root/lm-sensors/trunk/CHANGES @ 4307

Revision 4307, 76.5 KB (checked in by khali, 8 years ago)

sensors-detect: Add VIA CX700 south bridge detection. It appears to
be compatible with the other recent VIA south bridges SMBus. No
datasheet though.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  Program sensors-detect: Only probe relevant I2C addresses
6                          Drop ARP-capable device detection
7                          Add Maxim MAX6655/MAX6656 detection
8                           (Olexiy Avramchenko)
9                          Add VIA CX700 detection
10
11
122.10.2 (20070115)
13  RPM: Obsolete, removed
14  File doc/fan-divisors: Update
15  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
16  Library: Add support for the pc87247 driver (fans only)
17           Probe for busses before chips
18           Drop support for algorithm names
19           Add support for coretemp driver   
20           Major update/optimization of config-file scanner
21           Add config-file scanner regression tests
22           Add f71872f support
23           Add w83627dhg support (David Holl, #2157)
24           Get the i2c adapter names from classdev.name
25           Add adm1029 support (Corentin Labbe)
26  Man page i2cdetect.8: Describe the output convention
27  Man page sensors.1: Update (option -c) and clean up
28  Module bmcsensors: Fix several warnings
29                     Fix fragile structure initialization
30  Module i2c-i801: Add ICH9 support
31  Module p4b_smbus: Add support for the ICH5
32  Module f71805f: Fix the device address decoding (2.6 backport)
33  Module icspll: Delete. It was useless and dangerous.
34  Program decode-dimms.pl: Remove spaces at end of lines
35  Program eepromer: Fix loads of warnings
36  Program i2cdetect: Make the output clearer
37  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
38  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
39                            without need of recompilation.
40  Programs dump/*: More robust handling of user inputs
41  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
42                                  Add support for non-i2c drivers
43  Program fancontrol.pl: Disable debugging by default
44                         Add support for non-i2c drivers
45                         More tolerant config file parsing
46  Program sensord: Add pc87247 support (fans only)
47                   Add vt1211 support (#2150)
48                   Add w83627dhg support (David Holl, #2157)
49                   Add w83627ehf voltage support (Dave Platt)
50                   Add k8temp support (Dave Platt)
51  Program sensors: Add pc87247 support (fans only)
52                   Hide error on missing f71805f fan
53                   Handle option -c more efficiently
54                   Drop option -a (show algorithm names)
55                   Add f71872f support
56                   Add w83627dhg support (David Holl, #2157)
57                   Add adm1029 support (Corentin Labbe)
58                   Hide error on missing w83793 temp (Gong Jun)
59  Program sensors-detect: Add SMSC DME1737 detection
60                          Add Fintek F71882FG and EPoX EP1308 detection
61                          Add Intel Core thermal sensor detection
62                          Preallocate memory for I2C_FUNCS ioctl (#2138)
63                          Prevent misdetection of MAX6633/MAX6634/MAX6635
64                          Add Intel ICH9 detection
65                          Add Maxim MAX6648/MAX6692 detection
66                          Improve ADM1029 detection
67                          Add Andigilog chips detection
68                          Add Intel AMB FB-DIMM thermal sensor detection
69                          Add ATI SB600 detection
70
71
722.10.1 (20060924)
73  File doc/developers/checklist renamed to dev/developers/release_checklist
74          with clarifications and updates for new SVN server.
75  File README.package: Delete.
76  File doc/busses/i2c-piix4: Update (2.6 backport)
77  File doc/developers/sysfs-interface: Update
78  File etc/sensors.conf.eg: Add an smsc47m192 section
79                            Comment out all set statements
80                            Add an it8716 section
81                            Add a w83793 section
82                            Adjust the vt1211 section to match the new driver
83                             interface
84  Library: Fix device scan when no i2c support is present
85           Add support for W83627EHF voltage inputs and alarms
86           Add support for the smsc47m192 driver
87           Fix all memory leaks (yeah!)
88           Fix no sensors being reported as an error
89           Add support for the IT8716F and IT8718F chips
90           Add support for the W83793 chip (Yuan Mu)
91           Map the 2.6 adm1026's fan8 to fan0
92           Missing sysfs busses and classes are not errors
93           Change vt1211 temp3-7 magnitude from 1 to 3
94  Makefile: Don't grep autoconf.h on user-space targets
95            Fix depmod on non-running kernel version
96            Remove empty include directories on make user_uninstall
97  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
98  Module i2c-amd756-s4882: Improve static semaphore initialization
99                           (2.6 backport)
100  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
101                   Add ICH8 support (2.6 backport)
102                   Fix block transaction poll loops (2.6 backport)
103                   Remove PCI function check (2.6 backport)
104                   Cleanups (2.6 backport)
105  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
106  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
107                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
108                    Drop the fix_hstcfg parameter (2.6 backport)
109  Module i2c-viapro: Fix compilation with kernels < 2.4.21
110                     Add VT8237A and VT8251
111  Module lm83: Add LM82 support (2.6 backport)
112  Module vt1211: The VT1211 has no in6
113                 Rework the voltage and temperature conversions and the
114                  temperature input order to match the Linux 2.6 driver
115  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
116                  Add specific alarm and beep defines for the W83791D
117  Module w83792d: Fix PWM range (2.6 backport)
118  Program decode-dimms.pl: Decode depending on the memory type
119                           Decode the manufacturing date to an ISO8601 date
120                           Add the memory size computation and provide brief
121                            timing characteritics for SDRAM/DDR/DDR2 memory
122                           Add memory size computation for Rambus memory
123                           Various output cleanups and fixes
124  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
125  Program decode-vaio.pl: Detect and skip false positives
126  Program i2cdetect: Add a mode to print adapter functionalities
127  Program i2cdump: Restore bank after bank switching
128                   Add new mode W (read word on even register addresses)
129  Program mkpatch: Fix typo breaking f71805f
130                   Turn warnings on (-w), and fix them
131                   Print a usage message on missing command line parameters
132  Program pwmconfig: Use mktemp instead of tempfile
133  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
134                   Add smsc47m192 support
135                   Add abituguru support (Hans de Goede)
136                   Fix memory leak when printing an unknown chip
137                   Add it8716 and it8718 support
138                   Make each it87 fan and fan div optional
139                   Print missing w83791d values
140                   Add w83793 support (Yuan Mu)
141                   The adt7463 may not have in4 (#2119)
142                   Hide more vt1211 missing input errors
143                   Clearer error messages when no sensors found
144  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
145                          Add ATI IXP200/300/400 SMBus detection
146                          Prevent warning on 64-bit PCI addresses
147                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
148                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
149                           F75384S/M, F75387SG/RG and F81218D detection
150                          Add Winbond W83793R/G and W83627DHG detection
151                          Handle the W83791D driver difference between kernels
152                          Add nForce4 MCP04, MCP51 and MCP55 detection
153                          Add AMD Geode devices detection
154                          Add ITE IT8716F and IT8718F detection
155                          Add NatSemi/Winbond PC87427 detection
156                          Get driver information for busy addresses from
157                           sysfs (2.6 only)
158                          Drop the ISA IT87xxF detection
159                          Check i2c adapter functionalities before probing
160                          Add Intel ICH8 SMBus detection
161                          Add AMD K8 thermal sensors detection
162                          Simplify detection of SiS5595, VIA686 and VT8231
163                          Add Analog Devices ADM1033, ADM1034, ADT7462,
164                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
165                          Check for root user at startup
166                          Attempt to be slightly more user-friendly
167                          Add VT8237A and VT8251
168                          Remove detection of nVidia graphics adapters
169                          Use sysfs for PCI device enumeration
170                          Add generic PCI SMBus adapter detection
171                          Add generic Super-I/O logical device detection
172                          Add SMSC LPC47M172/182 detection
173
174
1752.10.0 (20060214)
176  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
177  File doc/busses/i2c-viapro: Update (2.6 backport)
178  File doc/chips/via686a: Update (2.6 backport)
179  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
180  File etc/sensors.conf.eg: Do not set vrm by default
181  File i2c-dev.h: Fix union i2c_smbus_data definition
182                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
183                  Add missing parentheses around macros
184                  Drop I2C_FUNC_SMBUS_EMUL
185                  Drop I2C_FUNC_SMBUS_*_PEC
186                  Drop I2C_SMBUS_*_PEC
187  File sensors_vid.h: Drop default VRM
188  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
189           This is intentional.  Use decode-dimms.pl if you still
190           need your memory SPD data.
191  Library: Big update to use libsysfs.  More TODO though.
192           Fix bus matching code for Linux 2.6 (Karsten Petersen)
193           Add f71805f, w83687thf support
194           Add platform drivers support
195           Fix sysctl warnings on x86_64
196           Restore vt1211 temp1
197  Makefile: Compile user-space programs with -Wundef
198  Module i2c-i801: Simplify the hardware PEC code
199                   Always set PEC mode explicitly before each transaction
200  Module i2c-i810: Documentation update, PCI IDs cleanup
201  Module i2c-keywest: Remove bus probing code (2.6 backport)
202  Module i2c-nforce2: Remove dead code (2.6 backport)
203                      Add the ID of the nForce4 MCP-04 (2.6 backport)
204  Module i2c-via: Remove dead code
205  Module i2c-viapro: Remove dead code
206                     Support I2C block read (2.6 backport)
207                     Code cleanups (2.6 backport)
208                     Improve debug register dump (2.6 backport)
209  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
210          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
211          i2c-sis645: Use pci_driver name to request I/O region; do
212                      not initialize i2c_adapter name to "unset" (2.6
213                      backport)
214  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
215                                              (2.6 backport)
216  Module adm9240: Cleanups (2.6 backport)
217  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
218  Module it87: Minor cleanups
219               Fix fan3_div setting bug (Anton V. Staaf)
220  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
221               Separate the register read function
222               Add PEC support for the ADM1032
223  Module via686a: Cleanups
224  Module w83627hf: Drop useless initialization step (2.6 backport)
225                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
226                   Fix alarms (Yuan Mu)
227                   Preserve fan min on fan div change (Yuan Mu)
228                   Properly handle W83627THF without VID (Yuan Mu)
229                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
230                   Add W83687THF support
231  Module w83781d: Drop W83697HF support (Grant Coady)
232  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
233                  Fix fan control mode (PWM/DC) reporting
234                  Fix fan div auto-adjust (Yuan Mu)
235                  Fix the subclient handling
236  Module w83l785ts: Minor cleanup (2.6 backport)
237  Module vt1211: Restore temp1
238  Modules vt1211, vt8231: Change default VRM to 9.1
239  Program decode-dimms.pl: Add lookup tables for manufacturer names
240                           Fix rounding error in PCxxxx speed computation
241                           Improve text output
242                           Improve speed under Linux 2.6
243                           Verify checksum before decoding anything
244                           Improve manufacturing location decoding
245                           Improve memory type detection
246                           Improve part number decoding
247  Program i2cdump: Drop now useless #ifdef tests
248                   Fix capability check for continuous byte mode
249  Program i2cget: New
250  Program i2cset: Add PEC support
251                  Fix argc check
252  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
253                                       Print the correct bus type if bus
254                                       functionality can be queried
255  Program isadump: Display the real addresses in flat mode
256  Program mkdev.sh: Silently skip already existing nodes
257  Program mkpatch: Include f71805f
258  Program sensord: Do not log algorithm names
259                   Drop EEPROM support (Aurelien Jarno)
260                   Add W83627EHF, F71805F/FG support
261                   Fix PC87365/PC87366 alarms
262  Program sensors: Drop free_the_label
263                   Fix compilation with uclibc (no iconv)
264                   Add f71805f, w83687thf support
265  Program sensors-detect: Drop algorithm names
266                          Do not rely on i2cdetect -l printing algo names
267                          Simplify adapter name matching mechanism
268                          New address for ADM1032, ADT7461
269                          Improve ADT7467, ADT7468 support
270                          Fix MAX6659 reported driver
271                          Add Fintek F71805F detection
272                          Add Analog Devices ADT7476 detection
273                          Add Intel 82845G detection
274                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
275                          Fix udev detection in some corner case
276                          Improve DS1621 detection
277                          Always prefer ISA access over SMBus access
278
279
2802.9.2 (20050906)
281  File doc/chips/*: Big update (2.6 backport)
282  Library: Drop ds1780-specific code (now use adm9240)
283           Fix memory leak in sensors_get_label()
284           Support /sys/class/hwmon (Linux 2.6.14+)
285           Limit stack usage in sensors_read_proc_chips()
286  Makefile: Detect 2.6+ kernels and check targets
287  Man page isaset.8: Fix typos
288  Module adm1031: Fix broken kfree() calls
289  Module i2c-ali1563: New (2.6 backport by Winbond)
290  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
291  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
292          w83627hf.c: Tag find function __init
293  Module lm93: Fix memory leak
294  Module smsc47m1: Fix PWM enable polarity on read
295  Modules w83627hf, w83781d: Allow setting fan divisor to 128
296  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
297                           Added DDR/DDR2 frequency reporting in convenient
298                           form of DDRxxx PCyyyy
299  Program i2cdump: Properly handle short i2c block reads
300  Program fancontrol.pl: Fix compile errors
301  Program mkpatch: Include i2c-ali1563
302                   Include w83792d
303  Program pwmconfig: Fix unsafe temporary file use
304  Program rrd: Support 2.6 kernels
305  Program sensord: Add support for w83637hf
306                   Support pc87360 (Henrik Brix Andersen)
307  Program sensors: Support the VAIO "VGN" prefix for eeprom
308  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
309                          Advertise the w83792d driver
310                          Improve IT8705F and IT8712F detection
311                          Merge LM82 and LM83 detection
312                          Add W83687THF detection
313
314
3152.9.1 (20050412)
316  File doc/busses/i2c-nforce2: Update
317  File doc/chips/it87: Update
318  File doc/chips/lm90: Update for adt7461
319  File doc/chips/mic74: New
320  File etc/sensors.conf.eg: New sections for lm92 and w83792d
321  Library: Add support for 2.6 fscpos driver (Stefan Ott)
322           Fix sis5595 in4 (Aurelien Jarno)
323           Add support for 2.6 gl520sm driver (Maarten Deprez)
324           Add support for 2.6 bmcsensors driver (Yani Ioannou)
325           Add support for w83792d (Chunhao Huang/Winbond)
326           Add support for 2.6 adt7461 (James Chapman)
327           Add support for 2.6 lm92
328           Add support for 2.6 vt1211
329           Add preliminary support for 2.6 w83627ehf
330  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
331            Use -fno-strict-aliasing on all architectures
332  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
333  Module bmcsensors: Fix compile error
334                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
335  Module ds1621: Fix detection (Aurelien Jarno)
336  Module eeprom: Discard SPD-centric checksum module parameter
337                 Cleanup detection function (backport from Linux 2.6)
338  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
339  Module i2c-i801: Temporarily disable broken I2C block read
340  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
341                   Gelato)
342  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
343  Module i2c-viapro: Prevent repeated resets
344  Module it87: Improve Super-I/O detection
345               Limit I2C address range
346               Support VID on the IT8712F
347  Module lm75: Only initialize CMP/INT bit
348  Module lm78: Fix bug with setting negative temperature limits
349  Module lm85: Properly differentiate between ADM1027 and ADT7463
350               Add EMC6D102 support
351  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
352               Add limited ADT7461 support
353  Module lm93: Fix IN10 (+5V) scaling
354  Module mic74: New
355  Module w83627hf: Support secondary Super-I/O address
356                   Enable temp2 and temp3 if they are disabled
357  Module w83781d: Revert AS99127F temp2 and temp3 computation change
358                  Skip final initialization step for AS99127F chips
359  Module w83792d: New (Chunhao Huang/Winbond)
360  Program ddcmon: New; user-space replacement for the ddcmon driver
361  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
362  Program isadump: Handle Super-I/O keys
363  Program lm_sensors.init: Cleanups (Axel Thimm)
364  Program mkdev.sh: Add basic command-line interface
365  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
366  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
367                     Don't complain about read-only enable files (lm85)
368                     Fix handling of alternate config file name
369  Program sensord: Fix erroneous error message (Aurelien Jarno)
370                   Support sis5595 in4 (Aurelien Jarno)
371                   Support w83627thf
372                   Support the separate it8712 prefix (Aurelien Jarno)
373  Program sensors: Display sis5595 in4 (Aurelien Jarno)
374                   No errors on missing pc87360 fans
375                   Add gl520sm support (Maarten Deprez)
376                   Improve vt1211 error/ignore handling (Michael Carland)
377                   Support w83792d, w83627ehf
378  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
379                          Improve IT8705F and IT8712F detection
380                          Improve udev detection
381                          Fix DS1621 detection
382                          Add W83627EHF detection
383                          Add ATI SMBus detection
384                          Add VT1211 alias detection
385                          Warn if chip modules not found
386                          Add i2c-ipmi to list if bmcsensors is on it
387                          Add PC87591 detection
388                          Search for correct udev db file name
389                          Add nForce3 250Gb and nForce4 detection
390
391
3922.9.0 (20041228)
393  NOTE: Requires i2c-2.9.0 or newer!
394  File README.thinkpad: Update
395  File doc/chips/it87: Cleanups
396  File doc/chips/lm63: New
397  File etc/sensors.conf.eg: Set via686a voltage limits
398  File kernel/chips/Module.mk: Resync module list with mkpatch
399  File kernel/include/sensors_compat.h: Define __devexit_p if missing
400                                        (kernels 2.4.16 and older)
401  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
402                             and dec_use removed in release 2.8.0
403  Modules (all chip drivers): Remove owner from i2c_driver; pass
404                              controlling_mod to i2c_register_entry() again
405  Module bmcsensors: Support function 1/x
406  Module i2c-amd756: Display the real bus name
407  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
408  Module i2c-i801: Support i2c block read (ICH5 and higher)
409                   Add PEC support for ICH6
410                   Add support for ICH7
411  Module i2c-ipmb: Remove from build since it doesn't work
412  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
413  Module icspll: Fix compilation
414  Module lm63: New driver for the National Semiconductor LM63
415  Module lm83: Use signed types for temperatures
416               Check limits on register writes
417  Module lm87: Round voltages properly
418               Retry on read errors (David Knierim)
419               Less agressive init (no reset)
420  Module lm90: Use signed types for temperatures
421               Check limits on register writes
422  Module lm93: Added module parameter for VID pin input thresholds.
423               Fix typo in dynamic VID alarms
424               Adds a couple log messages for failed transactions (David
425               Knierim)
426               Fix compilation breaking C99-ism (Axel Thimm)
427               Fix block read retries
428  Module pc87360: Support secondary Super-I/O address
429  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
430  Library: Add lm63 support
431           Add lpc47b397 support
432  Programs *.init: Rename lockfile to match file name
433  Programs i2cset, isaset: Written byte/word can be masked
434  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
435  Program mkpatch: Include i2c-amd756-s4882
436  Program pwmconfig: Handle new (well, back to old) pwm files names for
437                     Linux 2.6.10 and up
438  Program sensord: Do not scale load average (Aurelien Jarno)
439  Program sensors: Add lm63, lpc47b397 support
440                   Support DDR2 memory module EEPROMs (Rudolf Marek)
441                   Support only one location for the default configuration file
442                   Display the default configuration file location in --help
443                   Simplify the configuration file opening code
444  Program sensors-detect: Improve LM63 detection
445                          Discard IBM Thinkpad detection code
446                          Add PCA9556, LPC47B397, ICH7 detection
447                          Fix W83792D detection, add W83791SD detection
448
449
4502.8.8 (20041007)
451  File doc/donations: Update
452  File doc/lm_sensors-FAQ.texi: Add 4.6.1
453                                Update 4.7
454  File doc/chips/gl518sm: Update "iterate" info
455  File doc/chips/it87: Discard outdated module parameters
456  File doc/chips/lm75: LM77 is not supported
457  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
458  File doc/chips/lm93: New
459  File doc/chips/w83l785ts: Improvements
460  File etc/sensors.conf.eg: Fix it87 lines order
461                            Update lm87 section
462  File kernel/include/sensors_vid.h: Support VRM 10.0
463  Library: Support 2.6 adm1025
464           Preliminary support for 2.6 lm87
465           Support 2.6 adm9240
466           Allow an alternative sysfs file name for chip features (2.6)
467           Fix lm83 critical limits (2.6)
468           Add lm93 support
469           Prevent some procfs errors from being silently ignored
470  Makefiles: Implement user_uninstall (Rudolf Marek)
471             Spoof LOGNAME and HOSTNAME when making html man pages
472  Module adm1025: Refine detection
473                  Update limit registers again (revert of 2.8.1)
474                  Init high limits if they read 0
475                  Fix conversions
476  Module lm75: Refine detection
477  Module lm78: Fix init
478  Module lm83: Default to kind lm83 if forced.
479               Fix temperature macros.
480  Module lm90: Add LM86, MAX6657 and MAX6658 support
481  Module lm93: New
482  Module mtp008: Fix the setting of limits on temp2
483  Module pca9540: Refine detection
484  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
485                  Support VID
486                  Fix fan_div file when fan count is less than 3
487                  Additional init and debug
488  Module smsc47m1: Fix pwm_enable being inverted
489  Module w83627hf: Add alternate VCORE/in0 calculation method
490                   Remove reset of chip by driver on initialization
491  Module w83781d: Fix default VRM for w83791d
492  Module w83l785ts: Implement read error handling (backport from 2.6)
493  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
494                    Wait for user input to continue (as opposed to 5 sec
495                    delay), can be skipped with -y
496                    Various cleanups and code refactoring
497                    Update manual pages
498  Program fancontrol.init: New (Dean Takemori)
499  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
500  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
501                           (Giuseppe Della Bianca)
502  Program mkdev.sh: Detect devfs and refuse to run
503                    Use mknod's mode instead of chmod
504  Program mkpatch: Include xeontemp and pc87360
505  Program sensors: Rework adm1025 support
506                   Display pc87365/pc87366 VID
507                   Improve smsc47m1 support
508                   Hide 2.6 adm1027 alarm_mask being missing
509                   Print VRM version for all supported chips
510  Program sensors-detect: Support LM93, LM77, LM63
511                          Support PC8739x Super-I/O family (no sensors)
512                          Fix PCA9540 support
513                          Refine ADM1025/ADM1025A detection
514                          Refine LM75 detection
515                          Ignore missing /proc/modules (Andras Bali)
516                          Script-wide Perl cleanups
517                          Support udev
518                          Support W83792D, LM96000
519
520
5212.8.7 (20040611)
522  File README.thinkpad: Update 24RF08 status
523  File doc/fan-divisors: More info on accuracy
524  File doc/lm_sensors-FAQ.texi: Update 4.27
525  File doc/chips/adm1031: New
526  File doc/chips/max1619: New
527  File doc/chips/pc87360-fan: Renamed to pc87360
528  File doc/chips/pc87360: Big update
529  File doc/chips/w83781d: Update AS99127F documentation
530  File etc/sensors.conf.eg: Add comments about BP6 voltages
531                            Add comment on Asus A7V8X-X VCore
532                            Misc fixes to lm80 section
533                            Update via686a section
534                            New lm99 section
535                            Add section for LM85-like chips
536                            Preliminary pc87366 section
537                            Add comment on GL520SM application modes
538                            Document beep_enable (Aurelien Jarno)
539                            Preliminary max1619 section
540                            Preliminary adm1030 and adm1031 sections
541  Library: Fix 2.6 VRM
542           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
543           Fully support the PC87360 family
544           Support the lm99
545           Add version and date strings
546           Support 2.6 max1619
547  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
548  Man page i2cdetect.8: document new command line flags
549  Man page i2cdump.8: More details on how i2cdump can write to a chip
550  Modules (all chip drivers): Rework memory allocation scheme.
551  Module adm1031: New (Alexandre d'Alton)
552  Module bmcsensors: Fix oops by creating thread for initialization
553  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
554  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
555          asb100.c, lm92.c: Use swab16
556  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
557  Module gl520sm: Less agressive initialization process
558                  Fix temp1 limits being unsettable in application
559                  Ensure that temp2 and in4 are not used at the same time
560  Module i2c-i801: Support 6300ESB and ICH6
561  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
562  Module i2c-sis645: Add support for SiS655
563  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
564  Module lm90: Support LM99 and LM89
565  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
566               Get rid of useless i2c_probe call
567  Module max1619: New (Alexey Fisher)
568  Module p4b_smbus: Add support for mobile versions of the 82801
569                    (Axel Thimm)
570  Module pc87360-fan: Renamed to pc87360
571  Module pc87360: Also support PC87365 and PC87366
572                  Add write support
573                  Correctly set the chip name depending on the type
574                  Add voltage and temperature support
575                  Fix fan speed computation
576                  Retrieve fans configuration from Super-I/O space
577                  Export pwm_enable (read-only)
578                  Honor pwm invert bits
579                  Clear fan alarms after we read them
580                  Do not read fan data when monitoring is disabled
581                  Do not include SENSORS_INSMOD stuff
582                  New module parameter: init
583                  Fan clock dividers change automatically
584                  Add thermistor dupport
585  Module smsc47m1: Lock on reads and writes
586                   Various PWM fixes
587  Module thmc50: Fix address range
588  Module via686a: Fix voltage roundings
589                  Simplify temperature conversions
590  Module w83781d: Drop PWM support for as99127f
591                  Invert AS99127F beep bits in driver rather than user-space
592  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
593  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
594  Program fancontrol.pl: New
595  Program i2cdetect: Adapt probing method to address
596                     Add -q and -r flags to force probing methods
597                     Allow probing range selection
598  Program isadump: Major improvements
599  Program isaset: New
600  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
601                   module
602                   Include i2c-nforce2
603  Program sensord: New --rrd-no-average parameter
604                   Syncronize time slots with rrd
605                   Fix W83781D temp3 alarm (Aurelien Jarno)
606                   Add ASB100 support (Andrew May)
607  Program sensors: Fully support the PC87360 family
608                   Fix lm80 temperature alarms
609                   Support the lm99
610                   Do not invert AS99127F beep bits anymore
611                   Fix W83781D temp3 alarm (Aurelien Jarno)
612                   Print library version string
613  Program sensors-detect: Rework Super I/O detection
614                          Support SiS655/SiS96x
615                          Support ADT7461 and ADT7467
616                          Better support for ADM1027, ADT7460 and ADT7463
617                          Explicitly support ADM1028
618                          Scan all logical devices of PC87365 and PC87366
619                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
620                          Detect eeproms with software write protect (not
621                          enabled by default)
622                          Support ALi 1563 (2.6 only)
623                          Drop LTC1710 support
624                          Use byte reads for probing on ranges 0x30-0x37 and
625                          0x50-0x5F
626                          Improve LM89 and LM99 support
627                          Support GeForce FX 5900 video cards
628                          Fix devfs misdetection (Aurelien Jarno)
629                          Detect 6300ESB, ICH6
630                          Fix double detection of ISA chips
631                          Support MAX1619
632                          Support PC87373 Super-I/O
633                          Fix unknown adapters appearing multiple times
634                          Refine MAX6650/MAX6651 detection
635
636
6372.8.6 (20040405)
638  File README.thinkpad: Update status
639  File doc/chips/pca9540: New
640  File doc/chips/pc87360-fan: New
641  File etc/sensors.conf.eg: Update pcf8591 default configuration
642  Library: Switch to new sysfs naming standard
643           Fix gcc 3.3 warnings (Philipp Thomas)
644           Support 2.6 ds1621 and pcf8591
645           Change pcf8591 magnitudes
646           Support pc87360-fan
647  Makefile: Install shared library 755
648  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
649  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
650  Modules ds1621, pcf8591: Check for capabilities before using them
651                           (Aurelien Jarno)
652  Modules pcf8574, pcf8591: Cleanups
653  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
654  Module adm1021: Better detection and initialization
655  Module pca9540: New driver for the Philips PCA9540
656  Module pc87360-fan: New driver for the National Semiconductor PC87360,
657                      PC87363 and PC87364 Super I/O chips
658  Module smsc47m1: Support the LPC47B27x
659  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
660  Program i2cdetect: Skip special addresses by default
661  Program sensord: Prevent null pointer dereference (Tim Toohey)
662  Program sensors: Print the degree symbol in the terminal's current locale
663                   (Aurelien Jarno)
664                   Update pcf8591 print to support 2.6 driver
665                   Support pc87360-fan
666  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
667                          Improved SiS chips support
668                          Add a white list of IBM systems
669                          Drop support of undetectable adapters
670                          Fix smart battery detection
671                          Add smart battery charger and manager detection
672                          Rework adm1021 and clones detection
673                          The PC87360, PC87363 and PC87364 Super I/O chips
674                          now have a (preliminary) driver
675                          Rework Super I/O detection
676                          Better support of devfs
677  Program sensors-detect-stat.pl: New
678
679
6802.8.5 (20040305)
681  File doc/chips/SUMMARY: Update
682  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
683  Makefiles hotplug and rrd: Remove -o and -g arguments to install
684  Module bmcsensors: Increase max SDRs to 100
685  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
686  Module i2c-amd756: Don't register driver to avoid driver conflicts.
687                     (Daniel Rune Jensen)
688  Module it87: Better temperature sensor types handling (Takeru Komoriya)
689               Fix reset=1 (Takeru Komoriya)
690  Module lm80: Code cleanups
691  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
692  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
693  Module w83627hf: Add w83637hf support
694                   Fix exported name
695                   Fix PWM in w83627thf
696                   Preserve other bits when forcing temp2/3 to comparator mode
697  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
698                  Remove asb100 support
699  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
700          Define driver ID if i2c-id.h doesn't have it yet.
701  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
702          Backport oops fix from Linux 2.6.
703  Modules (all chips): Get rid of useless headers
704  Program decode-edid.pl: Add sysfs support
705  Program sensors: Add w83637hf support
706                   Add support for Shuttle Ethernet EEPROMs
707                   Drop 2.6 subclient detection
708  Program sensors-detect: Add heuristics to the LM80 detection function
709                          Add support for W83L785R, improve W83L784R/AR
710                          Add GeForce FX 5600 as supported by rivatv
711                          More Super IO chips, better handling
712  Library: Update to match renames in fscher
713           Reverse temporary changes to w83l785ts mappings
714           Fix vt1211 and vt8231 uch_config not being writable
715           Add 2.6 lm80 support
716           Add w83637hf support
717           Remove in6 and temp1 from vt1211 and vt8231
718           Add support for Shuttle Ethernet EEPROMs
719           Remove unused as99127f features
720
721
7222.8.4 (20040207)
723  File doc/lm_sensors-FAQ.texi: Update 4.20.
724  File doc/chips/it87: Change hyst to low
725  File doc/chips/w83l785ts: New
726  File etc/sensors.conf.eg: Change it87 hyst to low
727                            Fix w83697hf supposed to have temp3
728                            Limits initialization for adm1025/ne1619
729                            Handle fscher voltage conversions
730                            Add Tyan Trinity S2495 KT400 setup (Eric
731                              Schumann)
732                            Fix fscher fan labels (Reinhard Nissl)
733  Library: Better 2.6 eeprom support
734           Change it87 hyst to low
735           Add 2.6 gl518sm, fscher support
736           Fix 2.6 negative voltages handling
737           Temporary fix to w83l785ts mappings
738  Module adm1025: Separate prefix for NE1619
739  Module adm1026: Remove use of temporary ID
740                  Define addresses as a range
741  Module bmcsensors: Fix reservations
742  Module fscher: Externalize voltage conversions
743  Module eeprom: Remove memtype
744  Module i2c-piix4: Fix resource release error
745                    Various cleanups
746  Program decode-vaio.pl: Add sysfs support
747  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
748                   Drop linux 2.2 support
749                   Add w83627hf
750  Program sensors: Do not show algorithm by default
751                   Cleanup temperature unit display code
752                   Cleanup label spacing code
753                   Fix output to UTF-8 terms (Marcel Sebek)
754                   Simplify gl518sm print
755                   Do not ignore errors in FSC chips prints
756                   Fix w83l785ts print
757                   Cleanup FSC chips prints
758  Program sensors-detect: Fix PATH issues
759                          Correctly point to the fscher driver
760
761
7622.8.3 (20040115)
763  File lm_sensors.spec: Update
764  Library: Add 2.6 eeprom, lm90 support
765           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
766  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
767  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
768  Module i2c-amd756: Fix byte writes
769  Module i2c-tsunami: Cleanups (Daniel Nilsson)
770  Module it87: Fix sg_tlx writes; fix sensor type reporting;
771               add 8712 Super I/O detection;
772               remove initialization of temp_type and fan_ctl;
773               remove init and temp_type module parameters
774  Module lm90: Handle hysteresis differently
775  Module smartbatt: Fix detection, magnitudes, temp
776  Module w83781d: Fix negative voltages
777  Module w83l785ts: New
778  Program eeprog: Make 8 bit mode the default
779  Program fancontrol: Improvements, fixes, support 2.6 kernels
780  Program mkpatch: Add lm75.h
781  Program pwmconfig: Improvements, fixes, support 2.6 kernels
782  Program sensors: Add ASB100 support
783  Program sensors-detect: Add 8712 Super I/O detection;
784                          add W83L785TS detection
785
786
7872.8.2 (20031211)
788  IMPORTANT: Limit initialization removed from all chip drivers!
789             If you didn't run 'sensors -s' in the past you may need to now!
790  File sensors.conf.eg: Change lm75 scaling back to 1;
791                        Add example for asb100
792  Library: Fix bmcsensors scaling, increase number of sensors;
793           Add w83627thf support; Advance version to 3.0.0;
794           Add hermes, ADM1032, ASB100 support;
795           Add it87 sensor type support;
796           Add sysfs support for kernel 2.6;
797           Fix memory leaks
798  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
799             Fail if no kernel .config file exists;
800             Don't build module dependencies for user and user_install
801  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
802          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
803          smsc47m1, thmc50, via686a, w83627hf, w83781d:
804          Remove initialization of limits by driver.
805  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
806  Modules (chip): Init cleanups
807  Module asb100: New
808  Module bmcsensors: Fix voltage scaling, voltage and fan limits
809  Modules ddcmon, eeprom: Add failure printks
810  Module fscher: New (Fujitsu-Siemens Hermes driver)
811  Module i2c-amd756: Fix AMD8111 support
812  Module i2c-amd8111: Fix byte writes
813  Module i2c-nforce2: Fix byte writes
814  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
815  Module i2c-sis630: Sync with 2.6.0-X driver version
816  Module i2c-viapro: Add support for Via 8237
817  Module it87: Add pwm and "smart guardian" support;
818               add it87 sensor type support
819  Module lm75: Fix negative voltages
820  Module lm90: Add ADM1032 support
821  Module w83781d: Fix 791d and 627hf detection
822  Module w83627hf: Add VID support
823  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
824  Program eeprog: New
825  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
826                                       support sysfs for i2c bus search
827  Program i2cdetect: Add -l option to list busses
828  Program i2cdump: Add 'c' mode for consective address reads
829  Program mkpatch: Cleanups
830  Program pwmconfig: Handle multiple fans controlled by a single pwm
831  Program sensord: Remove ddcmon support
832  Program sensors: Add ADM1032 support; add messages for sysfs
833  Program sensors-detect: Prefer Super I/O drivers;
834                          Fix W83627HF and W83791D detection; detect CSB6;
835                          Detect ADM1029, ADM1030, ADM1031;
836                          Detect W83637HF, W83697UF;
837                          Add it87 sensor type support; add sysfs support
838                          Reduce lm80 misdetects; remove PCFxxxx "detection"
839                          Detect VT8237 (KT600)
840                          Use VPD instead of DMI+ACPI for Thinkpad detection
841                          Suggest new asb100 driver instead of w83781d
842
843
8442.8.1 (20031005)
845  NOTE: Requires i2c-2.8.1 or newer!
846  File sensors.conf.eg: Improved adm1025 section
847                        Default temp labels for as99127f
848                        Improved lm83 section
849                        Better support for Asus A7V8X-X
850  File doc/chips/SUMMARY: Add SMSC manufacturer ID
851  File doc/chips/adm1025: Add decent documentation (almost new)
852  File doc/chips/lm83: Known motherboards list update, misc updates
853  Library: Change adm1025 names (hyst/over become low/high)
854           Swap adm1025 temp1 and temp2 to match the driver's order
855           Advance version to 2.0.1
856           Update lm83 support
857           Add support for lm90, xeontemp, max6650
858           Add separate messages for read and write errors
859           Add missing message for parse error
860  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
861  Modules (various): Fix includes for compilation on Alpha
862                     Use the new i2c_delay function instead of the various
863                     do_pause functions
864  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
865  Module i2c-nforce2: Cleanups
866  Module i2c-i810: Use readl/writel for portable access to PCI memory
867  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
868  Module i2c-savage4: Use readl/writel for portable access to PCI memory
869  Module i2c-sis630: Fix detection
870                     Add block data read/write support
871  Module i2c-sis645: Detection method change/bugfix
872  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
873  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
874  Module adm1025: Major driver update
875                  Add support for Philips NE1619
876                  Simplify the driver a lot (unified voltages, unified
877                  temperatures and much more)
878                  Fix default voltage limits
879                  Change default temperature limits
880                  Swap remote and local temperatures to match the internal
881                  registers order (make the code unification possible)
882                  Export remote diode fault through alarms
883  Module ddcmon: Major update
884                 Add half a dozen new features
885                 Add checksum parameter (same as for the eeprom module)
886                 Fix monitor limits
887  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
888  Module lm78: Fix a fan_div/fan_min bug
889  Module lm83: Add t_crit and alarms support
890  Module lm90: New
891  Module max6650: New
892  Module saa1064: New
893  Module smsc47m1: Add support for 47M142
894  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
895                   enhance w83627thf support
896  Module w83781d: Enhance chip detection; clean up error returns;
897                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
898  Module xeontemp: New
899  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
900                           Mark Rambus as unsupported
901  Program decode-edid.pl: New
902                          Interfaces between our eeprom module and
903                          parse-edid from the read-edid project
904  Program p4b_smbus: Fix SMP compilation
905  Program sensord: Add support for IT87 (Mike Black)
906                   Change ADM1025 support to match the changes made to
907                   the library
908  Program sensors: Rewrite and enhance EEPROM support
909                   Change LM83 and ADM1025 support to match the changes
910                   made to the library
911                   Add DRDRAM support to print_eeprom
912                   Exit(1) on /proc write failure (Malte Starostik)
913                   Add LM90, MAX6650 support
914  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
915                          Add support for LM82, LM86, LM89
916                          Improved W83781D family detection
917                          Add support for AS19927F rev.2, ASB100 Bach
918                          Add support for Asus Mozart-2 (3 types)
919                          Add support for NE1619
920                          Add support for FSC Hermes
921                          Make sure /sbin is in the user's path
922                          Fix EEPROM detection
923                          Automatic module.conf and /dev/i2c* detection
924                          Improve LM82 and LM83 detection
925                          Handle "to-be-written" cleanly
926                          Add detection for 47M14x Super I/O
927                          Handle the one-address-many-chips-same-driver
928                          case
929
930
9312.8.0 (20030714)
932  NOTE: Requires i2c-2.8.0 or newer!!!
933  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
934                  2.4.13 or later required for mkpatch.
935  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
936                  i2c package
937  File doc/chips/fscscy: Add watchdog documentation
938  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
939  File sensors.h: Now automatically generated
940  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
941           add adm1026, lm83, lm85, w83791d support;
942           Advance version to 2.0.0
943  Makefiles: Generate warnings if new library won't be found by ld.so;
944             Modules now install in kernel/drivers/i2c/[busses,chips];
945             Ensure that headers in /usr/local/include are used first;
946             Don't use /usr/include headers for modules;
947             Handle multiple UTS_RELEASE definitions in linux/version.h;
948             Automatically generate kernel/include/sensors.h;
949             Remove old gzipped modules; remove old misc directory if empty;
950             Remove pre-2.4 installation method;
951             -Wall now the default;
952             Add new targets user, user_install, and help;
953             Run depmod after module installation
954  Modules (all): Cleanups including
955                - Add #include <i2c-proc.h>
956                - C99 initializers
957                - Remove #ifdef MODULE
958                - Remove #ifndef THIS_MODULE
959                - Remove #ifndef MODULE_LICENSE
960                - Remove other 2.1/2.2 #ifdefs
961                - Remove #include "sensors.h", copy SYSCTL defs to module
962                - Remove excess #includes
963                - Remove argument in i2c_register_entry()
964                - Remove dummy xxx_command() definition
965                - Remove EXPORT_NO_SYMBOLS
966                - Remove init_MUTEX #define
967                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
968                  no longer adjust their own refcounts
969                - Use module_init() and module_exit()
970                - Update to new i2c_driver struct definition
971  Modules (bus PCI): Convert to PCI-module-style initialization
972  Modules (several): Add support for AMD Opteron VRM (VID) encoding
973  Module adm1021: Set alarm on failed reads and report old value;
974                  merge changes from kernel 2.5.54
975  Module adm1026: New
976  Module bmcsensors: Fix compile when DEBUG=1
977  Modules ddcmon, eeprom: Use i2c block reads if possible;
978                          better error handling
979  Module ds1307: Add to Makefile
980  Module gl520sm: Fix temperature over/hyst writes
981  Module lm75: merge changes from kernel 2.5.54
982  Module lm83: New
983  Module lm85: New
984  Module i2c-ali1535: Check for invalid transaction
985  Module i2c-ali15x3: Check for invalid transaction
986  Module i2c-amd756: merge changes from kernel 2.5.54;
987                     check for invalid transaction
988  Module i2c-amd8111: merge changes from kernel 2.5.54
989  Module i2c-i801: Add support for 82801EB (ICH5)
990  Module i2c-i810: Fix for some chips
991  Module i2c-nforce2: New
992  Module i2c-piix4: Check for invalid transaction
993  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
994  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
995        north bridges; SiS962 and SiS963 south bridges
996  Module i2c-viapro: Check for invalid transaction
997  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
998          pwm and pwm enable support; update docs
999  Module smbus-arp: Check adapter for HW or SW PEC support;
1000                    add reset option
1001  Module w83781d: Add support for w83791d
1002  Module w83627hf: New
1003  Program decode-dimms.pl: Recognize DDR and Rambus
1004  Program eeprom: Fix writes for small eeproms
1005  Program eeprom, eepromer: Use local i2c-dev.h for build
1006  Program fancontrol: New
1007  Program lm_sensors.init: Call sensors -s in start()
1008  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1009                   Add adm1026,lm85 support;
1010                   Remove sensors.c file; add sensors_compat.h;
1011                   Remove patches to i2c-core.c and drivers/char/mem.c;
1012                   Now works only for kernels 2.4.13 or later
1013  Program p4b_smbus: Fix 'make install';
1014                     Install in same place as other modules;
1015                     Clear correct bits in config word
1016  Program pwmconfig: New
1017  Program sensors: add adm1026, lm85, w83791d support
1018  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1019                          w83627hf, w83627thf, w83697hf);
1020                          Add support for SiS651, SiS961, SiS745, SiS746;
1021                          Support dmidecode 2.0 and later;
1022                          Fix "C" format error;
1023                          Add support for adm1026, 82801EB (ICH5), W83791D;
1024                          Add support for w83l785ts, nForce2;
1025                          Fix UTF-8 incompatibility;
1026                          Better support for lm75;
1027                          Add support for lm83
1028
10292.7.0 (20021208)
1030  NOTE: Requires i2c-2.7.0 or newer.
1031  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1032  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1033  File doc/busses/i2c-sis645: Add license
1034  File doc/chips/lm92: Add license, features
1035  File doc/chips/maxilife: Add license, parameters, features
1036  File doc/chips/smartbatt: Complete rewrite
1037  File doc/chips/vt8231: Add license, parameters
1038  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1039  Library: Add support for MC1066; add multiple VRM version support for lm87;
1040           enhance adm1023 support; initial support for Sony Vaio eeprom;
1041           add support for bmcsensors; add hacks for additional dummy drivers
1042  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1043            add flags for x86_64 compiles
1044  Module adm1021: Add support for MC1066
1045  Module bmcsensors: New
1046  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1047                   kernel 2.5.43; fix 2.2 kernel compiles
1048  Module gl518sm: Iterate allowed only for rev 0x00
1049  Module i2c-amd756: Configure base address for nForce support;
1050                     check for uninitialized base address;
1051                     add support for amd8111 (SMBus 1.0)
1052  Module i2c-amd8111: New (SMBus 2.0)
1053  Module i2c-ipmb: New
1054  Module i2c-ipmi: New
1055  Module i2c-keywest: Sync with kernel 2.4.20
1056  Module i2c-sis630: Add support for SiS730
1057  Module i2c-sis645: Improve support for SiS645/961;
1058                     add support for SiS645DX/961 and SiS735;
1059                     fix 2.2 kernel compiles
1060  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1061  Module lm87: Add multiple VRM version support
1062  Module vt1211: Fix inx limits and alarms; fix in0
1063  Module vt8231: Fix inx limits and alarms; fix in0
1064  Module w83781d: Fix in0/in1 initialization
1065  Module smartbatt: New
1066  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1067  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1068                           stop decoding on checksum error
1069  Program dmidecode: Fix read bug; upgrade to version 1.8
1070  Program doc-insmod: Complete rewrite; fix author output
1071  Program doc-features: Complete rewrite; handle missing sysctl entries;
1072                        handle unknown prefix with suggestion
1073  Program lm_sensors.init: Remove spaces bug; add green/red output
1074  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1075  Program rrd: Add sanity limits to newly-created RRD.
1076  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1077  Program sensors: Add support for MC1066, Rambus Rimms;
1078                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1079                   initial support for Sony Vaio eeprom
1080  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1081                          IPMI, AMD8111; add help if no sensors found;
1082                          add ACPI method for IBM system detection;
1083                          work with old Perl versions again;
1084                          initial support for Sony Vaio eeprom
1085
10862.6.5 (20020915)
1087  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1088  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1089  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1090  Module dmi_scan: new
1091  Module ds1621: Fix enable/disable
1092  Module eeprom: Do not corrupt 24RF08's when checksum=1
1093  Module i2c-i801: Check for uninitialized base address;
1094                   enable if not enabled
1095  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1096  Module i2c-sis630: new
1097  Module i2c-sis645: new
1098  Module lm92: Fix in-kernel initialization
1099  Module via686a: Remove VT8231 support
1100  Module vt8231: new
1101  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1102  Program dmidecode: new
1103  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1104  Program mkpatch: Add Config.in entries for, lm92,
1105                   pcf8574, pcf8591, smsc47m1, vt1211;
1106                   add dmi_scan
1107  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1108  Program lm_sensors.init: fix stop()
1109  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1110                   add support for logging loadavg in RRD;
1111                   fix down-converting raw labels for RRD;
1112                   update chip support, still behind sensors
1113  Program sensors: Add /usr/local/etc to config file path;
1114                   fix -c and -u flags; add vt8231
1115  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1116                          refuse to run on IBM systems;
1117                          fix sysconfig module numbering;
1118                          change quick write to not corrupt 24RF08's
1119
11202.6.4 (20020719)
1121  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1122  File doc/vid: New
1123  File include/sensors_vid.h: New
1124  File sensors.conf.eg: Add vt1211, smsc47m1
1125  Library: Add multiple VRM version support for adm1025, w83781d;
1126           fix 'flex scanner jammed' on some systems;
1127           add vt1211, smsc47m1, lm92;
1128           fix access mode checking
1129  Makefiles: For 2.4+ kernels, modules now install in
1130             kernel/drivers/[i2c,sensors] , not misc/ , and
1131             'make install' removes old versions in misc/ .
1132             Use $CFLAGS and $CPPFLAGS if defined.
1133  Module adm1025: Add multiple VID version support
1134  Module ds1307: new
1135  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1136                     reliability improvements
1137  Module i2c-hydra: Flush posted writes
1138  Module i2c-i801: Add support for 82801DB (ICH4)
1139  Module i2c-i810: Flush posted writes
1140  Module i2c-savage4: new
1141  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1142  Module i2c-voodoo3: Flush posted writes
1143  Module ds1307: New
1144  Module lm92: New
1145  Module smbus-arp: new
1146  Module smsc47m1: new
1147  Module via686a: Add support for VT8231 sensors
1148  Module vt1211: new
1149  Module w83781d: Add multiple VID version support; fix temp alarms
1150  Program eeprom: new
1151  Program i2cdump: Add smbus block command specification, add PEC support
1152  Program lm_sensors.init: new
1153  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1154                   pcf8574, pcf8591, smsc47m1, vt1211
1155  Program p4b_smbus: Add support for ICH4
1156  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1157  Program sensord.init: Renamed, was prog/init/sensors
1158  Program sensord: Major update, now requires rrd source;
1159                   not compiled by default
1160  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1161                   (don't display algo. and adap.) option;
1162                   add vt1211, smsc47m1, lm92
1163  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1164                          add 82801DB, LM85; fix perl warnings;
1165                          generate /etc/sysconfig/lm_sensors for
1166                          lm_sensors.init script
1167
11682.6.3 (20020322)
1169  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1170  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1171  File doc/chips/it87: add more temp_type help
1172  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1173                        add adm1021 section; add lm87 AIN[1,2] template;
1174                        swap negative voltage limits for 782d,783s,627hf,
1175                        697hf,it87; add more it87 help; swap neg. voltage
1176                        limits for lm78(-j), lm79, w83781d, as99127f
1177  Library: Add PCF8591, W83697HF, ADM1023 support;
1178           fix w83* fan_min computes;
1179           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1180  Module adm1024: Add MODULE_LICENSE("GPL")
1181  Module bt869: Add s-video out and DVD resolution support
1182  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1183  Module fscscy: implement min/max for voltages and fans
1184  Module i2c-amd756: Add support for AMD768
1185  Module i2c-i810: Add support for 810E
1186  Module i2c-keywest: Big update, sync with kernel 2.4.18
1187  Module i2c-piix4: Check for uninitialized base address
1188  Module i2c-sis5595: Blacklist 645, 735
1189  Module i2c-viapro: Check for uninitialized base address
1190  Module gl518sm: Standardize /proc entries in0-3
1191  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1192               fan -> fan1; fix temp2 limit writes
1193  Module pcf8574: Add support for PCF8574A; /proc interface changed
1194  Module pcf8591: new
1195  Module sis5595: Blacklist 645, 735
1196  Module w83781d: Add W83697HF support; allow force_subclients parameter
1197                  for Tyan 2460
1198  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1199  Program decode-vaio.pl: new
1200  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1201                   add text output
1202  Program init/sensors: New SysV init script
1203  Program mkpatch.pl: Add support for fscscy, add more help entries
1204  Program p4b_smbus: new
1205  Program rrd: Install summ_week.cgi
1206  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1207                   clean up chassis intrusion prints
1208  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1209                          fix Via686a and it87 detection;
1210                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1211                          fix uninitialized values; it87 beats lm78
1212
12132.6.2 (20011118)
1214  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1215  Chip Modules (all): malloc.h -> slab.h
1216  Modules (all): Add MODULE_LICENSE("GPL")
1217  File doc/FAQ: More updates and additions
1218  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1219  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1220           update it87 alarm ID's.
1221  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1222  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1223  Module i2c-amd756: Improve busy handling/printk's
1224  Module i2c-i801: Add 82801CA/CAM support
1225  Module i2c-keywest: Sync with PPC people, it works now
1226  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1227  Module i2c-viapro: Add Via VT8233 support
1228  Module it87: Merge alarm_* /proc entries to alarms
1229  Module sis5595: Fix support for rev B0
1230  Module via686a: Make limit initializations reliable
1231  Module w83781d: Allow init=0 parameter to bypass initialization
1232  Program isadump: Add flat address space (PCI) support
1233  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1234                      fscpos, it87, maxilife, mtp008
1235  Program sensors: Fix w83781d temp precision
1236  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1237                          Fujitsu Poseidon and Scylla,
1238                          Intel 82443MX and 82801CA/CAM detection,
1239                          add ITE 8172G detection (driver in kernel 2.4.10)
1240
12412.6.1 (20010830)
1242  File BUGS: Updated
1243  File doc/FAQ: More updates and additions
1244  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1245  File sensors.conf.eg: Fix/enhance it87 section
1246  Library: ds1621 and it87 updates
1247  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1248  Module i2c-amd756: Add AMD 766 support
1249  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1250  Module i2c-piix4: Add Serverworks CSB5 support
1251  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1252  Module adm1025: Fixed temp2 min/max writes
1253  Module ds1621: Add 12-bit precision mode
1254  Module it87: Enable all alarms, add in8 support, add sensor type selection
1255  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1256                  remove support for module
1257  Module sis5595: Recognize unsupported chips and refuse to load
1258  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1259  Program eepromer: new
1260  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1261                      of sensors.c as a module in kernel
1262  Program sensors: it87 updates; adjust temp. precision for some chips
1263  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1264                          recognize unsupported SiS chips;
1265                          recognize AMD 766 and Serverworks CSB5.
1266
12672.6.0 (20010612)
1268  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1269        If your make fails because it can't find <linux/i2c-proc.h>, you
1270        forgot this step!!!
1271  File doc/FAQ: Many, many updates and additions
1272  File doc/busses/i2c-sis5595: new
1273  File doc/busses/i2c-tsunami: new
1274  File doc/chips/it87: new
1275  File doc/chips/via686a: Claim support for 686b.
1276  File README.thinkpad: new
1277  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1278                        Add lm87, adm9240, ds1780, lm81 templates;
1279                        Enhance help comments in file;
1280                        Add Tyan S2510 dual-MTP008 example;
1281                        Make separate sis5595 section.
1282  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1283  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1284  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1285           Add support for maxilife-nba and amd1024;
1286           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1287  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1288  Chip Modules (all): Change from sensors_* to i2c_* globals
1289                      for new i2c-proc.[ch]
1290  Makefiles: enhance to support Alpha architecture
1291  Module adm1021: Fix lm84 and gl523sm support
1292  Module adm1024: new
1293  Module i2c-i801: Chip detection cleanup
1294  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1295  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1296  Module i2c-tsunami: New
1297  Module i2c-via: Ensure i2c bus is tristated correctly.
1298  Module it87: new driver for IT8705, IT8712, Sis950 chips
1299  Module lm78: Recognize chipid=0x20
1300  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1301  Module mtp008: Fix temp initializations;
1302                 Save BIOS pin configuration of temps and fans;
1303                 Fix sensor type reads/writes and fan min writes;
1304                 Fix spurious invalid sensor type messages
1305  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1306                  used for patched kernel now.
1307                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1308  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1309                  Allow force_addr=0xaddr
1310  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1311  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1312                  reading changes; Add messages for subclient
1313                  registration failure
1314  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1315  Program i2cset: new
1316  Program isadump: fix for Alpha arch. compiles
1317  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1318                      Remove ltc1710; Fix i2c_sis5595 typo;
1319                      Support kernel 2.4.5 makefile change;
1320                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1321  Program sens_update_rrd: new
1322  Program sensord: Add -d (debug) and -p (pid-file) options
1323  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1324                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1325                   Change mtp008 temps from max/min to limit/hyst;
1326                   Add maxilife-nba, adm1024, it87 support.
1327  Program sensors-detect: Recognize lm78 with chipid=0x20;
1328                          Recognize SMSC Victory66 South Bridge;
1329                          Add devfs /dev/i2c/x support;
1330                          Add adm1024, it87xx support; Add thinkpad warning.
1331  Program tellerstats: new
1332
13332.5.5 (20010115)
1334  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1335        you have kernel 2.4.0-prerelease or greater.
1336  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1337  File doc/developers/proc: new
1338  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1339  Library: Add ds1621, mtp008 support
1340  Module adm1021: Add support for adm1021a / adm1023
1341  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1342  Module adm1025: Add support for remote temp; rename /proc entries to
1343                  in[0-5] and temp[1-2]; fix negative temp readings
1344  Module adm9240: Rename /proc entries to in[0-5]
1345  Module ddcmon: allow force and force_ddcmon parameters
1346  Module ds1621: new
1347  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1348  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1349  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1350  Module lm87: cleanup, update voltage calculations
1351  Module mtp008: new
1352  Module pcf8574: change update time to 5 seconds
1353  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1354  Module w83781d: fix beep setting via /proc
1355  Programs editticket, readticket: new
1356  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1357  Program mkpatch.pl: more fixes; now adds many more modules
1358  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1359                   add adm1025 temp2; report temp limits correctly as
1360                   min/max or limit/hysteresis; print message if no
1361                   sensors are found. Removed false errors from lm87 reads.
1362  Program sensors-detect: Add ds1621, mtp008 detection;
1363                          add ServerWorks detection
1364
13652.5.4 (20001012)
1366  Module i2c-viapro: Add support for Via 596B (0x3051)
1367  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1368  Program mkpatch.pl: fixed infinite loop
1369  Program sensors-detect: Detect Via 596B (0x3051)
1370
13712.5.3 (20001008)
1372  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1373  File useful_addresses.html: update
1374  Library: Add lm87 support
1375  Module pcf8574: new
1376  Module i2c-ali1535: new
1377  Module i2c-ali15x3: removed force #ifdef.
1378  Module i2c-i801: support Intel 82801BA (815E chipset)
1379  Module i2c-i801: add i2c block write support, fix smbus block bugs
1380                   (requires i2c 2.5.3 package)
1381  Module i2c-i810: support Intel 82815
1382  Module lm87: new
1383  Module sensors: Fix for kernel 2.4.0-test8
1384                  (remove copy_to_user_ret and put_user_ret)
1385  Module w83781d: limit fan divisors to 8 max. for as99127f
1386  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1387  Program i2cdump: Add smbus block read support
1388  Programs i2cdetect, i2cdump: Improve error reporting
1389  Program sensors: new switch -u (--unknown)
1390  Program sensors-detect: detect Intel 82801BA (815E chipset)
1391  Program sensors-detect: detect Intel 82815
1392  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1393  Program sensors-detect: detect National LM87
1394  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1395  Program sensors-detect: Improve error reporting
1396
13972.5.2 (20000709)
1398  File sensors.conf.eg: Fix lm80 in8 calculation
1399  Module w83781d: W83783S no longer crashes on unloading
1400  Program sensors-detect: more robustness in case of unknown i2c adapters
1401  Program sensors-detect, libsensors: fix eeprom size reporting
1402  Program sensord: more flexibility, support for alarm scanning etc.
1403  Program sensors: support for ignore setting on sensor alarms.
1404  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1405
14062.5.1 (20000618)
1407  Library: Add adm1025 support
1408  Module adm1025: new
1409  Module ddcmon: Fixed bus scan which could hang SMBus
1410  Module i2c-keywest: new
1411  Module maxilife: Add support for Maxilife '99 (NBA)
1412  Module via686a: Enable sensors if not enabled by BIOS
1413  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1414  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1415  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1416  Module w83781d: Fis as99127f fan speed (was 66% too high)
1417  Module w83781d: Improve beep input checking
1418  Program i2cdump: Add Winbond-style bank selection
1419  Program isadump: Add Winbond-style bank selection
1420  Program sensors: Add adm1025 support.
1421  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1422  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1423  File sensors.conf.eg: Add Maxilife '99 entries
1424  File sensors.conf.eg: Remove some as99127f entries.
1425    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1426          won't reinstall it) or else 'sensors -s' will fail.
1427
14282.5.0 (20000312)
1429  Dropped all kernel 2.0 and 2.1 compatibility
1430  Module i2c-i810: new
1431  Module ddcmon: new
1432  Module via686a: new
1433  Module i2c-amd756: fixed region request
1434  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1435  Module w83781d: Don't change pin settings at initialization;
1436                  also fix chip detection.
1437  Library: Support for ddcmon and via686a
1438  Program sensors-detect: Support for ddcmon and via686a
1439  Program sensors: Support for eeprom, ddcmon and via686a
1440
14412.4.5 (20000116)
1442  Introduced DESTDIR installation prefix
1443  Module lm80: fixes, temperature now read and set correctly
1444  Module i2c-voodoo3: driver enhancements
1445  Module w83781d: fixes, AS99127 works much better now
1446  Library: New ignore keyword in config file
1447  Programs: Support for new ignore keyword
1448  Program sensors-detect: Support for MGA detections
1449
14502.4.4 (19991201)
1451  Addition of the alpha release of AMD 756 SMBus host support.
1452  Many fixes and updates to the gl518sm driver
1453  Updates and fixes for device detection
1454
14552.4.0 (19990920)
1456  Too much to list.
1457  i2c and smbus parts are split off to a separate i2c package.
1458  New drivers and other stuff.
1459
14602.3.4 (19990616)
1461  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1462  All: Now compiles against kernel 2.0.x (again ;)
1463  Module gl518sm: some updates and refinements
1464
14652.3.3 (19990603)
1466  All: Now compiles against kernel 2.3.x (x >= 1)
1467  Module i2c-voodoo3: Timing issue fixes
1468  Module bt869: Seems to be functional and relatively well tested
1469  Many modules were modified to be more compatible with the new
1470   Mutex structure in the new experimental kernels.
1471
14722.3.2 (19990507)
1473  Module i2c-hydra: Now compiles on 2.0.x kernels
1474  Module i2c-lm75: Slightly better detection
1475  * New, but not compiled by default:
1476  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1477  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1478
14792.3.1 (19990501)
1480  All: Now compiles on PPC
1481  Module i2c-hydra: NEW
1482  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1483  Module w83781d: Removed deadlock (mutex was not initialized)
1484  Documentation: A few glitches removed
1485  Makefile: default module installation directory is now
1486            /lib/modules/current/extra/misc
1487  Program sensors-detect: PPC Hydra now detected
1488  Program sensors: Now prints complete GL518SM information
1489  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1490
14912.3.0 (19990422)
1492  All: Many, many changes and improvements
1493  All: Many small bugs and problems removed
1494  Modules: New insmod parameters
1495  Modules: Much improved chip detection
1496  Module maxilife: NEW
1497  Module adm1021: MAX1617A now also supported
1498  Module adm9240: DS1780 now also supported
1499  Module w83781d: W83782D and W83783S now also supported
1500  Program sensors-detect: NEW
1501  Library: All chips now supported
1502  Documentation: Very much improved
1503
15042.2.2 (199903??)
1505  Just some minor updates and bug fixes.
1506
15072.2.1 (19990218)
1508  All: Removed compile warnings
1509  Module i2c-dev: Small bug removed if DEBUG=1 was used
1510  Module sis5595: Now compiles for 2.0 kernels
1511  Module adm1021: Detection corrected
1512
15132.2.0 (19990216)
1514  All: Set copyrights to include 1999
1515  All: Small bugfixes
1516  I2C: Upgraded to newest archive of Simon Vogl
1517  Module i2c-dev: NEW
1518  Module i2c-ali15x3: NEW
1519  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1520     directories, and somewhat improved
1521  Module sis5595: NEW
1522  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1523  Library: Support for new chip drivers, several small bugs fixed
1524  Library manual pages: NEW
1525  Program i2cdetect: Moved to detect directory
1526  Program detect.pl: NEW
1527  Program doc-features: NEW
1528  Program sensors: Added man-page
1529  Document BUGS: Added cdrom bug and kernel i2c conflict
1530
15312.1.2 (19990116)
1532  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1533  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1534  Documentation in doc/kernel: NEW
1535
15362.1.1 (19990107)
1537  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1538                     and older
1539  Module gl518sm.o: Miscelaneous bugs and problems solved
1540  Program isadump: NEW
1541
15422.1.0 (19981230)
1543  Library: Completely NEW
1544  Program sensors: NEW
1545  Program grab_busses: NEW
1546  Program decode-dimms: More information
1547  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1548  Module w83781d.o: NEW
1549  Module lm80.o: NEW
1550  Module gl518sm.o: new procfile beep, several small updates
1551  Modules: Now use pin readings, no more scaling within the kernel (use the
1552           library instead)
1553
15542.0.2 (19981214)
1555  Module eeprom.o: NEW
1556  Program decode-dimms: NEW
1557  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1558           2.1.58
1559  Modules: Somewhat less verbose on transfers
1560  Module lm78.o now recognizes and handles lm78-j and lm79
1561
15622.0.1 (1998121?)
1563  Module gl518sm.o updates, to make it actually work
1564  Module lm75.o high/low-byte swapping write bug fixed
1565
15662.0.0 (19981209)
1567  Initial release
Note: See TracBrowser for help on using the browser.