root/lm-sensors/trunk/CHANGES @ 4329

Revision 4329, 77.7 KB (checked in by khali, 8 years ago)

Add SMSC LPC47M292 detection.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  Library: Do not skip i2c adapters with only a class device and no
6            physical device. This change is required to survive the
7            planned struct class_dev removal from future 2.6 kernels.
8  Man page i2cdetect.8: Scanning range can be restricted
9  Module bmcsensors: Fix debugging messages
10  Module i2c-ali1563: Improve the status messages (2.6 backport)
11                      Fix device initialization (2.6 backport)
12  Module i2c-amd8111: Cleanups (2.6 backport)
13                      Fix initialization race (2.6 backport)
14  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
15  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
16  Module i2c-viapro: Add CX700 support (2.6 backport)
17  Programs i2cdetect, i2cdump, isadump: Flush output in real time
18  Program sensors-detect: Only probe relevant I2C addresses
19                          Drop ARP-capable device detection
20                          Add Maxim MAX6655/MAX6656 detection
21                           (Olexiy Avramchenko)
22                          Add Maxim MAX1668, MAX1805, MAX1989 detection
23                          Add VIA CX700 detection
24                          Drop legacy W83627HF ISA detection
25                          Don't bufferize stdout during probes
26                          Speed up the LM75 and LM77 detection
27                          Clean up the EEPROM detection
28                          Add Dallas DS75 detection
29                          Add SMSC LPC47M292 detection
30
31
322.10.2 (20070115)
33  RPM: Obsolete, removed
34  File doc/fan-divisors: Update
35  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
36  Library: Add support for the pc87247 driver (fans only)
37           Probe for busses before chips
38           Drop support for algorithm names
39           Add support for coretemp driver   
40           Major update/optimization of config-file scanner
41           Add config-file scanner regression tests
42           Add f71872f support
43           Add w83627dhg support (David Holl, #2157)
44           Get the i2c adapter names from classdev.name
45           Add adm1029 support (Corentin Labbe)
46  Man page i2cdetect.8: Describe the output convention
47  Man page sensors.1: Update (option -c) and clean up
48  Module bmcsensors: Fix several warnings
49                     Fix fragile structure initialization
50  Module i2c-i801: Add ICH9 support
51  Module p4b_smbus: Add support for the ICH5
52  Module f71805f: Fix the device address decoding (2.6 backport)
53  Module icspll: Delete. It was useless and dangerous.
54  Program decode-dimms.pl: Remove spaces at end of lines
55  Program eepromer: Fix loads of warnings
56  Program i2cdetect: Make the output clearer
57  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
58  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
59                            without need of recompilation.
60  Programs dump/*: More robust handling of user inputs
61  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
62                                  Add support for non-i2c drivers
63  Program fancontrol.pl: Disable debugging by default
64                         Add support for non-i2c drivers
65                         More tolerant config file parsing
66  Program sensord: Add pc87247 support (fans only)
67                   Add vt1211 support (#2150)
68                   Add w83627dhg support (David Holl, #2157)
69                   Add w83627ehf voltage support (Dave Platt)
70                   Add k8temp support (Dave Platt)
71  Program sensors: Add pc87247 support (fans only)
72                   Hide error on missing f71805f fan
73                   Handle option -c more efficiently
74                   Drop option -a (show algorithm names)
75                   Add f71872f support
76                   Add w83627dhg support (David Holl, #2157)
77                   Add adm1029 support (Corentin Labbe)
78                   Hide error on missing w83793 temp (Gong Jun)
79  Program sensors-detect: Add SMSC DME1737 detection
80                          Add Fintek F71882FG and EPoX EP1308 detection
81                          Add Intel Core thermal sensor detection
82                          Preallocate memory for I2C_FUNCS ioctl (#2138)
83                          Prevent misdetection of MAX6633/MAX6634/MAX6635
84                          Add Intel ICH9 detection
85                          Add Maxim MAX6648/MAX6692 detection
86                          Improve ADM1029 detection
87                          Add Andigilog chips detection
88                          Add Intel AMB FB-DIMM thermal sensor detection
89                          Add ATI SB600 detection
90
91
922.10.1 (20060924)
93  File doc/developers/checklist renamed to dev/developers/release_checklist
94          with clarifications and updates for new SVN server.
95  File README.package: Delete.
96  File doc/busses/i2c-piix4: Update (2.6 backport)
97  File doc/developers/sysfs-interface: Update
98  File etc/sensors.conf.eg: Add an smsc47m192 section
99                            Comment out all set statements
100                            Add an it8716 section
101                            Add a w83793 section
102                            Adjust the vt1211 section to match the new driver
103                             interface
104  Library: Fix device scan when no i2c support is present
105           Add support for W83627EHF voltage inputs and alarms
106           Add support for the smsc47m192 driver
107           Fix all memory leaks (yeah!)
108           Fix no sensors being reported as an error
109           Add support for the IT8716F and IT8718F chips
110           Add support for the W83793 chip (Yuan Mu)
111           Map the 2.6 adm1026's fan8 to fan0
112           Missing sysfs busses and classes are not errors
113           Change vt1211 temp3-7 magnitude from 1 to 3
114  Makefile: Don't grep autoconf.h on user-space targets
115            Fix depmod on non-running kernel version
116            Remove empty include directories on make user_uninstall
117  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
118  Module i2c-amd756-s4882: Improve static semaphore initialization
119                           (2.6 backport)
120  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
121                   Add ICH8 support (2.6 backport)
122                   Fix block transaction poll loops (2.6 backport)
123                   Remove PCI function check (2.6 backport)
124                   Cleanups (2.6 backport)
125  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
126  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
127                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
128                    Drop the fix_hstcfg parameter (2.6 backport)
129  Module i2c-viapro: Fix compilation with kernels < 2.4.21
130                     Add VT8237A and VT8251
131  Module lm83: Add LM82 support (2.6 backport)
132  Module vt1211: The VT1211 has no in6
133                 Rework the voltage and temperature conversions and the
134                  temperature input order to match the Linux 2.6 driver
135  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
136                  Add specific alarm and beep defines for the W83791D
137  Module w83792d: Fix PWM range (2.6 backport)
138  Program decode-dimms.pl: Decode depending on the memory type
139                           Decode the manufacturing date to an ISO8601 date
140                           Add the memory size computation and provide brief
141                            timing characteritics for SDRAM/DDR/DDR2 memory
142                           Add memory size computation for Rambus memory
143                           Various output cleanups and fixes
144  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
145  Program decode-vaio.pl: Detect and skip false positives
146  Program i2cdetect: Add a mode to print adapter functionalities
147  Program i2cdump: Restore bank after bank switching
148                   Add new mode W (read word on even register addresses)
149  Program mkpatch: Fix typo breaking f71805f
150                   Turn warnings on (-w), and fix them
151                   Print a usage message on missing command line parameters
152  Program pwmconfig: Use mktemp instead of tempfile
153  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
154                   Add smsc47m192 support
155                   Add abituguru support (Hans de Goede)
156                   Fix memory leak when printing an unknown chip
157                   Add it8716 and it8718 support
158                   Make each it87 fan and fan div optional
159                   Print missing w83791d values
160                   Add w83793 support (Yuan Mu)
161                   The adt7463 may not have in4 (#2119)
162                   Hide more vt1211 missing input errors
163                   Clearer error messages when no sensors found
164  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
165                          Add ATI IXP200/300/400 SMBus detection
166                          Prevent warning on 64-bit PCI addresses
167                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
168                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
169                           F75384S/M, F75387SG/RG and F81218D detection
170                          Add Winbond W83793R/G and W83627DHG detection
171                          Handle the W83791D driver difference between kernels
172                          Add nForce4 MCP04, MCP51 and MCP55 detection
173                          Add AMD Geode devices detection
174                          Add ITE IT8716F and IT8718F detection
175                          Add NatSemi/Winbond PC87427 detection
176                          Get driver information for busy addresses from
177                           sysfs (2.6 only)
178                          Drop the ISA IT87xxF detection
179                          Check i2c adapter functionalities before probing
180                          Add Intel ICH8 SMBus detection
181                          Add AMD K8 thermal sensors detection
182                          Simplify detection of SiS5595, VIA686 and VT8231
183                          Add Analog Devices ADM1033, ADM1034, ADT7462,
184                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
185                          Check for root user at startup
186                          Attempt to be slightly more user-friendly
187                          Add VT8237A and VT8251
188                          Remove detection of nVidia graphics adapters
189                          Use sysfs for PCI device enumeration
190                          Add generic PCI SMBus adapter detection
191                          Add generic Super-I/O logical device detection
192                          Add SMSC LPC47M172/182 detection
193
194
1952.10.0 (20060214)
196  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
197  File doc/busses/i2c-viapro: Update (2.6 backport)
198  File doc/chips/via686a: Update (2.6 backport)
199  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
200  File etc/sensors.conf.eg: Do not set vrm by default
201  File i2c-dev.h: Fix union i2c_smbus_data definition
202                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
203                  Add missing parentheses around macros
204                  Drop I2C_FUNC_SMBUS_EMUL
205                  Drop I2C_FUNC_SMBUS_*_PEC
206                  Drop I2C_SMBUS_*_PEC
207  File sensors_vid.h: Drop default VRM
208  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
209           This is intentional.  Use decode-dimms.pl if you still
210           need your memory SPD data.
211  Library: Big update to use libsysfs.  More TODO though.
212           Fix bus matching code for Linux 2.6 (Karsten Petersen)
213           Add f71805f, w83687thf support
214           Add platform drivers support
215           Fix sysctl warnings on x86_64
216           Restore vt1211 temp1
217  Makefile: Compile user-space programs with -Wundef
218  Module i2c-i801: Simplify the hardware PEC code
219                   Always set PEC mode explicitly before each transaction
220  Module i2c-i810: Documentation update, PCI IDs cleanup
221  Module i2c-keywest: Remove bus probing code (2.6 backport)
222  Module i2c-nforce2: Remove dead code (2.6 backport)
223                      Add the ID of the nForce4 MCP-04 (2.6 backport)
224  Module i2c-via: Remove dead code
225  Module i2c-viapro: Remove dead code
226                     Support I2C block read (2.6 backport)
227                     Code cleanups (2.6 backport)
228                     Improve debug register dump (2.6 backport)
229  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
230          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
231          i2c-sis645: Use pci_driver name to request I/O region; do
232                      not initialize i2c_adapter name to "unset" (2.6
233                      backport)
234  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
235                                              (2.6 backport)
236  Module adm9240: Cleanups (2.6 backport)
237  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
238  Module it87: Minor cleanups
239               Fix fan3_div setting bug (Anton V. Staaf)
240  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
241               Separate the register read function
242               Add PEC support for the ADM1032
243  Module via686a: Cleanups
244  Module w83627hf: Drop useless initialization step (2.6 backport)
245                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
246                   Fix alarms (Yuan Mu)
247                   Preserve fan min on fan div change (Yuan Mu)
248                   Properly handle W83627THF without VID (Yuan Mu)
249                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
250                   Add W83687THF support
251  Module w83781d: Drop W83697HF support (Grant Coady)
252  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
253                  Fix fan control mode (PWM/DC) reporting
254                  Fix fan div auto-adjust (Yuan Mu)
255                  Fix the subclient handling
256  Module w83l785ts: Minor cleanup (2.6 backport)
257  Module vt1211: Restore temp1
258  Modules vt1211, vt8231: Change default VRM to 9.1
259  Program decode-dimms.pl: Add lookup tables for manufacturer names
260                           Fix rounding error in PCxxxx speed computation
261                           Improve text output
262                           Improve speed under Linux 2.6
263                           Verify checksum before decoding anything
264                           Improve manufacturing location decoding
265                           Improve memory type detection
266                           Improve part number decoding
267  Program i2cdump: Drop now useless #ifdef tests
268                   Fix capability check for continuous byte mode
269  Program i2cget: New
270  Program i2cset: Add PEC support
271                  Fix argc check
272  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
273                                       Print the correct bus type if bus
274                                       functionality can be queried
275  Program isadump: Display the real addresses in flat mode
276  Program mkdev.sh: Silently skip already existing nodes
277  Program mkpatch: Include f71805f
278  Program sensord: Do not log algorithm names
279                   Drop EEPROM support (Aurelien Jarno)
280                   Add W83627EHF, F71805F/FG support
281                   Fix PC87365/PC87366 alarms
282  Program sensors: Drop free_the_label
283                   Fix compilation with uclibc (no iconv)
284                   Add f71805f, w83687thf support
285  Program sensors-detect: Drop algorithm names
286                          Do not rely on i2cdetect -l printing algo names
287                          Simplify adapter name matching mechanism
288                          New address for ADM1032, ADT7461
289                          Improve ADT7467, ADT7468 support
290                          Fix MAX6659 reported driver
291                          Add Fintek F71805F detection
292                          Add Analog Devices ADT7476 detection
293                          Add Intel 82845G detection
294                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
295                          Fix udev detection in some corner case
296                          Improve DS1621 detection
297                          Always prefer ISA access over SMBus access
298
299
3002.9.2 (20050906)
301  File doc/chips/*: Big update (2.6 backport)
302  Library: Drop ds1780-specific code (now use adm9240)
303           Fix memory leak in sensors_get_label()
304           Support /sys/class/hwmon (Linux 2.6.14+)
305           Limit stack usage in sensors_read_proc_chips()
306  Makefile: Detect 2.6+ kernels and check targets
307  Man page isaset.8: Fix typos
308  Module adm1031: Fix broken kfree() calls
309  Module i2c-ali1563: New (2.6 backport by Winbond)
310  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
311  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
312          w83627hf.c: Tag find function __init
313  Module lm93: Fix memory leak
314  Module smsc47m1: Fix PWM enable polarity on read
315  Modules w83627hf, w83781d: Allow setting fan divisor to 128
316  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
317                           Added DDR/DDR2 frequency reporting in convenient
318                           form of DDRxxx PCyyyy
319  Program i2cdump: Properly handle short i2c block reads
320  Program fancontrol.pl: Fix compile errors
321  Program mkpatch: Include i2c-ali1563
322                   Include w83792d
323  Program pwmconfig: Fix unsafe temporary file use
324  Program rrd: Support 2.6 kernels
325  Program sensord: Add support for w83637hf
326                   Support pc87360 (Henrik Brix Andersen)
327  Program sensors: Support the VAIO "VGN" prefix for eeprom
328  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
329                          Advertise the w83792d driver
330                          Improve IT8705F and IT8712F detection
331                          Merge LM82 and LM83 detection
332                          Add W83687THF detection
333
334
3352.9.1 (20050412)
336  File doc/busses/i2c-nforce2: Update
337  File doc/chips/it87: Update
338  File doc/chips/lm90: Update for adt7461
339  File doc/chips/mic74: New
340  File etc/sensors.conf.eg: New sections for lm92 and w83792d
341  Library: Add support for 2.6 fscpos driver (Stefan Ott)
342           Fix sis5595 in4 (Aurelien Jarno)
343           Add support for 2.6 gl520sm driver (Maarten Deprez)
344           Add support for 2.6 bmcsensors driver (Yani Ioannou)
345           Add support for w83792d (Chunhao Huang/Winbond)
346           Add support for 2.6 adt7461 (James Chapman)
347           Add support for 2.6 lm92
348           Add support for 2.6 vt1211
349           Add preliminary support for 2.6 w83627ehf
350  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
351            Use -fno-strict-aliasing on all architectures
352  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
353  Module bmcsensors: Fix compile error
354                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
355  Module ds1621: Fix detection (Aurelien Jarno)
356  Module eeprom: Discard SPD-centric checksum module parameter
357                 Cleanup detection function (backport from Linux 2.6)
358  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
359  Module i2c-i801: Temporarily disable broken I2C block read
360  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
361                   Gelato)
362  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
363  Module i2c-viapro: Prevent repeated resets
364  Module it87: Improve Super-I/O detection
365               Limit I2C address range
366               Support VID on the IT8712F
367  Module lm75: Only initialize CMP/INT bit
368  Module lm78: Fix bug with setting negative temperature limits
369  Module lm85: Properly differentiate between ADM1027 and ADT7463
370               Add EMC6D102 support
371  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
372               Add limited ADT7461 support
373  Module lm93: Fix IN10 (+5V) scaling
374  Module mic74: New
375  Module w83627hf: Support secondary Super-I/O address
376                   Enable temp2 and temp3 if they are disabled
377  Module w83781d: Revert AS99127F temp2 and temp3 computation change
378                  Skip final initialization step for AS99127F chips
379  Module w83792d: New (Chunhao Huang/Winbond)
380  Program ddcmon: New; user-space replacement for the ddcmon driver
381  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
382  Program isadump: Handle Super-I/O keys
383  Program lm_sensors.init: Cleanups (Axel Thimm)
384  Program mkdev.sh: Add basic command-line interface
385  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
386  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
387                     Don't complain about read-only enable files (lm85)
388                     Fix handling of alternate config file name
389  Program sensord: Fix erroneous error message (Aurelien Jarno)
390                   Support sis5595 in4 (Aurelien Jarno)
391                   Support w83627thf
392                   Support the separate it8712 prefix (Aurelien Jarno)
393  Program sensors: Display sis5595 in4 (Aurelien Jarno)
394                   No errors on missing pc87360 fans
395                   Add gl520sm support (Maarten Deprez)
396                   Improve vt1211 error/ignore handling (Michael Carland)
397                   Support w83792d, w83627ehf
398  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
399                          Improve IT8705F and IT8712F detection
400                          Improve udev detection
401                          Fix DS1621 detection
402                          Add W83627EHF detection
403                          Add ATI SMBus detection
404                          Add VT1211 alias detection
405                          Warn if chip modules not found
406                          Add i2c-ipmi to list if bmcsensors is on it
407                          Add PC87591 detection
408                          Search for correct udev db file name
409                          Add nForce3 250Gb and nForce4 detection
410
411
4122.9.0 (20041228)
413  NOTE: Requires i2c-2.9.0 or newer!
414  File README.thinkpad: Update
415  File doc/chips/it87: Cleanups
416  File doc/chips/lm63: New
417  File etc/sensors.conf.eg: Set via686a voltage limits
418  File kernel/chips/Module.mk: Resync module list with mkpatch
419  File kernel/include/sensors_compat.h: Define __devexit_p if missing
420                                        (kernels 2.4.16 and older)
421  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
422                             and dec_use removed in release 2.8.0
423  Modules (all chip drivers): Remove owner from i2c_driver; pass
424                              controlling_mod to i2c_register_entry() again
425  Module bmcsensors: Support function 1/x
426  Module i2c-amd756: Display the real bus name
427  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
428  Module i2c-i801: Support i2c block read (ICH5 and higher)
429                   Add PEC support for ICH6
430                   Add support for ICH7
431  Module i2c-ipmb: Remove from build since it doesn't work
432  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
433  Module icspll: Fix compilation
434  Module lm63: New driver for the National Semiconductor LM63
435  Module lm83: Use signed types for temperatures
436               Check limits on register writes
437  Module lm87: Round voltages properly
438               Retry on read errors (David Knierim)
439               Less agressive init (no reset)
440  Module lm90: Use signed types for temperatures
441               Check limits on register writes
442  Module lm93: Added module parameter for VID pin input thresholds.
443               Fix typo in dynamic VID alarms
444               Adds a couple log messages for failed transactions (David
445               Knierim)
446               Fix compilation breaking C99-ism (Axel Thimm)
447               Fix block read retries
448  Module pc87360: Support secondary Super-I/O address
449  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
450  Library: Add lm63 support
451           Add lpc47b397 support
452  Programs *.init: Rename lockfile to match file name
453  Programs i2cset, isaset: Written byte/word can be masked
454  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
455  Program mkpatch: Include i2c-amd756-s4882
456  Program pwmconfig: Handle new (well, back to old) pwm files names for
457                     Linux 2.6.10 and up
458  Program sensord: Do not scale load average (Aurelien Jarno)
459  Program sensors: Add lm63, lpc47b397 support
460                   Support DDR2 memory module EEPROMs (Rudolf Marek)
461                   Support only one location for the default configuration file
462                   Display the default configuration file location in --help
463                   Simplify the configuration file opening code
464  Program sensors-detect: Improve LM63 detection
465                          Discard IBM Thinkpad detection code
466                          Add PCA9556, LPC47B397, ICH7 detection
467                          Fix W83792D detection, add W83791SD detection
468
469
4702.8.8 (20041007)
471  File doc/donations: Update
472  File doc/lm_sensors-FAQ.texi: Add 4.6.1
473                                Update 4.7
474  File doc/chips/gl518sm: Update "iterate" info
475  File doc/chips/it87: Discard outdated module parameters
476  File doc/chips/lm75: LM77 is not supported
477  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
478  File doc/chips/lm93: New
479  File doc/chips/w83l785ts: Improvements
480  File etc/sensors.conf.eg: Fix it87 lines order
481                            Update lm87 section
482  File kernel/include/sensors_vid.h: Support VRM 10.0
483  Library: Support 2.6 adm1025
484           Preliminary support for 2.6 lm87
485           Support 2.6 adm9240
486           Allow an alternative sysfs file name for chip features (2.6)
487           Fix lm83 critical limits (2.6)
488           Add lm93 support
489           Prevent some procfs errors from being silently ignored
490  Makefiles: Implement user_uninstall (Rudolf Marek)
491             Spoof LOGNAME and HOSTNAME when making html man pages
492  Module adm1025: Refine detection
493                  Update limit registers again (revert of 2.8.1)
494                  Init high limits if they read 0
495                  Fix conversions
496  Module lm75: Refine detection
497  Module lm78: Fix init
498  Module lm83: Default to kind lm83 if forced.
499               Fix temperature macros.
500  Module lm90: Add LM86, MAX6657 and MAX6658 support
501  Module lm93: New
502  Module mtp008: Fix the setting of limits on temp2
503  Module pca9540: Refine detection
504  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
505                  Support VID
506                  Fix fan_div file when fan count is less than 3
507                  Additional init and debug
508  Module smsc47m1: Fix pwm_enable being inverted
509  Module w83627hf: Add alternate VCORE/in0 calculation method
510                   Remove reset of chip by driver on initialization
511  Module w83781d: Fix default VRM for w83791d
512  Module w83l785ts: Implement read error handling (backport from 2.6)
513  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
514                    Wait for user input to continue (as opposed to 5 sec
515                    delay), can be skipped with -y
516                    Various cleanups and code refactoring
517                    Update manual pages
518  Program fancontrol.init: New (Dean Takemori)
519  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
520  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
521                           (Giuseppe Della Bianca)
522  Program mkdev.sh: Detect devfs and refuse to run
523                    Use mknod's mode instead of chmod
524  Program mkpatch: Include xeontemp and pc87360
525  Program sensors: Rework adm1025 support
526                   Display pc87365/pc87366 VID
527                   Improve smsc47m1 support
528                   Hide 2.6 adm1027 alarm_mask being missing
529                   Print VRM version for all supported chips
530  Program sensors-detect: Support LM93, LM77, LM63
531                          Support PC8739x Super-I/O family (no sensors)
532                          Fix PCA9540 support
533                          Refine ADM1025/ADM1025A detection
534                          Refine LM75 detection
535                          Ignore missing /proc/modules (Andras Bali)
536                          Script-wide Perl cleanups
537                          Support udev
538                          Support W83792D, LM96000
539
540
5412.8.7 (20040611)
542  File README.thinkpad: Update 24RF08 status
543  File doc/fan-divisors: More info on accuracy
544  File doc/lm_sensors-FAQ.texi: Update 4.27
545  File doc/chips/adm1031: New
546  File doc/chips/max1619: New
547  File doc/chips/pc87360-fan: Renamed to pc87360
548  File doc/chips/pc87360: Big update
549  File doc/chips/w83781d: Update AS99127F documentation
550  File etc/sensors.conf.eg: Add comments about BP6 voltages
551                            Add comment on Asus A7V8X-X VCore
552                            Misc fixes to lm80 section
553                            Update via686a section
554                            New lm99 section
555                            Add section for LM85-like chips
556                            Preliminary pc87366 section
557                            Add comment on GL520SM application modes
558                            Document beep_enable (Aurelien Jarno)
559                            Preliminary max1619 section
560                            Preliminary adm1030 and adm1031 sections
561  Library: Fix 2.6 VRM
562           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
563           Fully support the PC87360 family
564           Support the lm99
565           Add version and date strings
566           Support 2.6 max1619
567  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
568  Man page i2cdetect.8: document new command line flags
569  Man page i2cdump.8: More details on how i2cdump can write to a chip
570  Modules (all chip drivers): Rework memory allocation scheme.
571  Module adm1031: New (Alexandre d'Alton)
572  Module bmcsensors: Fix oops by creating thread for initialization
573  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
574  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
575          asb100.c, lm92.c: Use swab16
576  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
577  Module gl520sm: Less agressive initialization process
578                  Fix temp1 limits being unsettable in application
579                  Ensure that temp2 and in4 are not used at the same time
580  Module i2c-i801: Support 6300ESB and ICH6
581  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
582  Module i2c-sis645: Add support for SiS655
583  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
584  Module lm90: Support LM99 and LM89
585  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
586               Get rid of useless i2c_probe call
587  Module max1619: New (Alexey Fisher)
588  Module p4b_smbus: Add support for mobile versions of the 82801
589                    (Axel Thimm)
590  Module pc87360-fan: Renamed to pc87360
591  Module pc87360: Also support PC87365 and PC87366
592                  Add write support
593                  Correctly set the chip name depending on the type
594                  Add voltage and temperature support
595                  Fix fan speed computation
596                  Retrieve fans configuration from Super-I/O space
597                  Export pwm_enable (read-only)
598                  Honor pwm invert bits
599                  Clear fan alarms after we read them
600                  Do not read fan data when monitoring is disabled
601                  Do not include SENSORS_INSMOD stuff
602                  New module parameter: init
603                  Fan clock dividers change automatically
604                  Add thermistor dupport
605  Module smsc47m1: Lock on reads and writes
606                   Various PWM fixes
607  Module thmc50: Fix address range
608  Module via686a: Fix voltage roundings
609                  Simplify temperature conversions
610  Module w83781d: Drop PWM support for as99127f
611                  Invert AS99127F beep bits in driver rather than user-space
612  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
613  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
614  Program fancontrol.pl: New
615  Program i2cdetect: Adapt probing method to address
616                     Add -q and -r flags to force probing methods
617                     Allow probing range selection
618  Program isadump: Major improvements
619  Program isaset: New
620  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
621                   module
622                   Include i2c-nforce2
623  Program sensord: New --rrd-no-average parameter
624                   Syncronize time slots with rrd
625                   Fix W83781D temp3 alarm (Aurelien Jarno)
626                   Add ASB100 support (Andrew May)
627  Program sensors: Fully support the PC87360 family
628                   Fix lm80 temperature alarms
629                   Support the lm99
630                   Do not invert AS99127F beep bits anymore
631                   Fix W83781D temp3 alarm (Aurelien Jarno)
632                   Print library version string
633  Program sensors-detect: Rework Super I/O detection
634                          Support SiS655/SiS96x
635                          Support ADT7461 and ADT7467
636                          Better support for ADM1027, ADT7460 and ADT7463
637                          Explicitly support ADM1028
638                          Scan all logical devices of PC87365 and PC87366
639                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
640                          Detect eeproms with software write protect (not
641                          enabled by default)
642                          Support ALi 1563 (2.6 only)
643                          Drop LTC1710 support
644                          Use byte reads for probing on ranges 0x30-0x37 and
645                          0x50-0x5F
646                          Improve LM89 and LM99 support
647                          Support GeForce FX 5900 video cards
648                          Fix devfs misdetection (Aurelien Jarno)
649                          Detect 6300ESB, ICH6
650                          Fix double detection of ISA chips
651                          Support MAX1619
652                          Support PC87373 Super-I/O
653                          Fix unknown adapters appearing multiple times
654                          Refine MAX6650/MAX6651 detection
655
656
6572.8.6 (20040405)
658  File README.thinkpad: Update status
659  File doc/chips/pca9540: New
660  File doc/chips/pc87360-fan: New
661  File etc/sensors.conf.eg: Update pcf8591 default configuration
662  Library: Switch to new sysfs naming standard
663           Fix gcc 3.3 warnings (Philipp Thomas)
664           Support 2.6 ds1621 and pcf8591
665           Change pcf8591 magnitudes
666           Support pc87360-fan
667  Makefile: Install shared library 755
668  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
669  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
670  Modules ds1621, pcf8591: Check for capabilities before using them
671                           (Aurelien Jarno)
672  Modules pcf8574, pcf8591: Cleanups
673  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
674  Module adm1021: Better detection and initialization
675  Module pca9540: New driver for the Philips PCA9540
676  Module pc87360-fan: New driver for the National Semiconductor PC87360,
677                      PC87363 and PC87364 Super I/O chips
678  Module smsc47m1: Support the LPC47B27x
679  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
680  Program i2cdetect: Skip special addresses by default
681  Program sensord: Prevent null pointer dereference (Tim Toohey)
682  Program sensors: Print the degree symbol in the terminal's current locale
683                   (Aurelien Jarno)
684                   Update pcf8591 print to support 2.6 driver
685                   Support pc87360-fan
686  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
687                          Improved SiS chips support
688                          Add a white list of IBM systems
689                          Drop support of undetectable adapters
690                          Fix smart battery detection
691                          Add smart battery charger and manager detection
692                          Rework adm1021 and clones detection
693                          The PC87360, PC87363 and PC87364 Super I/O chips
694                          now have a (preliminary) driver
695                          Rework Super I/O detection
696                          Better support of devfs
697  Program sensors-detect-stat.pl: New
698
699
7002.8.5 (20040305)
701  File doc/chips/SUMMARY: Update
702  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
703  Makefiles hotplug and rrd: Remove -o and -g arguments to install
704  Module bmcsensors: Increase max SDRs to 100
705  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
706  Module i2c-amd756: Don't register driver to avoid driver conflicts.
707                     (Daniel Rune Jensen)
708  Module it87: Better temperature sensor types handling (Takeru Komoriya)
709               Fix reset=1 (Takeru Komoriya)
710  Module lm80: Code cleanups
711  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
712  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
713  Module w83627hf: Add w83637hf support
714                   Fix exported name
715                   Fix PWM in w83627thf
716                   Preserve other bits when forcing temp2/3 to comparator mode
717  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
718                  Remove asb100 support
719  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
720          Define driver ID if i2c-id.h doesn't have it yet.
721  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
722          Backport oops fix from Linux 2.6.
723  Modules (all chips): Get rid of useless headers
724  Program decode-edid.pl: Add sysfs support
725  Program sensors: Add w83637hf support
726                   Add support for Shuttle Ethernet EEPROMs
727                   Drop 2.6 subclient detection
728  Program sensors-detect: Add heuristics to the LM80 detection function
729                          Add support for W83L785R, improve W83L784R/AR
730                          Add GeForce FX 5600 as supported by rivatv
731                          More Super IO chips, better handling
732  Library: Update to match renames in fscher
733           Reverse temporary changes to w83l785ts mappings
734           Fix vt1211 and vt8231 uch_config not being writable
735           Add 2.6 lm80 support
736           Add w83637hf support
737           Remove in6 and temp1 from vt1211 and vt8231
738           Add support for Shuttle Ethernet EEPROMs
739           Remove unused as99127f features
740
741
7422.8.4 (20040207)
743  File doc/lm_sensors-FAQ.texi: Update 4.20.
744  File doc/chips/it87: Change hyst to low
745  File doc/chips/w83l785ts: New
746  File etc/sensors.conf.eg: Change it87 hyst to low
747                            Fix w83697hf supposed to have temp3
748                            Limits initialization for adm1025/ne1619
749                            Handle fscher voltage conversions
750                            Add Tyan Trinity S2495 KT400 setup (Eric
751                              Schumann)
752                            Fix fscher fan labels (Reinhard Nissl)
753  Library: Better 2.6 eeprom support
754           Change it87 hyst to low
755           Add 2.6 gl518sm, fscher support
756           Fix 2.6 negative voltages handling
757           Temporary fix to w83l785ts mappings
758  Module adm1025: Separate prefix for NE1619
759  Module adm1026: Remove use of temporary ID
760                  Define addresses as a range
761  Module bmcsensors: Fix reservations
762  Module fscher: Externalize voltage conversions
763  Module eeprom: Remove memtype
764  Module i2c-piix4: Fix resource release error
765                    Various cleanups
766  Program decode-vaio.pl: Add sysfs support
767  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
768                   Drop linux 2.2 support
769                   Add w83627hf
770  Program sensors: Do not show algorithm by default
771                   Cleanup temperature unit display code
772                   Cleanup label spacing code
773                   Fix output to UTF-8 terms (Marcel Sebek)
774                   Simplify gl518sm print
775                   Do not ignore errors in FSC chips prints
776                   Fix w83l785ts print
777                   Cleanup FSC chips prints
778  Program sensors-detect: Fix PATH issues
779                          Correctly point to the fscher driver
780
781
7822.8.3 (20040115)
783  File lm_sensors.spec: Update
784  Library: Add 2.6 eeprom, lm90 support
785           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
786  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
787  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
788  Module i2c-amd756: Fix byte writes
789  Module i2c-tsunami: Cleanups (Daniel Nilsson)
790  Module it87: Fix sg_tlx writes; fix sensor type reporting;
791               add 8712 Super I/O detection;
792               remove initialization of temp_type and fan_ctl;
793               remove init and temp_type module parameters
794  Module lm90: Handle hysteresis differently
795  Module smartbatt: Fix detection, magnitudes, temp
796  Module w83781d: Fix negative voltages
797  Module w83l785ts: New
798  Program eeprog: Make 8 bit mode the default
799  Program fancontrol: Improvements, fixes, support 2.6 kernels
800  Program mkpatch: Add lm75.h
801  Program pwmconfig: Improvements, fixes, support 2.6 kernels
802  Program sensors: Add ASB100 support
803  Program sensors-detect: Add 8712 Super I/O detection;
804                          add W83L785TS detection
805
806
8072.8.2 (20031211)
808  IMPORTANT: Limit initialization removed from all chip drivers!
809             If you didn't run 'sensors -s' in the past you may need to now!
810  File sensors.conf.eg: Change lm75 scaling back to 1;
811                        Add example for asb100
812  Library: Fix bmcsensors scaling, increase number of sensors;
813           Add w83627thf support; Advance version to 3.0.0;
814           Add hermes, ADM1032, ASB100 support;
815           Add it87 sensor type support;
816           Add sysfs support for kernel 2.6;
817           Fix memory leaks
818  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
819             Fail if no kernel .config file exists;
820             Don't build module dependencies for user and user_install
821  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
822          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
823          smsc47m1, thmc50, via686a, w83627hf, w83781d:
824          Remove initialization of limits by driver.
825  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
826  Modules (chip): Init cleanups
827  Module asb100: New
828  Module bmcsensors: Fix voltage scaling, voltage and fan limits
829  Modules ddcmon, eeprom: Add failure printks
830  Module fscher: New (Fujitsu-Siemens Hermes driver)
831  Module i2c-amd756: Fix AMD8111 support
832  Module i2c-amd8111: Fix byte writes
833  Module i2c-nforce2: Fix byte writes
834  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
835  Module i2c-sis630: Sync with 2.6.0-X driver version
836  Module i2c-viapro: Add support for Via 8237
837  Module it87: Add pwm and "smart guardian" support;
838               add it87 sensor type support
839  Module lm75: Fix negative voltages
840  Module lm90: Add ADM1032 support
841  Module w83781d: Fix 791d and 627hf detection
842  Module w83627hf: Add VID support
843  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
844  Program eeprog: New
845  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
846                                       support sysfs for i2c bus search
847  Program i2cdetect: Add -l option to list busses
848  Program i2cdump: Add 'c' mode for consective address reads
849  Program mkpatch: Cleanups
850  Program pwmconfig: Handle multiple fans controlled by a single pwm
851  Program sensord: Remove ddcmon support
852  Program sensors: Add ADM1032 support; add messages for sysfs
853  Program sensors-detect: Prefer Super I/O drivers;
854                          Fix W83627HF and W83791D detection; detect CSB6;
855                          Detect ADM1029, ADM1030, ADM1031;
856                          Detect W83637HF, W83697UF;
857                          Add it87 sensor type support; add sysfs support
858                          Reduce lm80 misdetects; remove PCFxxxx "detection"
859                          Detect VT8237 (KT600)
860                          Use VPD instead of DMI+ACPI for Thinkpad detection
861                          Suggest new asb100 driver instead of w83781d
862
863
8642.8.1 (20031005)
865  NOTE: Requires i2c-2.8.1 or newer!
866  File sensors.conf.eg: Improved adm1025 section
867                        Default temp labels for as99127f
868                        Improved lm83 section
869                        Better support for Asus A7V8X-X
870  File doc/chips/SUMMARY: Add SMSC manufacturer ID
871  File doc/chips/adm1025: Add decent documentation (almost new)
872  File doc/chips/lm83: Known motherboards list update, misc updates
873  Library: Change adm1025 names (hyst/over become low/high)
874           Swap adm1025 temp1 and temp2 to match the driver's order
875           Advance version to 2.0.1
876           Update lm83 support
877           Add support for lm90, xeontemp, max6650
878           Add separate messages for read and write errors
879           Add missing message for parse error
880  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
881  Modules (various): Fix includes for compilation on Alpha
882                     Use the new i2c_delay function instead of the various
883                     do_pause functions
884  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
885  Module i2c-nforce2: Cleanups
886  Module i2c-i810: Use readl/writel for portable access to PCI memory
887  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
888  Module i2c-savage4: Use readl/writel for portable access to PCI memory
889  Module i2c-sis630: Fix detection
890                     Add block data read/write support
891  Module i2c-sis645: Detection method change/bugfix
892  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
893  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
894  Module adm1025: Major driver update
895                  Add support for Philips NE1619
896                  Simplify the driver a lot (unified voltages, unified
897                  temperatures and much more)
898                  Fix default voltage limits
899                  Change default temperature limits
900                  Swap remote and local temperatures to match the internal
901                  registers order (make the code unification possible)
902                  Export remote diode fault through alarms
903  Module ddcmon: Major update
904                 Add half a dozen new features
905                 Add checksum parameter (same as for the eeprom module)
906                 Fix monitor limits
907  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
908  Module lm78: Fix a fan_div/fan_min bug
909  Module lm83: Add t_crit and alarms support
910  Module lm90: New
911  Module max6650: New
912  Module saa1064: New
913  Module smsc47m1: Add support for 47M142
914  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
915                   enhance w83627thf support
916  Module w83781d: Enhance chip detection; clean up error returns;
917                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
918  Module xeontemp: New
919  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
920                           Mark Rambus as unsupported
921  Program decode-edid.pl: New
922                          Interfaces between our eeprom module and
923                          parse-edid from the read-edid project
924  Program p4b_smbus: Fix SMP compilation
925  Program sensord: Add support for IT87 (Mike Black)
926                   Change ADM1025 support to match the changes made to
927                   the library
928  Program sensors: Rewrite and enhance EEPROM support
929                   Change LM83 and ADM1025 support to match the changes
930                   made to the library
931                   Add DRDRAM support to print_eeprom
932                   Exit(1) on /proc write failure (Malte Starostik)
933                   Add LM90, MAX6650 support
934  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
935                          Add support for LM82, LM86, LM89
936                          Improved W83781D family detection
937                          Add support for AS19927F rev.2, ASB100 Bach
938                          Add support for Asus Mozart-2 (3 types)
939                          Add support for NE1619
940                          Add support for FSC Hermes
941                          Make sure /sbin is in the user's path
942                          Fix EEPROM detection
943                          Automatic module.conf and /dev/i2c* detection
944                          Improve LM82 and LM83 detection
945                          Handle "to-be-written" cleanly
946                          Add detection for 47M14x Super I/O
947                          Handle the one-address-many-chips-same-driver
948                          case
949
950
9512.8.0 (20030714)
952  NOTE: Requires i2c-2.8.0 or newer!!!
953  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
954                  2.4.13 or later required for mkpatch.
955  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
956                  i2c package
957  File doc/chips/fscscy: Add watchdog documentation
958  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
959  File sensors.h: Now automatically generated
960  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
961           add adm1026, lm83, lm85, w83791d support;
962           Advance version to 2.0.0
963  Makefiles: Generate warnings if new library won't be found by ld.so;
964             Modules now install in kernel/drivers/i2c/[busses,chips];
965             Ensure that headers in /usr/local/include are used first;
966             Don't use /usr/include headers for modules;
967             Handle multiple UTS_RELEASE definitions in linux/version.h;
968             Automatically generate kernel/include/sensors.h;
969             Remove old gzipped modules; remove old misc directory if empty;
970             Remove pre-2.4 installation method;
971             -Wall now the default;
972             Add new targets user, user_install, and help;
973             Run depmod after module installation
974  Modules (all): Cleanups including
975                - Add #include <i2c-proc.h>
976                - C99 initializers
977                - Remove #ifdef MODULE
978                - Remove #ifndef THIS_MODULE
979                - Remove #ifndef MODULE_LICENSE
980                - Remove other 2.1/2.2 #ifdefs
981                - Remove #include "sensors.h", copy SYSCTL defs to module
982                - Remove excess #includes
983                - Remove argument in i2c_register_entry()
984                - Remove dummy xxx_command() definition
985                - Remove EXPORT_NO_SYMBOLS
986                - Remove init_MUTEX #define
987                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
988                  no longer adjust their own refcounts
989                - Use module_init() and module_exit()
990                - Update to new i2c_driver struct definition
991  Modules (bus PCI): Convert to PCI-module-style initialization
992  Modules (several): Add support for AMD Opteron VRM (VID) encoding
993  Module adm1021: Set alarm on failed reads and report old value;
994                  merge changes from kernel 2.5.54
995  Module adm1026: New
996  Module bmcsensors: Fix compile when DEBUG=1
997  Modules ddcmon, eeprom: Use i2c block reads if possible;
998                          better error handling
999  Module ds1307: Add to Makefile
1000  Module gl520sm: Fix temperature over/hyst writes
1001  Module lm75: merge changes from kernel 2.5.54
1002  Module lm83: New
1003  Module lm85: New
1004  Module i2c-ali1535: Check for invalid transaction
1005  Module i2c-ali15x3: Check for invalid transaction
1006  Module i2c-amd756: merge changes from kernel 2.5.54;
1007                     check for invalid transaction
1008  Module i2c-amd8111: merge changes from kernel 2.5.54
1009  Module i2c-i801: Add support for 82801EB (ICH5)
1010  Module i2c-i810: Fix for some chips
1011  Module i2c-nforce2: New
1012  Module i2c-piix4: Check for invalid transaction
1013  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1014  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1015        north bridges; SiS962 and SiS963 south bridges
1016  Module i2c-viapro: Check for invalid transaction
1017  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1018          pwm and pwm enable support; update docs
1019  Module smbus-arp: Check adapter for HW or SW PEC support;
1020                    add reset option
1021  Module w83781d: Add support for w83791d
1022  Module w83627hf: New
1023  Program decode-dimms.pl: Recognize DDR and Rambus
1024  Program eeprom: Fix writes for small eeproms
1025  Program eeprom, eepromer: Use local i2c-dev.h for build
1026  Program fancontrol: New
1027  Program lm_sensors.init: Call sensors -s in start()
1028  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1029                   Add adm1026,lm85 support;
1030                   Remove sensors.c file; add sensors_compat.h;
1031                   Remove patches to i2c-core.c and drivers/char/mem.c;
1032                   Now works only for kernels 2.4.13 or later
1033  Program p4b_smbus: Fix 'make install';
1034                     Install in same place as other modules;
1035                     Clear correct bits in config word
1036  Program pwmconfig: New
1037  Program sensors: add adm1026, lm85, w83791d support
1038  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1039                          w83627hf, w83627thf, w83697hf);
1040                          Add support for SiS651, SiS961, SiS745, SiS746;
1041                          Support dmidecode 2.0 and later;
1042                          Fix "C" format error;
1043                          Add support for adm1026, 82801EB (ICH5), W83791D;
1044                          Add support for w83l785ts, nForce2;
1045                          Fix UTF-8 incompatibility;
1046                          Better support for lm75;
1047                          Add support for lm83
1048
10492.7.0 (20021208)
1050  NOTE: Requires i2c-2.7.0 or newer.
1051  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1052  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1053  File doc/busses/i2c-sis645: Add license
1054  File doc/chips/lm92: Add license, features
1055  File doc/chips/maxilife: Add license, parameters, features
1056  File doc/chips/smartbatt: Complete rewrite
1057  File doc/chips/vt8231: Add license, parameters
1058  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1059  Library: Add support for MC1066; add multiple VRM version support for lm87;
1060           enhance adm1023 support; initial support for Sony Vaio eeprom;
1061           add support for bmcsensors; add hacks for additional dummy drivers
1062  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1063            add flags for x86_64 compiles
1064  Module adm1021: Add support for MC1066
1065  Module bmcsensors: New
1066  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1067                   kernel 2.5.43; fix 2.2 kernel compiles
1068  Module gl518sm: Iterate allowed only for rev 0x00
1069  Module i2c-amd756: Configure base address for nForce support;
1070                     check for uninitialized base address;
1071                     add support for amd8111 (SMBus 1.0)
1072  Module i2c-amd8111: New (SMBus 2.0)
1073  Module i2c-ipmb: New
1074  Module i2c-ipmi: New
1075  Module i2c-keywest: Sync with kernel 2.4.20
1076  Module i2c-sis630: Add support for SiS730
1077  Module i2c-sis645: Improve support for SiS645/961;
1078                     add support for SiS645DX/961 and SiS735;
1079                     fix 2.2 kernel compiles
1080  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1081  Module lm87: Add multiple VRM version support
1082  Module vt1211: Fix inx limits and alarms; fix in0
1083  Module vt8231: Fix inx limits and alarms; fix in0
1084  Module w83781d: Fix in0/in1 initialization
1085  Module smartbatt: New
1086  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1087  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1088                           stop decoding on checksum error
1089  Program dmidecode: Fix read bug; upgrade to version 1.8
1090  Program doc-insmod: Complete rewrite; fix author output
1091  Program doc-features: Complete rewrite; handle missing sysctl entries;
1092                        handle unknown prefix with suggestion
1093  Program lm_sensors.init: Remove spaces bug; add green/red output
1094  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1095  Program rrd: Add sanity limits to newly-created RRD.
1096  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1097  Program sensors: Add support for MC1066, Rambus Rimms;
1098                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1099                   initial support for Sony Vaio eeprom
1100  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1101                          IPMI, AMD8111; add help if no sensors found;
1102                          add ACPI method for IBM system detection;
1103                          work with old Perl versions again;
1104                          initial support for Sony Vaio eeprom
1105
11062.6.5 (20020915)
1107  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1108  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1109  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1110  Module dmi_scan: new
1111  Module ds1621: Fix enable/disable
1112  Module eeprom: Do not corrupt 24RF08's when checksum=1
1113  Module i2c-i801: Check for uninitialized base address;
1114                   enable if not enabled
1115  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1116  Module i2c-sis630: new
1117  Module i2c-sis645: new
1118  Module lm92: Fix in-kernel initialization
1119  Module via686a: Remove VT8231 support
1120  Module vt8231: new
1121  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1122  Program dmidecode: new
1123  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1124  Program mkpatch: Add Config.in entries for, lm92,
1125                   pcf8574, pcf8591, smsc47m1, vt1211;
1126                   add dmi_scan
1127  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1128  Program lm_sensors.init: fix stop()
1129  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1130                   add support for logging loadavg in RRD;
1131                   fix down-converting raw labels for RRD;
1132                   update chip support, still behind sensors
1133  Program sensors: Add /usr/local/etc to config file path;
1134                   fix -c and -u flags; add vt8231
1135  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1136                          refuse to run on IBM systems;
1137                          fix sysconfig module numbering;
1138                          change quick write to not corrupt 24RF08's
1139
11402.6.4 (20020719)
1141  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1142  File doc/vid: New
1143  File include/sensors_vid.h: New
1144  File sensors.conf.eg: Add vt1211, smsc47m1
1145  Library: Add multiple VRM version support for adm1025, w83781d;
1146           fix 'flex scanner jammed' on some systems;
1147           add vt1211, smsc47m1, lm92;
1148           fix access mode checking
1149  Makefiles: For 2.4+ kernels, modules now install in
1150             kernel/drivers/[i2c,sensors] , not misc/ , and
1151             'make install' removes old versions in misc/ .
1152             Use $CFLAGS and $CPPFLAGS if defined.
1153  Module adm1025: Add multiple VID version support
1154  Module ds1307: new
1155  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1156                     reliability improvements
1157  Module i2c-hydra: Flush posted writes
1158  Module i2c-i801: Add support for 82801DB (ICH4)
1159  Module i2c-i810: Flush posted writes
1160  Module i2c-savage4: new
1161  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1162  Module i2c-voodoo3: Flush posted writes
1163  Module ds1307: New
1164  Module lm92: New
1165  Module smbus-arp: new
1166  Module smsc47m1: new
1167  Module via686a: Add support for VT8231 sensors
1168  Module vt1211: new
1169  Module w83781d: Add multiple VID version support; fix temp alarms
1170  Program eeprom: new
1171  Program i2cdump: Add smbus block command specification, add PEC support
1172  Program lm_sensors.init: new
1173  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1174                   pcf8574, pcf8591, smsc47m1, vt1211
1175  Program p4b_smbus: Add support for ICH4
1176  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1177  Program sensord.init: Renamed, was prog/init/sensors
1178  Program sensord: Major update, now requires rrd source;
1179                   not compiled by default
1180  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1181                   (don't display algo. and adap.) option;
1182                   add vt1211, smsc47m1, lm92
1183  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1184                          add 82801DB, LM85; fix perl warnings;
1185                          generate /etc/sysconfig/lm_sensors for
1186                          lm_sensors.init script
1187
11882.6.3 (20020322)
1189  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1190  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1191  File doc/chips/it87: add more temp_type help
1192  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1193                        add adm1021 section; add lm87 AIN[1,2] template;
1194                        swap negative voltage limits for 782d,783s,627hf,
1195                        697hf,it87; add more it87 help; swap neg. voltage
1196                        limits for lm78(-j), lm79, w83781d, as99127f
1197  Library: Add PCF8591, W83697HF, ADM1023 support;
1198           fix w83* fan_min computes;
1199           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1200  Module adm1024: Add MODULE_LICENSE("GPL")
1201  Module bt869: Add s-video out and DVD resolution support
1202  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1203  Module fscscy: implement min/max for voltages and fans
1204  Module i2c-amd756: Add support for AMD768
1205  Module i2c-i810: Add support for 810E
1206  Module i2c-keywest: Big update, sync with kernel 2.4.18
1207  Module i2c-piix4: Check for uninitialized base address
1208  Module i2c-sis5595: Blacklist 645, 735
1209  Module i2c-viapro: Check for uninitialized base address
1210  Module gl518sm: Standardize /proc entries in0-3
1211  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1212               fan -> fan1; fix temp2 limit writes
1213  Module pcf8574: Add support for PCF8574A; /proc interface changed
1214  Module pcf8591: new
1215  Module sis5595: Blacklist 645, 735
1216  Module w83781d: Add W83697HF support; allow force_subclients parameter
1217                  for Tyan 2460
1218  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1219  Program decode-vaio.pl: new
1220  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1221                   add text output
1222  Program init/sensors: New SysV init script
1223  Program mkpatch.pl: Add support for fscscy, add more help entries
1224  Program p4b_smbus: new
1225  Program rrd: Install summ_week.cgi
1226  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1227                   clean up chassis intrusion prints
1228  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1229                          fix Via686a and it87 detection;
1230                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1231                          fix uninitialized values; it87 beats lm78
1232
12332.6.2 (20011118)
1234  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1235  Chip Modules (all): malloc.h -> slab.h
1236  Modules (all): Add MODULE_LICENSE("GPL")
1237  File doc/FAQ: More updates and additions
1238  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1239  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1240           update it87 alarm ID's.
1241  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1242  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1243  Module i2c-amd756: Improve busy handling/printk's
1244  Module i2c-i801: Add 82801CA/CAM support
1245  Module i2c-keywest: Sync with PPC people, it works now
1246  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1247  Module i2c-viapro: Add Via VT8233 support
1248  Module it87: Merge alarm_* /proc entries to alarms
1249  Module sis5595: Fix support for rev B0
1250  Module via686a: Make limit initializations reliable
1251  Module w83781d: Allow init=0 parameter to bypass initialization
1252  Program isadump: Add flat address space (PCI) support
1253  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1254                      fscpos, it87, maxilife, mtp008
1255  Program sensors: Fix w83781d temp precision
1256  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1257                          Fujitsu Poseidon and Scylla,
1258                          Intel 82443MX and 82801CA/CAM detection,
1259                          add ITE 8172G detection (driver in kernel 2.4.10)
1260
12612.6.1 (20010830)
1262  File BUGS: Updated
1263  File doc/FAQ: More updates and additions
1264  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1265  File sensors.conf.eg: Fix/enhance it87 section
1266  Library: ds1621 and it87 updates
1267  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1268  Module i2c-amd756: Add AMD 766 support
1269  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1270  Module i2c-piix4: Add Serverworks CSB5 support
1271  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1272  Module adm1025: Fixed temp2 min/max writes
1273  Module ds1621: Add 12-bit precision mode
1274  Module it87: Enable all alarms, add in8 support, add sensor type selection
1275  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1276                  remove support for module
1277  Module sis5595: Recognize unsupported chips and refuse to load
1278  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1279  Program eepromer: new
1280  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1281                      of sensors.c as a module in kernel
1282  Program sensors: it87 updates; adjust temp. precision for some chips
1283  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1284                          recognize unsupported SiS chips;
1285                          recognize AMD 766 and Serverworks CSB5.
1286
12872.6.0 (20010612)
1288  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1289        If your make fails because it can't find <linux/i2c-proc.h>, you
1290        forgot this step!!!
1291  File doc/FAQ: Many, many updates and additions
1292  File doc/busses/i2c-sis5595: new
1293  File doc/busses/i2c-tsunami: new
1294  File doc/chips/it87: new
1295  File doc/chips/via686a: Claim support for 686b.
1296  File README.thinkpad: new
1297  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1298                        Add lm87, adm9240, ds1780, lm81 templates;
1299                        Enhance help comments in file;
1300                        Add Tyan S2510 dual-MTP008 example;
1301                        Make separate sis5595 section.
1302  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1303  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1304  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1305           Add support for maxilife-nba and amd1024;
1306           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1307  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1308  Chip Modules (all): Change from sensors_* to i2c_* globals
1309                      for new i2c-proc.[ch]
1310  Makefiles: enhance to support Alpha architecture
1311  Module adm1021: Fix lm84 and gl523sm support
1312  Module adm1024: new
1313  Module i2c-i801: Chip detection cleanup
1314  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1315  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1316  Module i2c-tsunami: New
1317  Module i2c-via: Ensure i2c bus is tristated correctly.
1318  Module it87: new driver for IT8705, IT8712, Sis950 chips
1319  Module lm78: Recognize chipid=0x20
1320  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1321  Module mtp008: Fix temp initializations;
1322                 Save BIOS pin configuration of temps and fans;
1323                 Fix sensor type reads/writes and fan min writes;
1324                 Fix spurious invalid sensor type messages
1325  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1326                  used for patched kernel now.
1327                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1328  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1329                  Allow force_addr=0xaddr
1330  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1331  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1332                  reading changes; Add messages for subclient
1333                  registration failure
1334  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1335  Program i2cset: new
1336  Program isadump: fix for Alpha arch. compiles
1337  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1338                      Remove ltc1710; Fix i2c_sis5595 typo;
1339                      Support kernel 2.4.5 makefile change;
1340                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1341  Program sens_update_rrd: new
1342  Program sensord: Add -d (debug) and -p (pid-file) options
1343  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1344                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1345                   Change mtp008 temps from max/min to limit/hyst;
1346                   Add maxilife-nba, adm1024, it87 support.
1347  Program sensors-detect: Recognize lm78 with chipid=0x20;
1348                          Recognize SMSC Victory66 South Bridge;
1349                          Add devfs /dev/i2c/x support;
1350                          Add adm1024, it87xx support; Add thinkpad warning.
1351  Program tellerstats: new
1352
13532.5.5 (20010115)
1354  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1355        you have kernel 2.4.0-prerelease or greater.
1356  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1357  File doc/developers/proc: new
1358  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1359  Library: Add ds1621, mtp008 support
1360  Module adm1021: Add support for adm1021a / adm1023
1361  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1362  Module adm1025: Add support for remote temp; rename /proc entries to
1363                  in[0-5] and temp[1-2]; fix negative temp readings
1364  Module adm9240: Rename /proc entries to in[0-5]
1365  Module ddcmon: allow force and force_ddcmon parameters
1366  Module ds1621: new
1367  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1368  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1369  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1370  Module lm87: cleanup, update voltage calculations
1371  Module mtp008: new
1372  Module pcf8574: change update time to 5 seconds
1373  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1374  Module w83781d: fix beep setting via /proc
1375  Programs editticket, readticket: new
1376  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1377  Program mkpatch.pl: more fixes; now adds many more modules
1378  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1379                   add adm1025 temp2; report temp limits correctly as
1380                   min/max or limit/hysteresis; print message if no
1381                   sensors are found. Removed false errors from lm87 reads.
1382  Program sensors-detect: Add ds1621, mtp008 detection;
1383                          add ServerWorks detection
1384
13852.5.4 (20001012)
1386  Module i2c-viapro: Add support for Via 596B (0x3051)
1387  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1388  Program mkpatch.pl: fixed infinite loop
1389  Program sensors-detect: Detect Via 596B (0x3051)
1390
13912.5.3 (20001008)
1392  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1393  File useful_addresses.html: update
1394  Library: Add lm87 support
1395  Module pcf8574: new
1396  Module i2c-ali1535: new
1397  Module i2c-ali15x3: removed force #ifdef.
1398  Module i2c-i801: support Intel 82801BA (815E chipset)
1399  Module i2c-i801: add i2c block write support, fix smbus block bugs
1400                   (requires i2c 2.5.3 package)
1401  Module i2c-i810: support Intel 82815
1402  Module lm87: new
1403  Module sensors: Fix for kernel 2.4.0-test8
1404                  (remove copy_to_user_ret and put_user_ret)
1405  Module w83781d: limit fan divisors to 8 max. for as99127f
1406  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1407  Program i2cdump: Add smbus block read support
1408  Programs i2cdetect, i2cdump: Improve error reporting
1409  Program sensors: new switch -u (--unknown)
1410  Program sensors-detect: detect Intel 82801BA (815E chipset)
1411  Program sensors-detect: detect Intel 82815
1412  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1413  Program sensors-detect: detect National LM87
1414  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1415  Program sensors-detect: Improve error reporting
1416
14172.5.2 (20000709)
1418  File sensors.conf.eg: Fix lm80 in8 calculation
1419  Module w83781d: W83783S no longer crashes on unloading
1420  Program sensors-detect: more robustness in case of unknown i2c adapters
1421  Program sensors-detect, libsensors: fix eeprom size reporting
1422  Program sensord: more flexibility, support for alarm scanning etc.
1423  Program sensors: support for ignore setting on sensor alarms.
1424  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1425
14262.5.1 (20000618)
1427  Library: Add adm1025 support
1428  Module adm1025: new
1429  Module ddcmon: Fixed bus scan which could hang SMBus
1430  Module i2c-keywest: new
1431  Module maxilife: Add support for Maxilife '99 (NBA)
1432  Module via686a: Enable sensors if not enabled by BIOS
1433  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1434  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1435  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1436  Module w83781d: Fis as99127f fan speed (was 66% too high)
1437  Module w83781d: Improve beep input checking
1438  Program i2cdump: Add Winbond-style bank selection
1439  Program isadump: Add Winbond-style bank selection
1440  Program sensors: Add adm1025 support.
1441  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1442  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1443  File sensors.conf.eg: Add Maxilife '99 entries
1444  File sensors.conf.eg: Remove some as99127f entries.
1445    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1446          won't reinstall it) or else 'sensors -s' will fail.
1447
14482.5.0 (20000312)
1449  Dropped all kernel 2.0 and 2.1 compatibility
1450  Module i2c-i810: new
1451  Module ddcmon: new
1452  Module via686a: new
1453  Module i2c-amd756: fixed region request
1454  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1455  Module w83781d: Don't change pin settings at initialization;
1456                  also fix chip detection.
1457  Library: Support for ddcmon and via686a
1458  Program sensors-detect: Support for ddcmon and via686a
1459  Program sensors: Support for eeprom, ddcmon and via686a
1460
14612.4.5 (20000116)
1462  Introduced DESTDIR installation prefix
1463  Module lm80: fixes, temperature now read and set correctly
1464  Module i2c-voodoo3: driver enhancements
1465  Module w83781d: fixes, AS99127 works much better now
1466  Library: New ignore keyword in config file
1467  Programs: Support for new ignore keyword
1468  Program sensors-detect: Support for MGA detections
1469
14702.4.4 (19991201)
1471  Addition of the alpha release of AMD 756 SMBus host support.
1472  Many fixes and updates to the gl518sm driver
1473  Updates and fixes for device detection
1474
14752.4.0 (19990920)
1476  Too much to list.
1477  i2c and smbus parts are split off to a separate i2c package.
1478  New drivers and other stuff.
1479
14802.3.4 (19990616)
1481  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1482  All: Now compiles against kernel 2.0.x (again ;)
1483  Module gl518sm: some updates and refinements
1484
14852.3.3 (19990603)
1486  All: Now compiles against kernel 2.3.x (x >= 1)
1487  Module i2c-voodoo3: Timing issue fixes
1488  Module bt869: Seems to be functional and relatively well tested
1489  Many modules were modified to be more compatible with the new
1490   Mutex structure in the new experimental kernels.
1491
14922.3.2 (19990507)
1493  Module i2c-hydra: Now compiles on 2.0.x kernels
1494  Module i2c-lm75: Slightly better detection
1495  * New, but not compiled by default:
1496  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1497  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1498
14992.3.1 (19990501)
1500  All: Now compiles on PPC
1501  Module i2c-hydra: NEW
1502  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1503  Module w83781d: Removed deadlock (mutex was not initialized)
1504  Documentation: A few glitches removed
1505  Makefile: default module installation directory is now
1506            /lib/modules/current/extra/misc
1507  Program sensors-detect: PPC Hydra now detected
1508  Program sensors: Now prints complete GL518SM information
1509  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1510
15112.3.0 (19990422)
1512  All: Many, many changes and improvements
1513  All: Many small bugs and problems removed
1514  Modules: New insmod parameters
1515  Modules: Much improved chip detection
1516  Module maxilife: NEW
1517  Module adm1021: MAX1617A now also supported
1518  Module adm9240: DS1780 now also supported
1519  Module w83781d: W83782D and W83783S now also supported
1520  Program sensors-detect: NEW
1521  Library: All chips now supported
1522  Documentation: Very much improved
1523
15242.2.2 (199903??)
1525  Just some minor updates and bug fixes.
1526
15272.2.1 (19990218)
1528  All: Removed compile warnings
1529  Module i2c-dev: Small bug removed if DEBUG=1 was used
1530  Module sis5595: Now compiles for 2.0 kernels
1531  Module adm1021: Detection corrected
1532
15332.2.0 (19990216)
1534  All: Set copyrights to include 1999
1535  All: Small bugfixes
1536  I2C: Upgraded to newest archive of Simon Vogl
1537  Module i2c-dev: NEW
1538  Module i2c-ali15x3: NEW
1539  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1540     directories, and somewhat improved
1541  Module sis5595: NEW
1542  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1543  Library: Support for new chip drivers, several small bugs fixed
1544  Library manual pages: NEW
1545  Program i2cdetect: Moved to detect directory
1546  Program detect.pl: NEW
1547  Program doc-features: NEW
1548  Program sensors: Added man-page
1549  Document BUGS: Added cdrom bug and kernel i2c conflict
1550
15512.1.2 (19990116)
1552  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1553  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1554  Documentation in doc/kernel: NEW
1555
15562.1.1 (19990107)
1557  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1558                     and older
1559  Module gl518sm.o: Miscelaneous bugs and problems solved
1560  Program isadump: NEW
1561
15622.1.0 (19981230)
1563  Library: Completely NEW
1564  Program sensors: NEW
1565  Program grab_busses: NEW
1566  Program decode-dimms: More information
1567  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1568  Module w83781d.o: NEW
1569  Module lm80.o: NEW
1570  Module gl518sm.o: new procfile beep, several small updates
1571  Modules: Now use pin readings, no more scaling within the kernel (use the
1572           library instead)
1573
15742.0.2 (19981214)
1575  Module eeprom.o: NEW
1576  Program decode-dimms: NEW
1577  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1578           2.1.58
1579  Modules: Somewhat less verbose on transfers
1580  Module lm78.o now recognizes and handles lm78-j and lm79
1581
15822.0.1 (1998121?)
1583  Module gl518sm.o updates, to make it actually work
1584  Module lm75.o high/low-byte swapping write bug fixed
1585
15862.0.0 (19981209)
1587  Initial release
Note: See TracBrowser for help on using the browser.