Context Navigation

CHANGES @ 4334

Revision 4334, 78.1 KB (checked in by khali, 6 years ago)
sensors: Do not print adapter errors when -A is used.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`

Line
1	lm_sensors CHANGES file
2	-----------------------
3
4	SVN HEAD
5	Library: Do not skip i2c adapters with only a class device and no
6	physical device. This change is required to survive the
7	planned struct class_dev removal from future 2.6 kernels.
8	Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
9	Man page i2cdetect.8: Scanning range can be restricted
10	Module bmcsensors: Fix debugging messages
11	Module i2c-ali1563: Improve the status messages (2.6 backport)
12	Fix device initialization (2.6 backport)
13	Module i2c-amd8111: Cleanups (2.6 backport)
14	Fix initialization race (2.6 backport)
15	Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
16	Module i2c-piix4: Add ATI SB600 support (2.6 backport)
17	Module i2c-viapro: Add CX700 support (2.6 backport)
18	Module smsc47m1: Add SMSC LPC47M292 support
19	Get rid of a useless semaphore (2.6 backport)
20	Programs i2cdetect, i2cdump, isadump: Flush output in real time
21	Program sensors: Add smsc47m2 support (fans)
22	Fix -A option (hide adapter name) on error
23	Program sensors-detect: Only probe relevant I2C addresses
24	Drop ARP-capable device detection
25	Add Maxim MAX6655/MAX6656 detection
26	(Olexiy Avramchenko)
27	Add Maxim MAX1668, MAX1805, MAX1989 detection
28	Add VIA CX700 detection
29	Drop legacy W83627HF ISA detection
30	Don't bufferize stdout during probes
31	Speed up the LM75 and LM77 detection
32	Clean up the EEPROM detection
33	Add Dallas DS75 detection
34	Add SMSC LPC47M292 detection
35	Add nVidia MCP61 and MCP65 detection
36	Fix ADM1028 detection
37
38
39	2.10.2 (20070115)
40	RPM: Obsolete, removed
41	File doc/fan-divisors: Update
42	File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
43	Library: Add support for the pc87247 driver (fans only)
44	Probe for busses before chips
45	Drop support for algorithm names
46	Add support for coretemp driver
47	Major update/optimization of config-file scanner
48	Add config-file scanner regression tests
49	Add f71872f support
50	Add w83627dhg support (David Holl, #2157)
51	Get the i2c adapter names from classdev.name
52	Add adm1029 support (Corentin Labbe)
53	Man page i2cdetect.8: Describe the output convention
54	Man page sensors.1: Update (option -c) and clean up
55	Module bmcsensors: Fix several warnings
56	Fix fragile structure initialization
57	Module i2c-i801: Add ICH9 support
58	Module p4b_smbus: Add support for the ICH5
59	Module f71805f: Fix the device address decoding (2.6 backport)
60	Module icspll: Delete. It was useless and dangerous.
61	Program decode-dimms.pl: Remove spaces at end of lines
62	Program eepromer: Fix loads of warnings
63	Program i2cdetect: Make the output clearer
64	Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
65	Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
66	without need of recompilation.
67	Programs dump/*: More robust handling of user inputs
68	Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
69	Add support for non-i2c drivers
70	Program fancontrol.pl: Disable debugging by default
71	Add support for non-i2c drivers
72	More tolerant config file parsing
73	Program sensord: Add pc87247 support (fans only)
74	Add vt1211 support (#2150)
75	Add w83627dhg support (David Holl, #2157)
76	Add w83627ehf voltage support (Dave Platt)
77	Add k8temp support (Dave Platt)
78	Program sensors: Add pc87247 support (fans only)
79	Hide error on missing f71805f fan
80	Handle option -c more efficiently
81	Drop option -a (show algorithm names)
82	Add f71872f support
83	Add w83627dhg support (David Holl, #2157)
84	Add adm1029 support (Corentin Labbe)
85	Hide error on missing w83793 temp (Gong Jun)
86	Program sensors-detect: Add SMSC DME1737 detection
87	Add Fintek F71882FG and EPoX EP1308 detection
88	Add Intel Core thermal sensor detection
89	Preallocate memory for I2C_FUNCS ioctl (#2138)
90	Prevent misdetection of MAX6633/MAX6634/MAX6635
91	Add Intel ICH9 detection
92	Add Maxim MAX6648/MAX6692 detection
93	Improve ADM1029 detection
94	Add Andigilog chips detection
95	Add Intel AMB FB-DIMM thermal sensor detection
96	Add ATI SB600 detection
97
98
99	2.10.1 (20060924)
100	File doc/developers/checklist renamed to dev/developers/release_checklist
101	with clarifications and updates for new SVN server.
102	File README.package: Delete.
103	File doc/busses/i2c-piix4: Update (2.6 backport)
104	File doc/developers/sysfs-interface: Update
105	File etc/sensors.conf.eg: Add an smsc47m192 section
106	Comment out all set statements
107	Add an it8716 section
108	Add a w83793 section
109	Adjust the vt1211 section to match the new driver
110	interface
111	Library: Fix device scan when no i2c support is present
112	Add support for W83627EHF voltage inputs and alarms
113	Add support for the smsc47m192 driver
114	Fix all memory leaks (yeah!)
115	Fix no sensors being reported as an error
116	Add support for the IT8716F and IT8718F chips
117	Add support for the W83793 chip (Yuan Mu)
118	Map the 2.6 adm1026's fan8 to fan0
119	Missing sysfs busses and classes are not errors
120	Change vt1211 temp3-7 magnitude from 1 to 3
121	Makefile: Don't grep autoconf.h on user-space targets
122	Fix depmod on non-running kernel version
123	Remove empty include directories on make user_uninstall
124	Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
125	Module i2c-amd756-s4882: Improve static semaphore initialization
126	(2.6 backport)
127	Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
128	Add ICH8 support (2.6 backport)
129	Fix block transaction poll loops (2.6 backport)
130	Remove PCI function check (2.6 backport)
131	Cleanups (2.6 backport)
132	Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
133	Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
134	Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
135	Drop the fix_hstcfg parameter (2.6 backport)
136	Module i2c-viapro: Fix compilation with kernels < 2.4.21
137	Add VT8237A and VT8251
138	Module lm83: Add LM82 support (2.6 backport)
139	Module vt1211: The VT1211 has no in6
140	Rework the voltage and temperature conversions and the
141	temperature input order to match the Linux 2.6 driver
142	Module w83781d: Use real-time alarm registers when possible (2.6 backport)
143	Add specific alarm and beep defines for the W83791D
144	Module w83792d: Fix PWM range (2.6 backport)
145	Program decode-dimms.pl: Decode depending on the memory type
146	Decode the manufacturing date to an ISO8601 date
147	Add the memory size computation and provide brief
148	timing characteritics for SDRAM/DDR/DDR2 memory
149	Add memory size computation for Rambus memory
150	Various output cleanups and fixes
151	Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
152	Program decode-vaio.pl: Detect and skip false positives
153	Program i2cdetect: Add a mode to print adapter functionalities
154	Program i2cdump: Restore bank after bank switching
155	Add new mode W (read word on even register addresses)
156	Program mkpatch: Fix typo breaking f71805f
157	Turn warnings on (-w), and fix them
158	Print a usage message on missing command line parameters
159	Program pwmconfig: Use mktemp instead of tempfile
160	Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
161	Add smsc47m192 support
162	Add abituguru support (Hans de Goede)
163	Fix memory leak when printing an unknown chip
164	Add it8716 and it8718 support
165	Make each it87 fan and fan div optional
166	Print missing w83791d values
167	Add w83793 support (Yuan Mu)
168	The adt7463 may not have in4 (#2119)
169	Hide more vt1211 missing input errors
170	Clearer error messages when no sensors found
171	Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
172	Add ATI IXP200/300/400 SMBus detection
173	Prevent warning on 64-bit PCI addresses
174	Add Fintek F75363SG, F75111R/RG/N, F75121R,
175	F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
176	F75384S/M, F75387SG/RG and F81218D detection
177	Add Winbond W83793R/G and W83627DHG detection
178	Handle the W83791D driver difference between kernels
179	Add nForce4 MCP04, MCP51 and MCP55 detection
180	Add AMD Geode devices detection
181	Add ITE IT8716F and IT8718F detection
182	Add NatSemi/Winbond PC87427 detection
183	Get driver information for busy addresses from
184	sysfs (2.6 only)
185	Drop the ISA IT87xxF detection
186	Check i2c adapter functionalities before probing
187	Add Intel ICH8 SMBus detection
188	Add AMD K8 thermal sensors detection
189	Simplify detection of SiS5595, VIA686 and VT8231
190	Add Analog Devices ADM1033, ADM1034, ADT7462,
191	ADT7466, ADT7470, ADT7473 and ADT7475 detection
192	Check for root user at startup
193	Attempt to be slightly more user-friendly
194	Add VT8237A and VT8251
195	Remove detection of nVidia graphics adapters
196	Use sysfs for PCI device enumeration
197	Add generic PCI SMBus adapter detection
198	Add generic Super-I/O logical device detection
199	Add SMSC LPC47M172/182 detection
200
201
202	2.10.0 (20060214)
203	File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
204	File doc/busses/i2c-viapro: Update (2.6 backport)
205	File doc/chips/via686a: Update (2.6 backport)
206	File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
207	File etc/sensors.conf.eg: Do not set vrm by default
208	File i2c-dev.h: Fix union i2c_smbus_data definition
209	Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
210	Add missing parentheses around macros
211	Drop I2C_FUNC_SMBUS_EMUL
212	Drop I2C_FUNC_SMBUS_*_PEC
213	Drop I2C_SMBUS_*_PEC
214	File sensors_vid.h: Drop default VRM
215	Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
216	This is intentional. Use decode-dimms.pl if you still
217	need your memory SPD data.
218	Library: Big update to use libsysfs. More TODO though.
219	Fix bus matching code for Linux 2.6 (Karsten Petersen)
220	Add f71805f, w83687thf support
221	Add platform drivers support
222	Fix sysctl warnings on x86_64
223	Restore vt1211 temp1
224	Makefile: Compile user-space programs with -Wundef
225	Module i2c-i801: Simplify the hardware PEC code
226	Always set PEC mode explicitly before each transaction
227	Module i2c-i810: Documentation update, PCI IDs cleanup
228	Module i2c-keywest: Remove bus probing code (2.6 backport)
229	Module i2c-nforce2: Remove dead code (2.6 backport)
230	Add the ID of the nForce4 MCP-04 (2.6 backport)
231	Module i2c-via: Remove dead code
232	Module i2c-viapro: Remove dead code
233	Support I2C block read (2.6 backport)
234	Code cleanups (2.6 backport)
235	Improve debug register dump (2.6 backport)
236	Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
237	i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
238	i2c-sis645: Use pci_driver name to request I/O region; do
239	not initialize i2c_adapter name to "unset" (2.6
240	backport)
241	Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
242	(2.6 backport)
243	Module adm9240: Cleanups (2.6 backport)
244	Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
245	Module it87: Minor cleanups
246	Fix fan3_div setting bug (Anton V. Staaf)
247	Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
248	Separate the register read function
249	Add PEC support for the ADM1032
250	Module via686a: Cleanups
251	Module w83627hf: Drop useless initialization step (2.6 backport)
252	Fix in4 for W83627THF and W83637HF (Yuan Mu)
253	Fix alarms (Yuan Mu)
254	Preserve fan min on fan div change (Yuan Mu)
255	Properly handle W83627THF without VID (Yuan Mu)
256	Fix in0 limit settings in "VRM9" mode (Yuan Mu)
257	Add W83687THF support
258	Module w83781d: Drop W83697HF support (Grant Coady)
259	Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
260	Fix fan control mode (PWM/DC) reporting
261	Fix fan div auto-adjust (Yuan Mu)
262	Fix the subclient handling
263	Module w83l785ts: Minor cleanup (2.6 backport)
264	Module vt1211: Restore temp1
265	Modules vt1211, vt8231: Change default VRM to 9.1
266	Program decode-dimms.pl: Add lookup tables for manufacturer names
267	Fix rounding error in PCxxxx speed computation
268	Improve text output
269	Improve speed under Linux 2.6
270	Verify checksum before decoding anything
271	Improve manufacturing location decoding
272	Improve memory type detection
273	Improve part number decoding
274	Program i2cdump: Drop now useless #ifdef tests
275	Fix capability check for continuous byte mode
276	Program i2cget: New
277	Program i2cset: Add PEC support
278	Fix argc check
279	Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
280	Print the correct bus type if bus
281	functionality can be queried
282	Program isadump: Display the real addresses in flat mode
283	Program mkdev.sh: Silently skip already existing nodes
284	Program mkpatch: Include f71805f
285	Program sensord: Do not log algorithm names
286	Drop EEPROM support (Aurelien Jarno)
287	Add W83627EHF, F71805F/FG support
288	Fix PC87365/PC87366 alarms
289	Program sensors: Drop free_the_label
290	Fix compilation with uclibc (no iconv)
291	Add f71805f, w83687thf support
292	Program sensors-detect: Drop algorithm names
293	Do not rely on i2cdetect -l printing algo names
294	Simplify adapter name matching mechanism
295	New address for ADM1032, ADT7461
296	Improve ADT7467, ADT7468 support
297	Fix MAX6659 reported driver
298	Add Fintek F71805F detection
299	Add Analog Devices ADT7476 detection
300	Add Intel 82845G detection
301	Add IT8201R/IT8203R/IT8206R/IT8266R detection
302	Fix udev detection in some corner case
303	Improve DS1621 detection
304	Always prefer ISA access over SMBus access
305
306
307	2.9.2 (20050906)
308	File doc/chips/*: Big update (2.6 backport)
309	Library: Drop ds1780-specific code (now use adm9240)
310	Fix memory leak in sensors_get_label()
311	Support /sys/class/hwmon (Linux 2.6.14+)
312	Limit stack usage in sensors_read_proc_chips()
313	Makefile: Detect 2.6+ kernels and check targets
314	Man page isaset.8: Fix typos
315	Module adm1031: Fix broken kfree() calls
316	Module i2c-ali1563: New (2.6 backport by Winbond)
317	Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
318	Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
319	w83627hf.c: Tag find function __init
320	Module lm93: Fix memory leak
321	Module smsc47m1: Fix PWM enable polarity on read
322	Modules w83627hf, w83781d: Allow setting fan divisor to 128
323	Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
324	Added DDR/DDR2 frequency reporting in convenient
325	form of DDRxxx PCyyyy
326	Program i2cdump: Properly handle short i2c block reads
327	Program fancontrol.pl: Fix compile errors
328	Program mkpatch: Include i2c-ali1563
329	Include w83792d
330	Program pwmconfig: Fix unsafe temporary file use
331	Program rrd: Support 2.6 kernels
332	Program sensord: Add support for w83637hf
333	Support pc87360 (Henrik Brix Andersen)
334	Program sensors: Support the VAIO "VGN" prefix for eeprom
335	Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
336	Advertise the w83792d driver
337	Improve IT8705F and IT8712F detection
338	Merge LM82 and LM83 detection
339	Add W83687THF detection
340
341
342	2.9.1 (20050412)
343	File doc/busses/i2c-nforce2: Update
344	File doc/chips/it87: Update
345	File doc/chips/lm90: Update for adt7461
346	File doc/chips/mic74: New
347	File etc/sensors.conf.eg: New sections for lm92 and w83792d
348	Library: Add support for 2.6 fscpos driver (Stefan Ott)
349	Fix sis5595 in4 (Aurelien Jarno)
350	Add support for 2.6 gl520sm driver (Maarten Deprez)
351	Add support for 2.6 bmcsensors driver (Yani Ioannou)
352	Add support for w83792d (Chunhao Huang/Winbond)
353	Add support for 2.6 adt7461 (James Chapman)
354	Add support for 2.6 lm92
355	Add support for 2.6 vt1211
356	Add preliminary support for 2.6 w83627ehf
357	Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
358	Use -fno-strict-aliasing on all architectures
359	Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
360	Module bmcsensors: Fix compile error
361	Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
362	Module ds1621: Fix detection (Aurelien Jarno)
363	Module eeprom: Discard SPD-centric checksum module parameter
364	Cleanup detection function (backport from Linux 2.6)
365	Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
366	Module i2c-i801: Temporarily disable broken I2C block read
367	Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
368	Gelato)
369	Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
370	Module i2c-viapro: Prevent repeated resets
371	Module it87: Improve Super-I/O detection
372	Limit I2C address range
373	Support VID on the IT8712F
374	Module lm75: Only initialize CMP/INT bit
375	Module lm78: Fix bug with setting negative temperature limits
376	Module lm85: Properly differentiate between ADM1027 and ADT7463
377	Add EMC6D102 support
378	Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
379	Add limited ADT7461 support
380	Module lm93: Fix IN10 (+5V) scaling
381	Module mic74: New
382	Module w83627hf: Support secondary Super-I/O address
383	Enable temp2 and temp3 if they are disabled
384	Module w83781d: Revert AS99127F temp2 and temp3 computation change
385	Skip final initialization step for AS99127F chips
386	Module w83792d: New (Chunhao Huang/Winbond)
387	Program ddcmon: New; user-space replacement for the ddcmon driver
388	Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
389	Program isadump: Handle Super-I/O keys
390	Program lm_sensors.init: Cleanups (Axel Thimm)
391	Program mkdev.sh: Add basic command-line interface
392	Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
393	Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
394	Don't complain about read-only enable files (lm85)
395	Fix handling of alternate config file name
396	Program sensord: Fix erroneous error message (Aurelien Jarno)
397	Support sis5595 in4 (Aurelien Jarno)
398	Support w83627thf
399	Support the separate it8712 prefix (Aurelien Jarno)
400	Program sensors: Display sis5595 in4 (Aurelien Jarno)
401	No errors on missing pc87360 fans
402	Add gl520sm support (Maarten Deprez)
403	Improve vt1211 error/ignore handling (Michael Carland)
404	Support w83792d, w83627ehf
405	Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
406	Improve IT8705F and IT8712F detection
407	Improve udev detection
408	Fix DS1621 detection
409	Add W83627EHF detection
410	Add ATI SMBus detection
411	Add VT1211 alias detection
412	Warn if chip modules not found
413	Add i2c-ipmi to list if bmcsensors is on it
414	Add PC87591 detection
415	Search for correct udev db file name
416	Add nForce3 250Gb and nForce4 detection
417
418
419	2.9.0 (20041228)
420	NOTE: Requires i2c-2.9.0 or newer!
421	File README.thinkpad: Update
422	File doc/chips/it87: Cleanups
423	File doc/chips/lm63: New
424	File etc/sensors.conf.eg: Set via686a voltage limits
425	File kernel/chips/Module.mk: Resync module list with mkpatch
426	File kernel/include/sensors_compat.h: Define __devexit_p if missing
427	(kernels 2.4.16 and older)
428	Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
429	and dec_use removed in release 2.8.0
430	Modules (all chip drivers): Remove owner from i2c_driver; pass
431	controlling_mod to i2c_register_entry() again
432	Module bmcsensors: Support function 1/x
433	Module i2c-amd756: Display the real bus name
434	Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
435	Module i2c-i801: Support i2c block read (ICH5 and higher)
436	Add PEC support for ICH6
437	Add support for ICH7
438	Module i2c-ipmb: Remove from build since it doesn't work
439	Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
440	Module icspll: Fix compilation
441	Module lm63: New driver for the National Semiconductor LM63
442	Module lm83: Use signed types for temperatures
443	Check limits on register writes
444	Module lm87: Round voltages properly
445	Retry on read errors (David Knierim)
446	Less agressive init (no reset)
447	Module lm90: Use signed types for temperatures
448	Check limits on register writes
449	Module lm93: Added module parameter for VID pin input thresholds.
450	Fix typo in dynamic VID alarms
451	Adds a couple log messages for failed transactions (David
452	Knierim)
453	Fix compilation breaking C99-ism (Axel Thimm)
454	Fix block read retries
455	Module pc87360: Support secondary Super-I/O address
456	Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
457	Library: Add lm63 support
458	Add lpc47b397 support
459	Programs *.init: Rename lockfile to match file name
460	Programs i2cset, isaset: Written byte/word can be masked
461	Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
462	Program mkpatch: Include i2c-amd756-s4882
463	Program pwmconfig: Handle new (well, back to old) pwm files names for
464	Linux 2.6.10 and up
465	Program sensord: Do not scale load average (Aurelien Jarno)
466	Program sensors: Add lm63, lpc47b397 support
467	Support DDR2 memory module EEPROMs (Rudolf Marek)
468	Support only one location for the default configuration file
469	Display the default configuration file location in --help
470	Simplify the configuration file opening code
471	Program sensors-detect: Improve LM63 detection
472	Discard IBM Thinkpad detection code
473	Add PCA9556, LPC47B397, ICH7 detection
474	Fix W83792D detection, add W83791SD detection
475
476
477	2.8.8 (20041007)
478	File doc/donations: Update
479	File doc/lm_sensors-FAQ.texi: Add 4.6.1
480	Update 4.7
481	File doc/chips/gl518sm: Update "iterate" info
482	File doc/chips/it87: Discard outdated module parameters
483	File doc/chips/lm75: LM77 is not supported
484	File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
485	File doc/chips/lm93: New
486	File doc/chips/w83l785ts: Improvements
487	File etc/sensors.conf.eg: Fix it87 lines order
488	Update lm87 section
489	File kernel/include/sensors_vid.h: Support VRM 10.0
490	Library: Support 2.6 adm1025
491	Preliminary support for 2.6 lm87
492	Support 2.6 adm9240
493	Allow an alternative sysfs file name for chip features (2.6)
494	Fix lm83 critical limits (2.6)
495	Add lm93 support
496	Prevent some procfs errors from being silently ignored
497	Makefiles: Implement user_uninstall (Rudolf Marek)
498	Spoof LOGNAME and HOSTNAME when making html man pages
499	Module adm1025: Refine detection
500	Update limit registers again (revert of 2.8.1)
501	Init high limits if they read 0
502	Fix conversions
503	Module lm75: Refine detection
504	Module lm78: Fix init
505	Module lm83: Default to kind lm83 if forced.
506	Fix temperature macros.
507	Module lm90: Add LM86, MAX6657 and MAX6658 support
508	Module lm93: New
509	Module mtp008: Fix the setting of limits on temp2
510	Module pca9540: Refine detection
511	Module pc87360: Change voltage/thermistor magnitude from 2 to 3
512	Support VID
513	Fix fan_div file when fan count is less than 3
514	Additional init and debug
515	Module smsc47m1: Fix pwm_enable being inverted
516	Module w83627hf: Add alternate VCORE/in0 calculation method
517	Remove reset of chip by driver on initialization
518	Module w83781d: Fix default VRM for w83791d
519	Module w83l785ts: Implement read error handling (backport from 2.6)
520	Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
521	Wait for user input to continue (as opposed to 5 sec
522	delay), can be skipped with -y
523	Various cleanups and code refactoring
524	Update manual pages
525	Program fancontrol.init: New (Dean Takemori)
526	Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
527	Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
528	(Giuseppe Della Bianca)
529	Program mkdev.sh: Detect devfs and refuse to run
530	Use mknod's mode instead of chmod
531	Program mkpatch: Include xeontemp and pc87360
532	Program sensors: Rework adm1025 support
533	Display pc87365/pc87366 VID
534	Improve smsc47m1 support
535	Hide 2.6 adm1027 alarm_mask being missing
536	Print VRM version for all supported chips
537	Program sensors-detect: Support LM93, LM77, LM63
538	Support PC8739x Super-I/O family (no sensors)
539	Fix PCA9540 support
540	Refine ADM1025/ADM1025A detection
541	Refine LM75 detection
542	Ignore missing /proc/modules (Andras Bali)
543	Script-wide Perl cleanups
544	Support udev
545	Support W83792D, LM96000
546
547
548	2.8.7 (20040611)
549	File README.thinkpad: Update 24RF08 status
550	File doc/fan-divisors: More info on accuracy
551	File doc/lm_sensors-FAQ.texi: Update 4.27
552	File doc/chips/adm1031: New
553	File doc/chips/max1619: New
554	File doc/chips/pc87360-fan: Renamed to pc87360
555	File doc/chips/pc87360: Big update
556	File doc/chips/w83781d: Update AS99127F documentation
557	File etc/sensors.conf.eg: Add comments about BP6 voltages
558	Add comment on Asus A7V8X-X VCore
559	Misc fixes to lm80 section
560	Update via686a section
561	New lm99 section
562	Add section for LM85-like chips
563	Preliminary pc87366 section
564	Add comment on GL520SM application modes
565	Document beep_enable (Aurelien Jarno)
566	Preliminary max1619 section
567	Preliminary adm1030 and adm1031 sections
568	Library: Fix 2.6 VRM
569	Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
570	Fully support the PC87360 family
571	Support the lm99
572	Add version and date strings
573	Support 2.6 max1619
574	Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
575	Man page i2cdetect.8: document new command line flags
576	Man page i2cdump.8: More details on how i2cdump can write to a chip
577	Modules (all chip drivers): Rework memory allocation scheme.
578	Module adm1031: New (Alexandre d'Alton)
579	Module bmcsensors: Fix oops by creating thread for initialization
580	Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
581	Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
582	asb100.c, lm92.c: Use swab16
583	Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
584	Module gl520sm: Less agressive initialization process
585	Fix temp1 limits being unsettable in application
586	Ensure that temp2 and in4 are not used at the same time
587	Module i2c-i801: Support 6300ESB and ICH6
588	Module i2c-piix4: Don't blacklist IBM with Serverworks chip
589	Module i2c-sis645: Add support for SiS655
590	Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
591	Module lm90: Support LM99 and LM89
592	Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
593	Get rid of useless i2c_probe call
594	Module max1619: New (Alexey Fisher)
595	Module p4b_smbus: Add support for mobile versions of the 82801
596	(Axel Thimm)
597	Module pc87360-fan: Renamed to pc87360
598	Module pc87360: Also support PC87365 and PC87366
599	Add write support
600	Correctly set the chip name depending on the type
601	Add voltage and temperature support
602	Fix fan speed computation
603	Retrieve fans configuration from Super-I/O space
604	Export pwm_enable (read-only)
605	Honor pwm invert bits
606	Clear fan alarms after we read them
607	Do not read fan data when monitoring is disabled
608	Do not include SENSORS_INSMOD stuff
609	New module parameter: init
610	Fan clock dividers change automatically
611	Add thermistor dupport
612	Module smsc47m1: Lock on reads and writes
613	Various PWM fixes
614	Module thmc50: Fix address range
615	Module via686a: Fix voltage roundings
616	Simplify temperature conversions
617	Module w83781d: Drop PWM support for as99127f
618	Invert AS99127F beep bits in driver rather than user-space
619	Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
620	Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
621	Program fancontrol.pl: New
622	Program i2cdetect: Adapt probing method to address
623	Add -q and -r flags to force probing methods
624	Allow probing range selection
625	Program isadump: Major improvements
626	Program isaset: New
627	Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
628	module
629	Include i2c-nforce2
630	Program sensord: New --rrd-no-average parameter
631	Syncronize time slots with rrd
632	Fix W83781D temp3 alarm (Aurelien Jarno)
633	Add ASB100 support (Andrew May)
634	Program sensors: Fully support the PC87360 family
635	Fix lm80 temperature alarms
636	Support the lm99
637	Do not invert AS99127F beep bits anymore
638	Fix W83781D temp3 alarm (Aurelien Jarno)
639	Print library version string
640	Program sensors-detect: Rework Super I/O detection
641	Support SiS655/SiS96x
642	Support ADT7461 and ADT7467
643	Better support for ADM1027, ADT7460 and ADT7463
644	Explicitly support ADM1028
645	Scan all logical devices of PC87365 and PC87366
646	Detect LM92, LM76, MAX6633, MAX6634, MAX6635
647	Detect eeproms with software write protect (not
648	enabled by default)
649	Support ALi 1563 (2.6 only)
650	Drop LTC1710 support
651	Use byte reads for probing on ranges 0x30-0x37 and
652	0x50-0x5F
653	Improve LM89 and LM99 support
654	Support GeForce FX 5900 video cards
655	Fix devfs misdetection (Aurelien Jarno)
656	Detect 6300ESB, ICH6
657	Fix double detection of ISA chips
658	Support MAX1619
659	Support PC87373 Super-I/O
660	Fix unknown adapters appearing multiple times
661	Refine MAX6650/MAX6651 detection
662
663
664	2.8.6 (20040405)
665	File README.thinkpad: Update status
666	File doc/chips/pca9540: New
667	File doc/chips/pc87360-fan: New
668	File etc/sensors.conf.eg: Update pcf8591 default configuration
669	Library: Switch to new sysfs naming standard
670	Fix gcc 3.3 warnings (Philipp Thomas)
671	Support 2.6 ds1621 and pcf8591
672	Change pcf8591 magnitudes
673	Support pc87360-fan
674	Makefile: Install shared library 755
675	Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
676	Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
677	Modules ds1621, pcf8591: Check for capabilities before using them
678	(Aurelien Jarno)
679	Modules pcf8574, pcf8591: Cleanups
680	Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
681	Module adm1021: Better detection and initialization
682	Module pca9540: New driver for the Philips PCA9540
683	Module pc87360-fan: New driver for the National Semiconductor PC87360,
684	PC87363 and PC87364 Super I/O chips
685	Module smsc47m1: Support the LPC47B27x
686	Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
687	Program i2cdetect: Skip special addresses by default
688	Program sensord: Prevent null pointer dereference (Tim Toohey)
689	Program sensors: Print the degree symbol in the terminal's current locale
690	(Aurelien Jarno)
691	Update pcf8591 print to support 2.6 driver
692	Support pc87360-fan
693	Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
694	Improved SiS chips support
695	Add a white list of IBM systems
696	Drop support of undetectable adapters
697	Fix smart battery detection
698	Add smart battery charger and manager detection
699	Rework adm1021 and clones detection
700	The PC87360, PC87363 and PC87364 Super I/O chips
701	now have a (preliminary) driver
702	Rework Super I/O detection
703	Better support of devfs
704	Program sensors-detect-stat.pl: New
705
706
707	2.8.5 (20040305)
708	File doc/chips/SUMMARY: Update
709	File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
710	Makefiles hotplug and rrd: Remove -o and -g arguments to install
711	Module bmcsensors: Increase max SDRs to 100
712	Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
713	Module i2c-amd756: Don't register driver to avoid driver conflicts.
714	(Daniel Rune Jensen)
715	Module it87: Better temperature sensor types handling (Takeru Komoriya)
716	Fix reset=1 (Takeru Komoriya)
717	Module lm80: Code cleanups
718	Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
719	Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
720	Module w83627hf: Add w83637hf support
721	Fix exported name
722	Fix PWM in w83627thf
723	Preserve other bits when forcing temp2/3 to comparator mode
724	Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
725	Remove asb100 support
726	Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
727	Define driver ID if i2c-id.h doesn't have it yet.
728	Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
729	Backport oops fix from Linux 2.6.
730	Modules (all chips): Get rid of useless headers
731	Program decode-edid.pl: Add sysfs support
732	Program sensors: Add w83637hf support
733	Add support for Shuttle Ethernet EEPROMs
734	Drop 2.6 subclient detection
735	Program sensors-detect: Add heuristics to the LM80 detection function
736	Add support for W83L785R, improve W83L784R/AR
737	Add GeForce FX 5600 as supported by rivatv
738	More Super IO chips, better handling
739	Library: Update to match renames in fscher
740	Reverse temporary changes to w83l785ts mappings
741	Fix vt1211 and vt8231 uch_config not being writable
742	Add 2.6 lm80 support
743	Add w83637hf support
744	Remove in6 and temp1 from vt1211 and vt8231
745	Add support for Shuttle Ethernet EEPROMs
746	Remove unused as99127f features
747
748
749	2.8.4 (20040207)
750	File doc/lm_sensors-FAQ.texi: Update 4.20.
751	File doc/chips/it87: Change hyst to low
752	File doc/chips/w83l785ts: New
753	File etc/sensors.conf.eg: Change it87 hyst to low
754	Fix w83697hf supposed to have temp3
755	Limits initialization for adm1025/ne1619
756	Handle fscher voltage conversions
757	Add Tyan Trinity S2495 KT400 setup (Eric
758	Schumann)
759	Fix fscher fan labels (Reinhard Nissl)
760	Library: Better 2.6 eeprom support
761	Change it87 hyst to low
762	Add 2.6 gl518sm, fscher support
763	Fix 2.6 negative voltages handling
764	Temporary fix to w83l785ts mappings
765	Module adm1025: Separate prefix for NE1619
766	Module adm1026: Remove use of temporary ID
767	Define addresses as a range
768	Module bmcsensors: Fix reservations
769	Module fscher: Externalize voltage conversions
770	Module eeprom: Remove memtype
771	Module i2c-piix4: Fix resource release error
772	Various cleanups
773	Program decode-vaio.pl: Add sysfs support
774	Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
775	Drop linux 2.2 support
776	Add w83627hf
777	Program sensors: Do not show algorithm by default
778	Cleanup temperature unit display code
779	Cleanup label spacing code
780	Fix output to UTF-8 terms (Marcel Sebek)
781	Simplify gl518sm print
782	Do not ignore errors in FSC chips prints
783	Fix w83l785ts print
784	Cleanup FSC chips prints
785	Program sensors-detect: Fix PATH issues
786	Correctly point to the fscher driver
787
788
789	2.8.3 (20040115)
790	File lm_sensors.spec: Update
791	Library: Add 2.6 eeprom, lm90 support
792	Fix 2.6 temp_hystX for 2.6.1-rc1 and later
793	Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
794	Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
795	Module i2c-amd756: Fix byte writes
796	Module i2c-tsunami: Cleanups (Daniel Nilsson)
797	Module it87: Fix sg_tlx writes; fix sensor type reporting;
798	add 8712 Super I/O detection;
799	remove initialization of temp_type and fan_ctl;
800	remove init and temp_type module parameters
801	Module lm90: Handle hysteresis differently
802	Module smartbatt: Fix detection, magnitudes, temp
803	Module w83781d: Fix negative voltages
804	Module w83l785ts: New
805	Program eeprog: Make 8 bit mode the default
806	Program fancontrol: Improvements, fixes, support 2.6 kernels
807	Program mkpatch: Add lm75.h
808	Program pwmconfig: Improvements, fixes, support 2.6 kernels
809	Program sensors: Add ASB100 support
810	Program sensors-detect: Add 8712 Super I/O detection;
811	add W83L785TS detection
812
813
814	2.8.2 (20031211)
815	IMPORTANT: Limit initialization removed from all chip drivers!
816	If you didn't run 'sensors -s' in the past you may need to now!
817	File sensors.conf.eg: Change lm75 scaling back to 1;
818	Add example for asb100
819	Library: Fix bmcsensors scaling, increase number of sensors;
820	Add w83627thf support; Advance version to 3.0.0;
821	Add hermes, ADM1032, ASB100 support;
822	Add it87 sensor type support;
823	Add sysfs support for kernel 2.6;
824	Fix memory leaks
825	Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
826	Fail if no kernel .config file exists;
827	Don't build module dependencies for user and user_install
828	Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
829	it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
830	smsc47m1, thmc50, via686a, w83627hf, w83781d:
831	Remove initialization of limits by driver.
832	Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
833	Modules (chip): Init cleanups
834	Module asb100: New
835	Module bmcsensors: Fix voltage scaling, voltage and fan limits
836	Modules ddcmon, eeprom: Add failure printks
837	Module fscher: New (Fujitsu-Siemens Hermes driver)
838	Module i2c-amd756: Fix AMD8111 support
839	Module i2c-amd8111: Fix byte writes
840	Module i2c-nforce2: Fix byte writes
841	Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
842	Module i2c-sis630: Sync with 2.6.0-X driver version
843	Module i2c-viapro: Add support for Via 8237
844	Module it87: Add pwm and "smart guardian" support;
845	add it87 sensor type support
846	Module lm75: Fix negative voltages
847	Module lm90: Add ADM1032 support
848	Module w83781d: Fix 791d and 627hf detection
849	Module w83627hf: Add VID support
850	Program dmidecode: Remove (sensors-detect doesn't need it anymore)
851	Program eeprog: New
852	Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
853	support sysfs for i2c bus search
854	Program i2cdetect: Add -l option to list busses
855	Program i2cdump: Add 'c' mode for consective address reads
856	Program mkpatch: Cleanups
857	Program pwmconfig: Handle multiple fans controlled by a single pwm
858	Program sensord: Remove ddcmon support
859	Program sensors: Add ADM1032 support; add messages for sysfs
860	Program sensors-detect: Prefer Super I/O drivers;
861	Fix W83627HF and W83791D detection; detect CSB6;
862	Detect ADM1029, ADM1030, ADM1031;
863	Detect W83637HF, W83697UF;
864	Add it87 sensor type support; add sysfs support
865	Reduce lm80 misdetects; remove PCFxxxx "detection"
866	Detect VT8237 (KT600)
867	Use VPD instead of DMI+ACPI for Thinkpad detection
868	Suggest new asb100 driver instead of w83781d
869
870
871	2.8.1 (20031005)
872	NOTE: Requires i2c-2.8.1 or newer!
873	File sensors.conf.eg: Improved adm1025 section
874	Default temp labels for as99127f
875	Improved lm83 section
876	Better support for Asus A7V8X-X
877	File doc/chips/SUMMARY: Add SMSC manufacturer ID
878	File doc/chips/adm1025: Add decent documentation (almost new)
879	File doc/chips/lm83: Known motherboards list update, misc updates
880	Library: Change adm1025 names (hyst/over become low/high)
881	Swap adm1025 temp1 and temp2 to match the driver's order
882	Advance version to 2.0.1
883	Update lm83 support
884	Add support for lm90, xeontemp, max6650
885	Add separate messages for read and write errors
886	Add missing message for parse error
887	Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
888	Modules (various): Fix includes for compilation on Alpha
889	Use the new i2c_delay function instead of the various
890	do_pause functions
891	Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
892	Module i2c-nforce2: Cleanups
893	Module i2c-i810: Use readl/writel for portable access to PCI memory
894	Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
895	Module i2c-savage4: Use readl/writel for portable access to PCI memory
896	Module i2c-sis630: Fix detection
897	Add block data read/write support
898	Module i2c-sis645: Detection method change/bugfix
899	Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
900	Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
901	Module adm1025: Major driver update
902	Add support for Philips NE1619
903	Simplify the driver a lot (unified voltages, unified
904	temperatures and much more)
905	Fix default voltage limits
906	Change default temperature limits
907	Swap remote and local temperatures to match the internal
908	registers order (make the code unification possible)
909	Export remote diode fault through alarms
910	Module ddcmon: Major update
911	Add half a dozen new features
912	Add checksum parameter (same as for the eeprom module)
913	Fix monitor limits
914	Module eeprom: Ignore Sony Vaio EEPROMs with a password set
915	Module lm78: Fix a fan_div/fan_min bug
916	Module lm83: Add t_crit and alarms support
917	Module lm90: New
918	Module max6650: New
919	Module saa1064: New
920	Module smsc47m1: Add support for 47M142
921	Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
922	enhance w83627thf support
923	Module w83781d: Enhance chip detection; clean up error returns;
924	fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
925	Module xeontemp: New
926	Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
927	Mark Rambus as unsupported
928	Program decode-edid.pl: New
929	Interfaces between our eeprom module and
930	parse-edid from the read-edid project
931	Program p4b_smbus: Fix SMP compilation
932	Program sensord: Add support for IT87 (Mike Black)
933	Change ADM1025 support to match the changes made to
934	the library
935	Program sensors: Rewrite and enhance EEPROM support
936	Change LM83 and ADM1025 support to match the changes
937	made to the library
938	Add DRDRAM support to print_eeprom
939	Exit(1) on /proc write failure (Malte Starostik)
940	Add LM90, MAX6650 support
941	Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
942	Add support for LM82, LM86, LM89
943	Improved W83781D family detection
944	Add support for AS19927F rev.2, ASB100 Bach
945	Add support for Asus Mozart-2 (3 types)
946	Add support for NE1619
947	Add support for FSC Hermes
948	Make sure /sbin is in the user's path
949	Fix EEPROM detection
950	Automatic module.conf and /dev/i2c* detection
951	Improve LM82 and LM83 detection
952	Handle "to-be-written" cleanly
953	Add detection for 47M14x Super I/O
954	Handle the one-address-many-chips-same-driver
955	case
956
957
958	2.8.0 (20030714)
959	NOTE: Requires i2c-2.8.0 or newer!!!
960	Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
961	2.4.13 or later required for mkpatch.
962	File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
963	i2c package
964	File doc/chips/fscscy: Add watchdog documentation
965	File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
966	File sensors.h: Now automatically generated
967	Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
968	add adm1026, lm83, lm85, w83791d support;
969	Advance version to 2.0.0
970	Makefiles: Generate warnings if new library won't be found by ld.so;
971	Modules now install in kernel/drivers/i2c/[busses,chips];
972	Ensure that headers in /usr/local/include are used first;
973	Don't use /usr/include headers for modules;
974	Handle multiple UTS_RELEASE definitions in linux/version.h;
975	Automatically generate kernel/include/sensors.h;
976	Remove old gzipped modules; remove old misc directory if empty;
977	Remove pre-2.4 installation method;
978	-Wall now the default;
979	Add new targets user, user_install, and help;
980	Run depmod after module installation
981	Modules (all): Cleanups including
982	- Add #include <i2c-proc.h>
983	- C99 initializers
984	- Remove #ifdef MODULE
985	- Remove #ifndef THIS_MODULE
986	- Remove #ifndef MODULE_LICENSE
987	- Remove other 2.1/2.2 #ifdefs
988	- Remove #include "sensors.h", copy SYSCTL defs to module
989	- Remove excess #includes
990	- Remove argument in i2c_register_entry()
991	- Remove dummy xxx_command() definition
992	- Remove EXPORT_NO_SYMBOLS
993	- Remove init_MUTEX #define
994	- Remove xxx_inc_use() and xxx_dec_use() functions; modules
995	no longer adjust their own refcounts
996	- Use module_init() and module_exit()
997	- Update to new i2c_driver struct definition
998	Modules (bus PCI): Convert to PCI-module-style initialization
999	Modules (several): Add support for AMD Opteron VRM (VID) encoding
1000	Module adm1021: Set alarm on failed reads and report old value;
1001	merge changes from kernel 2.5.54
1002	Module adm1026: New
1003	Module bmcsensors: Fix compile when DEBUG=1
1004	Modules ddcmon, eeprom: Use i2c block reads if possible;
1005	better error handling
1006	Module ds1307: Add to Makefile
1007	Module gl520sm: Fix temperature over/hyst writes
1008	Module lm75: merge changes from kernel 2.5.54
1009	Module lm83: New
1010	Module lm85: New
1011	Module i2c-ali1535: Check for invalid transaction
1012	Module i2c-ali15x3: Check for invalid transaction
1013	Module i2c-amd756: merge changes from kernel 2.5.54;
1014	check for invalid transaction
1015	Module i2c-amd8111: merge changes from kernel 2.5.54
1016	Module i2c-i801: Add support for 82801EB (ICH5)
1017	Module i2c-i810: Fix for some chips
1018	Module i2c-nforce2: New
1019	Module i2c-piix4: Check for invalid transaction
1020	Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1021	Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1022	north bridges; SiS962 and SiS963 south bridges
1023	Module i2c-viapro: Check for invalid transaction
1024	Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1025	pwm and pwm enable support; update docs
1026	Module smbus-arp: Check adapter for HW or SW PEC support;
1027	add reset option
1028	Module w83781d: Add support for w83791d
1029	Module w83627hf: New
1030	Program decode-dimms.pl: Recognize DDR and Rambus
1031	Program eeprom: Fix writes for small eeproms
1032	Program eeprom, eepromer: Use local i2c-dev.h for build
1033	Program fancontrol: New
1034	Program lm_sensors.init: Call sensors -s in start()
1035	Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1036	Add adm1026,lm85 support;
1037	Remove sensors.c file; add sensors_compat.h;
1038	Remove patches to i2c-core.c and drivers/char/mem.c;
1039	Now works only for kernels 2.4.13 or later
1040	Program p4b_smbus: Fix 'make install';
1041	Install in same place as other modules;
1042	Clear correct bits in config word
1043	Program pwmconfig: New
1044	Program sensors: add adm1026, lm85, w83791d support
1045	Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1046	w83627hf, w83627thf, w83697hf);
1047	Add support for SiS651, SiS961, SiS745, SiS746;
1048	Support dmidecode 2.0 and later;
1049	Fix "C" format error;
1050	Add support for adm1026, 82801EB (ICH5), W83791D;
1051	Add support for w83l785ts, nForce2;
1052	Fix UTF-8 incompatibility;
1053	Better support for lm75;
1054	Add support for lm83
1055
1056	2.7.0 (20021208)
1057	NOTE: Requires i2c-2.7.0 or newer.
1058	File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1059	File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1060	File doc/busses/i2c-sis645: Add license
1061	File doc/chips/lm92: Add license, features
1062	File doc/chips/maxilife: Add license, parameters, features
1063	File doc/chips/smartbatt: Complete rewrite
1064	File doc/chips/vt8231: Add license, parameters
1065	File sensors.conf.eg: Add section for lm75; complete the lm78 section
1066	Library: Add support for MC1066; add multiple VRM version support for lm87;
1067	enhance adm1023 support; initial support for Sony Vaio eeprom;
1068	add support for bmcsensors; add hacks for additional dummy drivers
1069	Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1070	add flags for x86_64 compiles
1071	Module adm1021: Add support for MC1066
1072	Module bmcsensors: New
1073	Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1074	kernel 2.5.43; fix 2.2 kernel compiles
1075	Module gl518sm: Iterate allowed only for rev 0x00
1076	Module i2c-amd756: Configure base address for nForce support;
1077	check for uninitialized base address;
1078	add support for amd8111 (SMBus 1.0)
1079	Module i2c-amd8111: New (SMBus 2.0)
1080	Module i2c-ipmb: New
1081	Module i2c-ipmi: New
1082	Module i2c-keywest: Sync with kernel 2.4.20
1083	Module i2c-sis630: Add support for SiS730
1084	Module i2c-sis645: Improve support for SiS645/961;
1085	add support for SiS645DX/961 and SiS735;
1086	fix 2.2 kernel compiles
1087	Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1088	Module lm87: Add multiple VRM version support
1089	Module vt1211: Fix inx limits and alarms; fix in0
1090	Module vt8231: Fix inx limits and alarms; fix in0
1091	Module w83781d: Fix in0/in1 initialization
1092	Module smartbatt: New
1093	Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1094	Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1095	stop decoding on checksum error
1096	Program dmidecode: Fix read bug; upgrade to version 1.8
1097	Program doc-insmod: Complete rewrite; fix author output
1098	Program doc-features: Complete rewrite; handle missing sysctl entries;
1099	handle unknown prefix with suggestion
1100	Program lm_sensors.init: Remove spaces bug; add green/red output
1101	Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1102	Program rrd: Add sanity limits to newly-created RRD.
1103	Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1104	Program sensors: Add support for MC1066, Rambus Rimms;
1105	fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1106	initial support for Sony Vaio eeprom
1107	Program sensors-detect: Add support for MC1066, smart battery, 8235,
1108	IPMI, AMD8111; add help if no sensors found;
1109	add ACPI method for IBM system detection;
1110	work with old Perl versions again;
1111	initial support for Sony Vaio eeprom
1112
1113	2.6.5 (20020915)
1114	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1115	File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1116	Library: Fix fan3_div writes for w8378* and it87; add vt8231
1117	Module dmi_scan: new
1118	Module ds1621: Fix enable/disable
1119	Module eeprom: Do not corrupt 24RF08's when checksum=1
1120	Module i2c-i801: Check for uninitialized base address;
1121	enable if not enabled
1122	Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1123	Module i2c-sis630: new
1124	Module i2c-sis645: new
1125	Module lm92: Fix in-kernel initialization
1126	Module via686a: Remove VT8231 support
1127	Module vt8231: new
1128	Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1129	Program dmidecode: new
1130	Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1131	Program mkpatch: Add Config.in entries for, lm92,
1132	pcf8574, pcf8591, smsc47m1, vt1211;
1133	add dmi_scan
1134	Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1135	Program lm_sensors.init: fix stop()
1136	Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1137	add support for logging loadavg in RRD;
1138	fix down-converting raw labels for RRD;
1139	update chip support, still behind sensors
1140	Program sensors: Add /usr/local/etc to config file path;
1141	fix -c and -u flags; add vt8231
1142	Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1143	refuse to run on IBM systems;
1144	fix sysconfig module numbering;
1145	change quick write to not corrupt 24RF08's
1146
1147	2.6.4 (20020719)
1148	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1149	File doc/vid: New
1150	File include/sensors_vid.h: New
1151	File sensors.conf.eg: Add vt1211, smsc47m1
1152	Library: Add multiple VRM version support for adm1025, w83781d;
1153	fix 'flex scanner jammed' on some systems;
1154	add vt1211, smsc47m1, lm92;
1155	fix access mode checking
1156	Makefiles: For 2.4+ kernels, modules now install in
1157	kernel/drivers/[i2c,sensors] , not misc/ , and
1158	'make install' removes old versions in misc/ .
1159	Use $CFLAGS and $CPPFLAGS if defined.
1160	Module adm1025: Add multiple VID version support
1161	Module ds1307: new
1162	Module i2c-amd756: Add nVidia nForce support; fix block read length;
1163	reliability improvements
1164	Module i2c-hydra: Flush posted writes
1165	Module i2c-i801: Add support for 82801DB (ICH4)
1166	Module i2c-i810: Flush posted writes
1167	Module i2c-savage4: new
1168	Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1169	Module i2c-voodoo3: Flush posted writes
1170	Module ds1307: New
1171	Module lm92: New
1172	Module smbus-arp: new
1173	Module smsc47m1: new
1174	Module via686a: Add support for VT8231 sensors
1175	Module vt1211: new
1176	Module w83781d: Add multiple VID version support; fix temp alarms
1177	Program eeprom: new
1178	Program i2cdump: Add smbus block command specification, add PEC support
1179	Program lm_sensors.init: new
1180	Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1181	pcf8574, pcf8591, smsc47m1, vt1211
1182	Program p4b_smbus: Add support for ICH4
1183	Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1184	Program sensord.init: Renamed, was prog/init/sensors
1185	Program sensord: Major update, now requires rrd source;
1186	not compiled by default
1187	Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1188	(don't display algo. and adap.) option;
1189	add vt1211, smsc47m1, lm92
1190	Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1191	add 82801DB, LM85; fix perl warnings;
1192	generate /etc/sysconfig/lm_sensors for
1193	lm_sensors.init script
1194
1195	2.6.3 (20020322)
1196	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1197	Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1198	File doc/chips/it87: add more temp_type help
1199	File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1200	add adm1021 section; add lm87 AIN[1,2] template;
1201	swap negative voltage limits for 782d,783s,627hf,
1202	697hf,it87; add more it87 help; swap neg. voltage
1203	limits for lm78(-j), lm79, w83781d, as99127f
1204	Library: Add PCF8591, W83697HF, ADM1023 support;
1205	fix w83* fan_min computes;
1206	swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1207	Module adm1024: Add MODULE_LICENSE("GPL")
1208	Module bt869: Add s-video out and DVD resolution support
1209	Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1210	Module fscscy: implement min/max for voltages and fans
1211	Module i2c-amd756: Add support for AMD768
1212	Module i2c-i810: Add support for 810E
1213	Module i2c-keywest: Big update, sync with kernel 2.4.18
1214	Module i2c-piix4: Check for uninitialized base address
1215	Module i2c-sis5595: Blacklist 645, 735
1216	Module i2c-viapro: Check for uninitialized base address
1217	Module gl518sm: Standardize /proc entries in0-3
1218	Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1219	fan -> fan1; fix temp2 limit writes
1220	Module pcf8574: Add support for PCF8574A; /proc interface changed
1221	Module pcf8591: new
1222	Module sis5595: Blacklist 645, 735
1223	Module w83781d: Add W83697HF support; allow force_subclients parameter
1224	for Tyan 2460
1225	Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1226	Program decode-vaio.pl: new
1227	Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1228	add text output
1229	Program init/sensors: New SysV init script
1230	Program mkpatch.pl: Add support for fscscy, add more help entries
1231	Program p4b_smbus: new
1232	Program rrd: Install summ_week.cgi
1233	Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1234	clean up chassis intrusion prints
1235	Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1236	fix Via686a and it87 detection;
1237	add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1238	fix uninitialized values; it87 beats lm78
1239
1240	2.6.2 (20011118)
1241	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1242	Chip Modules (all): malloc.h -> slab.h
1243	Modules (all): Add MODULE_LICENSE("GPL")
1244	File doc/FAQ: More updates and additions
1245	File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1246	Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1247	update it87 alarm ID's.
1248	Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1249	Module fscscy: new (Fujitsu-Siemens Scylla driver)
1250	Module i2c-amd756: Improve busy handling/printk's
1251	Module i2c-i801: Add 82801CA/CAM support
1252	Module i2c-keywest: Sync with PPC people, it works now
1253	Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1254	Module i2c-viapro: Add Via VT8233 support
1255	Module it87: Merge alarm_* /proc entries to alarms
1256	Module sis5595: Fix support for rev B0
1257	Module via686a: Make limit initializations reliable
1258	Module w83781d: Allow init=0 parameter to bypass initialization
1259	Program isadump: Add flat address space (PCI) support
1260	Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1261	fscpos, it87, maxilife, mtp008
1262	Program sensors: Fix w83781d temp precision
1263	Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1264	Fujitsu Poseidon and Scylla,
1265	Intel 82443MX and 82801CA/CAM detection,
1266	add ITE 8172G detection (driver in kernel 2.4.10)
1267
1268	2.6.1 (20010830)
1269	File BUGS: Updated
1270	File doc/FAQ: More updates and additions
1271	File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1272	File sensors.conf.eg: Fix/enhance it87 section
1273	Library: ds1621 and it87 updates
1274	Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1275	Module i2c-amd756: Add AMD 766 support
1276	Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1277	Module i2c-piix4: Add Serverworks CSB5 support
1278	Module i2c-sis5595: Recognize unsupported chips and refuse to load
1279	Module adm1025: Fixed temp2 min/max writes
1280	Module ds1621: Add 12-bit precision mode
1281	Module it87: Enable all alarms, add in8 support, add sensor type selection
1282	Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1283	remove support for module
1284	Module sis5595: Recognize unsupported chips and refuse to load
1285	Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1286	Program eepromer: new
1287	Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1288	of sensors.c as a module in kernel
1289	Program sensors: it87 updates; adjust temp. precision for some chips
1290	Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1291	recognize unsupported SiS chips;
1292	recognize AMD 766 and Serverworks CSB5.
1293
1294	2.6.0 (20010612)
1295	NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1296	If your make fails because it can't find <linux/i2c-proc.h>, you
1297	forgot this step!!!
1298	File doc/FAQ: Many, many updates and additions
1299	File doc/busses/i2c-sis5595: new
1300	File doc/busses/i2c-tsunami: new
1301	File doc/chips/it87: new
1302	File doc/chips/via686a: Claim support for 686b.
1303	File README.thinkpad: new
1304	File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1305	Add lm87, adm9240, ds1780, lm81 templates;
1306	Enhance help comments in file;
1307	Add Tyan S2510 dual-MTP008 example;
1308	Make separate sis5595 section.
1309	Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1310	Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1311	Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1312	Add support for maxilife-nba and amd1024;
1313	Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1314	Chip Modules (all ISA): Remove #include "i2c-isa.h"
1315	Chip Modules (all): Change from sensors_* to i2c_* globals
1316	for new i2c-proc.[ch]
1317	Makefiles: enhance to support Alpha architecture
1318	Module adm1021: Fix lm84 and gl523sm support
1319	Module adm1024: new
1320	Module i2c-i801: Chip detection cleanup
1321	Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1322	Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1323	Module i2c-tsunami: New
1324	Module i2c-via: Ensure i2c bus is tristated correctly.
1325	Module it87: new driver for IT8705, IT8712, Sis950 chips
1326	Module lm78: Recognize chipid=0x20
1327	Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1328	Module mtp008: Fix temp initializations;
1329	Save BIOS pin configuration of temps and fans;
1330	Fix sensor type reads/writes and fan min writes;
1331	Fix spurious invalid sensor type messages
1332	Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1333	used for patched kernel now.
1334	Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1335	Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1336	Allow force_addr=0xaddr
1337	Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1338	Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1339	reading changes; Add messages for subclient
1340	registration failure
1341	Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1342	Program i2cset: new
1343	Program isadump: fix for Alpha arch. compiles
1344	Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1345	Remove ltc1710; Fix i2c_sis5595 typo;
1346	Support kernel 2.4.5 makefile change;
1347	Add i2c-tsunami; fixed i2c-voodoo3 configuration
1348	Program sens_update_rrd: new
1349	Program sensord: Add -d (debug) and -p (pid-file) options
1350	Program sensors: Change reported version from 1.3 to the lm_sensors version;
1351	Fix swapped limit and hysteresis on 9240, 5595, 686a;
1352	Change mtp008 temps from max/min to limit/hyst;
1353	Add maxilife-nba, adm1024, it87 support.
1354	Program sensors-detect: Recognize lm78 with chipid=0x20;
1355	Recognize SMSC Victory66 South Bridge;
1356	Add devfs /dev/i2c/x support;
1357	Add adm1024, it87xx support; Add thinkpad warning.
1358	Program tellerstats: new
1359
1360	2.5.5 (20010115)
1361	NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1362	you have kernel 2.4.0-prerelease or greater.
1363	Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1364	File doc/developers/proc: new
1365	File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1366	Library: Add ds1621, mtp008 support
1367	Module adm1021: Add support for adm1021a / adm1023
1368	Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1369	Module adm1025: Add support for remote temp; rename /proc entries to
1370	in[0-5] and temp[1-2]; fix negative temp readings
1371	Module adm9240: Rename /proc entries to in[0-5]
1372	Module ddcmon: allow force and force_ddcmon parameters
1373	Module ds1621: new
1374	Module i2c-ali1535: Enhance error checking and recovery; add mutex
1375	Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1376	Module i2c-piix4: add support for ServerWorks southbridge OSB4
1377	Module lm87: cleanup, update voltage calculations
1378	Module mtp008: new
1379	Module pcf8574: change update time to 5 seconds
1380	Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1381	Module w83781d: fix beep setting via /proc
1382	Programs editticket, readticket: new
1383	Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1384	Program mkpatch.pl: more fixes; now adds many more modules
1385	Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1386	add adm1025 temp2; report temp limits correctly as
1387	min/max or limit/hysteresis; print message if no
1388	sensors are found. Removed false errors from lm87 reads.
1389	Program sensors-detect: Add ds1621, mtp008 detection;
1390	add ServerWorks detection
1391
1392	2.5.4 (20001012)
1393	Module i2c-viapro: Add support for Via 596B (0x3051)
1394	Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1395	Program mkpatch.pl: fixed infinite loop
1396	Program sensors-detect: Detect Via 596B (0x3051)
1397
1398	2.5.3 (20001008)
1399	NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1400	File useful_addresses.html: update
1401	Library: Add lm87 support
1402	Module pcf8574: new
1403	Module i2c-ali1535: new
1404	Module i2c-ali15x3: removed force #ifdef.
1405	Module i2c-i801: support Intel 82801BA (815E chipset)
1406	Module i2c-i801: add i2c block write support, fix smbus block bugs
1407	(requires i2c 2.5.3 package)
1408	Module i2c-i810: support Intel 82815
1409	Module lm87: new
1410	Module sensors: Fix for kernel 2.4.0-test8
1411	(remove copy_to_user_ret and put_user_ret)
1412	Module w83781d: limit fan divisors to 8 max. for as99127f
1413	Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1414	Program i2cdump: Add smbus block read support
1415	Programs i2cdetect, i2cdump: Improve error reporting
1416	Program sensors: new switch -u (--unknown)
1417	Program sensors-detect: detect Intel 82801BA (815E chipset)
1418	Program sensors-detect: detect Intel 82815
1419	Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1420	Program sensors-detect: detect National LM87
1421	Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1422	Program sensors-detect: Improve error reporting
1423
1424	2.5.2 (20000709)
1425	File sensors.conf.eg: Fix lm80 in8 calculation
1426	Module w83781d: W83783S no longer crashes on unloading
1427	Program sensors-detect: more robustness in case of unknown i2c adapters
1428	Program sensors-detect, libsensors: fix eeprom size reporting
1429	Program sensord: more flexibility, support for alarm scanning etc.
1430	Program sensors: support for ignore setting on sensor alarms.
1431	Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1432
1433	2.5.1 (20000618)
1434	Library: Add adm1025 support
1435	Module adm1025: new
1436	Module ddcmon: Fixed bus scan which could hang SMBus
1437	Module i2c-keywest: new
1438	Module maxilife: Add support for Maxilife '99 (NBA)
1439	Module via686a: Enable sensors if not enabled by BIOS
1440	Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1441	Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1442	Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1443	Module w83781d: Fis as99127f fan speed (was 66% too high)
1444	Module w83781d: Improve beep input checking
1445	Program i2cdump: Add Winbond-style bank selection
1446	Program isadump: Add Winbond-style bank selection
1447	Program sensors: Add adm1025 support.
1448	Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1449	Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1450	File sensors.conf.eg: Add Maxilife '99 entries
1451	File sensors.conf.eg: Remove some as99127f entries.
1452	Note: For as99127f, reinstall sensors.conf.eg manually (make install
1453	won't reinstall it) or else 'sensors -s' will fail.
1454
1455	2.5.0 (20000312)
1456	Dropped all kernel 2.0 and 2.1 compatibility
1457	Module i2c-i810: new
1458	Module ddcmon: new
1459	Module via686a: new
1460	Module i2c-amd756: fixed region request
1461	Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1462	Module w83781d: Don't change pin settings at initialization;
1463	also fix chip detection.
1464	Library: Support for ddcmon and via686a
1465	Program sensors-detect: Support for ddcmon and via686a
1466	Program sensors: Support for eeprom, ddcmon and via686a
1467
1468	2.4.5 (20000116)
1469	Introduced DESTDIR installation prefix
1470	Module lm80: fixes, temperature now read and set correctly
1471	Module i2c-voodoo3: driver enhancements
1472	Module w83781d: fixes, AS99127 works much better now
1473	Library: New ignore keyword in config file
1474	Programs: Support for new ignore keyword
1475	Program sensors-detect: Support for MGA detections
1476
1477	2.4.4 (19991201)
1478	Addition of the alpha release of AMD 756 SMBus host support.
1479	Many fixes and updates to the gl518sm driver
1480	Updates and fixes for device detection
1481
1482	2.4.0 (19990920)
1483	Too much to list.
1484	i2c and smbus parts are split off to a separate i2c package.
1485	New drivers and other stuff.
1486
1487	2.3.4 (19990616)
1488	Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1489	All: Now compiles against kernel 2.0.x (again ;)
1490	Module gl518sm: some updates and refinements
1491
1492	2.3.3 (19990603)
1493	All: Now compiles against kernel 2.3.x (x >= 1)
1494	Module i2c-voodoo3: Timing issue fixes
1495	Module bt869: Seems to be functional and relatively well tested
1496	Many modules were modified to be more compatible with the new
1497	Mutex structure in the new experimental kernels.
1498
1499	2.3.2 (19990507)
1500	Module i2c-hydra: Now compiles on 2.0.x kernels
1501	Module i2c-lm75: Slightly better detection
1502	* New, but not compiled by default:
1503	Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1504	Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1505
1506	2.3.1 (19990501)
1507	All: Now compiles on PPC
1508	Module i2c-hydra: NEW
1509	Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1510	Module w83781d: Removed deadlock (mutex was not initialized)
1511	Documentation: A few glitches removed
1512	Makefile: default module installation directory is now
1513	/lib/modules/current/extra/misc
1514	Program sensors-detect: PPC Hydra now detected
1515	Program sensors: Now prints complete GL518SM information
1516	Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1517
1518	2.3.0 (19990422)
1519	All: Many, many changes and improvements
1520	All: Many small bugs and problems removed
1521	Modules: New insmod parameters
1522	Modules: Much improved chip detection
1523	Module maxilife: NEW
1524	Module adm1021: MAX1617A now also supported
1525	Module adm9240: DS1780 now also supported
1526	Module w83781d: W83782D and W83783S now also supported
1527	Program sensors-detect: NEW
1528	Library: All chips now supported
1529	Documentation: Very much improved
1530
1531	2.2.2 (199903??)
1532	Just some minor updates and bug fixes.
1533
1534	2.2.1 (19990218)
1535	All: Removed compile warnings
1536	Module i2c-dev: Small bug removed if DEBUG=1 was used
1537	Module sis5595: Now compiles for 2.0 kernels
1538	Module adm1021: Detection corrected
1539
1540	2.2.0 (19990216)
1541	All: Set copyrights to include 1999
1542	All: Small bugfixes
1543	I2C: Upgraded to newest archive of Simon Vogl
1544	Module i2c-dev: NEW
1545	Module i2c-ali15x3: NEW
1546	Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1547	directories, and somewhat improved
1548	Module sis5595: NEW
1549	Modules: Renamed all bus modules to i2c-*, new directory lay-out
1550	Library: Support for new chip drivers, several small bugs fixed
1551	Library manual pages: NEW
1552	Program i2cdetect: Moved to detect directory
1553	Program detect.pl: NEW
1554	Program doc-features: NEW
1555	Program sensors: Added man-page
1556	Document BUGS: Added cdrom bug and kernel i2c conflict
1557
1558	2.1.2 (19990116)
1559	Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1560	Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1561	Documentation in doc/kernel: NEW
1562
1563	2.1.1 (19990107)
1564	Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1565	and older
1566	Module gl518sm.o: Miscelaneous bugs and problems solved
1567	Program isadump: NEW
1568
1569	2.1.0 (19981230)
1570	Library: Completely NEW
1571	Program sensors: NEW
1572	Program grab_busses: NEW
1573	Program decode-dimms: More information
1574	Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1575	Module w83781d.o: NEW
1576	Module lm80.o: NEW
1577	Module gl518sm.o: new procfile beep, several small updates
1578	Modules: Now use pin readings, no more scaling within the kernel (use the
1579	library instead)
1580
1581	2.0.2 (19981214)
1582	Module eeprom.o: NEW
1583	Program decode-dimms: NEW
1584	Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1585	2.1.58
1586	Modules: Somewhat less verbose on transfers
1587	Module lm78.o now recognizes and handles lm78-j and lm79
1588
1589	2.0.1 (1998121?)
1590	Module gl518sm.o updates, to make it actually work
1591	Module lm75.o high/low-byte swapping write bug fixed
1592
1593	2.0.0 (19981209)
1594	Initial release

Note: See TracBrowser for help on using the browser.

Download in other formats:

Original Format