root/lm-sensors/trunk/CHANGES @ 4292

Revision 4292, 76.1 KB (checked in by khali, 7 years ago)

vid_from_reg: Trim the VID value to the correct number of bits for each VRM.
Original patch by Rudolf Marek, backported from Linux 2.6.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  RPM: Obsolete, removed
6  File doc/fan-divisors: Update
7  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
8  Library: Add support for the pc87247 driver (fans only)
9           Probe for busses before chips
10           Drop support for algorithm names
11           Add support for coretemp driver   
12           Major update/optimization of config-file scanner
13           Add config-file scanner regression tests
14           Add f71872f support
15           Add w83627dhg support (David Holl, #2157)
16           Get the i2c adapter names from classdev.name
17           Add adm1029 support (Corentin Labbe)
18  Man page i2cdetect.8: Describe the output convention
19  Man page sensors.1: Update (option -c) and clean up
20  Module bmcsensors: Fix several warnings
21                     Fix fragile structure initialization
22  Module i2c-i801: Add ICH9 support
23  Module p4b_smbus: Add support for the ICH5
24  Module f71805f: Fix the device address decoding (2.6 backport)
25  Module icspll: Delete. It was useless and dangerous.
26  Program decode-dimms.pl: Remove spaces at end of lines
27  Program eepromer: Fix loads of warnings
28  Program i2cdetect: Make the output clearer
29  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
30  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
31                            without need of recompilation.
32  Programs dump/*: More robust handling of user inputs
33  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
34                                  Add support for non-i2c drivers
35  Program sensord: Add pc87247 support (fans only)
36                   Add vt1211 support (#2150)
37                   Add w83627dhg support (David Holl, #2157)
38                   Add w83627ehf voltage support (Dave Platt)
39                   Add k8temp support (Dave Platt)
40  Program sensors: Add pc87247 support (fans only)
41                   Hide error on missing f71805f fan
42                   Handle option -c more efficiently
43                   Drop option -a (show algorithm names)
44                   Add f71872f support
45                   Add w83627dhg support (David Holl, #2157)
46                   Add adm1029 support (Corentin Labbe)
47                   Hide error on missing w83793 temp (Gong Jun)
48  Program sensors-detect: Add SMSC DME1737 detection
49                          Add Fintek F71882FG and EPoX EP1308 detection
50                          Add Intel Core thermal sensor detection
51                          Preallocate memory for I2C_FUNCS ioctl (#2138)
52                          Prevent misdetection of MAX6633/MAX6634/MAX6635
53                          Add Intel ICH9 detection
54                          Add Maxim MAX6648/MAX6692 detection
55                          Improve ADM1029 detection
56                          Add Andigilog chips detection
57                          Add Intel AMB FB-DIMM thermal sensor detection
58                          Add ATI SB600 detection
59
60
612.10.1 (20060924)
62  File doc/developers/checklist renamed to dev/developers/release_checklist
63          with clarifications and updates for new SVN server.
64  File README.package: Delete.
65  File doc/busses/i2c-piix4: Update (2.6 backport)
66  File doc/developers/sysfs-interface: Update
67  File etc/sensors.conf.eg: Add an smsc47m192 section
68                            Comment out all set statements
69                            Add an it8716 section
70                            Add a w83793 section
71                            Adjust the vt1211 section to match the new driver
72                             interface
73  Library: Fix device scan when no i2c support is present
74           Add support for W83627EHF voltage inputs and alarms
75           Add support for the smsc47m192 driver
76           Fix all memory leaks (yeah!)
77           Fix no sensors being reported as an error
78           Add support for the IT8716F and IT8718F chips
79           Add support for the W83793 chip (Yuan Mu)
80           Map the 2.6 adm1026's fan8 to fan0
81           Missing sysfs busses and classes are not errors
82           Change vt1211 temp3-7 magnitude from 1 to 3
83  Makefile: Don't grep autoconf.h on user-space targets
84            Fix depmod on non-running kernel version
85            Remove empty include directories on make user_uninstall
86  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
87  Module i2c-amd756-s4882: Improve static semaphore initialization
88                           (2.6 backport)
89  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
90                   Add ICH8 support (2.6 backport)
91                   Fix block transaction poll loops (2.6 backport)
92                   Remove PCI function check (2.6 backport)
93                   Cleanups (2.6 backport)
94  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
95  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
96                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
97                    Drop the fix_hstcfg parameter (2.6 backport)
98  Module i2c-viapro: Fix compilation with kernels < 2.4.21
99                     Add VT8237A and VT8251
100  Module lm83: Add LM82 support (2.6 backport)
101  Module vt1211: The VT1211 has no in6
102                 Rework the voltage and temperature conversions and the
103                  temperature input order to match the Linux 2.6 driver
104  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
105                  Add specific alarm and beep defines for the W83791D
106  Module w83792d: Fix PWM range (2.6 backport)
107  Program decode-dimms.pl: Decode depending on the memory type
108                           Decode the manufacturing date to an ISO8601 date
109                           Add the memory size computation and provide brief
110                            timing characteritics for SDRAM/DDR/DDR2 memory
111                           Add memory size computation for Rambus memory
112                           Various output cleanups and fixes
113  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
114  Program decode-vaio.pl: Detect and skip false positives
115  Program i2cdetect: Add a mode to print adapter functionalities
116  Program i2cdump: Restore bank after bank switching
117                   Add new mode W (read word on even register addresses)
118  Program mkpatch: Fix typo breaking f71805f
119                   Turn warnings on (-w), and fix them
120                   Print a usage message on missing command line parameters
121  Program pwmconfig: Use mktemp instead of tempfile
122  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
123                   Add smsc47m192 support
124                   Add abituguru support (Hans de Goede)
125                   Fix memory leak when printing an unknown chip
126                   Add it8716 and it8718 support
127                   Make each it87 fan and fan div optional
128                   Print missing w83791d values
129                   Add w83793 support (Yuan Mu)
130                   The adt7463 may not have in4 (#2119)
131                   Hide more vt1211 missing input errors
132                   Clearer error messages when no sensors found
133  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
134                          Add ATI IXP200/300/400 SMBus detection
135                          Prevent warning on 64-bit PCI addresses
136                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
137                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
138                           F75384S/M, F75387SG/RG and F81218D detection
139                          Add Winbond W83793R/G and W83627DHG detection
140                          Handle the W83791D driver difference between kernels
141                          Add nForce4 MCP04, MCP51 and MCP55 detection
142                          Add AMD Geode devices detection
143                          Add ITE IT8716F and IT8718F detection
144                          Add NatSemi/Winbond PC87427 detection
145                          Get driver information for busy addresses from
146                           sysfs (2.6 only)
147                          Drop the ISA IT87xxF detection
148                          Check i2c adapter functionalities before probing
149                          Add Intel ICH8 SMBus detection
150                          Add AMD K8 thermal sensors detection
151                          Simplify detection of SiS5595, VIA686 and VT8231
152                          Add Analog Devices ADM1033, ADM1034, ADT7462,
153                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
154                          Check for root user at startup
155                          Attempt to be slightly more user-friendly
156                          Add VT8237A and VT8251
157                          Remove detection of nVidia graphics adapters
158                          Use sysfs for PCI device enumeration
159                          Add generic PCI SMBus adapter detection
160                          Add generic Super-I/O logical device detection
161                          Add SMSC LPC47M172/182 detection
162
163
1642.10.0 (20060214)
165  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
166  File doc/busses/i2c-viapro: Update (2.6 backport)
167  File doc/chips/via686a: Update (2.6 backport)
168  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
169  File etc/sensors.conf.eg: Do not set vrm by default
170  File i2c-dev.h: Fix union i2c_smbus_data definition
171                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
172                  Add missing parentheses around macros
173                  Drop I2C_FUNC_SMBUS_EMUL
174                  Drop I2C_FUNC_SMBUS_*_PEC
175                  Drop I2C_SMBUS_*_PEC
176  File sensors_vid.h: Drop default VRM
177  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
178           This is intentional.  Use decode-dimms.pl if you still
179           need your memory SPD data.
180  Library: Big update to use libsysfs.  More TODO though.
181           Fix bus matching code for Linux 2.6 (Karsten Petersen)
182           Add f71805f, w83687thf support
183           Add platform drivers support
184           Fix sysctl warnings on x86_64
185           Restore vt1211 temp1
186  Makefile: Compile user-space programs with -Wundef
187  Module i2c-i801: Simplify the hardware PEC code
188                   Always set PEC mode explicitly before each transaction
189  Module i2c-i810: Documentation update, PCI IDs cleanup
190  Module i2c-keywest: Remove bus probing code (2.6 backport)
191  Module i2c-nforce2: Remove dead code (2.6 backport)
192                      Add the ID of the nForce4 MCP-04 (2.6 backport)
193  Module i2c-via: Remove dead code
194  Module i2c-viapro: Remove dead code
195                     Support I2C block read (2.6 backport)
196                     Code cleanups (2.6 backport)
197                     Improve debug register dump (2.6 backport)
198  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
199          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
200          i2c-sis645: Use pci_driver name to request I/O region; do
201                      not initialize i2c_adapter name to "unset" (2.6
202                      backport)
203  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
204                                              (2.6 backport)
205  Module adm9240: Cleanups (2.6 backport)
206  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
207  Module it87: Minor cleanups
208               Fix fan3_div setting bug (Anton V. Staaf)
209  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
210               Separate the register read function
211               Add PEC support for the ADM1032
212  Module via686a: Cleanups
213  Module w83627hf: Drop useless initialization step (2.6 backport)
214                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
215                   Fix alarms (Yuan Mu)
216                   Preserve fan min on fan div change (Yuan Mu)
217                   Properly handle W83627THF without VID (Yuan Mu)
218                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
219                   Add W83687THF support
220  Module w83781d: Drop W83697HF support (Grant Coady)
221  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
222                  Fix fan control mode (PWM/DC) reporting
223                  Fix fan div auto-adjust (Yuan Mu)
224                  Fix the subclient handling
225  Module w83l785ts: Minor cleanup (2.6 backport)
226  Module vt1211: Restore temp1
227  Modules vt1211, vt8231: Change default VRM to 9.1
228  Program decode-dimms.pl: Add lookup tables for manufacturer names
229                           Fix rounding error in PCxxxx speed computation
230                           Improve text output
231                           Improve speed under Linux 2.6
232                           Verify checksum before decoding anything
233                           Improve manufacturing location decoding
234                           Improve memory type detection
235                           Improve part number decoding
236  Program i2cdump: Drop now useless #ifdef tests
237                   Fix capability check for continuous byte mode
238  Program i2cget: New
239  Program i2cset: Add PEC support
240                  Fix argc check
241  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
242                                       Print the correct bus type if bus
243                                       functionality can be queried
244  Program isadump: Display the real addresses in flat mode
245  Program mkdev.sh: Silently skip already existing nodes
246  Program mkpatch: Include f71805f
247  Program sensord: Do not log algorithm names
248                   Drop EEPROM support (Aurelien Jarno)
249                   Add W83627EHF, F71805F/FG support
250                   Fix PC87365/PC87366 alarms
251  Program sensors: Drop free_the_label
252                   Fix compilation with uclibc (no iconv)
253                   Add f71805f, w83687thf support
254  Program sensors-detect: Drop algorithm names
255                          Do not rely on i2cdetect -l printing algo names
256                          Simplify adapter name matching mechanism
257                          New address for ADM1032, ADT7461
258                          Improve ADT7467, ADT7468 support
259                          Fix MAX6659 reported driver
260                          Add Fintek F71805F detection
261                          Add Analog Devices ADT7476 detection
262                          Add Intel 82845G detection
263                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
264                          Fix udev detection in some corner case
265                          Improve DS1621 detection
266                          Always prefer ISA access over SMBus access
267
268
2692.9.2 (20050906)
270  File doc/chips/*: Big update (2.6 backport)
271  Library: Drop ds1780-specific code (now use adm9240)
272           Fix memory leak in sensors_get_label()
273           Support /sys/class/hwmon (Linux 2.6.14+)
274           Limit stack usage in sensors_read_proc_chips()
275  Makefile: Detect 2.6+ kernels and check targets
276  Man page isaset.8: Fix typos
277  Module adm1031: Fix broken kfree() calls
278  Module i2c-ali1563: New (2.6 backport by Winbond)
279  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
280  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
281          w83627hf.c: Tag find function __init
282  Module lm93: Fix memory leak
283  Module smsc47m1: Fix PWM enable polarity on read
284  Modules w83627hf, w83781d: Allow setting fan divisor to 128
285  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
286                           Added DDR/DDR2 frequency reporting in convenient
287                           form of DDRxxx PCyyyy
288  Program i2cdump: Properly handle short i2c block reads
289  Program fancontrol.pl: Fix compile errors
290  Program mkpatch: Include i2c-ali1563
291                   Include w83792d
292  Program pwmconfig: Fix unsafe temporary file use
293  Program rrd: Support 2.6 kernels
294  Program sensord: Add support for w83637hf
295                   Support pc87360 (Henrik Brix Andersen)
296  Program sensors: Support the VAIO "VGN" prefix for eeprom
297  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
298                          Advertise the w83792d driver
299                          Improve IT8705F and IT8712F detection
300                          Merge LM82 and LM83 detection
301                          Add W83687THF detection
302
303
3042.9.1 (20050412)
305  File doc/busses/i2c-nforce2: Update
306  File doc/chips/it87: Update
307  File doc/chips/lm90: Update for adt7461
308  File doc/chips/mic74: New
309  File etc/sensors.conf.eg: New sections for lm92 and w83792d
310  Library: Add support for 2.6 fscpos driver (Stefan Ott)
311           Fix sis5595 in4 (Aurelien Jarno)
312           Add support for 2.6 gl520sm driver (Maarten Deprez)
313           Add support for 2.6 bmcsensors driver (Yani Ioannou)
314           Add support for w83792d (Chunhao Huang/Winbond)
315           Add support for 2.6 adt7461 (James Chapman)
316           Add support for 2.6 lm92
317           Add support for 2.6 vt1211
318           Add preliminary support for 2.6 w83627ehf
319  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
320            Use -fno-strict-aliasing on all architectures
321  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
322  Module bmcsensors: Fix compile error
323                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
324  Module ds1621: Fix detection (Aurelien Jarno)
325  Module eeprom: Discard SPD-centric checksum module parameter
326                 Cleanup detection function (backport from Linux 2.6)
327  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
328  Module i2c-i801: Temporarily disable broken I2C block read
329  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
330                   Gelato)
331  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
332  Module i2c-viapro: Prevent repeated resets
333  Module it87: Improve Super-I/O detection
334               Limit I2C address range
335               Support VID on the IT8712F
336  Module lm75: Only initialize CMP/INT bit
337  Module lm78: Fix bug with setting negative temperature limits
338  Module lm85: Properly differentiate between ADM1027 and ADT7463
339               Add EMC6D102 support
340  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
341               Add limited ADT7461 support
342  Module lm93: Fix IN10 (+5V) scaling
343  Module mic74: New
344  Module w83627hf: Support secondary Super-I/O address
345                   Enable temp2 and temp3 if they are disabled
346  Module w83781d: Revert AS99127F temp2 and temp3 computation change
347                  Skip final initialization step for AS99127F chips
348  Module w83792d: New (Chunhao Huang/Winbond)
349  Program ddcmon: New; user-space replacement for the ddcmon driver
350  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
351  Program isadump: Handle Super-I/O keys
352  Program lm_sensors.init: Cleanups (Axel Thimm)
353  Program mkdev.sh: Add basic command-line interface
354  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
355  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
356                     Don't complain about read-only enable files (lm85)
357                     Fix handling of alternate config file name
358  Program sensord: Fix erroneous error message (Aurelien Jarno)
359                   Support sis5595 in4 (Aurelien Jarno)
360                   Support w83627thf
361                   Support the separate it8712 prefix (Aurelien Jarno)
362  Program sensors: Display sis5595 in4 (Aurelien Jarno)
363                   No errors on missing pc87360 fans
364                   Add gl520sm support (Maarten Deprez)
365                   Improve vt1211 error/ignore handling (Michael Carland)
366                   Support w83792d, w83627ehf
367  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
368                          Improve IT8705F and IT8712F detection
369                          Improve udev detection
370                          Fix DS1621 detection
371                          Add W83627EHF detection
372                          Add ATI SMBus detection
373                          Add VT1211 alias detection
374                          Warn if chip modules not found
375                          Add i2c-ipmi to list if bmcsensors is on it
376                          Add PC87591 detection
377                          Search for correct udev db file name
378                          Add nForce3 250Gb and nForce4 detection
379
380
3812.9.0 (20041228)
382  NOTE: Requires i2c-2.9.0 or newer!
383  File README.thinkpad: Update
384  File doc/chips/it87: Cleanups
385  File doc/chips/lm63: New
386  File etc/sensors.conf.eg: Set via686a voltage limits
387  File kernel/chips/Module.mk: Resync module list with mkpatch
388  File kernel/include/sensors_compat.h: Define __devexit_p if missing
389                                        (kernels 2.4.16 and older)
390  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
391                             and dec_use removed in release 2.8.0
392  Modules (all chip drivers): Remove owner from i2c_driver; pass
393                              controlling_mod to i2c_register_entry() again
394  Module bmcsensors: Support function 1/x
395  Module i2c-amd756: Display the real bus name
396  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
397  Module i2c-i801: Support i2c block read (ICH5 and higher)
398                   Add PEC support for ICH6
399                   Add support for ICH7
400  Module i2c-ipmb: Remove from build since it doesn't work
401  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
402  Module icspll: Fix compilation
403  Module lm63: New driver for the National Semiconductor LM63
404  Module lm83: Use signed types for temperatures
405               Check limits on register writes
406  Module lm87: Round voltages properly
407               Retry on read errors (David Knierim)
408               Less agressive init (no reset)
409  Module lm90: Use signed types for temperatures
410               Check limits on register writes
411  Module lm93: Added module parameter for VID pin input thresholds.
412               Fix typo in dynamic VID alarms
413               Adds a couple log messages for failed transactions (David
414               Knierim)
415               Fix compilation breaking C99-ism (Axel Thimm)
416               Fix block read retries
417  Module pc87360: Support secondary Super-I/O address
418  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
419  Library: Add lm63 support
420           Add lpc47b397 support
421  Programs *.init: Rename lockfile to match file name
422  Programs i2cset, isaset: Written byte/word can be masked
423  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
424  Program mkpatch: Include i2c-amd756-s4882
425  Program pwmconfig: Handle new (well, back to old) pwm files names for
426                     Linux 2.6.10 and up
427  Program sensord: Do not scale load average (Aurelien Jarno)
428  Program sensors: Add lm63, lpc47b397 support
429                   Support DDR2 memory module EEPROMs (Rudolf Marek)
430                   Support only one location for the default configuration file
431                   Display the default configuration file location in --help
432                   Simplify the configuration file opening code
433  Program sensors-detect: Improve LM63 detection
434                          Discard IBM Thinkpad detection code
435                          Add PCA9556, LPC47B397, ICH7 detection
436                          Fix W83792D detection, add W83791SD detection
437
438
4392.8.8 (20041007)
440  File doc/donations: Update
441  File doc/lm_sensors-FAQ.texi: Add 4.6.1
442                                Update 4.7
443  File doc/chips/gl518sm: Update "iterate" info
444  File doc/chips/it87: Discard outdated module parameters
445  File doc/chips/lm75: LM77 is not supported
446  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
447  File doc/chips/lm93: New
448  File doc/chips/w83l785ts: Improvements
449  File etc/sensors.conf.eg: Fix it87 lines order
450                            Update lm87 section
451  File kernel/include/sensors_vid.h: Support VRM 10.0
452  Library: Support 2.6 adm1025
453           Preliminary support for 2.6 lm87
454           Support 2.6 adm9240
455           Allow an alternative sysfs file name for chip features (2.6)
456           Fix lm83 critical limits (2.6)
457           Add lm93 support
458           Prevent some procfs errors from being silently ignored
459  Makefiles: Implement user_uninstall (Rudolf Marek)
460             Spoof LOGNAME and HOSTNAME when making html man pages
461  Module adm1025: Refine detection
462                  Update limit registers again (revert of 2.8.1)
463                  Init high limits if they read 0
464                  Fix conversions
465  Module lm75: Refine detection
466  Module lm78: Fix init
467  Module lm83: Default to kind lm83 if forced.
468               Fix temperature macros.
469  Module lm90: Add LM86, MAX6657 and MAX6658 support
470  Module lm93: New
471  Module mtp008: Fix the setting of limits on temp2
472  Module pca9540: Refine detection
473  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
474                  Support VID
475                  Fix fan_div file when fan count is less than 3
476                  Additional init and debug
477  Module smsc47m1: Fix pwm_enable being inverted
478  Module w83627hf: Add alternate VCORE/in0 calculation method
479                   Remove reset of chip by driver on initialization
480  Module w83781d: Fix default VRM for w83791d
481  Module w83l785ts: Implement read error handling (backport from 2.6)
482  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
483                    Wait for user input to continue (as opposed to 5 sec
484                    delay), can be skipped with -y
485                    Various cleanups and code refactoring
486                    Update manual pages
487  Program fancontrol.init: New (Dean Takemori)
488  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
489  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
490                           (Giuseppe Della Bianca)
491  Program mkdev.sh: Detect devfs and refuse to run
492                    Use mknod's mode instead of chmod
493  Program mkpatch: Include xeontemp and pc87360
494  Program sensors: Rework adm1025 support
495                   Display pc87365/pc87366 VID
496                   Improve smsc47m1 support
497                   Hide 2.6 adm1027 alarm_mask being missing
498                   Print VRM version for all supported chips
499  Program sensors-detect: Support LM93, LM77, LM63
500                          Support PC8739x Super-I/O family (no sensors)
501                          Fix PCA9540 support
502                          Refine ADM1025/ADM1025A detection
503                          Refine LM75 detection
504                          Ignore missing /proc/modules (Andras Bali)
505                          Script-wide Perl cleanups
506                          Support udev
507                          Support W83792D, LM96000
508
509
5102.8.7 (20040611)
511  File README.thinkpad: Update 24RF08 status
512  File doc/fan-divisors: More info on accuracy
513  File doc/lm_sensors-FAQ.texi: Update 4.27
514  File doc/chips/adm1031: New
515  File doc/chips/max1619: New
516  File doc/chips/pc87360-fan: Renamed to pc87360
517  File doc/chips/pc87360: Big update
518  File doc/chips/w83781d: Update AS99127F documentation
519  File etc/sensors.conf.eg: Add comments about BP6 voltages
520                            Add comment on Asus A7V8X-X VCore
521                            Misc fixes to lm80 section
522                            Update via686a section
523                            New lm99 section
524                            Add section for LM85-like chips
525                            Preliminary pc87366 section
526                            Add comment on GL520SM application modes
527                            Document beep_enable (Aurelien Jarno)
528                            Preliminary max1619 section
529                            Preliminary adm1030 and adm1031 sections
530  Library: Fix 2.6 VRM
531           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
532           Fully support the PC87360 family
533           Support the lm99
534           Add version and date strings
535           Support 2.6 max1619
536  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
537  Man page i2cdetect.8: document new command line flags
538  Man page i2cdump.8: More details on how i2cdump can write to a chip
539  Modules (all chip drivers): Rework memory allocation scheme.
540  Module adm1031: New (Alexandre d'Alton)
541  Module bmcsensors: Fix oops by creating thread for initialization
542  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
543  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
544          asb100.c, lm92.c: Use swab16
545  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
546  Module gl520sm: Less agressive initialization process
547                  Fix temp1 limits being unsettable in application
548                  Ensure that temp2 and in4 are not used at the same time
549  Module i2c-i801: Support 6300ESB and ICH6
550  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
551  Module i2c-sis645: Add support for SiS655
552  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
553  Module lm90: Support LM99 and LM89
554  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
555               Get rid of useless i2c_probe call
556  Module max1619: New (Alexey Fisher)
557  Module p4b_smbus: Add support for mobile versions of the 82801
558                    (Axel Thimm)
559  Module pc87360-fan: Renamed to pc87360
560  Module pc87360: Also support PC87365 and PC87366
561                  Add write support
562                  Correctly set the chip name depending on the type
563                  Add voltage and temperature support
564                  Fix fan speed computation
565                  Retrieve fans configuration from Super-I/O space
566                  Export pwm_enable (read-only)
567                  Honor pwm invert bits
568                  Clear fan alarms after we read them
569                  Do not read fan data when monitoring is disabled
570                  Do not include SENSORS_INSMOD stuff
571                  New module parameter: init
572                  Fan clock dividers change automatically
573                  Add thermistor dupport
574  Module smsc47m1: Lock on reads and writes
575                   Various PWM fixes
576  Module thmc50: Fix address range
577  Module via686a: Fix voltage roundings
578                  Simplify temperature conversions
579  Module w83781d: Drop PWM support for as99127f
580                  Invert AS99127F beep bits in driver rather than user-space
581  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
582  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
583  Program fancontrol.pl: New
584  Program i2cdetect: Adapt probing method to address
585                     Add -q and -r flags to force probing methods
586                     Allow probing range selection
587  Program isadump: Major improvements
588  Program isaset: New
589  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
590                   module
591                   Include i2c-nforce2
592  Program sensord: New --rrd-no-average parameter
593                   Syncronize time slots with rrd
594                   Fix W83781D temp3 alarm (Aurelien Jarno)
595                   Add ASB100 support (Andrew May)
596  Program sensors: Fully support the PC87360 family
597                   Fix lm80 temperature alarms
598                   Support the lm99
599                   Do not invert AS99127F beep bits anymore
600                   Fix W83781D temp3 alarm (Aurelien Jarno)
601                   Print library version string
602  Program sensors-detect: Rework Super I/O detection
603                          Support SiS655/SiS96x
604                          Support ADT7461 and ADT7467
605                          Better support for ADM1027, ADT7460 and ADT7463
606                          Explicitly support ADM1028
607                          Scan all logical devices of PC87365 and PC87366
608                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
609                          Detect eeproms with software write protect (not
610                          enabled by default)
611                          Support ALi 1563 (2.6 only)
612                          Drop LTC1710 support
613                          Use byte reads for probing on ranges 0x30-0x37 and
614                          0x50-0x5F
615                          Improve LM89 and LM99 support
616                          Support GeForce FX 5900 video cards
617                          Fix devfs misdetection (Aurelien Jarno)
618                          Detect 6300ESB, ICH6
619                          Fix double detection of ISA chips
620                          Support MAX1619
621                          Support PC87373 Super-I/O
622                          Fix unknown adapters appearing multiple times
623                          Refine MAX6650/MAX6651 detection
624
625
6262.8.6 (20040405)
627  File README.thinkpad: Update status
628  File doc/chips/pca9540: New
629  File doc/chips/pc87360-fan: New
630  File etc/sensors.conf.eg: Update pcf8591 default configuration
631  Library: Switch to new sysfs naming standard
632           Fix gcc 3.3 warnings (Philipp Thomas)
633           Support 2.6 ds1621 and pcf8591
634           Change pcf8591 magnitudes
635           Support pc87360-fan
636  Makefile: Install shared library 755
637  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
638  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
639  Modules ds1621, pcf8591: Check for capabilities before using them
640                           (Aurelien Jarno)
641  Modules pcf8574, pcf8591: Cleanups
642  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
643  Module adm1021: Better detection and initialization
644  Module pca9540: New driver for the Philips PCA9540
645  Module pc87360-fan: New driver for the National Semiconductor PC87360,
646                      PC87363 and PC87364 Super I/O chips
647  Module smsc47m1: Support the LPC47B27x
648  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
649  Program i2cdetect: Skip special addresses by default
650  Program sensord: Prevent null pointer dereference (Tim Toohey)
651  Program sensors: Print the degree symbol in the terminal's current locale
652                   (Aurelien Jarno)
653                   Update pcf8591 print to support 2.6 driver
654                   Support pc87360-fan
655  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
656                          Improved SiS chips support
657                          Add a white list of IBM systems
658                          Drop support of undetectable adapters
659                          Fix smart battery detection
660                          Add smart battery charger and manager detection
661                          Rework adm1021 and clones detection
662                          The PC87360, PC87363 and PC87364 Super I/O chips
663                          now have a (preliminary) driver
664                          Rework Super I/O detection
665                          Better support of devfs
666  Program sensors-detect-stat.pl: New
667
668
6692.8.5 (20040305)
670  File doc/chips/SUMMARY: Update
671  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
672  Makefiles hotplug and rrd: Remove -o and -g arguments to install
673  Module bmcsensors: Increase max SDRs to 100
674  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
675  Module i2c-amd756: Don't register driver to avoid driver conflicts.
676                     (Daniel Rune Jensen)
677  Module it87: Better temperature sensor types handling (Takeru Komoriya)
678               Fix reset=1 (Takeru Komoriya)
679  Module lm80: Code cleanups
680  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
681  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
682  Module w83627hf: Add w83637hf support
683                   Fix exported name
684                   Fix PWM in w83627thf
685                   Preserve other bits when forcing temp2/3 to comparator mode
686  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
687                  Remove asb100 support
688  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
689          Define driver ID if i2c-id.h doesn't have it yet.
690  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
691          Backport oops fix from Linux 2.6.
692  Modules (all chips): Get rid of useless headers
693  Program decode-edid.pl: Add sysfs support
694  Program sensors: Add w83637hf support
695                   Add support for Shuttle Ethernet EEPROMs
696                   Drop 2.6 subclient detection
697  Program sensors-detect: Add heuristics to the LM80 detection function
698                          Add support for W83L785R, improve W83L784R/AR
699                          Add GeForce FX 5600 as supported by rivatv
700                          More Super IO chips, better handling
701  Library: Update to match renames in fscher
702           Reverse temporary changes to w83l785ts mappings
703           Fix vt1211 and vt8231 uch_config not being writable
704           Add 2.6 lm80 support
705           Add w83637hf support
706           Remove in6 and temp1 from vt1211 and vt8231
707           Add support for Shuttle Ethernet EEPROMs
708           Remove unused as99127f features
709
710
7112.8.4 (20040207)
712  File doc/lm_sensors-FAQ.texi: Update 4.20.
713  File doc/chips/it87: Change hyst to low
714  File doc/chips/w83l785ts: New
715  File etc/sensors.conf.eg: Change it87 hyst to low
716                            Fix w83697hf supposed to have temp3
717                            Limits initialization for adm1025/ne1619
718                            Handle fscher voltage conversions
719                            Add Tyan Trinity S2495 KT400 setup (Eric
720                              Schumann)
721                            Fix fscher fan labels (Reinhard Nissl)
722  Library: Better 2.6 eeprom support
723           Change it87 hyst to low
724           Add 2.6 gl518sm, fscher support
725           Fix 2.6 negative voltages handling
726           Temporary fix to w83l785ts mappings
727  Module adm1025: Separate prefix for NE1619
728  Module adm1026: Remove use of temporary ID
729                  Define addresses as a range
730  Module bmcsensors: Fix reservations
731  Module fscher: Externalize voltage conversions
732  Module eeprom: Remove memtype
733  Module i2c-piix4: Fix resource release error
734                    Various cleanups
735  Program decode-vaio.pl: Add sysfs support
736  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
737                   Drop linux 2.2 support
738                   Add w83627hf
739  Program sensors: Do not show algorithm by default
740                   Cleanup temperature unit display code
741                   Cleanup label spacing code
742                   Fix output to UTF-8 terms (Marcel Sebek)
743                   Simplify gl518sm print
744                   Do not ignore errors in FSC chips prints
745                   Fix w83l785ts print
746                   Cleanup FSC chips prints
747  Program sensors-detect: Fix PATH issues
748                          Correctly point to the fscher driver
749
750
7512.8.3 (20040115)
752  File lm_sensors.spec: Update
753  Library: Add 2.6 eeprom, lm90 support
754           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
755  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
756  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
757  Module i2c-amd756: Fix byte writes
758  Module i2c-tsunami: Cleanups (Daniel Nilsson)
759  Module it87: Fix sg_tlx writes; fix sensor type reporting;
760               add 8712 Super I/O detection;
761               remove initialization of temp_type and fan_ctl;
762               remove init and temp_type module parameters
763  Module lm90: Handle hysteresis differently
764  Module smartbatt: Fix detection, magnitudes, temp
765  Module w83781d: Fix negative voltages
766  Module w83l785ts: New
767  Program eeprog: Make 8 bit mode the default
768  Program fancontrol: Improvements, fixes, support 2.6 kernels
769  Program mkpatch: Add lm75.h
770  Program pwmconfig: Improvements, fixes, support 2.6 kernels
771  Program sensors: Add ASB100 support
772  Program sensors-detect: Add 8712 Super I/O detection;
773                          add W83L785TS detection
774
775
7762.8.2 (20031211)
777  IMPORTANT: Limit initialization removed from all chip drivers!
778             If you didn't run 'sensors -s' in the past you may need to now!
779  File sensors.conf.eg: Change lm75 scaling back to 1;
780                        Add example for asb100
781  Library: Fix bmcsensors scaling, increase number of sensors;
782           Add w83627thf support; Advance version to 3.0.0;
783           Add hermes, ADM1032, ASB100 support;
784           Add it87 sensor type support;
785           Add sysfs support for kernel 2.6;
786           Fix memory leaks
787  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
788             Fail if no kernel .config file exists;
789             Don't build module dependencies for user and user_install
790  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
791          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
792          smsc47m1, thmc50, via686a, w83627hf, w83781d:
793          Remove initialization of limits by driver.
794  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
795  Modules (chip): Init cleanups
796  Module asb100: New
797  Module bmcsensors: Fix voltage scaling, voltage and fan limits
798  Modules ddcmon, eeprom: Add failure printks
799  Module fscher: New (Fujitsu-Siemens Hermes driver)
800  Module i2c-amd756: Fix AMD8111 support
801  Module i2c-amd8111: Fix byte writes
802  Module i2c-nforce2: Fix byte writes
803  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
804  Module i2c-sis630: Sync with 2.6.0-X driver version
805  Module i2c-viapro: Add support for Via 8237
806  Module it87: Add pwm and "smart guardian" support;
807               add it87 sensor type support
808  Module lm75: Fix negative voltages
809  Module lm90: Add ADM1032 support
810  Module w83781d: Fix 791d and 627hf detection
811  Module w83627hf: Add VID support
812  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
813  Program eeprog: New
814  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
815                                       support sysfs for i2c bus search
816  Program i2cdetect: Add -l option to list busses
817  Program i2cdump: Add 'c' mode for consective address reads
818  Program mkpatch: Cleanups
819  Program pwmconfig: Handle multiple fans controlled by a single pwm
820  Program sensord: Remove ddcmon support
821  Program sensors: Add ADM1032 support; add messages for sysfs
822  Program sensors-detect: Prefer Super I/O drivers;
823                          Fix W83627HF and W83791D detection; detect CSB6;
824                          Detect ADM1029, ADM1030, ADM1031;
825                          Detect W83637HF, W83697UF;
826                          Add it87 sensor type support; add sysfs support
827                          Reduce lm80 misdetects; remove PCFxxxx "detection"
828                          Detect VT8237 (KT600)
829                          Use VPD instead of DMI+ACPI for Thinkpad detection
830                          Suggest new asb100 driver instead of w83781d
831
832
8332.8.1 (20031005)
834  NOTE: Requires i2c-2.8.1 or newer!
835  File sensors.conf.eg: Improved adm1025 section
836                        Default temp labels for as99127f
837                        Improved lm83 section
838                        Better support for Asus A7V8X-X
839  File doc/chips/SUMMARY: Add SMSC manufacturer ID
840  File doc/chips/adm1025: Add decent documentation (almost new)
841  File doc/chips/lm83: Known motherboards list update, misc updates
842  Library: Change adm1025 names (hyst/over become low/high)
843           Swap adm1025 temp1 and temp2 to match the driver's order
844           Advance version to 2.0.1
845           Update lm83 support
846           Add support for lm90, xeontemp, max6650
847           Add separate messages for read and write errors
848           Add missing message for parse error
849  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
850  Modules (various): Fix includes for compilation on Alpha
851                     Use the new i2c_delay function instead of the various
852                     do_pause functions
853  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
854  Module i2c-nforce2: Cleanups
855  Module i2c-i810: Use readl/writel for portable access to PCI memory
856  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
857  Module i2c-savage4: Use readl/writel for portable access to PCI memory
858  Module i2c-sis630: Fix detection
859                     Add block data read/write support
860  Module i2c-sis645: Detection method change/bugfix
861  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
862  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
863  Module adm1025: Major driver update
864                  Add support for Philips NE1619
865                  Simplify the driver a lot (unified voltages, unified
866                  temperatures and much more)
867                  Fix default voltage limits
868                  Change default temperature limits
869                  Swap remote and local temperatures to match the internal
870                  registers order (make the code unification possible)
871                  Export remote diode fault through alarms
872  Module ddcmon: Major update
873                 Add half a dozen new features
874                 Add checksum parameter (same as for the eeprom module)
875                 Fix monitor limits
876  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
877  Module lm78: Fix a fan_div/fan_min bug
878  Module lm83: Add t_crit and alarms support
879  Module lm90: New
880  Module max6650: New
881  Module saa1064: New
882  Module smsc47m1: Add support for 47M142
883  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
884                   enhance w83627thf support
885  Module w83781d: Enhance chip detection; clean up error returns;
886                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
887  Module xeontemp: New
888  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
889                           Mark Rambus as unsupported
890  Program decode-edid.pl: New
891                          Interfaces between our eeprom module and
892                          parse-edid from the read-edid project
893  Program p4b_smbus: Fix SMP compilation
894  Program sensord: Add support for IT87 (Mike Black)
895                   Change ADM1025 support to match the changes made to
896                   the library
897  Program sensors: Rewrite and enhance EEPROM support
898                   Change LM83 and ADM1025 support to match the changes
899                   made to the library
900                   Add DRDRAM support to print_eeprom
901                   Exit(1) on /proc write failure (Malte Starostik)
902                   Add LM90, MAX6650 support
903  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
904                          Add support for LM82, LM86, LM89
905                          Improved W83781D family detection
906                          Add support for AS19927F rev.2, ASB100 Bach
907                          Add support for Asus Mozart-2 (3 types)
908                          Add support for NE1619
909                          Add support for FSC Hermes
910                          Make sure /sbin is in the user's path
911                          Fix EEPROM detection
912                          Automatic module.conf and /dev/i2c* detection
913                          Improve LM82 and LM83 detection
914                          Handle "to-be-written" cleanly
915                          Add detection for 47M14x Super I/O
916                          Handle the one-address-many-chips-same-driver
917                          case
918
919
9202.8.0 (20030714)
921  NOTE: Requires i2c-2.8.0 or newer!!!
922  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
923                  2.4.13 or later required for mkpatch.
924  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
925                  i2c package
926  File doc/chips/fscscy: Add watchdog documentation
927  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
928  File sensors.h: Now automatically generated
929  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
930           add adm1026, lm83, lm85, w83791d support;
931           Advance version to 2.0.0
932  Makefiles: Generate warnings if new library won't be found by ld.so;
933             Modules now install in kernel/drivers/i2c/[busses,chips];
934             Ensure that headers in /usr/local/include are used first;
935             Don't use /usr/include headers for modules;
936             Handle multiple UTS_RELEASE definitions in linux/version.h;
937             Automatically generate kernel/include/sensors.h;
938             Remove old gzipped modules; remove old misc directory if empty;
939             Remove pre-2.4 installation method;
940             -Wall now the default;
941             Add new targets user, user_install, and help;
942             Run depmod after module installation
943  Modules (all): Cleanups including
944                - Add #include <i2c-proc.h>
945                - C99 initializers
946                - Remove #ifdef MODULE
947                - Remove #ifndef THIS_MODULE
948                - Remove #ifndef MODULE_LICENSE
949                - Remove other 2.1/2.2 #ifdefs
950                - Remove #include "sensors.h", copy SYSCTL defs to module
951                - Remove excess #includes
952                - Remove argument in i2c_register_entry()
953                - Remove dummy xxx_command() definition
954                - Remove EXPORT_NO_SYMBOLS
955                - Remove init_MUTEX #define
956                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
957                  no longer adjust their own refcounts
958                - Use module_init() and module_exit()
959                - Update to new i2c_driver struct definition
960  Modules (bus PCI): Convert to PCI-module-style initialization
961  Modules (several): Add support for AMD Opteron VRM (VID) encoding
962  Module adm1021: Set alarm on failed reads and report old value;
963                  merge changes from kernel 2.5.54
964  Module adm1026: New
965  Module bmcsensors: Fix compile when DEBUG=1
966  Modules ddcmon, eeprom: Use i2c block reads if possible;
967                          better error handling
968  Module ds1307: Add to Makefile
969  Module gl520sm: Fix temperature over/hyst writes
970  Module lm75: merge changes from kernel 2.5.54
971  Module lm83: New
972  Module lm85: New
973  Module i2c-ali1535: Check for invalid transaction
974  Module i2c-ali15x3: Check for invalid transaction
975  Module i2c-amd756: merge changes from kernel 2.5.54;
976                     check for invalid transaction
977  Module i2c-amd8111: merge changes from kernel 2.5.54
978  Module i2c-i801: Add support for 82801EB (ICH5)
979  Module i2c-i810: Fix for some chips
980  Module i2c-nforce2: New
981  Module i2c-piix4: Check for invalid transaction
982  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
983  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
984        north bridges; SiS962 and SiS963 south bridges
985  Module i2c-viapro: Check for invalid transaction
986  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
987          pwm and pwm enable support; update docs
988  Module smbus-arp: Check adapter for HW or SW PEC support;
989                    add reset option
990  Module w83781d: Add support for w83791d
991  Module w83627hf: New
992  Program decode-dimms.pl: Recognize DDR and Rambus
993  Program eeprom: Fix writes for small eeproms
994  Program eeprom, eepromer: Use local i2c-dev.h for build
995  Program fancontrol: New
996  Program lm_sensors.init: Call sensors -s in start()
997  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
998                   Add adm1026,lm85 support;
999                   Remove sensors.c file; add sensors_compat.h;
1000                   Remove patches to i2c-core.c and drivers/char/mem.c;
1001                   Now works only for kernels 2.4.13 or later
1002  Program p4b_smbus: Fix 'make install';
1003                     Install in same place as other modules;
1004                     Clear correct bits in config word
1005  Program pwmconfig: New
1006  Program sensors: add adm1026, lm85, w83791d support
1007  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1008                          w83627hf, w83627thf, w83697hf);
1009                          Add support for SiS651, SiS961, SiS745, SiS746;
1010                          Support dmidecode 2.0 and later;
1011                          Fix "C" format error;
1012                          Add support for adm1026, 82801EB (ICH5), W83791D;
1013                          Add support for w83l785ts, nForce2;
1014                          Fix UTF-8 incompatibility;
1015                          Better support for lm75;
1016                          Add support for lm83
1017
10182.7.0 (20021208)
1019  NOTE: Requires i2c-2.7.0 or newer.
1020  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1021  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1022  File doc/busses/i2c-sis645: Add license
1023  File doc/chips/lm92: Add license, features
1024  File doc/chips/maxilife: Add license, parameters, features
1025  File doc/chips/smartbatt: Complete rewrite
1026  File doc/chips/vt8231: Add license, parameters
1027  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1028  Library: Add support for MC1066; add multiple VRM version support for lm87;
1029           enhance adm1023 support; initial support for Sony Vaio eeprom;
1030           add support for bmcsensors; add hacks for additional dummy drivers
1031  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1032            add flags for x86_64 compiles
1033  Module adm1021: Add support for MC1066
1034  Module bmcsensors: New
1035  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1036                   kernel 2.5.43; fix 2.2 kernel compiles
1037  Module gl518sm: Iterate allowed only for rev 0x00
1038  Module i2c-amd756: Configure base address for nForce support;
1039                     check for uninitialized base address;
1040                     add support for amd8111 (SMBus 1.0)
1041  Module i2c-amd8111: New (SMBus 2.0)
1042  Module i2c-ipmb: New
1043  Module i2c-ipmi: New
1044  Module i2c-keywest: Sync with kernel 2.4.20
1045  Module i2c-sis630: Add support for SiS730
1046  Module i2c-sis645: Improve support for SiS645/961;
1047                     add support for SiS645DX/961 and SiS735;
1048                     fix 2.2 kernel compiles
1049  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1050  Module lm87: Add multiple VRM version support
1051  Module vt1211: Fix inx limits and alarms; fix in0
1052  Module vt8231: Fix inx limits and alarms; fix in0
1053  Module w83781d: Fix in0/in1 initialization
1054  Module smartbatt: New
1055  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1056  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1057                           stop decoding on checksum error
1058  Program dmidecode: Fix read bug; upgrade to version 1.8
1059  Program doc-insmod: Complete rewrite; fix author output
1060  Program doc-features: Complete rewrite; handle missing sysctl entries;
1061                        handle unknown prefix with suggestion
1062  Program lm_sensors.init: Remove spaces bug; add green/red output
1063  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1064  Program rrd: Add sanity limits to newly-created RRD.
1065  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1066  Program sensors: Add support for MC1066, Rambus Rimms;
1067                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1068                   initial support for Sony Vaio eeprom
1069  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1070                          IPMI, AMD8111; add help if no sensors found;
1071                          add ACPI method for IBM system detection;
1072                          work with old Perl versions again;
1073                          initial support for Sony Vaio eeprom
1074
10752.6.5 (20020915)
1076  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1077  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1078  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1079  Module dmi_scan: new
1080  Module ds1621: Fix enable/disable
1081  Module eeprom: Do not corrupt 24RF08's when checksum=1
1082  Module i2c-i801: Check for uninitialized base address;
1083                   enable if not enabled
1084  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1085  Module i2c-sis630: new
1086  Module i2c-sis645: new
1087  Module lm92: Fix in-kernel initialization
1088  Module via686a: Remove VT8231 support
1089  Module vt8231: new
1090  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1091  Program dmidecode: new
1092  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1093  Program mkpatch: Add Config.in entries for, lm92,
1094                   pcf8574, pcf8591, smsc47m1, vt1211;
1095                   add dmi_scan
1096  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1097  Program lm_sensors.init: fix stop()
1098  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1099                   add support for logging loadavg in RRD;
1100                   fix down-converting raw labels for RRD;
1101                   update chip support, still behind sensors
1102  Program sensors: Add /usr/local/etc to config file path;
1103                   fix -c and -u flags; add vt8231
1104  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1105                          refuse to run on IBM systems;
1106                          fix sysconfig module numbering;
1107                          change quick write to not corrupt 24RF08's
1108
11092.6.4 (20020719)
1110  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1111  File doc/vid: New
1112  File include/sensors_vid.h: New
1113  File sensors.conf.eg: Add vt1211, smsc47m1
1114  Library: Add multiple VRM version support for adm1025, w83781d;
1115           fix 'flex scanner jammed' on some systems;
1116           add vt1211, smsc47m1, lm92;
1117           fix access mode checking
1118  Makefiles: For 2.4+ kernels, modules now install in
1119             kernel/drivers/[i2c,sensors] , not misc/ , and
1120             'make install' removes old versions in misc/ .
1121             Use $CFLAGS and $CPPFLAGS if defined.
1122  Module adm1025: Add multiple VID version support
1123  Module ds1307: new
1124  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1125                     reliability improvements
1126  Module i2c-hydra: Flush posted writes
1127  Module i2c-i801: Add support for 82801DB (ICH4)
1128  Module i2c-i810: Flush posted writes
1129  Module i2c-savage4: new
1130  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1131  Module i2c-voodoo3: Flush posted writes
1132  Module ds1307: New
1133  Module lm92: New
1134  Module smbus-arp: new
1135  Module smsc47m1: new
1136  Module via686a: Add support for VT8231 sensors
1137  Module vt1211: new
1138  Module w83781d: Add multiple VID version support; fix temp alarms
1139  Program eeprom: new
1140  Program i2cdump: Add smbus block command specification, add PEC support
1141  Program lm_sensors.init: new
1142  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1143                   pcf8574, pcf8591, smsc47m1, vt1211
1144  Program p4b_smbus: Add support for ICH4
1145  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1146  Program sensord.init: Renamed, was prog/init/sensors
1147  Program sensord: Major update, now requires rrd source;
1148                   not compiled by default
1149  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1150                   (don't display algo. and adap.) option;
1151                   add vt1211, smsc47m1, lm92
1152  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1153                          add 82801DB, LM85; fix perl warnings;
1154                          generate /etc/sysconfig/lm_sensors for
1155                          lm_sensors.init script
1156
11572.6.3 (20020322)
1158  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1159  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1160  File doc/chips/it87: add more temp_type help
1161  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1162                        add adm1021 section; add lm87 AIN[1,2] template;
1163                        swap negative voltage limits for 782d,783s,627hf,
1164                        697hf,it87; add more it87 help; swap neg. voltage
1165                        limits for lm78(-j), lm79, w83781d, as99127f
1166  Library: Add PCF8591, W83697HF, ADM1023 support;
1167           fix w83* fan_min computes;
1168           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1169  Module adm1024: Add MODULE_LICENSE("GPL")
1170  Module bt869: Add s-video out and DVD resolution support
1171  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1172  Module fscscy: implement min/max for voltages and fans
1173  Module i2c-amd756: Add support for AMD768
1174  Module i2c-i810: Add support for 810E
1175  Module i2c-keywest: Big update, sync with kernel 2.4.18
1176  Module i2c-piix4: Check for uninitialized base address
1177  Module i2c-sis5595: Blacklist 645, 735
1178  Module i2c-viapro: Check for uninitialized base address
1179  Module gl518sm: Standardize /proc entries in0-3
1180  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1181               fan -> fan1; fix temp2 limit writes
1182  Module pcf8574: Add support for PCF8574A; /proc interface changed
1183  Module pcf8591: new
1184  Module sis5595: Blacklist 645, 735
1185  Module w83781d: Add W83697HF support; allow force_subclients parameter
1186                  for Tyan 2460
1187  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1188  Program decode-vaio.pl: new
1189  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1190                   add text output
1191  Program init/sensors: New SysV init script
1192  Program mkpatch.pl: Add support for fscscy, add more help entries
1193  Program p4b_smbus: new
1194  Program rrd: Install summ_week.cgi
1195  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1196                   clean up chassis intrusion prints
1197  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1198                          fix Via686a and it87 detection;
1199                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1200                          fix uninitialized values; it87 beats lm78
1201
12022.6.2 (20011118)
1203  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1204  Chip Modules (all): malloc.h -> slab.h
1205  Modules (all): Add MODULE_LICENSE("GPL")
1206  File doc/FAQ: More updates and additions
1207  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1208  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1209           update it87 alarm ID's.
1210  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1211  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1212  Module i2c-amd756: Improve busy handling/printk's
1213  Module i2c-i801: Add 82801CA/CAM support
1214  Module i2c-keywest: Sync with PPC people, it works now
1215  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1216  Module i2c-viapro: Add Via VT8233 support
1217  Module it87: Merge alarm_* /proc entries to alarms
1218  Module sis5595: Fix support for rev B0
1219  Module via686a: Make limit initializations reliable
1220  Module w83781d: Allow init=0 parameter to bypass initialization
1221  Program isadump: Add flat address space (PCI) support
1222  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1223                      fscpos, it87, maxilife, mtp008
1224  Program sensors: Fix w83781d temp precision
1225  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1226                          Fujitsu Poseidon and Scylla,
1227                          Intel 82443MX and 82801CA/CAM detection,
1228                          add ITE 8172G detection (driver in kernel 2.4.10)
1229
12302.6.1 (20010830)
1231  File BUGS: Updated
1232  File doc/FAQ: More updates and additions
1233  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1234  File sensors.conf.eg: Fix/enhance it87 section
1235  Library: ds1621 and it87 updates
1236  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1237  Module i2c-amd756: Add AMD 766 support
1238  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1239  Module i2c-piix4: Add Serverworks CSB5 support
1240  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1241  Module adm1025: Fixed temp2 min/max writes
1242  Module ds1621: Add 12-bit precision mode
1243  Module it87: Enable all alarms, add in8 support, add sensor type selection
1244  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1245                  remove support for module
1246  Module sis5595: Recognize unsupported chips and refuse to load
1247  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1248  Program eepromer: new
1249  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1250                      of sensors.c as a module in kernel
1251  Program sensors: it87 updates; adjust temp. precision for some chips
1252  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1253                          recognize unsupported SiS chips;
1254                          recognize AMD 766 and Serverworks CSB5.
1255
12562.6.0 (20010612)
1257  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1258        If your make fails because it can't find <linux/i2c-proc.h>, you
1259        forgot this step!!!
1260  File doc/FAQ: Many, many updates and additions
1261  File doc/busses/i2c-sis5595: new
1262  File doc/busses/i2c-tsunami: new
1263  File doc/chips/it87: new
1264  File doc/chips/via686a: Claim support for 686b.
1265  File README.thinkpad: new
1266  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1267                        Add lm87, adm9240, ds1780, lm81 templates;
1268                        Enhance help comments in file;
1269                        Add Tyan S2510 dual-MTP008 example;
1270                        Make separate sis5595 section.
1271  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1272  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1273  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1274           Add support for maxilife-nba and amd1024;
1275           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1276  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1277  Chip Modules (all): Change from sensors_* to i2c_* globals
1278                      for new i2c-proc.[ch]
1279  Makefiles: enhance to support Alpha architecture
1280  Module adm1021: Fix lm84 and gl523sm support
1281  Module adm1024: new
1282  Module i2c-i801: Chip detection cleanup
1283  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1284  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1285  Module i2c-tsunami: New
1286  Module i2c-via: Ensure i2c bus is tristated correctly.
1287  Module it87: new driver for IT8705, IT8712, Sis950 chips
1288  Module lm78: Recognize chipid=0x20
1289  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1290  Module mtp008: Fix temp initializations;
1291                 Save BIOS pin configuration of temps and fans;
1292                 Fix sensor type reads/writes and fan min writes;
1293                 Fix spurious invalid sensor type messages
1294  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1295                  used for patched kernel now.
1296                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1297  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1298                  Allow force_addr=0xaddr
1299  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1300  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1301                  reading changes; Add messages for subclient
1302                  registration failure
1303  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1304  Program i2cset: new
1305  Program isadump: fix for Alpha arch. compiles
1306  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1307                      Remove ltc1710; Fix i2c_sis5595 typo;
1308                      Support kernel 2.4.5 makefile change;
1309                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1310  Program sens_update_rrd: new
1311  Program sensord: Add -d (debug) and -p (pid-file) options
1312  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1313                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1314                   Change mtp008 temps from max/min to limit/hyst;
1315                   Add maxilife-nba, adm1024, it87 support.
1316  Program sensors-detect: Recognize lm78 with chipid=0x20;
1317                          Recognize SMSC Victory66 South Bridge;
1318                          Add devfs /dev/i2c/x support;
1319                          Add adm1024, it87xx support; Add thinkpad warning.
1320  Program tellerstats: new
1321
13222.5.5 (20010115)
1323  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1324        you have kernel 2.4.0-prerelease or greater.
1325  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1326  File doc/developers/proc: new
1327  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1328  Library: Add ds1621, mtp008 support
1329  Module adm1021: Add support for adm1021a / adm1023
1330  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1331  Module adm1025: Add support for remote temp; rename /proc entries to
1332                  in[0-5] and temp[1-2]; fix negative temp readings
1333  Module adm9240: Rename /proc entries to in[0-5]
1334  Module ddcmon: allow force and force_ddcmon parameters
1335  Module ds1621: new
1336  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1337  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1338  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1339  Module lm87: cleanup, update voltage calculations
1340  Module mtp008: new
1341  Module pcf8574: change update time to 5 seconds
1342  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1343  Module w83781d: fix beep setting via /proc
1344  Programs editticket, readticket: new
1345  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1346  Program mkpatch.pl: more fixes; now adds many more modules
1347  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1348                   add adm1025 temp2; report temp limits correctly as
1349                   min/max or limit/hysteresis; print message if no
1350                   sensors are found. Removed false errors from lm87 reads.
1351  Program sensors-detect: Add ds1621, mtp008 detection;
1352                          add ServerWorks detection
1353
13542.5.4 (20001012)
1355  Module i2c-viapro: Add support for Via 596B (0x3051)
1356  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1357  Program mkpatch.pl: fixed infinite loop
1358  Program sensors-detect: Detect Via 596B (0x3051)
1359
13602.5.3 (20001008)
1361  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1362  File useful_addresses.html: update
1363  Library: Add lm87 support
1364  Module pcf8574: new
1365  Module i2c-ali1535: new
1366  Module i2c-ali15x3: removed force #ifdef.
1367  Module i2c-i801: support Intel 82801BA (815E chipset)
1368  Module i2c-i801: add i2c block write support, fix smbus block bugs
1369                   (requires i2c 2.5.3 package)
1370  Module i2c-i810: support Intel 82815
1371  Module lm87: new
1372  Module sensors: Fix for kernel 2.4.0-test8
1373                  (remove copy_to_user_ret and put_user_ret)
1374  Module w83781d: limit fan divisors to 8 max. for as99127f
1375  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1376  Program i2cdump: Add smbus block read support
1377  Programs i2cdetect, i2cdump: Improve error reporting
1378  Program sensors: new switch -u (--unknown)
1379  Program sensors-detect: detect Intel 82801BA (815E chipset)
1380  Program sensors-detect: detect Intel 82815
1381  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1382  Program sensors-detect: detect National LM87
1383  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1384  Program sensors-detect: Improve error reporting
1385
13862.5.2 (20000709)
1387  File sensors.conf.eg: Fix lm80 in8 calculation
1388  Module w83781d: W83783S no longer crashes on unloading
1389  Program sensors-detect: more robustness in case of unknown i2c adapters
1390  Program sensors-detect, libsensors: fix eeprom size reporting
1391  Program sensord: more flexibility, support for alarm scanning etc.
1392  Program sensors: support for ignore setting on sensor alarms.
1393  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1394
13952.5.1 (20000618)
1396  Library: Add adm1025 support
1397  Module adm1025: new
1398  Module ddcmon: Fixed bus scan which could hang SMBus
1399  Module i2c-keywest: new
1400  Module maxilife: Add support for Maxilife '99 (NBA)
1401  Module via686a: Enable sensors if not enabled by BIOS
1402  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1403  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1404  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1405  Module w83781d: Fis as99127f fan speed (was 66% too high)
1406  Module w83781d: Improve beep input checking
1407  Program i2cdump: Add Winbond-style bank selection
1408  Program isadump: Add Winbond-style bank selection
1409  Program sensors: Add adm1025 support.
1410  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1411  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1412  File sensors.conf.eg: Add Maxilife '99 entries
1413  File sensors.conf.eg: Remove some as99127f entries.
1414    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1415          won't reinstall it) or else 'sensors -s' will fail.
1416
14172.5.0 (20000312)
1418  Dropped all kernel 2.0 and 2.1 compatibility
1419  Module i2c-i810: new
1420  Module ddcmon: new
1421  Module via686a: new
1422  Module i2c-amd756: fixed region request
1423  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1424  Module w83781d: Don't change pin settings at initialization;
1425                  also fix chip detection.
1426  Library: Support for ddcmon and via686a
1427  Program sensors-detect: Support for ddcmon and via686a
1428  Program sensors: Support for eeprom, ddcmon and via686a
1429
14302.4.5 (20000116)
1431  Introduced DESTDIR installation prefix
1432  Module lm80: fixes, temperature now read and set correctly
1433  Module i2c-voodoo3: driver enhancements
1434  Module w83781d: fixes, AS99127 works much better now
1435  Library: New ignore keyword in config file
1436  Programs: Support for new ignore keyword
1437  Program sensors-detect: Support for MGA detections
1438
14392.4.4 (19991201)
1440  Addition of the alpha release of AMD 756 SMBus host support.
1441  Many fixes and updates to the gl518sm driver
1442  Updates and fixes for device detection
1443
14442.4.0 (19990920)
1445  Too much to list.
1446  i2c and smbus parts are split off to a separate i2c package.
1447  New drivers and other stuff.
1448
14492.3.4 (19990616)
1450  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1451  All: Now compiles against kernel 2.0.x (again ;)
1452  Module gl518sm: some updates and refinements
1453
14542.3.3 (19990603)
1455  All: Now compiles against kernel 2.3.x (x >= 1)
1456  Module i2c-voodoo3: Timing issue fixes
1457  Module bt869: Seems to be functional and relatively well tested
1458  Many modules were modified to be more compatible with the new
1459   Mutex structure in the new experimental kernels.
1460
14612.3.2 (19990507)
1462  Module i2c-hydra: Now compiles on 2.0.x kernels
1463  Module i2c-lm75: Slightly better detection
1464  * New, but not compiled by default:
1465  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1466  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1467
14682.3.1 (19990501)
1469  All: Now compiles on PPC
1470  Module i2c-hydra: NEW
1471  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1472  Module w83781d: Removed deadlock (mutex was not initialized)
1473  Documentation: A few glitches removed
1474  Makefile: default module installation directory is now
1475            /lib/modules/current/extra/misc
1476  Program sensors-detect: PPC Hydra now detected
1477  Program sensors: Now prints complete GL518SM information
1478  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1479
14802.3.0 (19990422)
1481  All: Many, many changes and improvements
1482  All: Many small bugs and problems removed
1483  Modules: New insmod parameters
1484  Modules: Much improved chip detection
1485  Module maxilife: NEW
1486  Module adm1021: MAX1617A now also supported
1487  Module adm9240: DS1780 now also supported
1488  Module w83781d: W83782D and W83783S now also supported
1489  Program sensors-detect: NEW
1490  Library: All chips now supported
1491  Documentation: Very much improved
1492
14932.2.2 (199903??)
1494  Just some minor updates and bug fixes.
1495
14962.2.1 (19990218)
1497  All: Removed compile warnings
1498  Module i2c-dev: Small bug removed if DEBUG=1 was used
1499  Module sis5595: Now compiles for 2.0 kernels
1500  Module adm1021: Detection corrected
1501
15022.2.0 (19990216)
1503  All: Set copyrights to include 1999
1504  All: Small bugfixes
1505  I2C: Upgraded to newest archive of Simon Vogl
1506  Module i2c-dev: NEW
1507  Module i2c-ali15x3: NEW
1508  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1509     directories, and somewhat improved
1510  Module sis5595: NEW
1511  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1512  Library: Support for new chip drivers, several small bugs fixed
1513  Library manual pages: NEW
1514  Program i2cdetect: Moved to detect directory
1515  Program detect.pl: NEW
1516  Program doc-features: NEW
1517  Program sensors: Added man-page
1518  Document BUGS: Added cdrom bug and kernel i2c conflict
1519
15202.1.2 (19990116)
1521  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1522  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1523  Documentation in doc/kernel: NEW
1524
15252.1.1 (19990107)
1526  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1527                     and older
1528  Module gl518sm.o: Miscelaneous bugs and problems solved
1529  Program isadump: NEW
1530
15312.1.0 (19981230)
1532  Library: Completely NEW
1533  Program sensors: NEW
1534  Program grab_busses: NEW
1535  Program decode-dimms: More information
1536  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1537  Module w83781d.o: NEW
1538  Module lm80.o: NEW
1539  Module gl518sm.o: new procfile beep, several small updates
1540  Modules: Now use pin readings, no more scaling within the kernel (use the
1541           library instead)
1542
15432.0.2 (19981214)
1544  Module eeprom.o: NEW
1545  Program decode-dimms: NEW
1546  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1547           2.1.58
1548  Modules: Somewhat less verbose on transfers
1549  Module lm78.o now recognizes and handles lm78-j and lm79
1550
15512.0.1 (1998121?)
1552  Module gl518sm.o updates, to make it actually work
1553  Module lm75.o high/low-byte swapping write bug fixed
1554
15552.0.0 (19981209)
1556  Initial release
Note: See TracBrowser for help on using the browser.