406  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
407                           Added DDR/DDR2 frequency reporting in convenient
408                           form of DDRxxx PCyyyy
409  Program i2cdump: Properly handle short i2c block reads
410  Program fancontrol.pl: Fix compile errors
411  Program mkpatch: Include i2c-ali1563
412                   Include w83792d
413  Program pwmconfig: Fix unsafe temporary file use
414  Program rrd: Support 2.6 kernels
415  Program sensord: Add support for w83637hf
416                   Support pc87360 (Henrik Brix Andersen)
417  Program sensors: Support the VAIO "VGN" prefix for eeprom
418  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
419                          Advertise the w83792d driver
420                          Improve IT8705F and IT8712F detection
421                          Merge LM82 and LM83 detection
422                          Add W83687THF detection
423
424
4252.9.1 (20050412)
426  File doc/busses/i2c-nforce2: Update
427  File doc/chips/it87: Update
428  File doc/chips/lm90: Update for adt7461
429  File doc/chips/mic74: New
430  File etc/sensors.conf.eg: New sections for lm92 and w83792d
431  Library: Add support for 2.6 fscpos driver (Stefan Ott)
432           Fix sis5595 in4 (Aurelien Jarno)
433           Add support for 2.6 gl520sm driver (Maarten Deprez)
434           Add support for 2.6 bmcsensors driver (Yani Ioannou)
435           Add support for w83792d (Chunhao Huang/Winbond)
436           Add support for 2.6 adt7461 (James Chapman)
437           Add support for 2.6 lm92
438           Add support for 2.6 vt1211
439           Add preliminary support for 2.6 w83627ehf
440  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
441            Use -fno-strict-aliasing on all architectures
442  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
443  Module bmcsensors: Fix compile error
444                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
445  Module ds1621: Fix detection (Aurelien Jarno)
446  Module eeprom: Discard SPD-centric checksum module parameter
447                 Cleanup detection function (backport from Linux 2.6)
448  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
449  Module i2c-i801: Temporarily disable broken I2C block read
450  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
451                   Gelato)
452  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
453  Module i2c-viapro: Prevent repeated resets
454  Module it87: Improve Super-I/O detection
455               Limit I2C address range
456               Support VID on the IT8712F
457  Module lm75: Only initialize CMP/INT bit
458  Module lm78: Fix bug with setting negative temperature limits
459  Module lm85: Properly differentiate between ADM1027 and ADT7463
460               Add EMC6D102 support
461  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
462               Add limited ADT7461 support
463  Module lm93: Fix IN10 (+5V) scaling
464  Module mic74: New
465  Module w83627hf: Support secondary Super-I/O address
466                   Enable temp2 and temp3 if they are disabled
467  Module w83781d: Revert AS99127F temp2 and temp3 computation change
468                  Skip final initialization step for AS99127F chips
469  Module w83792d: New (Chunhao Huang/Winbond)
470  Program ddcmon: New; user-space replacement for the ddcmon driver
471  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
472  Program isadump: Handle Super-I/O keys
473  Program lm_sensors.init: Cleanups (Axel Thimm)
474  Program mkdev.sh: Add basic command-line interface
475  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
476  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
477                     Don't complain about read-only enable files (lm85)
478                     Fix handling of alternate config file name
479  Program sensord: Fix erroneous error message (Aurelien Jarno)
480                   Support sis5595 in4 (Aurelien Jarno)
481                   Support w83627thf
482                   Support the separate it8712 prefix (Aurelien Jarno)
483  Program sensors: Display sis5595 in4 (Aurelien Jarno)
484                   No errors on missing pc87360 fans
485                   Add gl520sm support (Maarten Deprez)
486                   Improve vt1211 error/ignore handling (Michael Carland)
487                   Support w83792d, w83627ehf
488  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
489                          Improve IT8705F and IT8712F detection
490                          Improve udev detection
491                          Fix DS1621 detection
492                          Add W83627EHF detection
493                          Add ATI SMBus detection
494                          Add VT1211 alias detection
495                          Warn if chip modules not found
496                          Add i2c-ipmi to list if bmcsensors is on it
497                          Add PC87591 detection
498                          Search for correct udev db file name
499                          Add nForce3 250Gb and nForce4 detection
500
501
5022.9.0 (20041228)
503  NOTE: Requires i2c-2.9.0 or newer!
504  File README.thinkpad: Update
505  File doc/chips/it87: Cleanups
506  File doc/chips/lm63: New
507  File etc/sensors.conf.eg: Set via686a voltage limits
508  File kernel/chips/Module.mk: Resync module list with mkpatch
509  File kernel/include/sensors_compat.h: Define __devexit_p if missing
510                                        (kernels 2.4.16 and older)
511  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
512                             and dec_use removed in release 2.8.0
513  Modules (all chip drivers): Remove owner from i2c_driver; pass
514                              controlling_mod to i2c_register_entry() again
515  Module bmcsensors: Support function 1/x
516  Module i2c-amd756: Display the real bus name
517  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
518  Module i2c-i801: Support i2c block read (ICH5 and higher)
519                   Add PEC support for ICH6
520                   Add support for ICH7
521  Module i2c-ipmb: Remove from build since it doesn't work
522  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
523  Module icspll: Fix compilation
524  Module lm63: New driver for the National Semiconductor LM63
525  Module lm83: Use signed types for temperatures
526               Check limits on register writes
527  Module lm87: Round voltages properly
528               Retry on read errors (David Knierim)
529               Less agressive init (no reset)
530  Module lm90: Use signed types for temperatures
531               Check limits on register writes
532  Module lm93: Added module parameter for VID pin input thresholds.
533               Fix typo in dynamic VID alarms
534               Adds a couple log messages for failed transactions (David
535               Knierim)
536               Fix compilation breaking C99-ism (Axel Thimm)
537               Fix block read retries
538  Module pc87360: Support secondary Super-I/O address
539  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
540  Library: Add lm63 support
541           Add lpc47b397 support
542  Programs *.init: Rename lockfile to match file name
543  Programs i2cset, isaset: Written byte/word can be masked
544  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
545  Program mkpatch: Include i2c-amd756-s4882
546  Program pwmconfig: Handle new (well, back to old) pwm files names for
547                     Linux 2.6.10 and up
548  Program sensord: Do not scale load average (Aurelien Jarno)
549  Program sensors: Add lm63, lpc47b397 support
550                   Support DDR2 memory module EEPROMs (Rudolf Marek)
551                   Support only one location for the default configuration file
552                   Display the default configuration file location in --help
553                   Simplify the configuration file opening code
554  Program sensors-detect: Improve LM63 detection
555                          Discard IBM Thinkpad detection code
556                          Add PCA9556, LPC47B397, ICH7 detection
557                          Fix W83792D detection, add W83791SD detection
558
559
5602.8.8 (20041007)
561  File doc/donations: Update
562  File doc/lm_sensors-FAQ.texi: Add 4.6.1
563                                Update 4.7
564  File doc/chips/gl518sm: Update "iterate" info
565  File doc/chips/it87: Discard outdated module parameters
566  File doc/chips/lm75: LM77 is not supported
567  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
568  File doc/chips/lm93: New
569  File doc/chips/w83l785ts: Improvements
570  File etc/sensors.conf.eg: Fix it87 lines order
571                            Update lm87 section
572  File kernel/include/sensors_vid.h: Support VRM 10.0
573  Library: Support 2.6 adm1025
574           Preliminary support for 2.6 lm87
575           Support 2.6 adm9240
576           Allow an alternative sysfs file name for chip features (2.6)
577           Fix lm83 critical limits (2.6)
578           Add lm93 support
579           Prevent some procfs errors from being silently ignored
580  Makefiles: Implement user_uninstall (Rudolf Marek)
581             Spoof LOGNAME and HOSTNAME when making html man pages
582  Module adm1025: Refine detection
583                  Update limit registers again (revert of 2.8.1)
584                  Init high limits if they read 0
585                  Fix conversions
586  Module lm75: Refine detection
587  Module lm78: Fix init
588  Module lm83: Default to kind lm83 if forced.
589               Fix temperature macros.
590  Module lm90: Add LM86, MAX6657 and MAX6658 support
591  Module lm93: New
592  Module mtp008: Fix the setting of limits on temp2
593  Module pca9540: Refine detection
594  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
595                  Support VID
596                  Fix fan_div file when fan count is less than 3
597                  Additional init and debug
598  Module smsc47m1: Fix pwm_enable being inverted
599  Module w83627hf: Add alternate VCORE/in0 calculation method
600                   Remove reset of chip by driver on initialization
601  Module w83781d: Fix default VRM for w83791d
602  Module w83l785ts: Implement read error handling (backport from 2.6)
603  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
604                    Wait for user input to continue (as opposed to 5 sec
605                    delay), can be skipped with -y
606                    Various cleanups and code refactoring
607                    Update manual pages
608  Program fancontrol.init: New (Dean Takemori)
609  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
610  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
611                           (Giuseppe Della Bianca)
612  Program mkdev.sh: Detect devfs and refuse to run
613                    Use mknod's mode instead of chmod
614  Program mkpatch: Include xeontemp and pc87360
615  Program sensors: Rework adm1025 support
616                   Display pc87365/pc87366 VID
617                   Improve smsc47m1 support
618                   Hide 2.6 adm1027 alarm_mask being missing
619                   Print VRM version for all supported chips
620  Program sensors-detect: Support LM93, LM77, LM63
621                          Support PC8739x Super-I/O family (no sensors)
622                          Fix PCA9540 support
623                          Refine ADM1025/ADM1025A detection
624                          Refine LM75 detection
625                          Ignore missing /proc/modules (Andras Bali)
626                          Script-wide Perl cleanups
627                          Support udev
628                          Support W83792D, LM96000
629
630
6312.8.7 (20040611)
632  File README.thinkpad: Update 24RF08 status
633  File doc/fan-divisors: More info on accuracy
634  File doc/lm_sensors-FAQ.texi: Update 4.27
635  File doc/chips/adm1031: New
636  File doc/chips/max1619: New
637  File doc/chips/pc87360-fan: Renamed to pc87360
638  File doc/chips/pc87360: Big update
639  File doc/chips/w83781d: Update AS99127F documentation
640  File etc/sensors.conf.eg: Add comments about BP6 voltages
641                            Add comment on Asus A7V8X-X VCore
642                            Misc fixes to lm80 section
643                            Update via686a section
644                            New lm99 section
645                            Add section for LM85-like chips
646                            Preliminary pc87366 section
647                            Add comment on GL520SM application modes
648                            Document beep_enable (Aurelien Jarno)
649                            Preliminary max1619 section
650                            Preliminary adm1030 and adm1031 sections
651  Library: Fix 2.6 VRM
652           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
653           Fully support the PC87360 family
654           Support the lm99
655           Add version and date strings
656           Support 2.6 max1619
657  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
658  Man page i2cdetect.8: document new command line flags
659  Man page i2cdump.8: More details on how i2cdump can write to a chip
660  Modules (all chip drivers): Rework memory allocation scheme.
661  Module adm1031: New (Alexandre d'Alton)
662  Module bmcsensors: Fix oops by creating thread for initialization
663  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
664  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
665          asb100.c, lm92.c: Use swab16
666  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
667  Module gl520sm: Less agressive initialization process
668                  Fix temp1 limits being unsettable in application
669                  Ensure that temp2 and in4 are not used at the same time
670  Module i2c-i801: Support 6300ESB and ICH6
671  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
672  Module i2c-sis645: Add support for SiS655
673  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
674  Module lm90: Support LM99 and LM89
675  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
676               Get rid of useless i2c_probe call
677  Module max1619: New (Alexey Fisher)
678  Module p4b_smbus: Add support for mobile versions of the 82801
679                    (Axel Thimm)
680  Module pc87360-fan: Renamed to pc87360
681  Module pc87360: Also support PC87365 and PC87366
682                  Add write support
683                  Correctly set the chip name depending on the type
684                  Add voltage and temperature support
685                  Fix fan speed computation
686                  Retrieve fans configuration from Super-I/O space
687                  Export pwm_enable (read-only)
688                  Honor pwm invert bits
689                  Clear fan alarms after we read them
690                  Do not read fan data when monitoring is disabled
691                  Do not include SENSORS_INSMOD stuff
692                  New module parameter: init
693                  Fan clock dividers change automatically
694                  Add thermistor dupport
695  Module smsc47m1: Lock on reads and writes
696                   Various PWM fixes
697  Module thmc50: Fix address range
698  Module via686a: Fix voltage roundings
699                  Simplify temperature conversions
700  Module w83781d: Drop PWM support for as99127f
701                  Invert AS99127F beep bits in driver rather than user-space
702  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
703  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
704  Program fancontrol.pl: New
705  Program i2cdetect: Adapt probing method to address
706                     Add -q and -r flags to force probing methods
707                     Allow probing range selection
708  Program isadump: Major improvements
709  Program isaset: New
710  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
711                   module
712                   Include i2c-nforce2
713  Program sensord: New --rrd-no-average parameter
714                   Syncronize time slots with rrd
715                   Fix W83781D temp3 alarm (Aurelien Jarno)
716                   Add ASB100 support (Andrew May)
717  Program sensors: Fully support the PC87360 family
718                   Fix lm80 temperature alarms
719                   Support the lm99
720                   Do not invert AS99127F beep bits anymore
721                   Fix W83781D temp3 alarm (Aurelien Jarno)
722                   Print library version string
723  Program sensors-detect: Rework Super I/O detection
724                          Support SiS655/SiS96x
725                          Support ADT7461 and ADT7467
726                          Better support for ADM1027, ADT7460 and ADT7463
727                          Explicitly support ADM1028
728                          Scan all logical devices of PC87365 and PC87366
729                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
730                          Detect eeproms with software write protect (not
731                          enabled by default)
732                          Support ALi 1563 (2.6 only)
733                          Drop LTC1710 support
734                          Use byte reads for probing on ranges 0x30-0x37 and
735                          0x50-0x5F
736                          Improve LM89 and LM99 support
737                          Support GeForce FX 5900 video cards
738                          Fix devfs misdetection (Aurelien Jarno)
739                          Detect 6300ESB, ICH6
740                          Fix double detection of ISA chips
741                          Support MAX1619
742                          Support PC87373 Super-I/O
743                          Fix unknown adapters appearing multiple times
744                          Refine MAX6650/MAX6651 detection
745
746
7472.8.6 (20040405)
748  File README.thinkpad: Update status
749  File doc/chips/pca9540: New
750  File doc/chips/pc87360-fan: New
751  File etc/sensors.conf.eg: Update pcf8591 default configuration
752  Library: Switch to new sysfs naming standard
753           Fix gcc 3.3 warnings (Philipp Thomas)
754           Support 2.6 ds1621 and pcf8591
755           Change pcf8591 magnitudes
756           Support pc87360-fan
757  Makefile: Install shared library 755
758  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
759  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
760  Modules ds1621, pcf8591: Check for capabilities before using them
761                           (Aurelien Jarno)
762  Modules pcf8574, pcf8591: Cleanups
763  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
764  Module adm1021: Better detection and initialization
765  Module pca9540: New driver for the Philips PCA9540
766  Module pc87360-fan: New driver for the National Semiconductor PC87360,
767                      PC87363 and PC87364 Super I/O chips
768  Module smsc47m1: Support the LPC47B27x
769  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
770  Program i2cdetect: Skip special addresses by default
771  Program sensord: Prevent null pointer dereference (Tim Toohey)
772  Program sensors: Print the degree symbol in the terminal's current locale
773                   (Aurelien Jarno)
774                   Update pcf8591 print to support 2.6 driver
775                   Support pc87360-fan
776  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
777                          Improved SiS chips support
778                          Add a white list of IBM systems
779                          Drop support of undetectable adapters
780                          Fix smart battery detection
781                          Add smart battery charger and manager detection
782                          Rework adm1021 and clones detection
783                          The PC87360, PC87363 and PC87364 Super I/O chips
784                          now have a (preliminary) driver
785                          Rework Super I/O detection
786                          Better support of devfs
787  Program sensors-detect-stat.pl: New
788
789
7902.8.5 (20040305)
791  File doc/chips/SUMMARY: Update
792  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
793  Makefiles hotplug and rrd: Remove -o and -g arguments to install
794  Module bmcsensors: Increase max SDRs to 100
795  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
796  Module i2c-amd756: Don't register driver to avoid driver conflicts.
797                     (Daniel Rune Jensen)
798  Module it87: Better temperature sensor types handling (Takeru Komoriya)
799               Fix reset=1 (Takeru Komoriya)
800  Module lm80: Code cleanups
801  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
802  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
803  Module w83627hf: Add w83637hf support
804                   Fix exported name
805                   Fix PWM in w83627thf
806                   Preserve other bits when forcing temp2/3 to comparator mode
807  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
808                  Remove asb100 support
809  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
810          Define driver ID if i2c-id.h doesn't have it yet.
811  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
812          Backport oops fix from Linux 2.6.
813  Modules (all chips): Get rid of useless headers
814  Program decode-edid.pl: Add sysfs support
815  Program sensors: Add w83637hf support
816                   Add support for Shuttle Ethernet EEPROMs
817                   Drop 2.6 subclient detection
818  Program sensors-detect: Add heuristics to the LM80 detection function
819                          Add support for W83L785R, improve W83L784R/AR
820                          Add GeForce FX 5600 as supported by rivatv
821                          More Super IO chips, better handling
822  Library: Update to match renames in fscher
823           Reverse temporary changes to w83l785ts mappings
824           Fix vt1211 and vt8231 uch_config not being writable
825           Add 2.6 lm80 support
826           Add w83637hf support
827           Remove in6 and temp1 from vt1211 and vt8231
828           Add support for Shuttle Ethernet EEPROMs
829           Remove unused as99127f features
830
831
8322.8.4 (20040207)
833  File doc/lm_sensors-FAQ.texi: Update 4.20.
834  File doc/chips/it87: Change hyst to low
835  File doc/chips/w83l785ts: New
836  File etc/sensors.conf.eg: Change it87 hyst to low
837                            Fix w83697hf supposed to have temp3
838                            Limits initialization for adm1025/ne1619
839                            Handle fscher voltage conversions
840                            Add Tyan Trinity S2495 KT400 setup (Eric
841                              Schumann)
842                            Fix fscher fan labels (Reinhard Nissl)
843  Library: Better 2.6 eeprom support
844           Change it87 hyst to low
845           Add 2.6 gl518sm, fscher support
846           Fix 2.6 negative voltages handling
847           Temporary fix to w83l785ts mappings
848  Module adm1025: Separate prefix for NE1619
849  Module adm1026: Remove use of temporary ID
850                  Define addresses as a range
851  Module bmcsensors: Fix reservations
852  Module fscher: Externalize voltage conversions
853  Module eeprom: Remove memtype
854  Module i2c-piix4: Fix resource release error
855                    Various cleanups
856  Program decode-vaio.pl: Add sysfs support
857  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
858                   Drop linux 2.2 support
859                   Add w83627hf
860  Program sensors: Do not show algorithm by default
861                   Cleanup temperature unit display code
862                   Cleanup label spacing code
863                   Fix output to UTF-8 terms (Marcel Sebek)
864                   Simplify gl518sm print
865                   Do not ignore errors in FSC chips prints
866                   Fix w83l785ts print
867                   Cleanup FSC chips prints
868  Program sensors-detect: Fix PATH issues
869                          Correctly point to the fscher driver
870
871
8722.8.3 (20040115)
873  File lm_sensors.spec: Update
874  Library: Add 2.6 eeprom, lm90 support
875           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
876  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
877  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
878  Module i2c-amd756: Fix byte writes
879  Module i2c-tsunami: Cleanups (Daniel Nilsson)
880  Module it87: Fix sg_tlx writes; fix sensor type reporting;
881               add 8712 Super I/O detection;
882               remove initialization of temp_type and fan_ctl;
883               remove init and temp_type module parameters
884  Module lm90: Handle hysteresis differently
885  Module smartbatt: Fix detection, magnitudes, temp
886  Module w83781d: Fix negative voltages
887  Module w83l785ts: New
888  Program eeprog: Make 8 bit mode the default
889  Program fancontrol: Improvements, fixes, support 2.6 kernels
890  Program mkpatch: Add lm75.h
891  Program pwmconfig: Improvements, fixes, support 2.6 kernels
892  Program sensors: Add ASB100 support
893  Program sensors-detect: Add 8712 Super I/O detection;
894                          add W83L785TS detection
895
896
8972.8.2 (20031211)
898  IMPORTANT: Limit initialization removed from all chip drivers!
899             If you didn't run 'sensors -s' in the past you may need to now!
900  File sensors.conf.eg: Change lm75 scaling back to 1;
901                        Add example for asb100
902  Library: Fix bmcsensors scaling, increase number of sensors;
903           Add w83627thf support; Advance version to 3.0.0;
904           Add hermes, ADM1032, ASB100 support;
905           Add it87 sensor type support;
906           Add sysfs support for kernel 2.6;
907           Fix memory leaks
908  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
909             Fail if no kernel .config file exists;
910             Don't build module dependencies for user and user_install
911  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
912          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
913          smsc47m1, thmc50, via686a, w83627hf, w83781d:
914          Remove initialization of limits by driver.
915  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
916  Modules (chip): Init cleanups
917  Module asb100: New
918  Module bmcsensors: Fix voltage scaling, voltage and fan limits
919  Modules ddcmon, eeprom: Add failure printks
920  Module fscher: New (Fujitsu-Siemens Hermes driver)
921  Module i2c-amd756: Fix AMD8111 support
922  Module i2c-amd8111: Fix byte writes
923  Module i2c-nforce2: Fix byte writes
924  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
925  Module i2c-sis630: Sync with 2.6.0-X driver version
926  Module i2c-viapro: Add support for Via 8237
927  Module it87: Add pwm and "smart guardian" support;
928               add it87 sensor type support
929  Module lm75: Fix negative voltages
930  Module lm90: Add ADM1032 support
931  Module w83781d: Fix 791d and 627hf detection
932  Module w83627hf: Add VID support
933  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
934  Program eeprog: New
935  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
936                                       support sysfs for i2c bus search
937  Program i2cdetect: Add -l option to list busses
938  Program i2cdump: Add 'c' mode for consective address reads
939  Program mkpatch: Cleanups
940  Program pwmconfig: Handle multiple fans controlled by a single pwm
941  Program sensord: Remove ddcmon support
942  Program sensors: Add ADM1032 support; add messages for sysfs
943  Program sensors-detect: Prefer Super I/O drivers;
944                          Fix W83627HF and W83791D detection; detect CSB6;
945                          Detect ADM1029, ADM1030, ADM1031;
946                          Detect W83637HF, W83697UF;
947                          Add it87 sensor type support; add sysfs support
948                          Reduce lm80 misdetects; remove PCFxxxx "detection"
949                          Detect VT8237 (KT600)
950                          Use VPD instead of DMI+ACPI for Thinkpad detection
951                          Suggest new asb100 driver instead of w83781d
952
953
9542.8.1 (20031005)
955  NOTE: Requires i2c-2.8.1 or newer!
956  File sensors.conf.eg: Improved adm1025 section
957                        Default temp labels for as99127f
958                        Improved lm83 section
959                        Better support for Asus A7V8X-X
960  File doc/chips/SUMMARY: Add SMSC manufacturer ID
961  File doc/chips/adm1025: Add decent documentation (almost new)
962  File doc/chips/lm83: Known motherboards list update, misc updates
963  Library: Change adm1025 names (hyst/over become low/high)
964           Swap adm1025 temp1 and temp2 to match the driver's order
965           Advance version to 2.0.1
966           Update lm83 support
967           Add support for lm90, xeontemp, max6650
968           Add separate messages for read and write errors
969           Add missing message for parse error
970  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
971  Modules (various): Fix includes for compilation on Alpha
972                     Use the new i2c_delay function instead of the various
973                     do_pause functions
974  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
975  Module i2c-nforce2: Cleanups
976  Module i2c-i810: Use readl/writel for portable access to PCI memory
977  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
978  Module i2c-savage4: Use readl/writel for portable access to PCI memory
979  Module i2c-sis630: Fix detection
980                     Add block data read/write support
981  Module i2c-sis645: Detection method change/bugfix
982  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
983  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
984  Module adm1025: Major driver update
985                  Add support for Philips NE1619
986                  Simplify the driver a lot (unified voltages, unified
987                  temperatures and much more)
988                  Fix default voltage limits
989                  Change default temperature limits
990                  Swap remote and local temperatures to match the internal
991                  registers order (make the code unification possible)
992                  Export remote diode fault through alarms
993  Module ddcmon: Major update
994                 Add half a dozen new features
995                 Add checksum parameter (same as for the eeprom module)
996                 Fix monitor limits
997  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
998  Module lm78: Fix a fan_div/fan_min bug
999  Module lm83: Add t_crit and alarms support
1000  Module lm90: New
1001  Module max6650: New
1002  Module saa1064: New
1003  Module smsc47m1: Add support for 47M142
1004  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1005                   enhance w83627thf support
1006  Module w83781d: Enhance chip detection; clean up error returns;
1007                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1008  Module xeontemp: New
1009  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1010                           Mark Rambus as unsupported
1011  Program decode-edid.pl: New
1012                          Interfaces between our eeprom module and
1013                          parse-edid from the read-edid project
1014  Program p4b_smbus: Fix SMP compilation
1015  Program sensord: Add support for IT87 (Mike Black)
1016                   Change ADM1025 support to match the changes made to
1017                   the library
1018  Program sensors: Rewrite and enhance EEPROM support
1019                   Change LM83 and ADM1025 support to match the changes
1020                   made to the library
1021                   Add DRDRAM support to print_eeprom
1022                   Exit(1) on /proc write failure (Malte Starostik)
1023                   Add LM90, MAX6650 support
1024  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1025                          Add support for LM82, LM86, LM89
1026                          Improved W83781D family detection
1027                          Add support for AS19927F rev.2, ASB100 Bach
1028                          Add support for Asus Mozart-2 (3 types)
1029                          Add support for NE1619
1030                          Add support for FSC Hermes
1031                          Make sure /sbin is in the user's path
1032                          Fix EEPROM detection
1033                          Automatic module.conf and /dev/i2c* detection
1034                          Improve LM82 and LM83 detection
1035                          Handle "to-be-written" cleanly
1036                          Add detection for 47M14x Super I/O
1037                          Handle the one-address-many-chips-same-driver
1038                          case
1039
1040
10412.8.0 (20030714)
1042  NOTE: Requires i2c-2.8.0 or newer!!!
1043  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1044                  2.4.13 or later required for mkpatch.
1045  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1046                  i2c package
1047  File doc/chips/fscscy: Add watchdog documentation
1048  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1049  File sensors.h: Now automatically generated
1050  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1051           add adm1026, lm83, lm85, w83791d support;
1052           Advance version to 2.0.0
1053  Makefiles: Generate warnings if new library won't be found by ld.so;
1054             Modules now install in kernel/drivers/i2c/[busses,chips];
1055             Ensure that headers in /usr/local/include are used first;
1056             Don't use /usr/include headers for modules;
1057             Handle multiple UTS_RELEASE definitions in linux/version.h;
1058             Automatically generate kernel/include/sensors.h;
1059             Remove old gzipped modules; remove old misc directory if empty;
1060             Remove pre-2.4 installation method;
1061             -Wall now the default;
1062             Add new targets user, user_install, and help;
1063             Run depmod after module installation
1064  Modules (all): Cleanups including
1065                - Add #include <i2c-proc.h>
1066                - C99 initializers
1067                - Remove #ifdef MODULE
1068                - Remove #ifndef THIS_MODULE
1069                - Remove #ifndef MODULE_LICENSE
1070                - Remove other 2.1/2.2 #ifdefs
1071                - Remove #include "sensors.h", copy SYSCTL defs to module
1072                - Remove excess #includes
1073                - Remove argument in i2c_register_entry()
1074                - Remove dummy xxx_command() definition
1075                - Remove EXPORT_NO_SYMBOLS
1076                - Remove init_MUTEX #define
1077                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1078                  no longer adjust their own refcounts
1079                - Use module_init() and module_exit()
1080                - Update to new i2c_driver struct definition
1081  Modules (bus PCI): Convert to PCI-module-style initialization
1082  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1083  Module adm1021: Set alarm on failed reads and report old value;
1084                  merge changes from kernel 2.5.54
1085  Module adm1026: New
1086  Module bmcsensors: Fix compile when DEBUG=1
1087  Modules ddcmon, eeprom: Use i2c block reads if possible;
1088                          better error handling
1089  Module ds1307: Add to Makefile
1090  Module gl520sm: Fix temperature over/hyst writes
1091  Module lm75: merge changes from kernel 2.5.54
1092  Module lm83: New
1093  Module lm85: New
1094  Module i2c-ali1535: Check for invalid transaction
1095  Module i2c-ali15x3: Check for invalid transaction
1096  Module i2c-amd756: merge changes from kernel 2.5.54;
1097                     check for invalid transaction
1098  Module i2c-amd8111: merge changes from kernel 2.5.54
1099  Module i2c-i801: Add support for 82801EB (ICH5)
1100  Module i2c-i810: Fix for some chips
1101  Module i2c-nforce2: New
1102  Module i2c-piix4: Check for invalid transaction
1103  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1104  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1105        north bridges; SiS962 and SiS963 south bridges
1106  Module i2c-viapro: Check for invalid transaction
1107  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1108          pwm and pwm enable support; update docs
1109  Module smbus-arp: Check adapter for HW or SW PEC support;
1110                    add reset option
1111  Module w83781d: Add support for w83791d
1112  Module w83627hf: New
1113  Program decode-dimms.pl: Recognize DDR and Rambus
1114  Program eeprom: Fix writes for small eeproms
1115  Program eeprom, eepromer: Use local i2c-dev.h for build
1116  Program fancontrol: New
1117  Program lm_sensors.init: Call sensors -s in start()
1118  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1119                   Add adm1026,lm85 support;
1120                   Remove sensors.c file; add sensors_compat.h;
1121                   Remove patches to i2c-core.c and drivers/char/mem.c;
1122                   Now works only for kernels 2.4.13 or later
1123  Program p4b_smbus: Fix 'make install';
1124                     Install in same place as other modules;
1125                     Clear correct bits in config word
1126  Program pwmconfig: New
1127  Program sensors: add adm1026, lm85, w83791d support
1128  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1129                          w83627hf, w83627thf, w83697hf);
1130                          Add support for SiS651, SiS961, SiS745, SiS746;
1131                          Support dmidecode 2.0 and later;
1132                          Fix "C" format error;
1133                          Add support for adm1026, 82801EB (ICH5), W83791D;
1134                          Add support for w83l785ts, nForce2;
1135                          Fix UTF-8 incompatibility;
1136                          Better support for lm75;
1137                          Add support for lm83
1138
11392.7.0 (20021208)
1140  NOTE: Requires i2c-2.7.0 or newer.
1141  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1142  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1143  File doc/busses/i2c-sis645: Add license
1144  File doc/chips/lm92: Add license, features
1145  File doc/chips/maxilife: Add license, parameters, features
1146  File doc/chips/smartbatt: Complete rewrite
1147  File doc/chips/vt8231: Add license, parameters
1148  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1149  Library: Add support for MC1066; add multiple VRM version support for lm87;
1150           enhance adm1023 support; initial support for Sony Vaio eeprom;
1151           add support for bmcsensors; add hacks for additional dummy drivers
1152  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1153            add flags for x86_64 compiles
1154  Module adm1021: Add support for MC1066
1155  Module bmcsensors: New
1156  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1157                   kernel 2.5.43; fix 2.2 kernel compiles
1158  Module gl518sm: Iterate allowed only for rev 0x00
1159  Module i2c-amd756: Configure base address for nForce support;
1160                     check for uninitialized base address;
1161                     add support for amd8111 (SMBus 1.0)
1162  Module i2c-amd8111: New (SMBus 2.0)
1163  Module i2c-ipmb: New
1164  Module i2c-ipmi: New
1165  Module i2c-keywest: Sync with kernel 2.4.20
1166  Module i2c-sis630: Add support for SiS730
1167  Module i2c-sis645: Improve support for SiS645/961;
1168                     add support for SiS645DX/961 and SiS735;
1169                     fix 2.2 kernel compiles
1170  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1171  Module lm87: Add multiple VRM version support
1172  Module vt1211: Fix inx limits and alarms; fix in0
1173  Module vt8231: Fix inx limits and alarms; fix in0
1174  Module w83781d: Fix in0/in1 initialization
1175  Module smartbatt: New
1176  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1177  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1178                           stop decoding on checksum error
1179  Program dmidecode: Fix read bug; upgrade to version 1.8
1180  Program doc-insmod: Complete rewrite; fix author output
1181  Program doc-features: Complete rewrite; handle missing sysctl entries;
1182                        handle unknown prefix with suggestion
1183  Program lm_sensors.init: Remove spaces bug; add green/red output
1184  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1185  Program rrd: Add sanity limits to newly-created RRD.
1186  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1187  Program sensors: Add support for MC1066, Rambus Rimms;
1188                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1189                   initial support for Sony Vaio eeprom
1190  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1191                          IPMI, AMD8111; add help if no sensors found;
1192                          add ACPI method for IBM system detection;
1193                          work with old Perl versions again;
1194                          initial support for Sony Vaio eeprom
1195
11962.6.5 (20020915)
1197  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1198  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1199  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1200  Module dmi_scan: new
1201  Module ds1621: Fix enable/disable
1202  Module eeprom: Do not corrupt 24RF08's when checksum=1
1203  Module i2c-i801: Check for uninitialized base address;
1204                   enable if not enabled
1205  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1206  Module i2c-sis630: new
1207  Module i2c-sis645: new
1208  Module lm92: Fix in-kernel initialization
1209  Module via686a: Remove VT8231 support
1210  Module vt8231: new
1211  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1212  Program dmidecode: new
1213  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1214  Program mkpatch: Add Config.in entries for, lm92,
1215                   pcf8574, pcf8591, smsc47m1, vt1211;
1216                   add dmi_scan
1217  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1218  Program lm_sensors.init: fix stop()
1219  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1220                   add support for logging loadavg in RRD;
1221                   fix down-converting raw labels for RRD;
1222                   update chip support, still behind sensors
1223  Program sensors: Add /usr/local/etc to config file path;
1224                   fix -c and -u flags; add vt8231
1225  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1226                          refuse to run on IBM systems;
1227                          fix sysconfig module numbering;
1228                          change quick write to not corrupt 24RF08's
1229
12302.6.4 (20020719)
1231  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1232  File doc/vid: New
1233  File include/sensors_vid.h: New
1234  File sensors.conf.eg: Add vt1211, smsc47m1
1235  Library: Add multiple VRM version support for adm1025, w83781d;
1236           fix 'flex scanner jammed' on some systems;
1237           add vt1211, smsc47m1, lm92;
1238           fix access mode checking
1239  Makefiles: For 2.4+ kernels, modules now install in
1240             kernel/drivers/[i2c,sensors] , not misc/ , and
1241             'make install' removes old versions in misc/ .
1242             Use $CFLAGS and $CPPFLAGS if defined.
1243  Module adm1025: Add multiple VID version support
1244  Module ds1307: new
1245  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1246                     reliability improvements
1247  Module i2c-hydra: Flush posted writes
1248  Module i2c-i801: Add support for 82801DB (ICH4)
1249  Module i2c-i810: Flush posted writes
1250  Module i2c-savage4: new
1251  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1252  Module i2c-voodoo3: Flush posted writes
1253  Module ds1307: New
1254  Module lm92: New
1255  Module smbus-arp: new
1256  Module smsc47m1: new
1257  Module via686a: Add support for VT8231 sensors
1258  Module vt1211: new
1259  Module w83781d: Add multiple VID version support; fix temp alarms
1260  Program eeprom: new
1261  Program i2cdump: Add smbus block command specification, add PEC support
1262  Program lm_sensors.init: new
1263  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1264                   pcf8574, pcf8591, smsc47m1, vt1211
1265  Program p4b_smbus: Add support for ICH4
1266  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1267  Program sensord.init: Renamed, was prog/init/sensors
1268  Program sensord: Major update, now requires rrd source;
1269                   not compiled by default
1270  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1271                   (don't display algo. and adap.) option;
1272                   add vt1211, smsc47m1, lm92
1273  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1274                          add 82801DB, LM85; fix perl warnings;
1275                          generate /etc/sysconfig/lm_sensors for
1276                          lm_sensors.init script
1277
12782.6.3 (20020322)
1279  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1280  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1281  File doc/chips/it87: add more temp_type help
1282  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1283                        add adm1021 section; add lm87 AIN[1,2] template;
1284                        swap negative voltage limits for 782d,783s,627hf,
1285                        697hf,it87; add more it87 help; swap neg. voltage
1286                        limits for lm78(-j), lm79, w83781d, as99127f
1287  Library: Add PCF8591, W83697HF, ADM1023 support;
1288           fix w83* fan_min computes;
1289           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1290  Module adm1024: Add MODULE_LICENSE("GPL")
1291  Module bt869: Add s-video out and DVD resolution support
1292  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1293  Module fscscy: implement min/max for voltages and fans
1294  Module i2c-amd756: Add support for AMD768
1295  Module i2c-i810: Add support for 810E
1296  Module i2c-keywest: Big update, sync with kernel 2.4.18
1297  Module i2c-piix4: Check for uninitialized base address
1298  Module i2c-sis5595: Blacklist 645, 735
1299  Module i2c-viapro: Check for uninitialized base address
1300  Module gl518sm: Standardize /proc entries in0-3
1301  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1302               fan -> fan1; fix temp2 limit writes
1303  Module pcf8574: Add support for PCF8574A; /proc interface changed
1304  Module pcf8591: new
1305  Module sis5595: Blacklist 645, 735
1306  Module w83781d: Add W83697HF support; allow force_subclients parameter
1307                  for Tyan 2460
1308  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1309  Program decode-vaio.pl: new
1310  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1311                   add text output
1312  Program init/sensors: New SysV init script
1313  Program mkpatch.pl: Add support for fscscy, add more help entries
1314  Program p4b_smbus: new
1315  Program rrd: Install summ_week.cgi
1316  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1317                   clean up chassis intrusion prints
1318  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1319                          fix Via686a and it87 detection;
1320                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1321                          fix uninitialized values; it87 beats lm78
1322
13232.6.2 (20011118)
1324  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1325  Chip Modules (all): malloc.h -> slab.h
1326  Modules (all): Add MODULE_LICENSE("GPL")
1327  File doc/FAQ: More updates and additions
1328  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1329  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1330           update it87 alarm ID's.
1331  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1332  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1333  Module i2c-amd756: Improve busy handling/printk's
1334  Module i2c-i801: Add 82801CA/CAM support
1335  Module i2c-keywest: Sync with PPC people, it works now
1336  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1337  Module i2c-viapro: Add Via VT8233 support
1338  Module it87: Merge alarm_* /proc entries to alarms
1339  Module sis5595: Fix support for rev B0
1340  Module via686a: Make limit initializations reliable
1341  Module w83781d: Allow init=0 parameter to bypass initialization
1342  Program isadump: Add flat address space (PCI) support
1343  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1344                      fscpos, it87, maxilife, mtp008
1345  Program sensors: Fix w83781d temp precision
1346  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1347                          Fujitsu Poseidon and Scylla,
1348                          Intel 82443MX and 82801CA/CAM detection,
1349                          add ITE 8172G detection (driver in kernel 2.4.10)
1350
13512.6.1 (20010830)
1352  File BUGS: Updated
1353  File doc/FAQ: More updates and additions
1354  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1355  File sensors.conf.eg: Fix/enhance it87 section
1356  Library: ds1621 and it87 updates
1357  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1358  Module i2c-amd756: Add AMD 766 support
1359  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1360  Module i2c-piix4: Add Serverworks CSB5 support
1361  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1362  Module adm1025: Fixed temp2 min/max writes
1363  Module ds1621: Add 12-bit precision mode
1364  Module it87: Enable all alarms, add in8 support, add sensor type selection
1365  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1366                  remove support for module
1367  Module sis5595: Recognize unsupported chips and refuse to load
1368  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1369  Program eepromer: new
1370  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1371                      of sensors.c as a module in kernel
1372  Program sensors: it87 updates; adjust temp. precision for some chips
1373  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1374                          recognize unsupported SiS chips;
1375                          recognize AMD 766 and Serverworks CSB5.
1376
13772.6.0 (20010612)
1378  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1379        If your make fails because it can't find <linux/i2c-proc.h>, you
1380        forgot this step!!!
1381  File doc/FAQ: Many, many updates and additions
1382  File doc/busses/i2c-sis5595: new
1383  File doc/busses/i2c-tsunami: new
1384  File doc/chips/it87: new
1385  File doc/chips/via686a: Claim support for 686b.
1386  File README.thinkpad: new
1387  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1388                        Add lm87, adm9240, ds1780, lm81 templates;
1389                        Enhance help comments in file;
1390                        Add Tyan S2510 dual-MTP008 example;
1391                        Make separate sis5595 section.
1392  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1393  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1394  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1395           Add support for maxilife-nba and amd1024;
1396           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1397  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1398  Chip Modules (all): Change from sensors_* to i2c_* globals
1399                      for new i2c-proc.[ch]
1400  Makefiles: enhance to support Alpha architecture
1401  Module adm1021: Fix lm84 and gl523sm support
1402  Module adm1024: new
1403  Module i2c-i801: Chip detection cleanup
1404  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1405  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1406  Module i2c-tsunami: New
1407  Module i2c-via: Ensure i2c bus is tristated correctly.
1408  Module it87: new driver for IT8705, IT8712, Sis950 chips
1409  Module lm78: Recognize chipid=0x20
1410  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1411  Module mtp008: Fix temp initializations;
1412                 Save BIOS pin configuration of temps and fans;
1413                 Fix sensor type reads/writes and fan min writes;
1414                 Fix spurious invalid sensor type messages
1415  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1416                  used for patched kernel now.
1417                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1418  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1419                  Allow force_addr=0xaddr
1420  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1421  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1422                  reading changes; Add messages for subclient
1423                  registration failure
1424  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1425  Program i2cset: new
1426  Program isadump: fix for Alpha arch. compiles
1427  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1428                      Remove ltc1710; Fix i2c_sis5595 typo;
1429                      Support kernel 2.4.5 makefile change;
1430                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1431  Program sens_update_rrd: new
1432  Program sensord: Add -d (debug) and -p (pid-file) options
1433  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1434                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1435                   Change mtp008 temps from max/min to limit/hyst;
1436                   Add maxilife-nba, adm1024, it87 support.
1437  Program sensors-detect: Recognize lm78 with chipid=0x20;
1438                          Recognize SMSC Victory66 South Bridge;
1439                          Add devfs /dev/i2c/x support;
1440                          Add adm1024, it87xx support; Add thinkpad warning.
1441  Program tellerstats: new
1442
14432.5.5 (20010115)
1444  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1445        you have kernel 2.4.0-prerelease or greater.
1446  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1447  File doc/developers/proc: new
1448  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1449  Library: Add ds1621, mtp008 support
1450  Module adm1021: Add support for adm1021a / adm1023
1451  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1452  Module adm1025: Add support for remote temp; rename /proc entries to
1453                  in[0-5] and temp[1-2]; fix negative temp readings
1454  Module adm9240: Rename /proc entries to in[0-5]
1455  Module ddcmon: allow force and force_ddcmon parameters
1456  Module ds1621: new
1457  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1458  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1459  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1460  Module lm87: cleanup, update voltage calculations
1461  Module mtp008: new
1462  Module pcf8574: change update time to 5 seconds
1463  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1464  Module w83781d: fix beep setting via /proc
1465  Programs editticket, readticket: new
1466  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1467  Program mkpatch.pl: more fixes; now adds many more modules
1468  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1469                   add adm1025 temp2; report temp limits correctly as
1470                   min/max or limit/hysteresis; print message if no
1471                   sensors are found. Removed false errors from lm87 reads.
1472  Program sensors-detect: Add ds1621, mtp008 detection;
1473                          add ServerWorks detection
1474
14752.5.4 (20001012)
1476  Module i2c-viapro: Add support for Via 596B (0x3051)
1477  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1478  Program mkpatch.pl: fixed infinite loop
1479  Program sensors-detect: Detect Via 596B (0x3051)
1480
14812.5.3 (20001008)
1482  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1483  File useful_addresses.html: update
1484  Library: Add lm87 support
1485  Module pcf8574: new
1486  Module i2c-ali1535: new
1487  Module i2c-ali15x3: removed force #ifdef.
1488  Module i2c-i801: support Intel 82801BA (815E chipset)
1489  Module i2c-i801: add i2c block write support, fix smbus block bugs
1490                   (requires i2c 2.5.3 package)
1491  Module i2c-i810: support Intel 82815
1492  Module lm87: new
1493  Module sensors: Fix for kernel 2.4.0-test8
1494                  (remove copy_to_user_ret and put_user_ret)
1495  Module w83781d: limit fan divisors to 8 max. for as99127f
1496  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1497  Program i2cdump: Add smbus block read support
1498  Programs i2cdetect, i2cdump: Improve error reporting
1499  Program sensors: new switch -u (--unknown)
1500  Program sensors-detect: detect Intel 82801BA (815E chipset)
1501  Program sensors-detect: detect Intel 82815
1502  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1503  Program sensors-detect: detect National LM87
1504  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1505  Program sensors-detect: Improve error reporting
1506
15072.5.2 (20000709)
1508  File sensors.conf.eg: Fix lm80 in8 calculation
1509  Module w83781d: W83783S no longer crashes on unloading
1510  Program sensors-detect: more robustness in case of unknown i2c adapters
1511  Program sensors-detect, libsensors: fix eeprom size reporting
1512  Program sensord: more flexibility, support for alarm scanning etc.
1513  Program sensors: support for ignore setting on sensor alarms.
1514  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1515
15162.5.1 (20000618)
1517  Library: Add adm1025 support
1518  Module adm1025: new
1519  Module ddcmon: Fixed bus scan which could hang SMBus
1520  Module i2c-keywest: new
1521  Module maxilife: Add support for Maxilife '99 (NBA)
1522  Module via686a: Enable sensors if not enabled by BIOS
1523  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1524  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1525  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1526  Module w83781d: Fis as99127f fan speed (was 66% too high)
1527  Module w83781d: Improve beep input checking
1528  Program i2cdump: Add Winbond-style bank selection
1529  Program isadump: Add Winbond-style bank selection
1530  Program sensors: Add adm1025 support.
1531  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1532  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1533  File sensors.conf.eg: Add Maxilife '99 entries
1534  File sensors.conf.eg: Remove some as99127f entries.
1535    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1536          won't reinstall it) or else 'sensors -s' will fail.
1537
15382.5.0 (20000312)
1539  Dropped all kernel 2.0 and 2.1 compatibility
1540  Module i2c-i810: new
1541  Module ddcmon: new
1542  Module via686a: new
1543  Module i2c-amd756: fixed region request
1544  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1545  Module w83781d: Don't change pin settings at initialization;
1546                  also fix chip detection.
1547  Library: Support for ddcmon and via686a
1548  Program sensors-detect: Support for ddcmon and via686a
1549  Program sensors: Support for eeprom, ddcmon and via686a
1550
15512.4.5 (20000116)
1552  Introduced DESTDIR installation prefix
1553  Module lm80: fixes, temperature now read and set correctly
1554  Module i2c-voodoo3: driver enhancements
1555  Module w83781d: fixes, AS99127 works much better now
1556  Library: New ignore keyword in config file
1557  Programs: Support for new ignore keyword
1558  Program sensors-detect: Support for MGA detections
1559
15602.4.4 (19991201)
1561  Addition of the alpha release of AMD 756 SMBus host support.
1562  Many fixes and updates to the gl518sm driver
1563  Updates and fixes for device detection
1564
15652.4.0 (19990920)
1566  Too much to list.
1567  i2c and smbus parts are split off to a separate i2c package.
1568  New drivers and other stuff.
1569
15702.3.4 (19990616)
1571  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1572  All: Now compiles against kernel 2.0.x (again ;)
1573  Module gl518sm: some updates and refinements
1574
15752.3.3 (19990603)
1576  All: Now compiles against kernel 2.3.x (x >= 1)
1577  Module i2c-voodoo3: Timing issue fixes
1578  Module bt869: Seems to be functional and relatively well tested
1579  Many modules were modified to be more compatible with the new
1580   Mutex structure in the new experimental kernels.
1581
15822.3.2 (19990507)
1583  Module i2c-hydra: Now compiles on 2.0.x kernels
1584  Module i2c-lm75: Slightly better detection
1585  * New, but not compiled by default:
1586  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1587  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1588
15892.3.1 (19990501)
1590  All: Now compiles on PPC
1591  Module i2c-hydra: NEW
1592  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1593  Module w83781d: Removed deadlock (mutex was not initialized)
1594  Documentation: A few glitches removed
1595  Makefile: default module installation directory is now
1596            /lib/modules/current/extra/misc
1597  Program sensors-detect: PPC Hydra now detected
1598  Program sensors: Now prints complete GL518SM information
1599  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1600
16012.3.0 (19990422)
1602  All: Many, many changes and improvements
1603  All: Many small bugs and problems removed
1604  Modules: New insmod parameters
1605  Modules: Much improved chip detection
1606  Module maxilife: NEW
1607  Module adm1021: MAX1617A now also supported
1608  Module adm9240: DS1780 now also supported
1609  Module w83781d: W83782D and W83783S now also supported
1610  Program sensors-detect: NEW
1611  Library: All chips now supported
1612  Documentation: Very much improved
1613
16142.2.2 (199903??)
1615  Just some minor updates and bug fixes.
1616
16172.2.1 (19990218)
1618  All: Removed compile warnings
1619  Module i2c-dev: Small bug removed if DEBUG=1 was used
1620  Module sis5595: Now compiles for 2.0 kernels
1621  Module adm1021: Detection corrected
1622
16232.2.0 (19990216)
1624  All: Set copyrights to include 1999
1625  All: Small bugfixes
1626  I2C: Upgraded to newest archive of Simon Vogl
1627  Module i2c-dev: NEW
1628  Module i2c-ali15x3: NEW
1629  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1630     directories, and somewhat improved
1631  Module sis5595: NEW
1632  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1633  Library: Support for new chip drivers, several small bugs fixed
1634  Library manual pages: NEW
1635  Program i2cdetect: Moved to detect directory
1636  Program detect.pl: NEW
1637  Program doc-features: NEW
1638  Program sensors: Added man-page
1639  Document BUGS: Added cdrom bug and kernel i2c conflict
1640
16412.1.2 (19990116)
1642  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1643  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1644  Documentation in doc/kernel: NEW
1645
16462.1.1 (19990107)
1647  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1648                     and older
1649  Module gl518sm.o: Miscelaneous bugs and problems solved
1650  Program isadump: NEW
1651
16522.1.0 (19981230)
1653  Library: Completely NEW
1654  Program sensors: NEW
1655  Program grab_busses: NEW
1656  Program decode-dimms: More information
1657  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1658  Module w83781d.o: NEW
1659  Module lm80.o: NEW
1660  Module gl518sm.o: new procfile beep, several small updates
1661  Modules: Now use pin readings, no more scaling within the kernel (use the
1662           library instead)
1663
16642.0.2 (19981214)
1665  Module eeprom.o: NEW
1666  Program decode-dimms: NEW
1667  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1668           2.1.58
1669  Modules: Somewhat less verbose on transfers
1670  Module lm78.o now recognizes and handles lm78-j and lm79
1671
16722.0.1 (1998121?)
1673  Module gl518sm.o updates, to make it actually work
1674  Module lm75.o high/low-byte swapping write bug fixed
1675
16762.0.0 (19981209)
1677  Initial release
Note: See TracBrowser for help on using the browser.