root/lm-sensors/trunk/CHANGES @ 4119

Revision 4119, 71.6 KB (checked in by khali, 8 years ago)

sensors-detect: Exit immediately if user isn't root. It makes very little
sense to try and continue as a non-root user, as we won't be able to load
modules, nor to probe i2c busses, nor to access the ISA ports. It's way
less confusing for the user to clearly state he/she needs to be root,
and stop.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
42.10.1 (2006????)
5  File doc/busses/i2c-piix4: Update (2.6 backport)
6  File doc/developers/sysfs-interface: Update
7  File etc/sensors.conf.eg: Add an smsc47m192 section
8                            Comment out all set statements
9                            Add an it8716 section
10                            Add a w83793 section
11  Library: Fix device scan when no i2c support is present
12           Add support for W83627EHF voltage inputs and alarms
13           Add support for the smsc47m192 driver
14           Fix all memory leaks (yeah!)
15           Fix no sensors being reported as an error
16           Add support for the IT8716F and IT8718F chips
17           Add support for the W83793 chip (Yuan Mu)
18           Map the 2.6 adm1026's fan8 to fan0
19  Makefile: Don't grep autoconf.h on user-space targets
20            Fix depmod on non-running kernel version
21  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
22  Module i2c-amd756-s4882: Improve static semaphore initialization
23                           (2.6 backport)
24  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
25                   Add ICH8 support (2.6 backport)
26                   Fix block transaction poll loops (2.6 backport)
27                   Remove PCI function check (2.6 backport)
28                   Cleanups (2.6 backport)
29  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
30  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
31                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
32                    Drop the fix_hstcfg parameter (2.6 backport)
33  Module i2c-viapro: Fix compilation with kernels < 2.4.21
34  Module lm83: Add LM82 support (2.6 backport)
35  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
36                  Add specific alarm and beep defines for the W83791D
37  Module w83792d: Fix PWM range (2.6 backport)
38  Program decode-dimms.pl: Decode depending on the memory type
39                           Decode the manufacturing date to an ISO8601 date
40                           Add the memory size computation and provide brief
41                            timing characteritics for SDRAM/DDR/DDR2 memory
42                           Add memory size computation for Rambus memory
43                           Various output cleanups and fixes
44  Program i2cdetect: Add a mode to print adapter functionalities
45  Program i2cdump: Restore bank after bank switching
46                   Add new mode W (read word on even register addresses)
47  Program mkpatch: Fix typo breaking f71805f
48  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
49                   Add smsc47m192 support
50                   Add abituguru support (Hans de Goede)
51                   Fix memory leak when printing an unknown chip
52                   Add it8716 and it8718 support
53                   Make each it87 fan and fan div optional
54                   Print missing w83791d values
55                   Add w83793 support (Yuan Mu)
56  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
57                          Add ATI IXP200/300/400 SMBus detection
58                          Prevent warning on 64-bit PCI addresses
59                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
60                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
61                           F75384S/M, F75387SG/RG and F81218D detection
62                          Add Winbond W83793R/G and W83627DHG detection
63                          Handle the W83791D driver difference between kernels
64                          Add nForce4 MCP04, MCP51 and MCP55 detection
65                          Add AMD Geode devices detection
66                          Add ITE IT8716F and IT8718F detection
67                          Add NatSemi/Winbond PC87427 detection
68                          Get driver information for busy addresses from
69                           sysfs (2.6 only)
70                          Drop the ISA IT87xxF detection
71                          Check i2c adapter functionalities before probing
72                          Add Intel ICH8 SMBus detection
73                          Add AMD K8 thermal sensors detection
74                          Simplify detection of SiS5595, VIA686 and VT8231
75                          Add Analog Devices ADM1033, ADM1034, ADT7462,
76                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
77                          Check for root user at startup
78
79
802.10.0 (20060214)
81  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
82  File doc/busses/i2c-viapro: Update (2.6 backport)
83  File doc/chips/via686a: Update (2.6 backport)
84  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
85  File etc/sensors.conf.eg: Do not set vrm by default
86  File i2c-dev.h: Fix union i2c_smbus_data definition
87                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
88                  Add missing parentheses around macros
89                  Drop I2C_FUNC_SMBUS_EMUL
90                  Drop I2C_FUNC_SMBUS_*_PEC
91                  Drop I2C_SMBUS_*_PEC
92  File sensors_vid.h: Drop default VRM
93  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
94           This is intentional.  Use decode-dimms.pl if you still
95           need your memory SPD data.
96  Library: Big update to use libsysfs.  More TODO though.
97           Fix bus matching code for Linux 2.6 (Karsten Petersen)
98           Add f71805f, w83687thf support
99           Add platform drivers support
100           Fix sysctl warnings on x86_64
101           Restore vt1211 temp1
102  Makefile: Compile user-space programs with -Wundef
103  Module i2c-i801: Simplify the hardware PEC code
104                   Always set PEC mode explicitly before each transaction
105  Module i2c-i810: Documentation update, PCI IDs cleanup
106  Module i2c-keywest: Remove bus probing code (2.6 backport)
107  Module i2c-nforce2: Remove dead code (2.6 backport)
108                      Add the ID of the nForce4 MCP-04 (2.6 backport)
109  Module i2c-via: Remove dead code
110  Module i2c-viapro: Remove dead code
111                     Support I2C block read (2.6 backport)
112                     Code cleanups (2.6 backport)
113                     Improve debug register dump (2.6 backport)
114  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
115          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
116          i2c-sis645: Use pci_driver name to request I/O region; do
117                      not initialize i2c_adapter name to "unset" (2.6
118                      backport)
119  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
120                                              (2.6 backport)
121  Module adm9240: Cleanups (2.6 backport)
122  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
123  Module it87: Minor cleanups
124               Fix fan3_div setting bug (Anton V. Staaf)
125  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
126               Separate the register read function
127               Add PEC support for the ADM1032
128  Module via686a: Cleanups
129  Module w83627hf: Drop useless initialization step (2.6 backport)
130                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
131                   Fix alarms (Yuan Mu)
132                   Preserve fan min on fan div change (Yuan Mu)
133                   Properly handle W83627THF without VID (Yuan Mu)
134                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
135                   Add W83687THF support
136  Module w83781d: Drop W83697HF support (Grant Coady)
137  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
138                  Fix fan control mode (PWM/DC) reporting
139                  Fix fan div auto-adjust (Yuan Mu)
140                  Fix the subclient handling
141  Module w83l785ts: Minor cleanup (2.6 backport)
142  Module vt1211: Restore temp1
143  Modules vt1211, vt8231: Change default VRM to 9.1
144  Program decode-dimms.pl: Add lookup tables for manufacturer names
145                           Fix rounding error in PCxxxx speed computation
146                           Improve text output
147                           Improve speed under Linux 2.6
148                           Verify checksum before decoding anything
149                           Improve manufacturing location decoding
150                           Improve memory type detection
151                           Improve part number decoding
152  Program i2cdump: Drop now useless #ifdef tests
153                   Fix capability check for continuous byte mode
154  Program i2cget: New
155  Program i2cset: Add PEC support
156                  Fix argc check
157  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
158                                       Print the correct bus type if bus
159                                       functionality can be queried
160  Program isadump: Display the real addresses in flat mode
161  Program mkdev.sh: Silently skip already existing nodes
162  Program mkpatch: Include f71805f
163  Program sensord: Do not log algorithm names
164                   Drop EEPROM support (Aurelien Jarno)
165                   Add W83627EHF, F71805F/FG support
166                   Fix PC87365/PC87366 alarms
167  Program sensors: Drop free_the_label
168                   Fix compilation with uclibc (no iconv)
169                   Add f71805f, w83687thf support
170  Program sensors-detect: Drop algorithm names
171                          Do not rely on i2cdetect -l printing algo names
172                          Simplify adapter name matching mechanism
173                          New address for ADM1032, ADT7461
174                          Improve ADT7467, ADT7468 support
175                          Fix MAX6659 reported driver
176                          Add Fintek F71805F detection
177                          Add Analog Devices ADT7476 detection
178                          Add Intel 82845G detection
179                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
180                          Fix udev detection in some corner case
181                          Improve DS1621 detection
182                          Always prefer ISA access over SMBus access
183
184
1852.9.2 (20050906)
186  File doc/chips/*: Big update (2.6 backport)
187  Library: Drop ds1780-specific code (now use adm9240)
188           Fix memory leak in sensors_get_label()
189           Support /sys/class/hwmon (Linux 2.6.14+)
190           Limit stack usage in sensors_read_proc_chips()
191  Makefile: Detect 2.6+ kernels and check targets
192  Man page isaset.8: Fix typos
193  Module adm1031: Fix broken kfree() calls
194  Module i2c-ali1563: New (2.6 backport by Winbond)
195  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
196  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
197          w83627hf.c: Tag find function __init
198  Module lm93: Fix memory leak
199  Module smsc47m1: Fix PWM enable polarity on read
200  Modules w83627hf, w83781d: Allow setting fan divisor to 128
201  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
202                           Added DDR/DDR2 frequency reporting in convenient
203                           form of DDRxxx PCyyyy
204  Program i2cdump: Properly handle short i2c block reads
205  Program fancontrol.pl: Fix compile errors
206  Program mkpatch: Include i2c-ali1563
207                   Include w83792d
208  Program pwmconfig: Fix unsafe temporary file use
209  Program rrd: Support 2.6 kernels
210  Program sensord: Add support for w83637hf
211                   Support pc87360 (Henrik Brix Andersen)
212  Program sensors: Support the VAIO "VGN" prefix for eeprom
213  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
214                          Advertise the w83792d driver
215                          Improve IT8705F and IT8712F detection
216                          Merge LM82 and LM83 detection
217                          Add W83687THF detection
218
219
2202.9.1 (20050412)
221  File doc/busses/i2c-nforce2: Update
222  File doc/chips/it87: Update
223  File doc/chips/lm90: Update for adt7461
224  File doc/chips/mic74: New
225  File etc/sensors.conf.eg: New sections for lm92 and w83792d
226  Library: Add support for 2.6 fscpos driver (Stefan Ott)
227           Fix sis5595 in4 (Aurelien Jarno)
228           Add support for 2.6 gl520sm driver (Maarten Deprez)
229           Add support for 2.6 bmcsensors driver (Yani Ioannou)
230           Add support for w83792d (Chunhao Huang/Winbond)
231           Add support for 2.6 adt7461 (James Chapman)
232           Add support for 2.6 lm92
233           Add support for 2.6 vt1211
234           Add preliminary support for 2.6 w83627ehf
235  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
236            Use -fno-strict-aliasing on all architectures
237  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
238  Module bmcsensors: Fix compile error
239                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
240  Module ds1621: Fix detection (Aurelien Jarno)
241  Module eeprom: Discard SPD-centric checksum module parameter
242                 Cleanup detection function (backport from Linux 2.6)
243  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
244  Module i2c-i801: Temporarily disable broken I2C block read
245  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
246                   Gelato)
247  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
248  Module i2c-viapro: Prevent repeated resets
249  Module it87: Improve Super-I/O detection
250               Limit I2C address range
251               Support VID on the IT8712F
252  Module lm75: Only initialize CMP/INT bit
253  Module lm78: Fix bug with setting negative temperature limits
254  Module lm85: Properly differentiate between ADM1027 and ADT7463
255               Add EMC6D102 support
256  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
257               Add limited ADT7461 support
258  Module lm93: Fix IN10 (+5V) scaling
259  Module mic74: New
260  Module w83627hf: Support secondary Super-I/O address
261                   Enable temp2 and temp3 if they are disabled
262  Module w83781d: Revert AS99127F temp2 and temp3 computation change
263                  Skip final initialization step for AS99127F chips
264  Module w83792d: New (Chunhao Huang/Winbond)
265  Program ddcmon: New; user-space replacement for the ddcmon driver
266  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
267  Program isadump: Handle Super-I/O keys
268  Program lm_sensors.init: Cleanups (Axel Thimm)
269  Program mkdev.sh: Add basic command-line interface
270  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
271  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
272                     Don't complain about read-only enable files (lm85)
273                     Fix handling of alternate config file name
274  Program sensord: Fix erroneous error message (Aurelien Jarno)
275                   Support sis5595 in4 (Aurelien Jarno)
276                   Support w83627thf
277                   Support the separate it8712 prefix (Aurelien Jarno)
278  Program sensors: Display sis5595 in4 (Aurelien Jarno)
279                   No errors on missing pc87360 fans
280                   Add gl520sm support (Maarten Deprez)
281                   Improve vt1211 error/ignore handling (Michael Carland)
282                   Support w83792d, w83627ehf
283  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
284                          Improve IT8705F and IT8712F detection
285                          Improve udev detection
286                          Fix DS1621 detection
287                          Add W83627EHF detection
288                          Add ATI SMBus detection
289                          Add VT1211 alias detection
290                          Warn if chip modules not found
291                          Add i2c-ipmi to list if bmcsensors is on it
292                          Add PC87591 detection
293                          Search for correct udev db file name
294                          Add nForce3 250Gb and nForce4 detection
295
296
2972.9.0 (20041228)
298  NOTE: Requires i2c-2.9.0 or newer!
299  File README.thinkpad: Update
300  File doc/chips/it87: Cleanups
301  File doc/chips/lm63: New
302  File etc/sensors.conf.eg: Set via686a voltage limits
303  File kernel/chips/Module.mk: Resync module list with mkpatch
304  File kernel/include/sensors_compat.h: Define __devexit_p if missing
305                                        (kernels 2.4.16 and older)
306  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
307                             and dec_use removed in release 2.8.0
308  Modules (all chip drivers): Remove owner from i2c_driver; pass
309                              controlling_mod to i2c_register_entry() again
310  Module bmcsensors: Support function 1/x
311  Module i2c-amd756: Display the real bus name
312  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
313  Module i2c-i801: Support i2c block read (ICH5 and higher)
314                   Add PEC support for ICH6
315                   Add support for ICH7
316  Module i2c-ipmb: Remove from build since it doesn't work
317  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
318  Module icspll: Fix compilation
319  Module lm63: New driver for the National Semiconductor LM63
320  Module lm83: Use signed types for temperatures
321               Check limits on register writes
322  Module lm87: Round voltages properly
323               Retry on read errors (David Knierim)
324               Less agressive init (no reset)
325  Module lm90: Use signed types for temperatures
326               Check limits on register writes
327  Module lm93: Added module parameter for VID pin input thresholds.
328               Fix typo in dynamic VID alarms
329               Adds a couple log messages for failed transactions (David
330               Knierim)
331               Fix compilation breaking C99-ism (Axel Thimm)
332               Fix block read retries
333  Module pc87360: Support secondary Super-I/O address
334  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
335  Library: Add lm63 support
336           Add lpc47b397 support
337  Programs *.init: Rename lockfile to match file name
338  Programs i2cset, isaset: Written byte/word can be masked
339  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
340  Program mkpatch: Include i2c-amd756-s4882
341  Program pwmconfig: Handle new (well, back to old) pwm files names for
342                     Linux 2.6.10 and up
343  Program sensord: Do not scale load average (Aurelien Jarno)
344  Program sensors: Add lm63, lpc47b397 support
345                   Support DDR2 memory module EEPROMs (Rudolf Marek)
346                   Support only one location for the default configuration file
347                   Display the default configuration file location in --help
348                   Simplify the configuration file opening code
349  Program sensors-detect: Improve LM63 detection
350                          Discard IBM Thinkpad detection code
351                          Add PCA9556, LPC47B397, ICH7 detection
352                          Fix W83792D detection, add W83791SD detection
353
354
3552.8.8 (20041007)
356  File doc/donations: Update
357  File doc/lm_sensors-FAQ.texi: Add 4.6.1
358                                Update 4.7
359  File doc/chips/gl518sm: Update "iterate" info
360  File doc/chips/it87: Discard outdated module parameters
361  File doc/chips/lm75: LM77 is not supported
362  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
363  File doc/chips/lm93: New
364  File doc/chips/w83l785ts: Improvements
365  File etc/sensors.conf.eg: Fix it87 lines order
366                            Update lm87 section
367  File kernel/include/sensors_vid.h: Support VRM 10.0
368  Library: Support 2.6 adm1025
369           Preliminary support for 2.6 lm87
370           Support 2.6 adm9240
371           Allow an alternative sysfs file name for chip features (2.6)
372           Fix lm83 critical limits (2.6)
373           Add lm93 support
374           Prevent some procfs errors from being silently ignored
375  Makefiles: Implement user_uninstall (Rudolf Marek)
376             Spoof LOGNAME and HOSTNAME when making html man pages
377  Module adm1025: Refine detection
378                  Update limit registers again (revert of 2.8.1)
379                  Init high limits if they read 0
380                  Fix conversions
381  Module lm75: Refine detection
382  Module lm78: Fix init
383  Module lm83: Default to kind lm83 if forced.
384               Fix temperature macros.
385  Module lm90: Add LM86, MAX6657 and MAX6658 support
386  Module lm93: New
387  Module mtp008: Fix the setting of limits on temp2
388  Module pca9540: Refine detection
389  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
390                  Support VID
391                  Fix fan_div file when fan count is less than 3
392                  Additional init and debug
393  Module smsc47m1: Fix pwm_enable being inverted
394  Module w83627hf: Add alternate VCORE/in0 calculation method
395                   Remove reset of chip by driver on initialization
396  Module w83781d: Fix default VRM for w83791d
397  Module w83l785ts: Implement read error handling (backport from 2.6)
398  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
399                    Wait for user input to continue (as opposed to 5 sec
400                    delay), can be skipped with -y
401                    Various cleanups and code refactoring
402                    Update manual pages
403  Program fancontrol.init: New (Dean Takemori)
404  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
405  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
406                           (Giuseppe Della Bianca)
407  Program mkdev.sh: Detect devfs and refuse to run
408                    Use mknod's mode instead of chmod
409  Program mkpatch: Include xeontemp and pc87360
410  Program sensors: Rework adm1025 support
411                   Display pc87365/pc87366 VID
412                   Improve smsc47m1 support
413                   Hide 2.6 adm1027 alarm_mask being missing
414                   Print VRM version for all supported chips
415  Program sensors-detect: Support LM93, LM77, LM63
416                          Support PC8739x Super-I/O family (no sensors)
417                          Fix PCA9540 support
418                          Refine ADM1025/ADM1025A detection
419                          Refine LM75 detection
420                          Ignore missing /proc/modules (Andras Bali)
421                          Script-wide Perl cleanups
422                          Support udev
423                          Support W83792D, LM96000
424
425
4262.8.7 (20040611)
427  File README.thinkpad: Update 24RF08 status
428  File doc/fan-divisors: More info on accuracy
429  File doc/lm_sensors-FAQ.texi: Update 4.27
430  File doc/chips/adm1031: New
431  File doc/chips/max1619: New
432  File doc/chips/pc87360-fan: Renamed to pc87360
433  File doc/chips/pc87360: Big update
434  File doc/chips/w83781d: Update AS99127F documentation
435  File etc/sensors.conf.eg: Add comments about BP6 voltages
436                            Add comment on Asus A7V8X-X VCore
437                            Misc fixes to lm80 section
438                            Update via686a section
439                            New lm99 section
440                            Add section for LM85-like chips
441                            Preliminary pc87366 section
442                            Add comment on GL520SM application modes
443                            Document beep_enable (Aurelien Jarno)
444                            Preliminary max1619 section
445                            Preliminary adm1030 and adm1031 sections
446  Library: Fix 2.6 VRM
447           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
448           Fully support the PC87360 family
449           Support the lm99
450           Add version and date strings
451           Support 2.6 max1619
452  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
453  Man page i2cdetect.8: document new command line flags
454  Man page i2cdump.8: More details on how i2cdump can write to a chip
455  Modules (all chip drivers): Rework memory allocation scheme.
456  Module adm1031: New (Alexandre d'Alton)
457  Module bmcsensors: Fix oops by creating thread for initialization
458  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
459  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
460          asb100.c, lm92.c: Use swab16
461  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
462  Module gl520sm: Less agressive initialization process
463                  Fix temp1 limits being unsettable in application
464                  Ensure that temp2 and in4 are not used at the same time
465  Module i2c-i801: Support 6300ESB and ICH6
466  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
467  Module i2c-sis645: Add support for SiS655
468  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
469  Module lm90: Support LM99 and LM89
470  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
471               Get rid of useless i2c_probe call
472  Module max1619: New (Alexey Fisher)
473  Module p4b_smbus: Add support for mobile versions of the 82801
474                    (Axel Thimm)
475  Module pc87360-fan: Renamed to pc87360
476  Module pc87360: Also support PC87365 and PC87366
477                  Add write support
478                  Correctly set the chip name depending on the type
479                  Add voltage and temperature support
480                  Fix fan speed computation
481                  Retrieve fans configuration from Super-I/O space
482                  Export pwm_enable (read-only)
483                  Honor pwm invert bits
484                  Clear fan alarms after we read them
485                  Do not read fan data when monitoring is disabled
486                  Do not include SENSORS_INSMOD stuff
487                  New module parameter: init
488                  Fan clock dividers change automatically
489                  Add thermistor dupport
490  Module smsc47m1: Lock on reads and writes
491                   Various PWM fixes
492  Module thmc50: Fix address range
493  Module via686a: Fix voltage roundings
494                  Simplify temperature conversions
495  Module w83781d: Drop PWM support for as99127f
496                  Invert AS99127F beep bits in driver rather than user-space
497  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
498  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
499  Program fancontrol.pl: New
500  Program i2cdetect: Adapt probing method to address
501                     Add -q and -r flags to force probing methods
502                     Allow probing range selection
503  Program isadump: Major improvements
504  Program isaset: New
505  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
506                   module
507                   Include i2c-nforce2
508  Program sensord: New --rrd-no-average parameter
509                   Syncronize time slots with rrd
510                   Fix W83781D temp3 alarm (Aurelien Jarno)
511                   Add ASB100 support (Andrew May)
512  Program sensors: Fully support the PC87360 family
513                   Fix lm80 temperature alarms
514                   Support the lm99
515                   Do not invert AS99127F beep bits anymore
516                   Fix W83781D temp3 alarm (Aurelien Jarno)
517                   Print library version string
518  Program sensors-detect: Rework Super I/O detection
519                          Support SiS655/SiS96x
520                          Support ADT7461 and ADT7467
521                          Better support for ADM1027, ADT7460 and ADT7463
522                          Explicitly support ADM1028
523                          Scan all logical devices of PC87365 and PC87366
524                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
525                          Detect eeproms with software write protect (not
526                          enabled by default)
527                          Support ALi 1563 (2.6 only)
528                          Drop LTC1710 support
529                          Use byte reads for probing on ranges 0x30-0x37 and
530                          0x50-0x5F
531                          Improve LM89 and LM99 support
532                          Support GeForce FX 5900 video cards
533                          Fix devfs misdetection (Aurelien Jarno)
534                          Detect 6300ESB, ICH6
535                          Fix double detection of ISA chips
536                          Support MAX1619
537                          Support PC87373 Super-I/O
538                          Fix unknown adapters appearing multiple times
539                          Refine MAX6650/MAX6651 detection
540
541
5422.8.6 (20040405)
543  File README.thinkpad: Update status
544  File doc/chips/pca9540: New
545  File doc/chips/pc87360-fan: New
546  File etc/sensors.conf.eg: Update pcf8591 default configuration
547  Library: Switch to new sysfs naming standard
548           Fix gcc 3.3 warnings (Philipp Thomas)
549           Support 2.6 ds1621 and pcf8591
550           Change pcf8591 magnitudes
551           Support pc87360-fan
552  Makefile: Install shared library 755
553  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
554  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
555  Modules ds1621, pcf8591: Check for capabilities before using them
556                           (Aurelien Jarno)
557  Modules pcf8574, pcf8591: Cleanups
558  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
559  Module adm1021: Better detection and initialization
560  Module pca9540: New driver for the Philips PCA9540
561  Module pc87360-fan: New driver for the National Semiconductor PC87360,
562                      PC87363 and PC87364 Super I/O chips
563  Module smsc47m1: Support the LPC47B27x
564  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
565  Program i2cdetect: Skip special addresses by default
566  Program sensord: Prevent null pointer dereference (Tim Toohey)
567  Program sensors: Print the degree symbol in the terminal's current locale
568                   (Aurelien Jarno)
569                   Update pcf8591 print to support 2.6 driver
570                   Support pc87360-fan
571  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
572                          Improved SiS chips support
573                          Add a white list of IBM systems
574                          Drop support of undetectable adapters
575                          Fix smart battery detection
576                          Add smart battery charger and manager detection
577                          Rework adm1021 and clones detection
578                          The PC87360, PC87363 and PC87364 Super I/O chips
579                          now have a (preliminary) driver
580                          Rework Super I/O detection
581                          Better support of devfs
582  Program sensors-detect-stat.pl: New
583
584
5852.8.5 (20040305)
586  File doc/chips/SUMMARY: Update
587  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
588  Makefiles hotplug and rrd: Remove -o and -g arguments to install
589  Module bmcsensors: Increase max SDRs to 100
590  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
591  Module i2c-amd756: Don't register driver to avoid driver conflicts.
592                     (Daniel Rune Jensen)
593  Module it87: Better temperature sensor types handling (Takeru Komoriya)
594               Fix reset=1 (Takeru Komoriya)
595  Module lm80: Code cleanups
596  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
597  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
598  Module w83627hf: Add w83637hf support
599                   Fix exported name
600                   Fix PWM in w83627thf
601                   Preserve other bits when forcing temp2/3 to comparator mode
602  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
603                  Remove asb100 support
604  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
605          Define driver ID if i2c-id.h doesn't have it yet.
606  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
607          Backport oops fix from Linux 2.6.
608  Modules (all chips): Get rid of useless headers
609  Program decode-edid.pl: Add sysfs support
610  Program sensors: Add w83637hf support
611                   Add support for Shuttle Ethernet EEPROMs
612                   Drop 2.6 subclient detection
613  Program sensors-detect: Add heuristics to the LM80 detection function
614                          Add support for W83L785R, improve W83L784R/AR
615                          Add GeForce FX 5600 as supported by rivatv
616                          More Super IO chips, better handling
617  Library: Update to match renames in fscher
618           Reverse temporary changes to w83l785ts mappings
619           Fix vt1211 and vt8231 uch_config not being writable
620           Add 2.6 lm80 support
621           Add w83637hf support
622           Remove in6 and temp1 from vt1211 and vt8231
623           Add support for Shuttle Ethernet EEPROMs
624           Remove unused as99127f features
625
626
6272.8.4 (20040207)
628  File doc/lm_sensors-FAQ.texi: Update 4.20.
629  File doc/chips/it87: Change hyst to low
630  File doc/chips/w83l785ts: New
631  File etc/sensors.conf.eg: Change it87 hyst to low
632                            Fix w83697hf supposed to have temp3
633                            Limits initialization for adm1025/ne1619
634                            Handle fscher voltage conversions
635                            Add Tyan Trinity S2495 KT400 setup (Eric
636                              Schumann)
637                            Fix fscher fan labels (Reinhard Nissl)
638  Library: Better 2.6 eeprom support
639           Change it87 hyst to low
640           Add 2.6 gl518sm, fscher support
641           Fix 2.6 negative voltages handling
642           Temporary fix to w83l785ts mappings
643  Module adm1025: Separate prefix for NE1619
644  Module adm1026: Remove use of temporary ID
645                  Define addresses as a range
646  Module bmcsensors: Fix reservations
647  Module fscher: Externalize voltage conversions
648  Module eeprom: Remove memtype
649  Module i2c-piix4: Fix resource release error
650                    Various cleanups
651  Program decode-vaio.pl: Add sysfs support
652  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
653                   Drop linux 2.2 support
654                   Add w83627hf
655  Program sensors: Do not show algorithm by default
656                   Cleanup temperature unit display code
657                   Cleanup label spacing code
658                   Fix output to UTF-8 terms (Marcel Sebek)
659                   Simplify gl518sm print
660                   Do not ignore errors in FSC chips prints
661                   Fix w83l785ts print
662                   Cleanup FSC chips prints
663  Program sensors-detect: Fix PATH issues
664                          Correctly point to the fscher driver
665
666
6672.8.3 (20040115)
668  File lm_sensors.spec: Update
669  Library: Add 2.6 eeprom, lm90 support
670           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
671  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
672  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
673  Module i2c-amd756: Fix byte writes
674  Module i2c-tsunami: Cleanups (Daniel Nilsson)
675  Module it87: Fix sg_tlx writes; fix sensor type reporting;
676               add 8712 Super I/O detection;
677               remove initialization of temp_type and fan_ctl;
678               remove init and temp_type module parameters
679  Module lm90: Handle hysteresis differently
680  Module smartbatt: Fix detection, magnitudes, temp
681  Module w83781d: Fix negative voltages
682  Module w83l785ts: New
683  Program eeprog: Make 8 bit mode the default
684  Program fancontrol: Improvements, fixes, support 2.6 kernels
685  Program mkpatch: Add lm75.h
686  Program pwmconfig: Improvements, fixes, support 2.6 kernels
687  Program sensors: Add ASB100 support
688  Program sensors-detect: Add 8712 Super I/O detection;
689                          add W83L785TS detection
690
691
6922.8.2 (20031211)
693  IMPORTANT: Limit initialization removed from all chip drivers!
694             If you didn't run 'sensors -s' in the past you may need to now!
695  File sensors.conf.eg: Change lm75 scaling back to 1;
696                        Add example for asb100
697  Library: Fix bmcsensors scaling, increase number of sensors;
698           Add w83627thf support; Advance version to 3.0.0;
699           Add hermes, ADM1032, ASB100 support;
700           Add it87 sensor type support;
701           Add sysfs support for kernel 2.6;
702           Fix memory leaks
703  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
704             Fail if no kernel .config file exists;
705             Don't build module dependencies for user and user_install
706  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
707          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
708          smsc47m1, thmc50, via686a, w83627hf, w83781d:
709          Remove initialization of limits by driver.
710  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
711  Modules (chip): Init cleanups
712  Module asb100: New
713  Module bmcsensors: Fix voltage scaling, voltage and fan limits
714  Modules ddcmon, eeprom: Add failure printks
715  Module fscher: New (Fujitsu-Siemens Hermes driver)
716  Module i2c-amd756: Fix AMD8111 support
717  Module i2c-amd8111: Fix byte writes
718  Module i2c-nforce2: Fix byte writes
719  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
720  Module i2c-sis630: Sync with 2.6.0-X driver version
721  Module i2c-viapro: Add support for Via 8237
722  Module it87: Add pwm and "smart guardian" support;
723               add it87 sensor type support
724  Module lm75: Fix negative voltages
725  Module lm90: Add ADM1032 support
726  Module w83781d: Fix 791d and 627hf detection
727  Module w83627hf: Add VID support
728  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
729  Program eeprog: New
730  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
731                                       support sysfs for i2c bus search
732  Program i2cdetect: Add -l option to list busses
733  Program i2cdump: Add 'c' mode for consective address reads
734  Program mkpatch: Cleanups
735  Program pwmconfig: Handle multiple fans controlled by a single pwm
736  Program sensord: Remove ddcmon support
737  Program sensors: Add ADM1032 support; add messages for sysfs
738  Program sensors-detect: Prefer Super I/O drivers;
739                          Fix W83627HF and W83791D detection; detect CSB6;
740                          Detect ADM1029, ADM1030, ADM1031;
741                          Detect W83637HF, W83697UF;
742                          Add it87 sensor type support; add sysfs support
743                          Reduce lm80 misdetects; remove PCFxxxx "detection"
744                          Detect VT8237 (KT600)
745                          Use VPD instead of DMI+ACPI for Thinkpad detection
746                          Suggest new asb100 driver instead of w83781d
747
748
7492.8.1 (20031005)
750  NOTE: Requires i2c-2.8.1 or newer!
751  File sensors.conf.eg: Improved adm1025 section
752                        Default temp labels for as99127f
753                        Improved lm83 section
754                        Better support for Asus A7V8X-X
755  File doc/chips/SUMMARY: Add SMSC manufacturer ID
756  File doc/chips/adm1025: Add decent documentation (almost new)
757  File doc/chips/lm83: Known motherboards list update, misc updates
758  Library: Change adm1025 names (hyst/over become low/high)
759           Swap adm1025 temp1 and temp2 to match the driver's order
760           Advance version to 2.0.1
761           Update lm83 support
762           Add support for lm90, xeontemp, max6650
763           Add separate messages for read and write errors
764           Add missing message for parse error
765  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
766  Modules (various): Fix includes for compilation on Alpha
767                     Use the new i2c_delay function instead of the various
768                     do_pause functions
769  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
770  Module i2c-nforce2: Cleanups
771  Module i2c-i810: Use readl/writel for portable access to PCI memory
772  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
773  Module i2c-savage4: Use readl/writel for portable access to PCI memory
774  Module i2c-sis630: Fix detection
775                     Add block data read/write support
776  Module i2c-sis645: Detection method change/bugfix
777  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
778  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
779  Module adm1025: Major driver update
780                  Add support for Philips NE1619
781                  Simplify the driver a lot (unified voltages, unified
782                  temperatures and much more)
783                  Fix default voltage limits
784                  Change default temperature limits
785                  Swap remote and local temperatures to match the internal
786                  registers order (make the code unification possible)
787                  Export remote diode fault through alarms
788  Module ddcmon: Major update
789                 Add half a dozen new features
790                 Add checksum parameter (same as for the eeprom module)
791                 Fix monitor limits
792  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
793  Module lm78: Fix a fan_div/fan_min bug
794  Module lm83: Add t_crit and alarms support
795  Module lm90: New
796  Module max6650: New
797  Module saa1064: New
798  Module smsc47m1: Add support for 47M142
799  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
800                   enhance w83627thf support
801  Module w83781d: Enhance chip detection; clean up error returns;
802                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
803  Module xeontemp: New
804  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
805                           Mark Rambus as unsupported
806  Program decode-edid.pl: New
807                          Interfaces between our eeprom module and
808                          parse-edid from the read-edid project
809  Program p4b_smbus: Fix SMP compilation
810  Program sensord: Add support for IT87 (Mike Black)
811                   Change ADM1025 support to match the changes made to
812                   the library
813  Program sensors: Rewrite and enhance EEPROM support
814                   Change LM83 and ADM1025 support to match the changes
815                   made to the library
816                   Add DRDRAM support to print_eeprom
817                   Exit(1) on /proc write failure (Malte Starostik)
818                   Add LM90, MAX6650 support
819  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
820                          Add support for LM82, LM86, LM89
821                          Improved W83781D family detection
822                          Add support for AS19927F rev.2, ASB100 Bach
823                          Add support for Asus Mozart-2 (3 types)
824                          Add support for NE1619
825                          Add support for FSC Hermes
826                          Make sure /sbin is in the user's path
827                          Fix EEPROM detection
828                          Automatic module.conf and /dev/i2c* detection
829                          Improve LM82 and LM83 detection
830                          Handle "to-be-written" cleanly
831                          Add detection for 47M14x Super I/O
832                          Handle the one-address-many-chips-same-driver
833                          case
834
835
8362.8.0 (20030714)
837  NOTE: Requires i2c-2.8.0 or newer!!!
838  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
839                  2.4.13 or later required for mkpatch.
840  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
841                  i2c package
842  File doc/chips/fscscy: Add watchdog documentation
843  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
844  File sensors.h: Now automatically generated
845  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
846           add adm1026, lm83, lm85, w83791d support;
847           Advance version to 2.0.0
848  Makefiles: Generate warnings if new library won't be found by ld.so;
849             Modules now install in kernel/drivers/i2c/[busses,chips];
850             Ensure that headers in /usr/local/include are used first;
851             Don't use /usr/include headers for modules;
852             Handle multiple UTS_RELEASE definitions in linux/version.h;
853             Automatically generate kernel/include/sensors.h;
854             Remove old gzipped modules; remove old misc directory if empty;
855             Remove pre-2.4 installation method;
856             -Wall now the default;
857             Add new targets user, user_install, and help;
858             Run depmod after module installation
859  Modules (all): Cleanups including
860                - Add #include <i2c-proc.h>
861                - C99 initializers
862                - Remove #ifdef MODULE
863                - Remove #ifndef THIS_MODULE
864                - Remove #ifndef MODULE_LICENSE
865                - Remove other 2.1/2.2 #ifdefs
866                - Remove #include "sensors.h", copy SYSCTL defs to module
867                - Remove excess #includes
868                - Remove argument in i2c_register_entry()
869                - Remove dummy xxx_command() definition
870                - Remove EXPORT_NO_SYMBOLS
871                - Remove init_MUTEX #define
872                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
873                  no longer adjust their own refcounts
874                - Use module_init() and module_exit()
875                - Update to new i2c_driver struct definition
876  Modules (bus PCI): Convert to PCI-module-style initialization
877  Modules (several): Add support for AMD Opteron VRM (VID) encoding
878  Module adm1021: Set alarm on failed reads and report old value;
879                  merge changes from kernel 2.5.54
880  Module adm1026: New
881  Module bmcsensors: Fix compile when DEBUG=1
882  Modules ddcmon, eeprom: Use i2c block reads if possible;
883                          better error handling
884  Module ds1307: Add to Makefile
885  Module gl520sm: Fix temperature over/hyst writes
886  Module lm75: merge changes from kernel 2.5.54
887  Module lm83: New
888  Module lm85: New
889  Module i2c-ali1535: Check for invalid transaction
890  Module i2c-ali15x3: Check for invalid transaction
891  Module i2c-amd756: merge changes from kernel 2.5.54;
892                     check for invalid transaction
893  Module i2c-amd8111: merge changes from kernel 2.5.54
894  Module i2c-i801: Add support for 82801EB (ICH5)
895  Module i2c-i810: Fix for some chips
896  Module i2c-nforce2: New
897  Module i2c-piix4: Check for invalid transaction
898  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
899  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
900        north bridges; SiS962 and SiS963 south bridges
901  Module i2c-viapro: Check for invalid transaction
902  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
903          pwm and pwm enable support; update docs
904  Module smbus-arp: Check adapter for HW or SW PEC support;
905                    add reset option
906  Module w83781d: Add support for w83791d
907  Module w83627hf: New
908  Program decode-dimms.pl: Recognize DDR and Rambus
909  Program eeprom: Fix writes for small eeproms
910  Program eeprom, eepromer: Use local i2c-dev.h for build
911  Program fancontrol: New
912  Program lm_sensors.init: Call sensors -s in start()
913  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
914                   Add adm1026,lm85 support;
915                   Remove sensors.c file; add sensors_compat.h;
916                   Remove patches to i2c-core.c and drivers/char/mem.c;
917                   Now works only for kernels 2.4.13 or later
918  Program p4b_smbus: Fix 'make install';
919                     Install in same place as other modules;
920                     Clear correct bits in config word
921  Program pwmconfig: New
922  Program sensors: add adm1026, lm85, w83791d support
923  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
924                          w83627hf, w83627thf, w83697hf);
925                          Add support for SiS651, SiS961, SiS745, SiS746;
926                          Support dmidecode 2.0 and later;
927                          Fix "C" format error;
928                          Add support for adm1026, 82801EB (ICH5), W83791D;
929                          Add support for w83l785ts, nForce2;
930                          Fix UTF-8 incompatibility;
931                          Better support for lm75;
932                          Add support for lm83
933
9342.7.0 (20021208)
935  NOTE: Requires i2c-2.7.0 or newer.
936  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
937  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
938  File doc/busses/i2c-sis645: Add license
939  File doc/chips/lm92: Add license, features
940  File doc/chips/maxilife: Add license, parameters, features
941  File doc/chips/smartbatt: Complete rewrite
942  File doc/chips/vt8231: Add license, parameters
943  File sensors.conf.eg: Add section for lm75; complete the lm78 section
944  Library: Add support for MC1066; add multiple VRM version support for lm87;
945           enhance adm1023 support; initial support for Sony Vaio eeprom;
946           add support for bmcsensors; add hacks for additional dummy drivers
947  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
948            add flags for x86_64 compiles
949  Module adm1021: Add support for MC1066
950  Module bmcsensors: New
951  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
952                   kernel 2.5.43; fix 2.2 kernel compiles
953  Module gl518sm: Iterate allowed only for rev 0x00
954  Module i2c-amd756: Configure base address for nForce support;
955                     check for uninitialized base address;
956                     add support for amd8111 (SMBus 1.0)
957  Module i2c-amd8111: New (SMBus 2.0)
958  Module i2c-ipmb: New
959  Module i2c-ipmi: New
960  Module i2c-keywest: Sync with kernel 2.4.20
961  Module i2c-sis630: Add support for SiS730
962  Module i2c-sis645: Improve support for SiS645/961;
963                     add support for SiS645DX/961 and SiS735;
964                     fix 2.2 kernel compiles
965  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
966  Module lm87: Add multiple VRM version support
967  Module vt1211: Fix inx limits and alarms; fix in0
968  Module vt8231: Fix inx limits and alarms; fix in0
969  Module w83781d: Fix in0/in1 initialization
970  Module smartbatt: New
971  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
972  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
973                           stop decoding on checksum error
974  Program dmidecode: Fix read bug; upgrade to version 1.8
975  Program doc-insmod: Complete rewrite; fix author output
976  Program doc-features: Complete rewrite; handle missing sysctl entries;
977                        handle unknown prefix with suggestion
978  Program lm_sensors.init: Remove spaces bug; add green/red output
979  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
980  Program rrd: Add sanity limits to newly-created RRD.
981  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
982  Program sensors: Add support for MC1066, Rambus Rimms;
983                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
984                   initial support for Sony Vaio eeprom
985  Program sensors-detect: Add support for MC1066, smart battery, 8235,
986                          IPMI, AMD8111; add help if no sensors found;
987                          add ACPI method for IBM system detection;
988                          work with old Perl versions again;
989                          initial support for Sony Vaio eeprom
990
9912.6.5 (20020915)
992  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
993  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
994  Library: Fix fan3_div writes for w8378* and it87; add vt8231
995  Module dmi_scan: new
996  Module ds1621: Fix enable/disable
997  Module eeprom: Do not corrupt 24RF08's when checksum=1
998  Module i2c-i801: Check for uninitialized base address;
999                   enable if not enabled
1000  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1001  Module i2c-sis630: new
1002  Module i2c-sis645: new
1003  Module lm92: Fix in-kernel initialization
1004  Module via686a: Remove VT8231 support
1005  Module vt8231: new
1006  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1007  Program dmidecode: new
1008  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1009  Program mkpatch: Add Config.in entries for, lm92,
1010                   pcf8574, pcf8591, smsc47m1, vt1211;
1011                   add dmi_scan
1012  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1013  Program lm_sensors.init: fix stop()
1014  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1015                   add support for logging loadavg in RRD;
1016                   fix down-converting raw labels for RRD;
1017                   update chip support, still behind sensors
1018  Program sensors: Add /usr/local/etc to config file path;
1019                   fix -c and -u flags; add vt8231
1020  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1021                          refuse to run on IBM systems;
1022                          fix sysconfig module numbering;
1023                          change quick write to not corrupt 24RF08's
1024
10252.6.4 (20020719)
1026  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1027  File doc/vid: New
1028  File include/sensors_vid.h: New
1029  File sensors.conf.eg: Add vt1211, smsc47m1
1030  Library: Add multiple VRM version support for adm1025, w83781d;
1031           fix 'flex scanner jammed' on some systems;
1032           add vt1211, smsc47m1, lm92;
1033           fix access mode checking
1034  Makefiles: For 2.4+ kernels, modules now install in
1035             kernel/drivers/[i2c,sensors] , not misc/ , and
1036             'make install' removes old versions in misc/ .
1037             Use $CFLAGS and $CPPFLAGS if defined.
1038  Module adm1025: Add multiple VID version support
1039  Module ds1307: new
1040  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1041                     reliability improvements
1042  Module i2c-hydra: Flush posted writes
1043  Module i2c-i801: Add support for 82801DB (ICH4)
1044  Module i2c-i810: Flush posted writes
1045  Module i2c-savage4: new
1046  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1047  Module i2c-voodoo3: Flush posted writes
1048  Module ds1307: New
1049  Module lm92: New
1050  Module smbus-arp: new
1051  Module smsc47m1: new
1052  Module via686a: Add support for VT8231 sensors
1053  Module vt1211: new
1054  Module w83781d: Add multiple VID version support; fix temp alarms
1055  Program eeprom: new
1056  Program i2cdump: Add smbus block command specification, add PEC support
1057  Program lm_sensors.init: new
1058  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1059                   pcf8574, pcf8591, smsc47m1, vt1211
1060  Program p4b_smbus: Add support for ICH4
1061  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1062  Program sensord.init: Renamed, was prog/init/sensors
1063  Program sensord: Major update, now requires rrd source;
1064                   not compiled by default
1065  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1066                   (don't display algo. and adap.) option;
1067                   add vt1211, smsc47m1, lm92
1068  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1069                          add 82801DB, LM85; fix perl warnings;
1070                          generate /etc/sysconfig/lm_sensors for
1071                          lm_sensors.init script
1072
10732.6.3 (20020322)
1074  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1075  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1076  File doc/chips/it87: add more temp_type help
1077  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1078                        add adm1021 section; add lm87 AIN[1,2] template;
1079                        swap negative voltage limits for 782d,783s,627hf,
1080                        697hf,it87; add more it87 help; swap neg. voltage
1081                        limits for lm78(-j), lm79, w83781d, as99127f
1082  Library: Add PCF8591, W83697HF, ADM1023 support;
1083           fix w83* fan_min computes;
1084           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1085  Module adm1024: Add MODULE_LICENSE("GPL")
1086  Module bt869: Add s-video out and DVD resolution support
1087  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1088  Module fscscy: implement min/max for voltages and fans
1089  Module i2c-amd756: Add support for AMD768
1090  Module i2c-i810: Add support for 810E
1091  Module i2c-keywest: Big update, sync with kernel 2.4.18
1092  Module i2c-piix4: Check for uninitialized base address
1093  Module i2c-sis5595: Blacklist 645, 735
1094  Module i2c-viapro: Check for uninitialized base address
1095  Module gl518sm: Standardize /proc entries in0-3
1096  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1097               fan -> fan1; fix temp2 limit writes
1098  Module pcf8574: Add support for PCF8574A; /proc interface changed
1099  Module pcf8591: new
1100  Module sis5595: Blacklist 645, 735
1101  Module w83781d: Add W83697HF support; allow force_subclients parameter
1102                  for Tyan 2460
1103  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1104  Program decode-vaio.pl: new
1105  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1106                   add text output
1107  Program init/sensors: New SysV init script
1108  Program mkpatch.pl: Add support for fscscy, add more help entries
1109  Program p4b_smbus: new
1110  Program rrd: Install summ_week.cgi
1111  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1112                   clean up chassis intrusion prints
1113  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1114                          fix Via686a and it87 detection;
1115                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1116                          fix uninitialized values; it87 beats lm78
1117
11182.6.2 (20011118)
1119  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1120  Chip Modules (all): malloc.h -> slab.h
1121  Modules (all): Add MODULE_LICENSE("GPL")
1122  File doc/FAQ: More updates and additions
1123  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1124  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1125           update it87 alarm ID's.
1126  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1127  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1128  Module i2c-amd756: Improve busy handling/printk's
1129  Module i2c-i801: Add 82801CA/CAM support
1130  Module i2c-keywest: Sync with PPC people, it works now
1131  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1132  Module i2c-viapro: Add Via VT8233 support
1133  Module it87: Merge alarm_* /proc entries to alarms
1134  Module sis5595: Fix support for rev B0
1135  Module via686a: Make limit initializations reliable
1136  Module w83781d: Allow init=0 parameter to bypass initialization
1137  Program isadump: Add flat address space (PCI) support
1138  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1139                      fscpos, it87, maxilife, mtp008
1140  Program sensors: Fix w83781d temp precision
1141  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1142                          Fujitsu Poseidon and Scylla,
1143                          Intel 82443MX and 82801CA/CAM detection,
1144                          add ITE 8172G detection (driver in kernel 2.4.10)
1145
11462.6.1 (20010830)
1147  File BUGS: Updated
1148  File doc/FAQ: More updates and additions
1149  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1150  File sensors.conf.eg: Fix/enhance it87 section
1151  Library: ds1621 and it87 updates
1152  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1153  Module i2c-amd756: Add AMD 766 support
1154  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1155  Module i2c-piix4: Add Serverworks CSB5 support
1156  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1157  Module adm1025: Fixed temp2 min/max writes
1158  Module ds1621: Add 12-bit precision mode
1159  Module it87: Enable all alarms, add in8 support, add sensor type selection
1160  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1161                  remove support for module
1162  Module sis5595: Recognize unsupported chips and refuse to load
1163  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1164  Program eepromer: new
1165  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1166                      of sensors.c as a module in kernel
1167  Program sensors: it87 updates; adjust temp. precision for some chips
1168  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1169                          recognize unsupported SiS chips;
1170                          recognize AMD 766 and Serverworks CSB5.
1171
11722.6.0 (20010612)
1173  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1174        If your make fails because it can't find <linux/i2c-proc.h>, you
1175        forgot this step!!!
1176  File doc/FAQ: Many, many updates and additions
1177  File doc/busses/i2c-sis5595: new
1178  File doc/busses/i2c-tsunami: new
1179  File doc/chips/it87: new
1180  File doc/chips/via686a: Claim support for 686b.
1181  File README.thinkpad: new
1182  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1183                        Add lm87, adm9240, ds1780, lm81 templates;
1184                        Enhance help comments in file;
1185                        Add Tyan S2510 dual-MTP008 example;
1186                        Make separate sis5595 section.
1187  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1188  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1189  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1190           Add support for maxilife-nba and amd1024;
1191           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1192  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1193  Chip Modules (all): Change from sensors_* to i2c_* globals
1194                      for new i2c-proc.[ch]
1195  Makefiles: enhance to support Alpha architecture
1196  Module adm1021: Fix lm84 and gl523sm support
1197  Module adm1024: new
1198  Module i2c-i801: Chip detection cleanup
1199  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1200  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1201  Module i2c-tsunami: New
1202  Module i2c-via: Ensure i2c bus is tristated correctly.
1203  Module it87: new driver for IT8705, IT8712, Sis950 chips
1204  Module lm78: Recognize chipid=0x20
1205  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1206  Module mtp008: Fix temp initializations;
1207                 Save BIOS pin configuration of temps and fans;
1208                 Fix sensor type reads/writes and fan min writes;
1209                 Fix spurious invalid sensor type messages
1210  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1211                  used for patched kernel now.
1212                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1213  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1214                  Allow force_addr=0xaddr
1215  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1216  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1217                  reading changes; Add messages for subclient
1218                  registration failure
1219  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1220  Program i2cset: new
1221  Program isadump: fix for Alpha arch. compiles
1222  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1223                      Remove ltc1710; Fix i2c_sis5595 typo;
1224                      Support kernel 2.4.5 makefile change;
1225                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1226  Program sens_update_rrd: new
1227  Program sensord: Add -d (debug) and -p (pid-file) options
1228  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1229                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1230                   Change mtp008 temps from max/min to limit/hyst;
1231                   Add maxilife-nba, adm1024, it87 support.
1232  Program sensors-detect: Recognize lm78 with chipid=0x20;
1233                          Recognize SMSC Victory66 South Bridge;
1234                          Add devfs /dev/i2c/x support;
1235                          Add adm1024, it87xx support; Add thinkpad warning.
1236  Program tellerstats: new
1237
12382.5.5 (20010115)
1239  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1240        you have kernel 2.4.0-prerelease or greater.
1241  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1242  File doc/developers/proc: new
1243  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1244  Library: Add ds1621, mtp008 support
1245  Module adm1021: Add support for adm1021a / adm1023
1246  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1247  Module adm1025: Add support for remote temp; rename /proc entries to
1248                  in[0-5] and temp[1-2]; fix negative temp readings
1249  Module adm9240: Rename /proc entries to in[0-5]
1250  Module ddcmon: allow force and force_ddcmon parameters
1251  Module ds1621: new
1252  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1253  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1254  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1255  Module lm87: cleanup, update voltage calculations
1256  Module mtp008: new
1257  Module pcf8574: change update time to 5 seconds
1258  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1259  Module w83781d: fix beep setting via /proc
1260  Programs editticket, readticket: new
1261  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1262  Program mkpatch.pl: more fixes; now adds many more modules
1263  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1264                   add adm1025 temp2; report temp limits correctly as
1265                   min/max or limit/hysteresis; print message if no
1266                   sensors are found. Removed false errors from lm87 reads.
1267  Program sensors-detect: Add ds1621, mtp008 detection;
1268                          add ServerWorks detection
1269
12702.5.4 (20001012)
1271  Module i2c-viapro: Add support for Via 596B (0x3051)
1272  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1273  Program mkpatch.pl: fixed infinite loop
1274  Program sensors-detect: Detect Via 596B (0x3051)
1275
12762.5.3 (20001008)
1277  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1278  File useful_addresses.html: update
1279  Library: Add lm87 support
1280  Module pcf8574: new
1281  Module i2c-ali1535: new
1282  Module i2c-ali15x3: removed force #ifdef.
1283  Module i2c-i801: support Intel 82801BA (815E chipset)
1284  Module i2c-i801: add i2c block write support, fix smbus block bugs
1285                   (requires i2c 2.5.3 package)
1286  Module i2c-i810: support Intel 82815
1287  Module lm87: new
1288  Module sensors: Fix for kernel 2.4.0-test8
1289                  (remove copy_to_user_ret and put_user_ret)
1290  Module w83781d: limit fan divisors to 8 max. for as99127f
1291  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1292  Program i2cdump: Add smbus block read support
1293  Programs i2cdetect, i2cdump: Improve error reporting
1294  Program sensors: new switch -u (--unknown)
1295  Program sensors-detect: detect Intel 82801BA (815E chipset)
1296  Program sensors-detect: detect Intel 82815
1297  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1298  Program sensors-detect: detect National LM87
1299  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1300  Program sensors-detect: Improve error reporting
1301
13022.5.2 (20000709)
1303  File sensors.conf.eg: Fix lm80 in8 calculation
1304  Module w83781d: W83783S no longer crashes on unloading
1305  Program sensors-detect: more robustness in case of unknown i2c adapters
1306  Program sensors-detect, libsensors: fix eeprom size reporting
1307  Program sensord: more flexibility, support for alarm scanning etc.
1308  Program sensors: support for ignore setting on sensor alarms.
1309  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1310
13112.5.1 (20000618)
1312  Library: Add adm1025 support
1313  Module adm1025: new
1314  Module ddcmon: Fixed bus scan which could hang SMBus
1315  Module i2c-keywest: new
1316  Module maxilife: Add support for Maxilife '99 (NBA)
1317  Module via686a: Enable sensors if not enabled by BIOS
1318  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1319  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1320  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1321  Module w83781d: Fis as99127f fan speed (was 66% too high)
1322  Module w83781d: Improve beep input checking
1323  Program i2cdump: Add Winbond-style bank selection
1324  Program isadump: Add Winbond-style bank selection
1325  Program sensors: Add adm1025 support.
1326  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1327  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1328  File sensors.conf.eg: Add Maxilife '99 entries
1329  File sensors.conf.eg: Remove some as99127f entries.
1330    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1331          won't reinstall it) or else 'sensors -s' will fail.
1332
13332.5.0 (20000312)
1334  Dropped all kernel 2.0 and 2.1 compatibility
1335  Module i2c-i810: new
1336  Module ddcmon: new
1337  Module via686a: new
1338  Module i2c-amd756: fixed region request
1339  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1340  Module w83781d: Don't change pin settings at initialization;
1341                  also fix chip detection.
1342  Library: Support for ddcmon and via686a
1343  Program sensors-detect: Support for ddcmon and via686a
1344  Program sensors: Support for eeprom, ddcmon and via686a
1345
13462.4.5 (20000116)
1347  Introduced DESTDIR installation prefix
1348  Module lm80: fixes, temperature now read and set correctly
1349  Module i2c-voodoo3: driver enhancements
1350  Module w83781d: fixes, AS99127 works much better now
1351  Library: New ignore keyword in config file
1352  Programs: Support for new ignore keyword
1353  Program sensors-detect: Support for MGA detections
1354
13552.4.4 (19991201)
1356  Addition of the alpha release of AMD 756 SMBus host support.
1357  Many fixes and updates to the gl518sm driver
1358  Updates and fixes for device detection
1359
13602.4.0 (19990920)
1361  Too much to list.
1362  i2c and smbus parts are split off to a separate i2c package.
1363  New drivers and other stuff.
1364
13652.3.4 (19990616)
1366  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1367  All: Now compiles against kernel 2.0.x (again ;)
1368  Module gl518sm: some updates and refinements
1369
13702.3.3 (19990603)
1371  All: Now compiles against kernel 2.3.x (x >= 1)
1372  Module i2c-voodoo3: Timing issue fixes
1373  Module bt869: Seems to be functional and relatively well tested
1374  Many modules were modified to be more compatible with the new
1375   Mutex structure in the new experimental kernels.
1376
13772.3.2 (19990507)
1378  Module i2c-hydra: Now compiles on 2.0.x kernels
1379  Module i2c-lm75: Slightly better detection
1380  * New, but not compiled by default:
1381  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1382  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1383
13842.3.1 (19990501)
1385  All: Now compiles on PPC
1386  Module i2c-hydra: NEW
1387  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1388  Module w83781d: Removed deadlock (mutex was not initialized)
1389  Documentation: A few glitches removed
1390  Makefile: default module installation directory is now
1391            /lib/modules/current/extra/misc
1392  Program sensors-detect: PPC Hydra now detected
1393  Program sensors: Now prints complete GL518SM information
1394  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1395
13962.3.0 (19990422)
1397  All: Many, many changes and improvements
1398  All: Many small bugs and problems removed
1399  Modules: New insmod parameters
1400  Modules: Much improved chip detection
1401  Module maxilife: NEW
1402  Module adm1021: MAX1617A now also supported
1403  Module adm9240: DS1780 now also supported
1404  Module w83781d: W83782D and W83783S now also supported
1405  Program sensors-detect: NEW
1406  Library: All chips now supported
1407  Documentation: Very much improved
1408
14092.2.2 (199903??)
1410  Just some minor updates and bug fixes.
1411
14122.2.1 (19990218)
1413  All: Removed compile warnings
1414  Module i2c-dev: Small bug removed if DEBUG=1 was used
1415  Module sis5595: Now compiles for 2.0 kernels
1416  Module adm1021: Detection corrected
1417
14182.2.0 (19990216)
1419  All: Set copyrights to include 1999
1420  All: Small bugfixes
1421  I2C: Upgraded to newest archive of Simon Vogl
1422  Module i2c-dev: NEW
1423  Module i2c-ali15x3: NEW
1424  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1425     directories, and somewhat improved
1426  Module sis5595: NEW
1427  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1428  Library: Support for new chip drivers, several small bugs fixed
1429  Library manual pages: NEW
1430  Program i2cdetect: Moved to detect directory
1431  Program detect.pl: NEW
1432  Program doc-features: NEW
1433  Program sensors: Added man-page
1434  Document BUGS: Added cdrom bug and kernel i2c conflict
1435
14362.1.2 (19990116)
1437  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1438  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1439  Documentation in doc/kernel: NEW
1440
14412.1.1 (19990107)
1442  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1443                     and older
1444  Module gl518sm.o: Miscelaneous bugs and problems solved
1445  Program isadump: NEW
1446
14472.1.0 (19981230)
1448  Library: Completely NEW
1449  Program sensors: NEW
1450  Program grab_busses: NEW
1451  Program decode-dimms: More information
1452  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1453  Module w83781d.o: NEW
1454  Module lm80.o: NEW
1455  Module gl518sm.o: new procfile beep, several small updates
1456  Modules: Now use pin readings, no more scaling within the kernel (use the
1457           library instead)
1458
14592.0.2 (19981214)
1460  Module eeprom.o: NEW
1461  Program decode-dimms: NEW
1462  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1463           2.1.58
1464  Modules: Somewhat less verbose on transfers
1465  Module lm78.o now recognizes and handles lm78-j and lm79
1466
14672.0.1 (1998121?)
1468  Module gl518sm.o updates, to make it actually work
1469  Module lm75.o high/low-byte swapping write bug fixed
1470
14712.0.0 (19981209)
1472  Initial release
Note: See TracBrowser for help on using the browser.