root/lm-sensors/trunk/CHANGES @ 4126

Revision 4126, 71.8 KB (checked in by khali, 8 years ago)

decode-edid.pl: Append /usr/sbin or /usr/local/sbin to $PATH if needed.
This is needed because parse-edid is typically installed in one of these
directories, even though any user can use it.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
42.10.1 (2006????)
5  File doc/busses/i2c-piix4: Update (2.6 backport)
6  File doc/developers/sysfs-interface: Update
7  File etc/sensors.conf.eg: Add an smsc47m192 section
8                            Comment out all set statements
9                            Add an it8716 section
10                            Add a w83793 section
11  Library: Fix device scan when no i2c support is present
12           Add support for W83627EHF voltage inputs and alarms
13           Add support for the smsc47m192 driver
14           Fix all memory leaks (yeah!)
15           Fix no sensors being reported as an error
16           Add support for the IT8716F and IT8718F chips
17           Add support for the W83793 chip (Yuan Mu)
18           Map the 2.6 adm1026's fan8 to fan0
19  Makefile: Don't grep autoconf.h on user-space targets
20            Fix depmod on non-running kernel version
21  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
22  Module i2c-amd756-s4882: Improve static semaphore initialization
23                           (2.6 backport)
24  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
25                   Add ICH8 support (2.6 backport)
26                   Fix block transaction poll loops (2.6 backport)
27                   Remove PCI function check (2.6 backport)
28                   Cleanups (2.6 backport)
29  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
30  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
31                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
32                    Drop the fix_hstcfg parameter (2.6 backport)
33  Module i2c-viapro: Fix compilation with kernels < 2.4.21
34                     Add VT8237A and VT8251
35  Module lm83: Add LM82 support (2.6 backport)
36  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
37                  Add specific alarm and beep defines for the W83791D
38  Module w83792d: Fix PWM range (2.6 backport)
39  Program decode-dimms.pl: Decode depending on the memory type
40                           Decode the manufacturing date to an ISO8601 date
41                           Add the memory size computation and provide brief
42                            timing characteritics for SDRAM/DDR/DDR2 memory
43                           Add memory size computation for Rambus memory
44                           Various output cleanups and fixes
45  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
46  Program i2cdetect: Add a mode to print adapter functionalities
47  Program i2cdump: Restore bank after bank switching
48                   Add new mode W (read word on even register addresses)
49  Program mkpatch: Fix typo breaking f71805f
50  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
51                   Add smsc47m192 support
52                   Add abituguru support (Hans de Goede)
53                   Fix memory leak when printing an unknown chip
54                   Add it8716 and it8718 support
55                   Make each it87 fan and fan div optional
56                   Print missing w83791d values
57                   Add w83793 support (Yuan Mu)
58  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
59                          Add ATI IXP200/300/400 SMBus detection
60                          Prevent warning on 64-bit PCI addresses
61                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
62                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
63                           F75384S/M, F75387SG/RG and F81218D detection
64                          Add Winbond W83793R/G and W83627DHG detection
65                          Handle the W83791D driver difference between kernels
66                          Add nForce4 MCP04, MCP51 and MCP55 detection
67                          Add AMD Geode devices detection
68                          Add ITE IT8716F and IT8718F detection
69                          Add NatSemi/Winbond PC87427 detection
70                          Get driver information for busy addresses from
71                           sysfs (2.6 only)
72                          Drop the ISA IT87xxF detection
73                          Check i2c adapter functionalities before probing
74                          Add Intel ICH8 SMBus detection
75                          Add AMD K8 thermal sensors detection
76                          Simplify detection of SiS5595, VIA686 and VT8231
77                          Add Analog Devices ADM1033, ADM1034, ADT7462,
78                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
79                          Check for root user at startup
80                          Attempt to be slighly more user-friendly
81                          Add VT8237A and VT8251
82
83
842.10.0 (20060214)
85  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
86  File doc/busses/i2c-viapro: Update (2.6 backport)
87  File doc/chips/via686a: Update (2.6 backport)
88  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
89  File etc/sensors.conf.eg: Do not set vrm by default
90  File i2c-dev.h: Fix union i2c_smbus_data definition
91                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
92                  Add missing parentheses around macros
93                  Drop I2C_FUNC_SMBUS_EMUL
94                  Drop I2C_FUNC_SMBUS_*_PEC
95                  Drop I2C_SMBUS_*_PEC
96  File sensors_vid.h: Drop default VRM
97  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
98           This is intentional.  Use decode-dimms.pl if you still
99           need your memory SPD data.
100  Library: Big update to use libsysfs.  More TODO though.
101           Fix bus matching code for Linux 2.6 (Karsten Petersen)
102           Add f71805f, w83687thf support
103           Add platform drivers support
104           Fix sysctl warnings on x86_64
105           Restore vt1211 temp1
106  Makefile: Compile user-space programs with -Wundef
107  Module i2c-i801: Simplify the hardware PEC code
108                   Always set PEC mode explicitly before each transaction
109  Module i2c-i810: Documentation update, PCI IDs cleanup
110  Module i2c-keywest: Remove bus probing code (2.6 backport)
111  Module i2c-nforce2: Remove dead code (2.6 backport)
112                      Add the ID of the nForce4 MCP-04 (2.6 backport)
113  Module i2c-via: Remove dead code
114  Module i2c-viapro: Remove dead code
115                     Support I2C block read (2.6 backport)
116                     Code cleanups (2.6 backport)
117                     Improve debug register dump (2.6 backport)
118  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
119          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
120          i2c-sis645: Use pci_driver name to request I/O region; do
121                      not initialize i2c_adapter name to "unset" (2.6
122                      backport)
123  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
124                                              (2.6 backport)
125  Module adm9240: Cleanups (2.6 backport)
126  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
127  Module it87: Minor cleanups
128               Fix fan3_div setting bug (Anton V. Staaf)
129  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
130               Separate the register read function
131               Add PEC support for the ADM1032
132  Module via686a: Cleanups
133  Module w83627hf: Drop useless initialization step (2.6 backport)
134                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
135                   Fix alarms (Yuan Mu)
136                   Preserve fan min on fan div change (Yuan Mu)
137                   Properly handle W83627THF without VID (Yuan Mu)
138                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
139                   Add W83687THF support
140  Module w83781d: Drop W83697HF support (Grant Coady)
141  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
142                  Fix fan control mode (PWM/DC) reporting
143                  Fix fan div auto-adjust (Yuan Mu)
144                  Fix the subclient handling
145  Module w83l785ts: Minor cleanup (2.6 backport)
146  Module vt1211: Restore temp1
147  Modules vt1211, vt8231: Change default VRM to 9.1
148  Program decode-dimms.pl: Add lookup tables for manufacturer names
149                           Fix rounding error in PCxxxx speed computation
150                           Improve text output
151                           Improve speed under Linux 2.6
152                           Verify checksum before decoding anything
153                           Improve manufacturing location decoding
154                           Improve memory type detection
155                           Improve part number decoding
156  Program i2cdump: Drop now useless #ifdef tests
157                   Fix capability check for continuous byte mode
158  Program i2cget: New
159  Program i2cset: Add PEC support
160                  Fix argc check
161  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
162                                       Print the correct bus type if bus
163                                       functionality can be queried
164  Program isadump: Display the real addresses in flat mode
165  Program mkdev.sh: Silently skip already existing nodes
166  Program mkpatch: Include f71805f
167  Program sensord: Do not log algorithm names
168                   Drop EEPROM support (Aurelien Jarno)
169                   Add W83627EHF, F71805F/FG support
170                   Fix PC87365/PC87366 alarms
171  Program sensors: Drop free_the_label
172                   Fix compilation with uclibc (no iconv)
173                   Add f71805f, w83687thf support
174  Program sensors-detect: Drop algorithm names
175                          Do not rely on i2cdetect -l printing algo names
176                          Simplify adapter name matching mechanism
177                          New address for ADM1032, ADT7461
178                          Improve ADT7467, ADT7468 support
179                          Fix MAX6659 reported driver
180                          Add Fintek F71805F detection
181                          Add Analog Devices ADT7476 detection
182                          Add Intel 82845G detection
183                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
184                          Fix udev detection in some corner case
185                          Improve DS1621 detection
186                          Always prefer ISA access over SMBus access
187
188
1892.9.2 (20050906)
190  File doc/chips/*: Big update (2.6 backport)
191  Library: Drop ds1780-specific code (now use adm9240)
192           Fix memory leak in sensors_get_label()
193           Support /sys/class/hwmon (Linux 2.6.14+)
194           Limit stack usage in sensors_read_proc_chips()
195  Makefile: Detect 2.6+ kernels and check targets
196  Man page isaset.8: Fix typos
197  Module adm1031: Fix broken kfree() calls
198  Module i2c-ali1563: New (2.6 backport by Winbond)
199  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
200  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
201          w83627hf.c: Tag find function __init
202  Module lm93: Fix memory leak
203  Module smsc47m1: Fix PWM enable polarity on read
204  Modules w83627hf, w83781d: Allow setting fan divisor to 128
205  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
206                           Added DDR/DDR2 frequency reporting in convenient
207                           form of DDRxxx PCyyyy
208  Program i2cdump: Properly handle short i2c block reads
209  Program fancontrol.pl: Fix compile errors
210  Program mkpatch: Include i2c-ali1563
211                   Include w83792d
212  Program pwmconfig: Fix unsafe temporary file use
213  Program rrd: Support 2.6 kernels
214  Program sensord: Add support for w83637hf
215                   Support pc87360 (Henrik Brix Andersen)
216  Program sensors: Support the VAIO "VGN" prefix for eeprom
217  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
218                          Advertise the w83792d driver
219                          Improve IT8705F and IT8712F detection
220                          Merge LM82 and LM83 detection
221                          Add W83687THF detection
222
223
2242.9.1 (20050412)
225  File doc/busses/i2c-nforce2: Update
226  File doc/chips/it87: Update
227  File doc/chips/lm90: Update for adt7461
228  File doc/chips/mic74: New
229  File etc/sensors.conf.eg: New sections for lm92 and w83792d
230  Library: Add support for 2.6 fscpos driver (Stefan Ott)
231           Fix sis5595 in4 (Aurelien Jarno)
232           Add support for 2.6 gl520sm driver (Maarten Deprez)
233           Add support for 2.6 bmcsensors driver (Yani Ioannou)
234           Add support for w83792d (Chunhao Huang/Winbond)
235           Add support for 2.6 adt7461 (James Chapman)
236           Add support for 2.6 lm92
237           Add support for 2.6 vt1211
238           Add preliminary support for 2.6 w83627ehf
239  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
240            Use -fno-strict-aliasing on all architectures
241  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
242  Module bmcsensors: Fix compile error
243                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
244  Module ds1621: Fix detection (Aurelien Jarno)
245  Module eeprom: Discard SPD-centric checksum module parameter
246                 Cleanup detection function (backport from Linux 2.6)
247  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
248  Module i2c-i801: Temporarily disable broken I2C block read
249  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
250                   Gelato)
251  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
252  Module i2c-viapro: Prevent repeated resets
253  Module it87: Improve Super-I/O detection
254               Limit I2C address range
255               Support VID on the IT8712F
256  Module lm75: Only initialize CMP/INT bit
257  Module lm78: Fix bug with setting negative temperature limits
258  Module lm85: Properly differentiate between ADM1027 and ADT7463
259               Add EMC6D102 support
260  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
261               Add limited ADT7461 support
262  Module lm93: Fix IN10 (+5V) scaling
263  Module mic74: New
264  Module w83627hf: Support secondary Super-I/O address
265                   Enable temp2 and temp3 if they are disabled
266  Module w83781d: Revert AS99127F temp2 and temp3 computation change
267                  Skip final initialization step for AS99127F chips
268  Module w83792d: New (Chunhao Huang/Winbond)
269  Program ddcmon: New; user-space replacement for the ddcmon driver
270  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
271  Program isadump: Handle Super-I/O keys
272  Program lm_sensors.init: Cleanups (Axel Thimm)
273  Program mkdev.sh: Add basic command-line interface
274  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
275  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
276                     Don't complain about read-only enable files (lm85)
277                     Fix handling of alternate config file name
278  Program sensord: Fix erroneous error message (Aurelien Jarno)
279                   Support sis5595 in4 (Aurelien Jarno)
280                   Support w83627thf
281                   Support the separate it8712 prefix (Aurelien Jarno)
282  Program sensors: Display sis5595 in4 (Aurelien Jarno)
283                   No errors on missing pc87360 fans
284                   Add gl520sm support (Maarten Deprez)
285                   Improve vt1211 error/ignore handling (Michael Carland)
286                   Support w83792d, w83627ehf
287  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
288                          Improve IT8705F and IT8712F detection
289                          Improve udev detection
290                          Fix DS1621 detection
291                          Add W83627EHF detection
292                          Add ATI SMBus detection
293                          Add VT1211 alias detection
294                          Warn if chip modules not found
295                          Add i2c-ipmi to list if bmcsensors is on it
296                          Add PC87591 detection
297                          Search for correct udev db file name
298                          Add nForce3 250Gb and nForce4 detection
299
300
3012.9.0 (20041228)
302  NOTE: Requires i2c-2.9.0 or newer!
303  File README.thinkpad: Update
304  File doc/chips/it87: Cleanups
305  File doc/chips/lm63: New
306  File etc/sensors.conf.eg: Set via686a voltage limits
307  File kernel/chips/Module.mk: Resync module list with mkpatch
308  File kernel/include/sensors_compat.h: Define __devexit_p if missing
309                                        (kernels 2.4.16 and older)
310  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
311                             and dec_use removed in release 2.8.0
312  Modules (all chip drivers): Remove owner from i2c_driver; pass
313                              controlling_mod to i2c_register_entry() again
314  Module bmcsensors: Support function 1/x
315  Module i2c-amd756: Display the real bus name
316  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
317  Module i2c-i801: Support i2c block read (ICH5 and higher)
318                   Add PEC support for ICH6
319                   Add support for ICH7
320  Module i2c-ipmb: Remove from build since it doesn't work
321  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
322  Module icspll: Fix compilation
323  Module lm63: New driver for the National Semiconductor LM63
324  Module lm83: Use signed types for temperatures
325               Check limits on register writes
326  Module lm87: Round voltages properly
327               Retry on read errors (David Knierim)
328               Less agressive init (no reset)
329  Module lm90: Use signed types for temperatures
330               Check limits on register writes
331  Module lm93: Added module parameter for VID pin input thresholds.
332               Fix typo in dynamic VID alarms
333               Adds a couple log messages for failed transactions (David
334               Knierim)
335               Fix compilation breaking C99-ism (Axel Thimm)
336               Fix block read retries
337  Module pc87360: Support secondary Super-I/O address
338  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
339  Library: Add lm63 support
340           Add lpc47b397 support
341  Programs *.init: Rename lockfile to match file name
342  Programs i2cset, isaset: Written byte/word can be masked
343  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
344  Program mkpatch: Include i2c-amd756-s4882
345  Program pwmconfig: Handle new (well, back to old) pwm files names for
346                     Linux 2.6.10 and up
347  Program sensord: Do not scale load average (Aurelien Jarno)
348  Program sensors: Add lm63, lpc47b397 support
349                   Support DDR2 memory module EEPROMs (Rudolf Marek)
350                   Support only one location for the default configuration file
351                   Display the default configuration file location in --help
352                   Simplify the configuration file opening code
353  Program sensors-detect: Improve LM63 detection
354                          Discard IBM Thinkpad detection code
355                          Add PCA9556, LPC47B397, ICH7 detection
356                          Fix W83792D detection, add W83791SD detection
357
358
3592.8.8 (20041007)
360  File doc/donations: Update
361  File doc/lm_sensors-FAQ.texi: Add 4.6.1
362                                Update 4.7
363  File doc/chips/gl518sm: Update "iterate" info
364  File doc/chips/it87: Discard outdated module parameters
365  File doc/chips/lm75: LM77 is not supported
366  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
367  File doc/chips/lm93: New
368  File doc/chips/w83l785ts: Improvements
369  File etc/sensors.conf.eg: Fix it87 lines order
370                            Update lm87 section
371  File kernel/include/sensors_vid.h: Support VRM 10.0
372  Library: Support 2.6 adm1025
373           Preliminary support for 2.6 lm87
374           Support 2.6 adm9240
375           Allow an alternative sysfs file name for chip features (2.6)
376           Fix lm83 critical limits (2.6)
377           Add lm93 support
378           Prevent some procfs errors from being silently ignored
379  Makefiles: Implement user_uninstall (Rudolf Marek)
380             Spoof LOGNAME and HOSTNAME when making html man pages
381  Module adm1025: Refine detection
382                  Update limit registers again (revert of 2.8.1)
383                  Init high limits if they read 0
384                  Fix conversions
385  Module lm75: Refine detection
386  Module lm78: Fix init
387  Module lm83: Default to kind lm83 if forced.
388               Fix temperature macros.
389  Module lm90: Add LM86, MAX6657 and MAX6658 support
390  Module lm93: New
391  Module mtp008: Fix the setting of limits on temp2
392  Module pca9540: Refine detection
393  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
394                  Support VID
395                  Fix fan_div file when fan count is less than 3
396                  Additional init and debug
397  Module smsc47m1: Fix pwm_enable being inverted
398  Module w83627hf: Add alternate VCORE/in0 calculation method
399                   Remove reset of chip by driver on initialization
400  Module w83781d: Fix default VRM for w83791d
401  Module w83l785ts: Implement read error handling (backport from 2.6)
402  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
403                    Wait for user input to continue (as opposed to 5 sec
404                    delay), can be skipped with -y
405                    Various cleanups and code refactoring
406                    Update manual pages
407  Program fancontrol.init: New (Dean Takemori)
408  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
409  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
410                           (Giuseppe Della Bianca)
411  Program mkdev.sh: Detect devfs and refuse to run
412                    Use mknod's mode instead of chmod
413  Program mkpatch: Include xeontemp and pc87360
414  Program sensors: Rework adm1025 support
415                   Display pc87365/pc87366 VID
416                   Improve smsc47m1 support
417                   Hide 2.6 adm1027 alarm_mask being missing
418                   Print VRM version for all supported chips
419  Program sensors-detect: Support LM93, LM77, LM63
420                          Support PC8739x Super-I/O family (no sensors)
421                          Fix PCA9540 support
422                          Refine ADM1025/ADM1025A detection
423                          Refine LM75 detection
424                          Ignore missing /proc/modules (Andras Bali)
425                          Script-wide Perl cleanups
426                          Support udev
427                          Support W83792D, LM96000
428
429
4302.8.7 (20040611)
431  File README.thinkpad: Update 24RF08 status
432  File doc/fan-divisors: More info on accuracy
433  File doc/lm_sensors-FAQ.texi: Update 4.27
434  File doc/chips/adm1031: New
435  File doc/chips/max1619: New
436  File doc/chips/pc87360-fan: Renamed to pc87360
437  File doc/chips/pc87360: Big update
438  File doc/chips/w83781d: Update AS99127F documentation
439  File etc/sensors.conf.eg: Add comments about BP6 voltages
440                            Add comment on Asus A7V8X-X VCore
441                            Misc fixes to lm80 section
442                            Update via686a section
443                            New lm99 section
444                            Add section for LM85-like chips
445                            Preliminary pc87366 section
446                            Add comment on GL520SM application modes
447                            Document beep_enable (Aurelien Jarno)
448                            Preliminary max1619 section
449                            Preliminary adm1030 and adm1031 sections
450  Library: Fix 2.6 VRM
451           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
452           Fully support the PC87360 family
453           Support the lm99
454           Add version and date strings
455           Support 2.6 max1619
456  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
457  Man page i2cdetect.8: document new command line flags
458  Man page i2cdump.8: More details on how i2cdump can write to a chip
459  Modules (all chip drivers): Rework memory allocation scheme.
460  Module adm1031: New (Alexandre d'Alton)
461  Module bmcsensors: Fix oops by creating thread for initialization
462  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
463  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
464          asb100.c, lm92.c: Use swab16
465  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
466  Module gl520sm: Less agressive initialization process
467                  Fix temp1 limits being unsettable in application
468                  Ensure that temp2 and in4 are not used at the same time
469  Module i2c-i801: Support 6300ESB and ICH6
470  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
471  Module i2c-sis645: Add support for SiS655
472  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
473  Module lm90: Support LM99 and LM89
474  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
475               Get rid of useless i2c_probe call
476  Module max1619: New (Alexey Fisher)
477  Module p4b_smbus: Add support for mobile versions of the 82801
478                    (Axel Thimm)
479  Module pc87360-fan: Renamed to pc87360
480  Module pc87360: Also support PC87365 and PC87366
481                  Add write support
482                  Correctly set the chip name depending on the type
483                  Add voltage and temperature support
484                  Fix fan speed computation
485                  Retrieve fans configuration from Super-I/O space
486                  Export pwm_enable (read-only)
487                  Honor pwm invert bits
488                  Clear fan alarms after we read them
489                  Do not read fan data when monitoring is disabled
490                  Do not include SENSORS_INSMOD stuff
491                  New module parameter: init
492                  Fan clock dividers change automatically
493                  Add thermistor dupport
494  Module smsc47m1: Lock on reads and writes
495                   Various PWM fixes
496  Module thmc50: Fix address range
497  Module via686a: Fix voltage roundings
498                  Simplify temperature conversions
499  Module w83781d: Drop PWM support for as99127f
500                  Invert AS99127F beep bits in driver rather than user-space
501  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
502  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
503  Program fancontrol.pl: New
504  Program i2cdetect: Adapt probing method to address
505                     Add -q and -r flags to force probing methods
506                     Allow probing range selection
507  Program isadump: Major improvements
508  Program isaset: New
509  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
510                   module
511                   Include i2c-nforce2
512  Program sensord: New --rrd-no-average parameter
513                   Syncronize time slots with rrd
514                   Fix W83781D temp3 alarm (Aurelien Jarno)
515                   Add ASB100 support (Andrew May)
516  Program sensors: Fully support the PC87360 family
517                   Fix lm80 temperature alarms
518                   Support the lm99
519                   Do not invert AS99127F beep bits anymore
520                   Fix W83781D temp3 alarm (Aurelien Jarno)
521                   Print library version string
522  Program sensors-detect: Rework Super I/O detection
523                          Support SiS655/SiS96x
524                          Support ADT7461 and ADT7467
525                          Better support for ADM1027, ADT7460 and ADT7463
526                          Explicitly support ADM1028
527                          Scan all logical devices of PC87365 and PC87366
528                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
529                          Detect eeproms with software write protect (not
530                          enabled by default)
531                          Support ALi 1563 (2.6 only)
532                          Drop LTC1710 support
533                          Use byte reads for probing on ranges 0x30-0x37 and
534                          0x50-0x5F
535                          Improve LM89 and LM99 support
536                          Support GeForce FX 5900 video cards
537                          Fix devfs misdetection (Aurelien Jarno)
538                          Detect 6300ESB, ICH6
539                          Fix double detection of ISA chips
540                          Support MAX1619
541                          Support PC87373 Super-I/O
542                          Fix unknown adapters appearing multiple times
543                          Refine MAX6650/MAX6651 detection
544
545
5462.8.6 (20040405)
547  File README.thinkpad: Update status
548  File doc/chips/pca9540: New
549  File doc/chips/pc87360-fan: New
550  File etc/sensors.conf.eg: Update pcf8591 default configuration
551  Library: Switch to new sysfs naming standard
552           Fix gcc 3.3 warnings (Philipp Thomas)
553           Support 2.6 ds1621 and pcf8591
554           Change pcf8591 magnitudes
555           Support pc87360-fan
556  Makefile: Install shared library 755
557  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
558  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
559  Modules ds1621, pcf8591: Check for capabilities before using them
560                           (Aurelien Jarno)
561  Modules pcf8574, pcf8591: Cleanups
562  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
563  Module adm1021: Better detection and initialization
564  Module pca9540: New driver for the Philips PCA9540
565  Module pc87360-fan: New driver for the National Semiconductor PC87360,
566                      PC87363 and PC87364 Super I/O chips
567  Module smsc47m1: Support the LPC47B27x
568  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
569  Program i2cdetect: Skip special addresses by default
570  Program sensord: Prevent null pointer dereference (Tim Toohey)
571  Program sensors: Print the degree symbol in the terminal's current locale
572                   (Aurelien Jarno)
573                   Update pcf8591 print to support 2.6 driver
574                   Support pc87360-fan
575  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
576                          Improved SiS chips support
577                          Add a white list of IBM systems
578                          Drop support of undetectable adapters
579                          Fix smart battery detection
580                          Add smart battery charger and manager detection
581                          Rework adm1021 and clones detection
582                          The PC87360, PC87363 and PC87364 Super I/O chips
583                          now have a (preliminary) driver
584                          Rework Super I/O detection
585                          Better support of devfs
586  Program sensors-detect-stat.pl: New
587
588
5892.8.5 (20040305)
590  File doc/chips/SUMMARY: Update
591  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
592  Makefiles hotplug and rrd: Remove -o and -g arguments to install
593  Module bmcsensors: Increase max SDRs to 100
594  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
595  Module i2c-amd756: Don't register driver to avoid driver conflicts.
596                     (Daniel Rune Jensen)
597  Module it87: Better temperature sensor types handling (Takeru Komoriya)
598               Fix reset=1 (Takeru Komoriya)
599  Module lm80: Code cleanups
600  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
601  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
602  Module w83627hf: Add w83637hf support
603                   Fix exported name
604                   Fix PWM in w83627thf
605                   Preserve other bits when forcing temp2/3 to comparator mode
606  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
607                  Remove asb100 support
608  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
609          Define driver ID if i2c-id.h doesn't have it yet.
610  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
611          Backport oops fix from Linux 2.6.
612  Modules (all chips): Get rid of useless headers
613  Program decode-edid.pl: Add sysfs support
614  Program sensors: Add w83637hf support
615                   Add support for Shuttle Ethernet EEPROMs
616                   Drop 2.6 subclient detection
617  Program sensors-detect: Add heuristics to the LM80 detection function
618                          Add support for W83L785R, improve W83L784R/AR
619                          Add GeForce FX 5600 as supported by rivatv
620                          More Super IO chips, better handling
621  Library: Update to match renames in fscher
622           Reverse temporary changes to w83l785ts mappings
623           Fix vt1211 and vt8231 uch_config not being writable
624           Add 2.6 lm80 support
625           Add w83637hf support
626           Remove in6 and temp1 from vt1211 and vt8231
627           Add support for Shuttle Ethernet EEPROMs
628           Remove unused as99127f features
629
630
6312.8.4 (20040207)
632  File doc/lm_sensors-FAQ.texi: Update 4.20.
633  File doc/chips/it87: Change hyst to low
634  File doc/chips/w83l785ts: New
635  File etc/sensors.conf.eg: Change it87 hyst to low
636                            Fix w83697hf supposed to have temp3
637                            Limits initialization for adm1025/ne1619
638                            Handle fscher voltage conversions
639                            Add Tyan Trinity S2495 KT400 setup (Eric
640                              Schumann)
641                            Fix fscher fan labels (Reinhard Nissl)
642  Library: Better 2.6 eeprom support
643           Change it87 hyst to low
644           Add 2.6 gl518sm, fscher support
645           Fix 2.6 negative voltages handling
646           Temporary fix to w83l785ts mappings
647  Module adm1025: Separate prefix for NE1619
648  Module adm1026: Remove use of temporary ID
649                  Define addresses as a range
650  Module bmcsensors: Fix reservations
651  Module fscher: Externalize voltage conversions
652  Module eeprom: Remove memtype
653  Module i2c-piix4: Fix resource release error
654                    Various cleanups
655  Program decode-vaio.pl: Add sysfs support
656  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
657                   Drop linux 2.2 support
658                   Add w83627hf
659  Program sensors: Do not show algorithm by default
660                   Cleanup temperature unit display code
661                   Cleanup label spacing code
662                   Fix output to UTF-8 terms (Marcel Sebek)
663                   Simplify gl518sm print
664                   Do not ignore errors in FSC chips prints
665                   Fix w83l785ts print
666                   Cleanup FSC chips prints
667  Program sensors-detect: Fix PATH issues
668                          Correctly point to the fscher driver
669
670
6712.8.3 (20040115)
672  File lm_sensors.spec: Update
673  Library: Add 2.6 eeprom, lm90 support
674           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
675  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
676  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
677  Module i2c-amd756: Fix byte writes
678  Module i2c-tsunami: Cleanups (Daniel Nilsson)
679  Module it87: Fix sg_tlx writes; fix sensor type reporting;
680               add 8712 Super I/O detection;
681               remove initialization of temp_type and fan_ctl;
682               remove init and temp_type module parameters
683  Module lm90: Handle hysteresis differently
684  Module smartbatt: Fix detection, magnitudes, temp
685  Module w83781d: Fix negative voltages
686  Module w83l785ts: New
687  Program eeprog: Make 8 bit mode the default
688  Program fancontrol: Improvements, fixes, support 2.6 kernels
689  Program mkpatch: Add lm75.h
690  Program pwmconfig: Improvements, fixes, support 2.6 kernels
691  Program sensors: Add ASB100 support
692  Program sensors-detect: Add 8712 Super I/O detection;
693                          add W83L785TS detection
694
695
6962.8.2 (20031211)
697  IMPORTANT: Limit initialization removed from all chip drivers!
698             If you didn't run 'sensors -s' in the past you may need to now!
699  File sensors.conf.eg: Change lm75 scaling back to 1;
700                        Add example for asb100
701  Library: Fix bmcsensors scaling, increase number of sensors;
702           Add w83627thf support; Advance version to 3.0.0;
703           Add hermes, ADM1032, ASB100 support;
704           Add it87 sensor type support;
705           Add sysfs support for kernel 2.6;
706           Fix memory leaks
707  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
708             Fail if no kernel .config file exists;
709             Don't build module dependencies for user and user_install
710  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
711          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
712          smsc47m1, thmc50, via686a, w83627hf, w83781d:
713          Remove initialization of limits by driver.
714  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
715  Modules (chip): Init cleanups
716  Module asb100: New
717  Module bmcsensors: Fix voltage scaling, voltage and fan limits
718  Modules ddcmon, eeprom: Add failure printks
719  Module fscher: New (Fujitsu-Siemens Hermes driver)
720  Module i2c-amd756: Fix AMD8111 support
721  Module i2c-amd8111: Fix byte writes
722  Module i2c-nforce2: Fix byte writes
723  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
724  Module i2c-sis630: Sync with 2.6.0-X driver version
725  Module i2c-viapro: Add support for Via 8237
726  Module it87: Add pwm and "smart guardian" support;
727               add it87 sensor type support
728  Module lm75: Fix negative voltages
729  Module lm90: Add ADM1032 support
730  Module w83781d: Fix 791d and 627hf detection
731  Module w83627hf: Add VID support
732  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
733  Program eeprog: New
734  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
735                                       support sysfs for i2c bus search
736  Program i2cdetect: Add -l option to list busses
737  Program i2cdump: Add 'c' mode for consective address reads
738  Program mkpatch: Cleanups
739  Program pwmconfig: Handle multiple fans controlled by a single pwm
740  Program sensord: Remove ddcmon support
741  Program sensors: Add ADM1032 support; add messages for sysfs
742  Program sensors-detect: Prefer Super I/O drivers;
743                          Fix W83627HF and W83791D detection; detect CSB6;
744                          Detect ADM1029, ADM1030, ADM1031;
745                          Detect W83637HF, W83697UF;
746                          Add it87 sensor type support; add sysfs support
747                          Reduce lm80 misdetects; remove PCFxxxx "detection"
748                          Detect VT8237 (KT600)
749                          Use VPD instead of DMI+ACPI for Thinkpad detection
750                          Suggest new asb100 driver instead of w83781d
751
752
7532.8.1 (20031005)
754  NOTE: Requires i2c-2.8.1 or newer!
755  File sensors.conf.eg: Improved adm1025 section
756                        Default temp labels for as99127f
757                        Improved lm83 section
758                        Better support for Asus A7V8X-X
759  File doc/chips/SUMMARY: Add SMSC manufacturer ID
760  File doc/chips/adm1025: Add decent documentation (almost new)
761  File doc/chips/lm83: Known motherboards list update, misc updates
762  Library: Change adm1025 names (hyst/over become low/high)
763           Swap adm1025 temp1 and temp2 to match the driver's order
764           Advance version to 2.0.1
765           Update lm83 support
766           Add support for lm90, xeontemp, max6650
767           Add separate messages for read and write errors
768           Add missing message for parse error
769  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
770  Modules (various): Fix includes for compilation on Alpha
771                     Use the new i2c_delay function instead of the various
772                     do_pause functions
773  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
774  Module i2c-nforce2: Cleanups
775  Module i2c-i810: Use readl/writel for portable access to PCI memory
776  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
777  Module i2c-savage4: Use readl/writel for portable access to PCI memory
778  Module i2c-sis630: Fix detection
779                     Add block data read/write support
780  Module i2c-sis645: Detection method change/bugfix
781  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
782  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
783  Module adm1025: Major driver update
784                  Add support for Philips NE1619
785                  Simplify the driver a lot (unified voltages, unified
786                  temperatures and much more)
787                  Fix default voltage limits
788                  Change default temperature limits
789                  Swap remote and local temperatures to match the internal
790                  registers order (make the code unification possible)
791                  Export remote diode fault through alarms
792  Module ddcmon: Major update
793                 Add half a dozen new features
794                 Add checksum parameter (same as for the eeprom module)
795                 Fix monitor limits
796  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
797  Module lm78: Fix a fan_div/fan_min bug
798  Module lm83: Add t_crit and alarms support
799  Module lm90: New
800  Module max6650: New
801  Module saa1064: New
802  Module smsc47m1: Add support for 47M142
803  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
804                   enhance w83627thf support
805  Module w83781d: Enhance chip detection; clean up error returns;
806                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
807  Module xeontemp: New
808  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
809                           Mark Rambus as unsupported
810  Program decode-edid.pl: New
811                          Interfaces between our eeprom module and
812                          parse-edid from the read-edid project
813  Program p4b_smbus: Fix SMP compilation
814  Program sensord: Add support for IT87 (Mike Black)
815                   Change ADM1025 support to match the changes made to
816                   the library
817  Program sensors: Rewrite and enhance EEPROM support
818                   Change LM83 and ADM1025 support to match the changes
819                   made to the library
820                   Add DRDRAM support to print_eeprom
821                   Exit(1) on /proc write failure (Malte Starostik)
822                   Add LM90, MAX6650 support
823  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
824                          Add support for LM82, LM86, LM89
825                          Improved W83781D family detection
826                          Add support for AS19927F rev.2, ASB100 Bach
827                          Add support for Asus Mozart-2 (3 types)
828                          Add support for NE1619
829                          Add support for FSC Hermes
830                          Make sure /sbin is in the user's path
831                          Fix EEPROM detection
832                          Automatic module.conf and /dev/i2c* detection
833                          Improve LM82 and LM83 detection
834                          Handle "to-be-written" cleanly
835                          Add detection for 47M14x Super I/O
836                          Handle the one-address-many-chips-same-driver
837                          case
838
839
8402.8.0 (20030714)
841  NOTE: Requires i2c-2.8.0 or newer!!!
842  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
843                  2.4.13 or later required for mkpatch.
844  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
845                  i2c package
846  File doc/chips/fscscy: Add watchdog documentation
847  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
848  File sensors.h: Now automatically generated
849  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
850           add adm1026, lm83, lm85, w83791d support;
851           Advance version to 2.0.0
852  Makefiles: Generate warnings if new library won't be found by ld.so;
853             Modules now install in kernel/drivers/i2c/[busses,chips];
854             Ensure that headers in /usr/local/include are used first;
855             Don't use /usr/include headers for modules;
856             Handle multiple UTS_RELEASE definitions in linux/version.h;
857             Automatically generate kernel/include/sensors.h;
858             Remove old gzipped modules; remove old misc directory if empty;
859             Remove pre-2.4 installation method;
860             -Wall now the default;
861             Add new targets user, user_install, and help;
862             Run depmod after module installation
863  Modules (all): Cleanups including
864                - Add #include <i2c-proc.h>
865                - C99 initializers
866                - Remove #ifdef MODULE
867                - Remove #ifndef THIS_MODULE
868                - Remove #ifndef MODULE_LICENSE
869                - Remove other 2.1/2.2 #ifdefs
870                - Remove #include "sensors.h", copy SYSCTL defs to module
871                - Remove excess #includes
872                - Remove argument in i2c_register_entry()
873                - Remove dummy xxx_command() definition
874                - Remove EXPORT_NO_SYMBOLS
875                - Remove init_MUTEX #define
876                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
877                  no longer adjust their own refcounts
878                - Use module_init() and module_exit()
879                - Update to new i2c_driver struct definition
880  Modules (bus PCI): Convert to PCI-module-style initialization
881  Modules (several): Add support for AMD Opteron VRM (VID) encoding
882  Module adm1021: Set alarm on failed reads and report old value;
883                  merge changes from kernel 2.5.54
884  Module adm1026: New
885  Module bmcsensors: Fix compile when DEBUG=1
886  Modules ddcmon, eeprom: Use i2c block reads if possible;
887                          better error handling
888  Module ds1307: Add to Makefile
889  Module gl520sm: Fix temperature over/hyst writes
890  Module lm75: merge changes from kernel 2.5.54
891  Module lm83: New
892  Module lm85: New
893  Module i2c-ali1535: Check for invalid transaction
894  Module i2c-ali15x3: Check for invalid transaction
895  Module i2c-amd756: merge changes from kernel 2.5.54;
896                     check for invalid transaction
897  Module i2c-amd8111: merge changes from kernel 2.5.54
898  Module i2c-i801: Add support for 82801EB (ICH5)
899  Module i2c-i810: Fix for some chips
900  Module i2c-nforce2: New
901  Module i2c-piix4: Check for invalid transaction
902  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
903  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
904        north bridges; SiS962 and SiS963 south bridges
905  Module i2c-viapro: Check for invalid transaction
906  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
907          pwm and pwm enable support; update docs
908  Module smbus-arp: Check adapter for HW or SW PEC support;
909                    add reset option
910  Module w83781d: Add support for w83791d
911  Module w83627hf: New
912  Program decode-dimms.pl: Recognize DDR and Rambus
913  Program eeprom: Fix writes for small eeproms
914  Program eeprom, eepromer: Use local i2c-dev.h for build
915  Program fancontrol: New
916  Program lm_sensors.init: Call sensors -s in start()
917  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
918                   Add adm1026,lm85 support;
919                   Remove sensors.c file; add sensors_compat.h;
920                   Remove patches to i2c-core.c and drivers/char/mem.c;
921                   Now works only for kernels 2.4.13 or later
922  Program p4b_smbus: Fix 'make install';
923                     Install in same place as other modules;
924                     Clear correct bits in config word
925  Program pwmconfig: New
926  Program sensors: add adm1026, lm85, w83791d support
927  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
928                          w83627hf, w83627thf, w83697hf);
929                          Add support for SiS651, SiS961, SiS745, SiS746;
930                          Support dmidecode 2.0 and later;
931                          Fix "C" format error;
932                          Add support for adm1026, 82801EB (ICH5), W83791D;
933                          Add support for w83l785ts, nForce2;
934                          Fix UTF-8 incompatibility;
935                          Better support for lm75;
936                          Add support for lm83
937
9382.7.0 (20021208)
939  NOTE: Requires i2c-2.7.0 or newer.
940  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
941  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
942  File doc/busses/i2c-sis645: Add license
943  File doc/chips/lm92: Add license, features
944  File doc/chips/maxilife: Add license, parameters, features
945  File doc/chips/smartbatt: Complete rewrite
946  File doc/chips/vt8231: Add license, parameters
947  File sensors.conf.eg: Add section for lm75; complete the lm78 section
948  Library: Add support for MC1066; add multiple VRM version support for lm87;
949           enhance adm1023 support; initial support for Sony Vaio eeprom;
950           add support for bmcsensors; add hacks for additional dummy drivers
951  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
952            add flags for x86_64 compiles
953  Module adm1021: Add support for MC1066
954  Module bmcsensors: New
955  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
956                   kernel 2.5.43; fix 2.2 kernel compiles
957  Module gl518sm: Iterate allowed only for rev 0x00
958  Module i2c-amd756: Configure base address for nForce support;
959                     check for uninitialized base address;
960                     add support for amd8111 (SMBus 1.0)
961  Module i2c-amd8111: New (SMBus 2.0)
962  Module i2c-ipmb: New
963  Module i2c-ipmi: New
964  Module i2c-keywest: Sync with kernel 2.4.20
965  Module i2c-sis630: Add support for SiS730
966  Module i2c-sis645: Improve support for SiS645/961;
967                     add support for SiS645DX/961 and SiS735;
968                     fix 2.2 kernel compiles
969  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
970  Module lm87: Add multiple VRM version support
971  Module vt1211: Fix inx limits and alarms; fix in0
972  Module vt8231: Fix inx limits and alarms; fix in0
973  Module w83781d: Fix in0/in1 initialization
974  Module smartbatt: New
975  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
976  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
977                           stop decoding on checksum error
978  Program dmidecode: Fix read bug; upgrade to version 1.8
979  Program doc-insmod: Complete rewrite; fix author output
980  Program doc-features: Complete rewrite; handle missing sysctl entries;
981                        handle unknown prefix with suggestion
982  Program lm_sensors.init: Remove spaces bug; add green/red output
983  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
984  Program rrd: Add sanity limits to newly-created RRD.
985  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
986  Program sensors: Add support for MC1066, Rambus Rimms;
987                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
988                   initial support for Sony Vaio eeprom
989  Program sensors-detect: Add support for MC1066, smart battery, 8235,
990                          IPMI, AMD8111; add help if no sensors found;
991                          add ACPI method for IBM system detection;
992                          work with old Perl versions again;
993                          initial support for Sony Vaio eeprom
994
9952.6.5 (20020915)
996  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
997  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
998  Library: Fix fan3_div writes for w8378* and it87; add vt8231
999  Module dmi_scan: new
1000  Module ds1621: Fix enable/disable
1001  Module eeprom: Do not corrupt 24RF08's when checksum=1
1002  Module i2c-i801: Check for uninitialized base address;
1003                   enable if not enabled
1004  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1005  Module i2c-sis630: new
1006  Module i2c-sis645: new
1007  Module lm92: Fix in-kernel initialization
1008  Module via686a: Remove VT8231 support
1009  Module vt8231: new
1010  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1011  Program dmidecode: new
1012  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1013  Program mkpatch: Add Config.in entries for, lm92,
1014                   pcf8574, pcf8591, smsc47m1, vt1211;
1015                   add dmi_scan
1016  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1017  Program lm_sensors.init: fix stop()
1018  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1019                   add support for logging loadavg in RRD;
1020                   fix down-converting raw labels for RRD;
1021                   update chip support, still behind sensors
1022  Program sensors: Add /usr/local/etc to config file path;
1023                   fix -c and -u flags; add vt8231
1024  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1025                          refuse to run on IBM systems;
1026                          fix sysconfig module numbering;
1027                          change quick write to not corrupt 24RF08's
1028
10292.6.4 (20020719)
1030  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1031  File doc/vid: New
1032  File include/sensors_vid.h: New
1033  File sensors.conf.eg: Add vt1211, smsc47m1
1034  Library: Add multiple VRM version support for adm1025, w83781d;
1035           fix 'flex scanner jammed' on some systems;
1036           add vt1211, smsc47m1, lm92;
1037           fix access mode checking
1038  Makefiles: For 2.4+ kernels, modules now install in
1039             kernel/drivers/[i2c,sensors] , not misc/ , and
1040             'make install' removes old versions in misc/ .
1041             Use $CFLAGS and $CPPFLAGS if defined.
1042  Module adm1025: Add multiple VID version support
1043  Module ds1307: new
1044  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1045                     reliability improvements
1046  Module i2c-hydra: Flush posted writes
1047  Module i2c-i801: Add support for 82801DB (ICH4)
1048  Module i2c-i810: Flush posted writes
1049  Module i2c-savage4: new
1050  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1051  Module i2c-voodoo3: Flush posted writes
1052  Module ds1307: New
1053  Module lm92: New
1054  Module smbus-arp: new
1055  Module smsc47m1: new
1056  Module via686a: Add support for VT8231 sensors
1057  Module vt1211: new
1058  Module w83781d: Add multiple VID version support; fix temp alarms
1059  Program eeprom: new
1060  Program i2cdump: Add smbus block command specification, add PEC support
1061  Program lm_sensors.init: new
1062  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1063                   pcf8574, pcf8591, smsc47m1, vt1211
1064  Program p4b_smbus: Add support for ICH4
1065  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1066  Program sensord.init: Renamed, was prog/init/sensors
1067  Program sensord: Major update, now requires rrd source;
1068                   not compiled by default
1069  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1070                   (don't display algo. and adap.) option;
1071                   add vt1211, smsc47m1, lm92
1072  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1073                          add 82801DB, LM85; fix perl warnings;
1074                          generate /etc/sysconfig/lm_sensors for
1075                          lm_sensors.init script
1076
10772.6.3 (20020322)
1078  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1079  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1080  File doc/chips/it87: add more temp_type help
1081  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1082                        add adm1021 section; add lm87 AIN[1,2] template;
1083                        swap negative voltage limits for 782d,783s,627hf,
1084                        697hf,it87; add more it87 help; swap neg. voltage
1085                        limits for lm78(-j), lm79, w83781d, as99127f
1086  Library: Add PCF8591, W83697HF, ADM1023 support;
1087           fix w83* fan_min computes;
1088           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1089  Module adm1024: Add MODULE_LICENSE("GPL")
1090  Module bt869: Add s-video out and DVD resolution support
1091  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1092  Module fscscy: implement min/max for voltages and fans
1093  Module i2c-amd756: Add support for AMD768
1094  Module i2c-i810: Add support for 810E
1095  Module i2c-keywest: Big update, sync with kernel 2.4.18
1096  Module i2c-piix4: Check for uninitialized base address
1097  Module i2c-sis5595: Blacklist 645, 735
1098  Module i2c-viapro: Check for uninitialized base address
1099  Module gl518sm: Standardize /proc entries in0-3
1100  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1101               fan -> fan1; fix temp2 limit writes
1102  Module pcf8574: Add support for PCF8574A; /proc interface changed
1103  Module pcf8591: new
1104  Module sis5595: Blacklist 645, 735
1105  Module w83781d: Add W83697HF support; allow force_subclients parameter
1106                  for Tyan 2460
1107  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1108  Program decode-vaio.pl: new
1109  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1110                   add text output
1111  Program init/sensors: New SysV init script
1112  Program mkpatch.pl: Add support for fscscy, add more help entries
1113  Program p4b_smbus: new
1114  Program rrd: Install summ_week.cgi
1115  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1116                   clean up chassis intrusion prints
1117  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1118                          fix Via686a and it87 detection;
1119                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1120                          fix uninitialized values; it87 beats lm78
1121
11222.6.2 (20011118)
1123  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1124  Chip Modules (all): malloc.h -> slab.h
1125  Modules (all): Add MODULE_LICENSE("GPL")
1126  File doc/FAQ: More updates and additions
1127  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1128  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1129           update it87 alarm ID's.
1130  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1131  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1132  Module i2c-amd756: Improve busy handling/printk's
1133  Module i2c-i801: Add 82801CA/CAM support
1134  Module i2c-keywest: Sync with PPC people, it works now
1135  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1136  Module i2c-viapro: Add Via VT8233 support
1137  Module it87: Merge alarm_* /proc entries to alarms
1138  Module sis5595: Fix support for rev B0
1139  Module via686a: Make limit initializations reliable
1140  Module w83781d: Allow init=0 parameter to bypass initialization
1141  Program isadump: Add flat address space (PCI) support
1142  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1143                      fscpos, it87, maxilife, mtp008
1144  Program sensors: Fix w83781d temp precision
1145  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1146                          Fujitsu Poseidon and Scylla,
1147                          Intel 82443MX and 82801CA/CAM detection,
1148                          add ITE 8172G detection (driver in kernel 2.4.10)
1149
11502.6.1 (20010830)
1151  File BUGS: Updated
1152  File doc/FAQ: More updates and additions
1153  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1154  File sensors.conf.eg: Fix/enhance it87 section
1155  Library: ds1621 and it87 updates
1156  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1157  Module i2c-amd756: Add AMD 766 support
1158  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1159  Module i2c-piix4: Add Serverworks CSB5 support
1160  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1161  Module adm1025: Fixed temp2 min/max writes
1162  Module ds1621: Add 12-bit precision mode
1163  Module it87: Enable all alarms, add in8 support, add sensor type selection
1164  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1165                  remove support for module
1166  Module sis5595: Recognize unsupported chips and refuse to load
1167  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1168  Program eepromer: new
1169  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1170                      of sensors.c as a module in kernel
1171  Program sensors: it87 updates; adjust temp. precision for some chips
1172  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1173                          recognize unsupported SiS chips;
1174                          recognize AMD 766 and Serverworks CSB5.
1175
11762.6.0 (20010612)
1177  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1178        If your make fails because it can't find <linux/i2c-proc.h>, you
1179        forgot this step!!!
1180  File doc/FAQ: Many, many updates and additions
1181  File doc/busses/i2c-sis5595: new
1182  File doc/busses/i2c-tsunami: new
1183  File doc/chips/it87: new
1184  File doc/chips/via686a: Claim support for 686b.
1185  File README.thinkpad: new
1186  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1187                        Add lm87, adm9240, ds1780, lm81 templates;
1188                        Enhance help comments in file;
1189                        Add Tyan S2510 dual-MTP008 example;
1190                        Make separate sis5595 section.
1191  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1192  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1193  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1194           Add support for maxilife-nba and amd1024;
1195           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1196  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1197  Chip Modules (all): Change from sensors_* to i2c_* globals
1198                      for new i2c-proc.[ch]
1199  Makefiles: enhance to support Alpha architecture
1200  Module adm1021: Fix lm84 and gl523sm support
1201  Module adm1024: new
1202  Module i2c-i801: Chip detection cleanup
1203  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1204  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1205  Module i2c-tsunami: New
1206  Module i2c-via: Ensure i2c bus is tristated correctly.
1207  Module it87: new driver for IT8705, IT8712, Sis950 chips
1208  Module lm78: Recognize chipid=0x20
1209  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1210  Module mtp008: Fix temp initializations;
1211                 Save BIOS pin configuration of temps and fans;
1212                 Fix sensor type reads/writes and fan min writes;
1213                 Fix spurious invalid sensor type messages
1214  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1215                  used for patched kernel now.
1216                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1217  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1218                  Allow force_addr=0xaddr
1219  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1220  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1221                  reading changes; Add messages for subclient
1222                  registration failure
1223  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1224  Program i2cset: new
1225  Program isadump: fix for Alpha arch. compiles
1226  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1227                      Remove ltc1710; Fix i2c_sis5595 typo;
1228                      Support kernel 2.4.5 makefile change;
1229                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1230  Program sens_update_rrd: new
1231  Program sensord: Add -d (debug) and -p (pid-file) options
1232  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1233                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1234                   Change mtp008 temps from max/min to limit/hyst;
1235                   Add maxilife-nba, adm1024, it87 support.
1236  Program sensors-detect: Recognize lm78 with chipid=0x20;
1237                          Recognize SMSC Victory66 South Bridge;
1238                          Add devfs /dev/i2c/x support;
1239                          Add adm1024, it87xx support; Add thinkpad warning.
1240  Program tellerstats: new
1241
12422.5.5 (20010115)
1243  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1244        you have kernel 2.4.0-prerelease or greater.
1245  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1246  File doc/developers/proc: new
1247  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1248  Library: Add ds1621, mtp008 support
1249  Module adm1021: Add support for adm1021a / adm1023
1250  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1251  Module adm1025: Add support for remote temp; rename /proc entries to
1252                  in[0-5] and temp[1-2]; fix negative temp readings
1253  Module adm9240: Rename /proc entries to in[0-5]
1254  Module ddcmon: allow force and force_ddcmon parameters
1255  Module ds1621: new
1256  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1257  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1258  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1259  Module lm87: cleanup, update voltage calculations
1260  Module mtp008: new
1261  Module pcf8574: change update time to 5 seconds
1262  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1263  Module w83781d: fix beep setting via /proc
1264  Programs editticket, readticket: new
1265  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1266  Program mkpatch.pl: more fixes; now adds many more modules
1267  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1268                   add adm1025 temp2; report temp limits correctly as
1269                   min/max or limit/hysteresis; print message if no
1270                   sensors are found. Removed false errors from lm87 reads.
1271  Program sensors-detect: Add ds1621, mtp008 detection;
1272                          add ServerWorks detection
1273
12742.5.4 (20001012)
1275  Module i2c-viapro: Add support for Via 596B (0x3051)
1276  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1277  Program mkpatch.pl: fixed infinite loop
1278  Program sensors-detect: Detect Via 596B (0x3051)
1279
12802.5.3 (20001008)
1281  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1282  File useful_addresses.html: update
1283  Library: Add lm87 support
1284  Module pcf8574: new
1285  Module i2c-ali1535: new
1286  Module i2c-ali15x3: removed force #ifdef.
1287  Module i2c-i801: support Intel 82801BA (815E chipset)
1288  Module i2c-i801: add i2c block write support, fix smbus block bugs
1289                   (requires i2c 2.5.3 package)
1290  Module i2c-i810: support Intel 82815
1291  Module lm87: new
1292  Module sensors: Fix for kernel 2.4.0-test8
1293                  (remove copy_to_user_ret and put_user_ret)
1294  Module w83781d: limit fan divisors to 8 max. for as99127f
1295  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1296  Program i2cdump: Add smbus block read support
1297  Programs i2cdetect, i2cdump: Improve error reporting
1298  Program sensors: new switch -u (--unknown)
1299  Program sensors-detect: detect Intel 82801BA (815E chipset)
1300  Program sensors-detect: detect Intel 82815
1301  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1302  Program sensors-detect: detect National LM87
1303  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1304  Program sensors-detect: Improve error reporting
1305
13062.5.2 (20000709)
1307  File sensors.conf.eg: Fix lm80 in8 calculation
1308  Module w83781d: W83783S no longer crashes on unloading
1309  Program sensors-detect: more robustness in case of unknown i2c adapters
1310  Program sensors-detect, libsensors: fix eeprom size reporting
1311  Program sensord: more flexibility, support for alarm scanning etc.
1312  Program sensors: support for ignore setting on sensor alarms.
1313  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1314
13152.5.1 (20000618)
1316  Library: Add adm1025 support
1317  Module adm1025: new
1318  Module ddcmon: Fixed bus scan which could hang SMBus
1319  Module i2c-keywest: new
1320  Module maxilife: Add support for Maxilife '99 (NBA)
1321  Module via686a: Enable sensors if not enabled by BIOS
1322  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1323  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1324  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1325  Module w83781d: Fis as99127f fan speed (was 66% too high)
1326  Module w83781d: Improve beep input checking
1327  Program i2cdump: Add Winbond-style bank selection
1328  Program isadump: Add Winbond-style bank selection
1329  Program sensors: Add adm1025 support.
1330  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1331  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1332  File sensors.conf.eg: Add Maxilife '99 entries
1333  File sensors.conf.eg: Remove some as99127f entries.
1334    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1335          won't reinstall it) or else 'sensors -s' will fail.
1336
13372.5.0 (20000312)
1338  Dropped all kernel 2.0 and 2.1 compatibility
1339  Module i2c-i810: new
1340  Module ddcmon: new
1341  Module via686a: new
1342  Module i2c-amd756: fixed region request
1343  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1344  Module w83781d: Don't change pin settings at initialization;
1345                  also fix chip detection.
1346  Library: Support for ddcmon and via686a
1347  Program sensors-detect: Support for ddcmon and via686a
1348  Program sensors: Support for eeprom, ddcmon and via686a
1349
13502.4.5 (20000116)
1351  Introduced DESTDIR installation prefix
1352  Module lm80: fixes, temperature now read and set correctly
1353  Module i2c-voodoo3: driver enhancements
1354  Module w83781d: fixes, AS99127 works much better now
1355  Library: New ignore keyword in config file
1356  Programs: Support for new ignore keyword
1357  Program sensors-detect: Support for MGA detections
1358
13592.4.4 (19991201)
1360  Addition of the alpha release of AMD 756 SMBus host support.
1361  Many fixes and updates to the gl518sm driver
1362  Updates and fixes for device detection
1363
13642.4.0 (19990920)
1365  Too much to list.
1366  i2c and smbus parts are split off to a separate i2c package.
1367  New drivers and other stuff.
1368
13692.3.4 (19990616)
1370  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1371  All: Now compiles against kernel 2.0.x (again ;)
1372  Module gl518sm: some updates and refinements
1373
13742.3.3 (19990603)
1375  All: Now compiles against kernel 2.3.x (x >= 1)
1376  Module i2c-voodoo3: Timing issue fixes
1377  Module bt869: Seems to be functional and relatively well tested
1378  Many modules were modified to be more compatible with the new
1379   Mutex structure in the new experimental kernels.
1380
13812.3.2 (19990507)
1382  Module i2c-hydra: Now compiles on 2.0.x kernels
1383  Module i2c-lm75: Slightly better detection
1384  * New, but not compiled by default:
1385  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1386  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1387
13882.3.1 (19990501)
1389  All: Now compiles on PPC
1390  Module i2c-hydra: NEW
1391  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1392  Module w83781d: Removed deadlock (mutex was not initialized)
1393  Documentation: A few glitches removed
1394  Makefile: default module installation directory is now
1395            /lib/modules/current/extra/misc
1396  Program sensors-detect: PPC Hydra now detected
1397  Program sensors: Now prints complete GL518SM information
1398  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1399
14002.3.0 (19990422)
1401  All: Many, many changes and improvements
1402  All: Many small bugs and problems removed
1403  Modules: New insmod parameters
1404  Modules: Much improved chip detection
1405  Module maxilife: NEW
1406  Module adm1021: MAX1617A now also supported
1407  Module adm9240: DS1780 now also supported
1408  Module w83781d: W83782D and W83783S now also supported
1409  Program sensors-detect: NEW
1410  Library: All chips now supported
1411  Documentation: Very much improved
1412
14132.2.2 (199903??)
1414  Just some minor updates and bug fixes.
1415
14162.2.1 (19990218)
1417  All: Removed compile warnings
1418  Module i2c-dev: Small bug removed if DEBUG=1 was used
1419  Module sis5595: Now compiles for 2.0 kernels
1420  Module adm1021: Detection corrected
1421
14222.2.0 (19990216)
1423  All: Set copyrights to include 1999
1424  All: Small bugfixes
1425  I2C: Upgraded to newest archive of Simon Vogl
1426  Module i2c-dev: NEW
1427  Module i2c-ali15x3: NEW
1428  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1429     directories, and somewhat improved
1430  Module sis5595: NEW
1431  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1432  Library: Support for new chip drivers, several small bugs fixed
1433  Library manual pages: NEW
1434  Program i2cdetect: Moved to detect directory
1435  Program detect.pl: NEW
1436  Program doc-features: NEW
1437  Program sensors: Added man-page
1438  Document BUGS: Added cdrom bug and kernel i2c conflict
1439
14402.1.2 (19990116)
1441  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1442  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1443  Documentation in doc/kernel: NEW
1444
14452.1.1 (19990107)
1446  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1447                     and older
1448  Module gl518sm.o: Miscelaneous bugs and problems solved
1449  Program isadump: NEW
1450
14512.1.0 (19981230)
1452  Library: Completely NEW
1453  Program sensors: NEW
1454  Program grab_busses: NEW
1455  Program decode-dimms: More information
1456  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1457  Module w83781d.o: NEW
1458  Module lm80.o: NEW
1459  Module gl518sm.o: new procfile beep, several small updates
1460  Modules: Now use pin readings, no more scaling within the kernel (use the
1461           library instead)
1462
14632.0.2 (19981214)
1464  Module eeprom.o: NEW
1465  Program decode-dimms: NEW
1466  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1467           2.1.58
1468  Modules: Somewhat less verbose on transfers
1469  Module lm78.o now recognizes and handles lm78-j and lm79
1470
14712.0.1 (1998121?)
1472  Module gl518sm.o updates, to make it actually work
1473  Module lm75.o high/low-byte swapping write bug fixed
1474
14752.0.0 (19981209)
1476  Initial release
Note: See TracBrowser for help on using the browser.