Context Navigation

CHANGES @ 2924

Revision 2924, 59.2 KB (checked in by mmh, 8 years ago)

Patch by David Knierim <david_knierim@…> to fix IN10

(+5V) scaling

I have been hunting down an issue related to the IN10 input of the
LM93. I have observed that there is a rather large error between the
actual voltage and the voltage level displayed by sensors(1) (~ .12V).

Please find attached a small patch that fixes this problem. The data
sheet is very ambiguous and I and another engineer made the same mistake
calculating the voltage per DAC step the first time we read the spec sheet.

The confusion stems from an entry in the "maximum voltage" column that
is higher than the value in the "absolute maximum range" column. For 5V
only, the value in the "register reading at maximum voltage" is for the
voltage in the "absolute maximum range", NOT the "maximum voltage". Whew!

Property svn:eol-style set to native
Property svn:keywords set to Author Date Id Revision

Line
1	lm_sensors CHANGES file
2	-----------------------
3	This is a list of the most important changes in 2.x versions. It is by
4	no means complete, listing only the most significant changes.
5	The ultimate way to know what has changed is to run diff, or even neater,
6	ask CVS about it:
7
8	* Checkout the archive (see doc/cvs for how you can do this)
9	* Determine which tags are valid, by running this command from the
10	project root directory:
11	cvs status -v -l Makefile
12	Valid tags are usually of the form V2-1-0 for version 2.1.0
13	* Ask cvs for the difference between two versions:
14	cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15	for example:
16	cvs diff -r V2-0-0 -r V2-0-1 -u
17
18	-----------------------------------------------------------------------------
19
20	2.9.1 (2005????)
21	File doc/chips/mic74: New
22	Library: Add support for 2.6 fscpos driver (Stefan Ott)
23	Fix sis5595 in4 (Aurelien Jarno)
24	Add support for 2.6 gl520sm driver (Maarten Deprez)
25	Add support for 2.6 bmcsensors driver (Yani Ioannou)
26	Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
27	Module bmcsensors: Fix compile error
28	Module ds1621: Fix detection (Aurelien Jarno)
29	Module eeprom: Discard SPD-centric checksum module parameter
30	Cleanup detection function (backport from Linux 2.6)
31	Module i2c-i801: Temporarily disable broken I2C block read
32	Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
33	Gelato)
34	Module it87: Improve Super-I/O detection
35	Limit I2C address range
36	Support VID on the IT8712F
37	Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
38	Module lm93: Fix IN10 (+5V) scaling
39	Module mic74: New
40	Module w83781d: Revert AS99127F temp2 and temp3 computation change
41	Skip final initialization step for AS99127F chips
42	Module w83627hf: Support secondary Super-I/O address
43	Enable temp2 and temp3 if they are disabled
44	Program ddcmon: New; user-space replacement for the ddcmon driver
45	Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
46	Program isadump: Handle Super-I/O keys
47	Program lm_sensors.init: Cleanups (Axel Thimm)
48	Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
49	Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
50	Don't complain about read-only enable files (lm85)
51	Program sensord: Fix erroneous error message (Aurelien Jarno)
52	Support sis5595 in4 (Aurelien Jarno)
53	Support w83627thf.
54	Program sensors: Display sis5595 in4 (Aurelien Jarno)
55	No errors on missing pc87360 fans
56	Add gl520sm support (Maarten Deprez)
57	Improve vt1211 error/ignore handling (Michael Carland)
58	Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
59	Improve IT8705F and IT8712F detection
60	Improve udev detection
61	Fix DS1621 detection
62	Add W83627EHF detection
63	Add ATI SMBus detection
64
65	2.9.0 (20041228)
66	NOTE: Requires i2c-2.9.0 or newer!
67	File README.thinkpad: Update
68	File doc/chips/it87: Cleanups
69	File doc/chips/lm63: New
70	File etc/sensors.conf.eg: Set via686a voltage limits
71	File kernel/chips/Module.mk: Resync module list with mkpatch
72	File kernel/include/sensors_compat.h: Define __devexit_p if missing
73	(kernels 2.4.16 and older)
74	Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
75	and dec_use removed in release 2.8.0
76	Modules (all chip drivers): Remove owner from i2c_driver; pass
77	controlling_mod to i2c_register_entry() again
78	Module bmcsensors: Support function 1/x
79	Module i2c-amd756: Display the real bus name
80	Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
81	Module i2c-i801: Support i2c block read (ICH5 and higher)
82	Add PEC support for ICH6
83	Add support for ICH7
84	Module i2c-ipmb: Remove from build since it doesn't work
85	Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
86	Module icspll: Fix compilation
87	Module lm63: New driver for the National Semiconductor LM63
88	Module lm83: Use signed types for temperatures
89	Check limits on register writes
90	Module lm87: Round voltages properly
91	Retry on read errors (David Knierim)
92	Less agressive init (no reset)
93	Module lm90: Use signed types for temperatures
94	Check limits on register writes
95	Module lm93: Added module parameter for VID pin input thresholds.
96	Fix typo in dynamic VID alarms
97	Adds a couple log messages for failed transactions (David
98	Knierim)
99	Fix compilation breaking C99-ism (Axel Thimm)
100	Fix block read retries
101	Module pc87360: Support secondary Super-I/O address
102	Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
103	Library: Add lm63 support
104	Add lpc47b397 support
105	Programs *.init: Rename lockfile to match file name
106	Programs i2cset, isaset: Written byte/word can be masked
107	Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
108	Program mkpatch: Include i2c-amd756-s4882
109	Program pwmconfig: Handle new (well, back to old) pwm files names for
110	Linux 2.6.10 and up
111	Program sensord: Do not scale load average (Aurelien Jarno)
112	Program sensors: Add lm63, lpc47b397 support
113	Support DDR2 memory module EEPROMs (Rudolf Marek)
114	Support only one location for the default configuration file
115	Display the default configuration file location in --help
116	Simplify the configuration file opening code
117	Program sensors-detect: Improve LM63 detection
118	Discard IBM Thinkpad detection code
119	Add PCA9556, LPC47B397, ICH7 detection
120	Fix W83792D detection, add W83791SD detection
121
122
123	2.8.8 (20041007)
124	File doc/donations: Update
125	File doc/lm_sensors-FAQ.texi: Add 4.6.1
126	Update 4.7
127	File doc/chips/gl518sm: Update "iterate" info
128	File doc/chips/it87: Discard outdated module parameters
129	File doc/chips/lm75: LM77 is not supported
130	File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
131	File doc/chips/lm93: New
132	File doc/chips/w83l785ts: Improvements
133	File etc/sensors.conf.eg: Fix it87 lines order
134	Update lm87 section
135	File kernel/include/sensors_vid.h: Support VRM 10.0
136	Library: Support 2.6 adm1025
137	Preliminary support for 2.6 lm87
138	Support 2.6 adm9240
139	Allow an alternative sysfs file name for chip features (2.6)
140	Fix lm83 critical limits (2.6)
141	Add lm93 support
142	Prevent some procfs errors from being silently ignored
143	Makefiles: Implement user_uninstall (Rudolf Marek)
144	Spoof LOGNAME and HOSTNAME when making html man pages
145	Module adm1025: Refine detection
146	Update limit registers again (revert of 2.8.1)
147	Init high limits if they read 0
148	Fix conversions
149	Module lm75: Refine detection
150	Module lm78: Fix init
151	Module lm83: Default to kind lm83 if forced.
152	Fix temperature macros.
153	Module lm90: Add LM86, MAX6657 and MAX6658 support
154	Module lm93: New
155	Module mtp008: Fix the setting of limits on temp2
156	Module pca9540: Refine detection
157	Module pc87360: Change voltage/thermistor magnitude from 2 to 3
158	Support VID
159	Fix fan_div file when fan count is less than 3
160	Additional init and debug
161	Module smsc47m1: Fix pwm_enable being inverted
162	Module w83627hf: Add alternate VCORE/in0 calculation method
163	Remove reset of chip by driver on initialization
164	Module w83781d: Fix default VRM for w83791d
165	Module w83l785ts: Implement read error handling (backport from 2.6)
166	Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
167	Wait for user input to continue (as opposed to 5 sec
168	delay), can be skipped with -y
169	Various cleanups and code refactoring
170	Update manual pages
171	Program fancontrol.init: New (Dean Takemori)
172	Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
173	Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
174	(Giuseppe Della Bianca)
175	Program mkdev.sh: Detect devfs and refuse to run
176	Use mknod's mode instead of chmod
177	Program mkpatch: Include xeontemp and pc87360
178	Program sensors: Rework adm1025 support
179	Display pc87365/pc87366 VID
180	Improve smsc47m1 support
181	Hide 2.6 adm1027 alarm_mask being missing
182	Print VRM version for all supported chips
183	Program sensors-detect: Support LM93, LM77, LM63
184	Support PC8739x Super-I/O family (no sensors)
185	Fix PCA9540 support
186	Refine ADM1025/ADM1025A detection
187	Refine LM75 detection
188	Ignore missing /proc/modules (Andras Bali)
189	Script-wide Perl cleanups
190	Support udev
191	Support W83792D, LM96000
192
193
194	2.8.7 (20040611)
195	File README.thinkpad: Update 24RF08 status
196	File doc/fan-divisors: More info on accuracy
197	File doc/lm_sensors-FAQ.texi: Update 4.27
198	File doc/chips/adm1031: New
199	File doc/chips/max1619: New
200	File doc/chips/pc87360-fan: Renamed to pc87360
201	File doc/chips/pc87360: Big update
202	File doc/chips/w83781d: Update AS99127F documentation
203	File etc/sensors.conf.eg: Add comments about BP6 voltages
204	Add comment on Asus A7V8X-X VCore
205	Misc fixes to lm80 section
206	Update via686a section
207	New lm99 section
208	Add section for LM85-like chips
209	Preliminary pc87366 section
210	Add comment on GL520SM application modes
211	Document beep_enable (Aurelien Jarno)
212	Preliminary max1619 section
213	Preliminary adm1030 and adm1031 sections
214	Library: Fix 2.6 VRM
215	Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
216	Fully support the PC87360 family
217	Support the lm99
218	Add version and date strings
219	Support 2.6 max1619
220	Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
221	Man page i2cdetect.8: document new command line flags
222	Man page i2cdump.8: More details on how i2cdump can write to a chip
223	Modules (all chip drivers): Rework memory allocation scheme.
224	Module adm1031: New (Alexandre d'Alton)
225	Module bmcsensors: Fix oops by creating thread for initialization
226	Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
227	Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
228	asb100.c, lm92.c: Use swab16
229	Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
230	Module gl520sm: Less agressive initialization process
231	Fix temp1 limits being unsettable in application
232	Ensure that temp2 and in4 are not used at the same time
233	Module i2c-i801: Support 6300ESB and ICH6
234	Module i2c-piix4: Don't blacklist IBM with Serverworks chip
235	Module i2c-sis645: Add support for SiS655
236	Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
237	Module lm90: Support LM99 and LM89
238	Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
239	Get rid of useless i2c_probe call
240	Module max1619: New (Alexey Fisher)
241	Module p4b_smbus: Add support for mobile versions of the 82801
242	(Axel Thimm)
243	Module pc87360-fan: Renamed to pc87360
244	Module pc87360: Also support PC87365 and PC87366
245	Add write support
246	Correctly set the chip name depending on the type
247	Add voltage and temperature support
248	Fix fan speed computation
249	Retrieve fans configuration from Super-I/O space
250	Export pwm_enable (read-only)
251	Honor pwm invert bits
252	Clear fan alarms after we read them
253	Do not read fan data when monitoring is disabled
254	Do not include SENSORS_INSMOD stuff
255	New module parameter: init
256	Fan clock dividers change automatically
257	Add thermistor dupport
258	Module smsc47m1: Lock on reads and writes
259	Various PWM fixes
260	Module thmc50: Fix address range
261	Module via686a: Fix voltage roundings
262	Simplify temperature conversions
263	Module w83781d: Drop PWM support for as99127f
264	Invert AS99127F beep bits in driver rather than user-space
265	Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
266	Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
267	Program fancontrol.pl: New
268	Program i2cdetect: Adapt probing method to address
269	Add -q and -r flags to force probing methods
270	Allow probing range selection
271	Program isadump: Major improvements
272	Program isaset: New
273	Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
274	module
275	Include i2c-nforce2
276	Program sensord: New --rrd-no-average parameter
277	Syncronize time slots with rrd
278	Fix W83781D temp3 alarm (Aurelien Jarno)
279	Add ASB100 support (Andrew May)
280	Program sensors: Fully support the PC87360 family
281	Fix lm80 temperature alarms
282	Support the lm99
283	Do not invert AS99127F beep bits anymore
284	Fix W83781D temp3 alarm (Aurelien Jarno)
285	Print library version string
286	Program sensors-detect: Rework Super I/O detection
287	Support SiS655/SiS96x
288	Support ADT7461 and ADT7467
289	Better support for ADM1027, ADT7460 and ADT7463
290	Explicitly support ADM1028
291	Scan all logical devices of PC87365 and PC87366
292	Detect LM92, LM76, MAX6633, MAX6634, MAX6635
293	Detect eeproms with software write protect (not
294	enabled by default)
295	Support ALi 1563 (2.6 only)
296	Drop LTC1710 support
297	Use byte reads for probing on ranges 0x30-0x37 and
298	0x50-0x5F
299	Improve LM89 and LM99 support
300	Support GeForce FX 5900 video cards
301	Fix devfs misdetection (Aurelien Jarno)
302	Detect 6300ESB, ICH6
303	Fix double detection of ISA chips
304	Support MAX1619
305	Support PC87373 Super-I/O
306	Fix unknown adapters appearing multiple times
307	Refine MAX6650/MAX6651 detection
308
309
310	2.8.6 (20040405)
311	File README.thinkpad: Update status
312	File doc/chips/pca9540: New
313	File doc/chips/pc87360-fan: New
314	File etc/sensors.conf.eg: Update pcf8591 default configuration
315	Library: Switch to new sysfs naming standard
316	Fix gcc 3.3 warnings (Philipp Thomas)
317	Support 2.6 ds1621 and pcf8591
318	Change pcf8591 magnitudes
319	Support pc87360-fan
320	Makefile: Install shared library 755
321	Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
322	Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
323	Modules ds1621, pcf8591: Check for capabilities before using them
324	(Aurelien Jarno)
325	Modules pcf8574, pcf8591: Cleanups
326	Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
327	Module adm1021: Better detection and initialization
328	Module pca9540: New driver for the Philips PCA9540
329	Module pc87360-fan: New driver for the National Semiconductor PC87360,
330	PC87363 and PC87364 Super I/O chips
331	Module smsc47m1: Support the LPC47B27x
332	Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
333	Program i2cdetect: Skip special addresses by default
334	Program sensord: Prevent null pointer dereference (Tim Toohey)
335	Program sensors: Print the degree symbol in the terminal's current locale
336	(Aurelien Jarno)
337	Update pcf8591 print to support 2.6 driver
338	Support pc87360-fan
339	Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
340	Improved SiS chips support
341	Add a white list of IBM systems
342	Drop support of undetectable adapters
343	Fix smart battery detection
344	Add smart battery charger and manager detection
345	Rework adm1021 and clones detection
346	The PC87360, PC87363 and PC87364 Super I/O chips
347	now have a (preliminary) driver
348	Rework Super I/O detection
349	Better support of devfs
350	Program sensors-detect-stat.pl: New
351
352
353	2.8.5 (20040305)
354	File doc/chips/SUMMARY: Update
355	File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
356	Makefiles hotplug and rrd: Remove -o and -g arguments to install
357	Module bmcsensors: Increase max SDRs to 100
358	Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
359	Module i2c-amd756: Don't register driver to avoid driver conflicts.
360	(Daniel Rune Jensen)
361	Module it87: Better temperature sensor types handling (Takeru Komoriya)
362	Fix reset=1 (Takeru Komoriya)
363	Module lm80: Code cleanups
364	Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
365	Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
366	Module w83627hf: Add w83637hf support
367	Fix exported name
368	Fix PWM in w83627thf
369	Preserve other bits when forcing temp2/3 to comparator mode
370	Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
371	Remove asb100 support
372	Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
373	Define driver ID if i2c-id.h doesn't have it yet.
374	Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
375	Backport oops fix from Linux 2.6.
376	Modules (all chips): Get rid of useless headers
377	Program decode-edid.pl: Add sysfs support
378	Program sensors: Add w83637hf support
379	Add support for Shuttle Ethernet EEPROMs
380	Drop 2.6 subclient detection
381	Program sensors-detect: Add heuristics to the LM80 detection function
382	Add support for W83L785R, improve W83L784R/AR
383	Add GeForce FX 5600 as supported by rivatv
384	More Super IO chips, better handling
385	Library: Update to match renames in fscher
386	Reverse temporary changes to w83l785ts mappings
387	Fix vt1211 and vt8231 uch_config not being writable
388	Add 2.6 lm80 support
389	Add w83637hf support
390	Remove in6 and temp1 from vt1211 and vt8231
391	Add support for Shuttle Ethernet EEPROMs
392	Remove unused as99127f features
393
394
395	2.8.4 (20040207)
396	File doc/lm_sensors-FAQ.texi: Update 4.20.
397	File doc/chips/it87: Change hyst to low
398	File doc/chips/w83l785ts: New
399	File etc/sensors.conf.eg: Change it87 hyst to low
400	Fix w83697hf supposed to have temp3
401	Limits initialization for adm1025/ne1619
402	Handle fscher voltage conversions
403	Add Tyan Trinity S2495 KT400 setup (Eric
404	Schumann)
405	Fix fscher fan labels (Reinhard Nissl)
406	Library: Better 2.6 eeprom support
407	Change it87 hyst to low
408	Add 2.6 gl518sm, fscher support
409	Fix 2.6 negative voltages handling
410	Temporary fix to w83l785ts mappings
411	Module adm1025: Separate prefix for NE1619
412	Module adm1026: Remove use of temporary ID
413	Define addresses as a range
414	Module bmcsensors: Fix reservations
415	Module fscher: Externalize voltage conversions
416	Module eeprom: Remove memtype
417	Module i2c-piix4: Fix resource release error
418	Various cleanups
419	Program decode-vaio.pl: Add sysfs support
420	Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
421	Drop linux 2.2 support
422	Add w83627hf
423	Program sensors: Do not show algorithm by default
424	Cleanup temperature unit display code
425	Cleanup label spacing code
426	Fix output to UTF-8 terms (Marcel Sebek)
427	Simplify gl518sm print
428	Do not ignore errors in FSC chips prints
429	Fix w83l785ts print
430	Cleanup FSC chips prints
431	Program sensors-detect: Fix PATH issues
432	Correctly point to the fscher driver
433
434
435	2.8.3 (20040115)
436	File lm_sensors.spec: Update
437	Library: Add 2.6 eeprom, lm90 support
438	Fix 2.6 temp_hystX for 2.6.1-rc1 and later
439	Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
440	Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
441	Module i2c-amd756: Fix byte writes
442	Module i2c-tsunami: Cleanups (Daniel Nilsson)
443	Module it87: Fix sg_tlx writes; fix sensor type reporting;
444	add 8712 Super I/O detection;
445	remove initialization of temp_type and fan_ctl;
446	remove init and temp_type module parameters
447	Module lm90: Handle hysteresis differently
448	Module smartbatt: Fix detection, magnitudes, temp
449	Module w83781d: Fix negative voltages
450	Module w83l785ts: New
451	Program eeprog: Make 8 bit mode the default
452	Program fancontrol: Improvements, fixes, support 2.6 kernels
453	Program mkpatch: Add lm75.h
454	Program pwmconfig: Improvements, fixes, support 2.6 kernels
455	Program sensors: Add ASB100 support
456	Program sensors-detect: Add 8712 Super I/O detection;
457	add W83L785TS detection
458
459
460	2.8.2 (20031211)
461	IMPORTANT: Limit initialization removed from all chip drivers!
462	If you didn't run 'sensors -s' in the past you may need to now!
463	File sensors.conf.eg: Change lm75 scaling back to 1;
464	Add example for asb100
465	Library: Fix bmcsensors scaling, increase number of sensors;
466	Add w83627thf support; Advance version to 3.0.0;
467	Add hermes, ADM1032, ASB100 support;
468	Add it87 sensor type support;
469	Add sysfs support for kernel 2.6;
470	Fix memory leaks
471	Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
472	Fail if no kernel .config file exists;
473	Don't build module dependencies for user and user_install
474	Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
475	it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
476	smsc47m1, thmc50, via686a, w83627hf, w83781d:
477	Remove initialization of limits by driver.
478	Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
479	Modules (chip): Init cleanups
480	Module asb100: New
481	Module bmcsensors: Fix voltage scaling, voltage and fan limits
482	Modules ddcmon, eeprom: Add failure printks
483	Module fscher: New (Fujitsu-Siemens Hermes driver)
484	Module i2c-amd756: Fix AMD8111 support
485	Module i2c-amd8111: Fix byte writes
486	Module i2c-nforce2: Fix byte writes
487	Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
488	Module i2c-sis630: Sync with 2.6.0-X driver version
489	Module i2c-viapro: Add support for Via 8237
490	Module it87: Add pwm and "smart guardian" support;
491	add it87 sensor type support
492	Module lm75: Fix negative voltages
493	Module lm90: Add ADM1032 support
494	Module w83781d: Fix 791d and 627hf detection
495	Module w83627hf: Add VID support
496	Program dmidecode: Remove (sensors-detect doesn't need it anymore)
497	Program eeprog: New
498	Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
499	support sysfs for i2c bus search
500	Program i2cdetect: Add -l option to list busses
501	Program i2cdump: Add 'c' mode for consective address reads
502	Program mkpatch: Cleanups
503	Program pwmconfig: Handle multiple fans controlled by a single pwm
504	Program sensord: Remove ddcmon support
505	Program sensors: Add ADM1032 support; add messages for sysfs
506	Program sensors-detect: Prefer Super I/O drivers;
507	Fix W83627HF and W83791D detection; detect CSB6;
508	Detect ADM1029, ADM1030, ADM1031;
509	Detect W83637HF, W83697UF;
510	Add it87 sensor type support; add sysfs support
511	Reduce lm80 misdetects; remove PCFxxxx "detection"
512	Detect VT8237 (KT600)
513	Use VPD instead of DMI+ACPI for Thinkpad detection
514	Suggest new asb100 driver instead of w83781d
515
516
517	2.8.1 (20031005)
518	NOTE: Requires i2c-2.8.1 or newer!
519	File sensors.conf.eg: Improved adm1025 section
520	Default temp labels for as99127f
521	Improved lm83 section
522	Better support for Asus A7V8X-X
523	File doc/chips/SUMMARY: Add SMSC manufacturer ID
524	File doc/chips/adm1025: Add decent documentation (almost new)
525	File doc/chips/lm83: Known motherboards list update, misc updates
526	Library: Change adm1025 names (hyst/over become low/high)
527	Swap adm1025 temp1 and temp2 to match the driver's order
528	Advance version to 2.0.1
529	Update lm83 support
530	Add support for lm90, xeontemp, max6650
531	Add separate messages for read and write errors
532	Add missing message for parse error
533	Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
534	Modules (various): Fix includes for compilation on Alpha
535	Use the new i2c_delay function instead of the various
536	do_pause functions
537	Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
538	Module i2c-nforce2: Cleanups
539	Module i2c-i810: Use readl/writel for portable access to PCI memory
540	Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
541	Module i2c-savage4: Use readl/writel for portable access to PCI memory
542	Module i2c-sis630: Fix detection
543	Add block data read/write support
544	Module i2c-sis645: Detection method change/bugfix
545	Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
546	Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
547	Module adm1025: Major driver update
548	Add support for Philips NE1619
549	Simplify the driver a lot (unified voltages, unified
550	temperatures and much more)
551	Fix default voltage limits
552	Change default temperature limits
553	Swap remote and local temperatures to match the internal
554	registers order (make the code unification possible)
555	Export remote diode fault through alarms
556	Module ddcmon: Major update
557	Add half a dozen new features
558	Add checksum parameter (same as for the eeprom module)
559	Fix monitor limits
560	Module eeprom: Ignore Sony Vaio EEPROMs with a password set
561	Module lm78: Fix a fan_div/fan_min bug
562	Module lm83: Add t_crit and alarms support
563	Module lm90: New
564	Module max6650: New
565	Module saa1064: New
566	Module smsc47m1: Add support for 47M142
567	Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
568	enhance w83627thf support
569	Module w83781d: Enhance chip detection; clean up error returns;
570	fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
571	Module xeontemp: New
572	Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
573	Mark Rambus as unsupported
574	Program decode-edid.pl: New
575	Interfaces between our eeprom module and
576	parse-edid from the read-edid project
577	Program p4b_smbus: Fix SMP compilation
578	Program sensord: Add support for IT87 (Mike Black)
579	Change ADM1025 support to match the changes made to
580	the library
581	Program sensors: Rewrite and enhance EEPROM support
582	Change LM83 and ADM1025 support to match the changes
583	made to the library
584	Add DRDRAM support to print_eeprom
585	Exit(1) on /proc write failure (Malte Starostik)
586	Add LM90, MAX6650 support
587	Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
588	Add support for LM82, LM86, LM89
589	Improved W83781D family detection
590	Add support for AS19927F rev.2, ASB100 Bach
591	Add support for Asus Mozart-2 (3 types)
592	Add support for NE1619
593	Add support for FSC Hermes
594	Make sure /sbin is in the user's path
595	Fix EEPROM detection
596	Automatic module.conf and /dev/i2c* detection
597	Improve LM82 and LM83 detection
598	Handle "to-be-written" cleanly
599	Add detection for 47M14x Super I/O
600	Handle the one-address-many-chips-same-driver
601	case
602
603
604	2.8.0 (20030714)
605	NOTE: Requires i2c-2.8.0 or newer!!!
606	Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
607	2.4.13 or later required for mkpatch.
608	File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
609	i2c package
610	File doc/chips/fscscy: Add watchdog documentation
611	File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
612	File sensors.h: Now automatically generated
613	Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
614	add adm1026, lm83, lm85, w83791d support;
615	Advance version to 2.0.0
616	Makefiles: Generate warnings if new library won't be found by ld.so;
617	Modules now install in kernel/drivers/i2c/[busses,chips];
618	Ensure that headers in /usr/local/include are used first;
619	Don't use /usr/include headers for modules;
620	Handle multiple UTS_RELEASE definitions in linux/version.h;
621	Automatically generate kernel/include/sensors.h;
622	Remove old gzipped modules; remove old misc directory if empty;
623	Remove pre-2.4 installation method;
624	-Wall now the default;
625	Add new targets user, user_install, and help;
626	Run depmod after module installation
627	Modules (all): Cleanups including
628	- Add #include <i2c-proc.h>
629	- C99 initializers
630	- Remove #ifdef MODULE
631	- Remove #ifndef THIS_MODULE
632	- Remove #ifndef MODULE_LICENSE
633	- Remove other 2.1/2.2 #ifdefs
634	- Remove #include "sensors.h", copy SYSCTL defs to module
635	- Remove excess #includes
636	- Remove argument in i2c_register_entry()
637	- Remove dummy xxx_command() definition
638	- Remove EXPORT_NO_SYMBOLS
639	- Remove init_MUTEX #define
640	- Remove xxx_inc_use() and xxx_dec_use() functions; modules
641	no longer adjust their own refcounts
642	- Use module_init() and module_exit()
643	- Update to new i2c_driver struct definition
644	Modules (bus PCI): Convert to PCI-module-style initialization
645	Modules (several): Add support for AMD Opteron VRM (VID) encoding
646	Module adm1021: Set alarm on failed reads and report old value;
647	merge changes from kernel 2.5.54
648	Module adm1026: New
649	Module bmcsensors: Fix compile when DEBUG=1
650	Modules ddcmon, eeprom: Use i2c block reads if possible;
651	better error handling
652	Module ds1307: Add to Makefile
653	Module gl520sm: Fix temperature over/hyst writes
654	Module lm75: merge changes from kernel 2.5.54
655	Module lm83: New
656	Module lm85: New
657	Module i2c-ali1535: Check for invalid transaction
658	Module i2c-ali15x3: Check for invalid transaction
659	Module i2c-amd756: merge changes from kernel 2.5.54;
660	check for invalid transaction
661	Module i2c-amd8111: merge changes from kernel 2.5.54
662	Module i2c-i801: Add support for 82801EB (ICH5)
663	Module i2c-i810: Fix for some chips
664	Module i2c-nforce2: New
665	Module i2c-piix4: Check for invalid transaction
666	Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
667	Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
668	north bridges; SiS962 and SiS963 south bridges
669	Module i2c-viapro: Check for invalid transaction
670	Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
671	pwm and pwm enable support; update docs
672	Module smbus-arp: Check adapter for HW or SW PEC support;
673	add reset option
674	Module w83781d: Add support for w83791d
675	Module w83627hf: New
676	Program decode-dimms.pl: Recognize DDR and Rambus
677	Program eeprom: Fix writes for small eeproms
678	Program eeprom, eepromer: Use local i2c-dev.h for build
679	Program fancontrol: New
680	Program lm_sensors.init: Call sensors -s in start()
681	Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
682	Add adm1026,lm85 support;
683	Remove sensors.c file; add sensors_compat.h;
684	Remove patches to i2c-core.c and drivers/char/mem.c;
685	Now works only for kernels 2.4.13 or later
686	Program p4b_smbus: Fix 'make install';
687	Install in same place as other modules;
688	Clear correct bits in config word
689	Program pwmconfig: New
690	Program sensors: add adm1026, lm85, w83791d support
691	Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
692	w83627hf, w83627thf, w83697hf);
693	Add support for SiS651, SiS961, SiS745, SiS746;
694	Support dmidecode 2.0 and later;
695	Fix "C" format error;
696	Add support for adm1026, 82801EB (ICH5), W83791D;
697	Add support for w83l785ts, nForce2;
698	Fix UTF-8 incompatibility;
699	Better support for lm75;
700	Add support for lm83
701
702	2.7.0 (20021208)
703	NOTE: Requires i2c-2.7.0 or newer.
704	File doc/busses/i2c-ali1535: Add license, miscellaneous changes
705	File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
706	File doc/busses/i2c-sis645: Add license
707	File doc/chips/lm92: Add license, features
708	File doc/chips/maxilife: Add license, parameters, features
709	File doc/chips/smartbatt: Complete rewrite
710	File doc/chips/vt8231: Add license, parameters
711	File sensors.conf.eg: Add section for lm75; complete the lm78 section
712	Library: Add support for MC1066; add multiple VRM version support for lm87;
713	enhance adm1023 support; initial support for Sony Vaio eeprom;
714	add support for bmcsensors; add hacks for additional dummy drivers
715	Makefile: Take kernel source location from /lib/modules/x.x.x/build;
716	add flags for x86_64 compiles
717	Module adm1021: Add support for MC1066
718	Module bmcsensors: New
719	Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
720	kernel 2.5.43; fix 2.2 kernel compiles
721	Module gl518sm: Iterate allowed only for rev 0x00
722	Module i2c-amd756: Configure base address for nForce support;
723	check for uninitialized base address;
724	add support for amd8111 (SMBus 1.0)
725	Module i2c-amd8111: New (SMBus 2.0)
726	Module i2c-ipmb: New
727	Module i2c-ipmi: New
728	Module i2c-keywest: Sync with kernel 2.4.20
729	Module i2c-sis630: Add support for SiS730
730	Module i2c-sis645: Improve support for SiS645/961;
731	add support for SiS645DX/961 and SiS735;
732	fix 2.2 kernel compiles
733	Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
734	Module lm87: Add multiple VRM version support
735	Module vt1211: Fix inx limits and alarms; fix in0
736	Module vt8231: Fix inx limits and alarms; fix in0
737	Module w83781d: Fix in0/in1 initialization
738	Module smartbatt: New
739	Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
740	Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
741	stop decoding on checksum error
742	Program dmidecode: Fix read bug; upgrade to version 1.8
743	Program doc-insmod: Complete rewrite; fix author output
744	Program doc-features: Complete rewrite; handle missing sysctl entries;
745	handle unknown prefix with suggestion
746	Program lm_sensors.init: Remove spaces bug; add green/red output
747	Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
748	Program rrd: Add sanity limits to newly-created RRD.
749	Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
750	Program sensors: Add support for MC1066, Rambus Rimms;
751	fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
752	initial support for Sony Vaio eeprom
753	Program sensors-detect: Add support for MC1066, smart battery, 8235,
754	IPMI, AMD8111; add help if no sensors found;
755	add ACPI method for IBM system detection;
756	work with old Perl versions again;
757	initial support for Sony Vaio eeprom
758
759	2.6.5 (20020915)
760	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
761	File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
762	Library: Fix fan3_div writes for w8378* and it87; add vt8231
763	Module dmi_scan: new
764	Module ds1621: Fix enable/disable
765	Module eeprom: Do not corrupt 24RF08's when checksum=1
766	Module i2c-i801: Check for uninitialized base address;
767	enable if not enabled
768	Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
769	Module i2c-sis630: new
770	Module i2c-sis645: new
771	Module lm92: Fix in-kernel initialization
772	Module via686a: Remove VT8231 support
773	Module vt8231: new
774	Module w83781: recognize Asus "ASB100 Bach" as AS99127F
775	Program dmidecode: new
776	Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
777	Program mkpatch: Add Config.in entries for, lm92,
778	pcf8574, pcf8591, smsc47m1, vt1211;
779	add dmi_scan
780	Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
781	Program lm_sensors.init: fix stop()
782	Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
783	add support for logging loadavg in RRD;
784	fix down-converting raw labels for RRD;
785	update chip support, still behind sensors
786	Program sensors: Add /usr/local/etc to config file path;
787	fix -c and -u flags; add vt8231
788	Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
789	refuse to run on IBM systems;
790	fix sysconfig module numbering;
791	change quick write to not corrupt 24RF08's
792
793	2.6.4 (20020719)
794	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
795	File doc/vid: New
796	File include/sensors_vid.h: New
797	File sensors.conf.eg: Add vt1211, smsc47m1
798	Library: Add multiple VRM version support for adm1025, w83781d;
799	fix 'flex scanner jammed' on some systems;
800	add vt1211, smsc47m1, lm92;
801	fix access mode checking
802	Makefiles: For 2.4+ kernels, modules now install in
803	kernel/drivers/[i2c,sensors] , not misc/ , and
804	'make install' removes old versions in misc/ .
805	Use $CFLAGS and $CPPFLAGS if defined.
806	Module adm1025: Add multiple VID version support
807	Module ds1307: new
808	Module i2c-amd756: Add nVidia nForce support; fix block read length;
809	reliability improvements
810	Module i2c-hydra: Flush posted writes
811	Module i2c-i801: Add support for 82801DB (ICH4)
812	Module i2c-i810: Flush posted writes
813	Module i2c-savage4: new
814	Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
815	Module i2c-voodoo3: Flush posted writes
816	Module ds1307: New
817	Module lm92: New
818	Module smbus-arp: new
819	Module smsc47m1: new
820	Module via686a: Add support for VT8231 sensors
821	Module vt1211: new
822	Module w83781d: Add multiple VID version support; fix temp alarms
823	Program eeprom: new
824	Program i2cdump: Add smbus block command specification, add PEC support
825	Program lm_sensors.init: new
826	Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
827	pcf8574, pcf8591, smsc47m1, vt1211
828	Program p4b_smbus: Add support for ICH4
829	Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
830	Program sensord.init: Renamed, was prog/init/sensors
831	Program sensord: Major update, now requires rrd source;
832	not compiled by default
833	Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
834	(don't display algo. and adap.) option;
835	add vt1211, smsc47m1, lm92
836	Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
837	add 82801DB, LM85; fix perl warnings;
838	generate /etc/sysconfig/lm_sensors for
839	lm_sensors.init script
840
841	2.6.3 (20020322)
842	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
843	Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
844	File doc/chips/it87: add more temp_type help
845	File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
846	add adm1021 section; add lm87 AIN[1,2] template;
847	swap negative voltage limits for 782d,783s,627hf,
848	697hf,it87; add more it87 help; swap neg. voltage
849	limits for lm78(-j), lm79, w83781d, as99127f
850	Library: Add PCF8591, W83697HF, ADM1023 support;
851	fix w83* fan_min computes;
852	swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
853	Module adm1024: Add MODULE_LICENSE("GPL")
854	Module bt869: Add s-video out and DVD resolution support
855	Module eeprom: Add support for locations 128-255; rename /proc entries in hex
856	Module fscscy: implement min/max for voltages and fans
857	Module i2c-amd756: Add support for AMD768
858	Module i2c-i810: Add support for 810E
859	Module i2c-keywest: Big update, sync with kernel 2.4.18
860	Module i2c-piix4: Check for uninitialized base address
861	Module i2c-sis5595: Blacklist 645, 735
862	Module i2c-viapro: Check for uninitialized base address
863	Module gl518sm: Standardize /proc entries in0-3
864	Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
865	fan -> fan1; fix temp2 limit writes
866	Module pcf8574: Add support for PCF8574A; /proc interface changed
867	Module pcf8591: new
868	Module sis5595: Blacklist 645, 735
869	Module w83781d: Add W83697HF support; allow force_subclients parameter
870	for Tyan 2460
871	Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
872	Program decode-vaio.pl: new
873	Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
874	add text output
875	Program init/sensors: New SysV init script
876	Program mkpatch.pl: Add support for fscscy, add more help entries
877	Program p4b_smbus: new
878	Program rrd: Install summ_week.cgi
879	Program sensors: Add PCF8591, W83697HF, ADM1023 support,
880	clean up chassis intrusion prints
881	Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
882	fix Via686a and it87 detection;
883	add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
884	fix uninitialized values; it87 beats lm78
885
886	2.6.2 (20011118)
887	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
888	Chip Modules (all): malloc.h -> slab.h
889	Modules (all): Add MODULE_LICENSE("GPL")
890	File doc/FAQ: More updates and additions
891	File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
892	Library: Add fscpos and fscscy support, fix gl520 in4 ID,
893	update it87 alarm ID's.
894	Module fscpos: new (Fujitsu-Siemens Poseidon driver)
895	Module fscscy: new (Fujitsu-Siemens Scylla driver)
896	Module i2c-amd756: Improve busy handling/printk's
897	Module i2c-i801: Add 82801CA/CAM support
898	Module i2c-keywest: Sync with PPC people, it works now
899	Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
900	Module i2c-viapro: Add Via VT8233 support
901	Module it87: Merge alarm_* /proc entries to alarms
902	Module sis5595: Fix support for rev B0
903	Module via686a: Make limit initializations reliable
904	Module w83781d: Allow init=0 parameter to bypass initialization
905	Program isadump: Add flat address space (PCI) support
906	Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
907	fscpos, it87, maxilife, mtp008
908	Program sensors: Fix w83781d temp precision
909	Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
910	Fujitsu Poseidon and Scylla,
911	Intel 82443MX and 82801CA/CAM detection,
912	add ITE 8172G detection (driver in kernel 2.4.10)
913
914	2.6.1 (20010830)
915	File BUGS: Updated
916	File doc/FAQ: More updates and additions
917	File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
918	File sensors.conf.eg: Fix/enhance it87 section
919	Library: ds1621 and it87 updates
920	Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
921	Module i2c-amd756: Add AMD 766 support
922	Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
923	Module i2c-piix4: Add Serverworks CSB5 support
924	Module i2c-sis5595: Recognize unsupported chips and refuse to load
925	Module adm1025: Fixed temp2 min/max writes
926	Module ds1621: Add 12-bit precision mode
927	Module it87: Enable all alarms, add in8 support, add sensor type selection
928	Module sensors: Don't initialize i2c-proc (moved to i2c-core);
929	remove support for module
930	Module sis5595: Recognize unsupported chips and refuse to load
931	Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
932	Program eepromer: new
933	Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
934	of sensors.c as a module in kernel
935	Program sensors: it87 updates; adjust temp. precision for some chips
936	Program sensors-detect: Fix ADM1024 and ADM1025 detection;
937	recognize unsupported SiS chips;
938	recognize AMD 766 and Serverworks CSB5.
939
940	2.6.0 (20010612)
941	NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
942	If your make fails because it can't find <linux/i2c-proc.h>, you
943	forgot this step!!!
944	File doc/FAQ: Many, many updates and additions
945	File doc/busses/i2c-sis5595: new
946	File doc/busses/i2c-tsunami: new
947	File doc/chips/it87: new
948	File doc/chips/via686a: Claim support for 686b.
949	File README.thinkpad: new
950	File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
951	Add lm87, adm9240, ds1780, lm81 templates;
952	Enhance help comments in file;
953	Add Tyan S2510 dual-MTP008 example;
954	Make separate sis5595 section.
955	Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
956	Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
957	Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
958	Add support for maxilife-nba and amd1024;
959	Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
960	Chip Modules (all ISA): Remove #include "i2c-isa.h"
961	Chip Modules (all): Change from sensors_* to i2c_* globals
962	for new i2c-proc.[ch]
963	Makefiles: enhance to support Alpha architecture
964	Module adm1021: Fix lm84 and gl523sm support
965	Module adm1024: new
966	Module i2c-i801: Chip detection cleanup
967	Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
968	Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
969	Module i2c-tsunami: New
970	Module i2c-via: Ensure i2c bus is tristated correctly.
971	Module it87: new driver for IT8705, IT8712, Sis950 chips
972	Module lm78: Recognize chipid=0x20
973	Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
974	Module mtp008: Fix temp initializations;
975	Save BIOS pin configuration of temps and fans;
976	Fix sensor type reads/writes and fan min writes;
977	Fix spurious invalid sensor type messages
978	Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
979	used for patched kernel now.
980	Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
981	Module sis5595: Fix temp, add in4 for chip revision 0xc0;
982	Allow force_addr=0xaddr
983	Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
984	Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
985	reading changes; Add messages for subclient
986	registration failure
987	Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
988	Program i2cset: new
989	Program isadump: fix for Alpha arch. compiles
990	Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
991	Remove ltc1710; Fix i2c_sis5595 typo;
992	Support kernel 2.4.5 makefile change;
993	Add i2c-tsunami; fixed i2c-voodoo3 configuration
994	Program sens_update_rrd: new
995	Program sensord: Add -d (debug) and -p (pid-file) options
996	Program sensors: Change reported version from 1.3 to the lm_sensors version;
997	Fix swapped limit and hysteresis on 9240, 5595, 686a;
998	Change mtp008 temps from max/min to limit/hyst;
999	Add maxilife-nba, adm1024, it87 support.
1000	Program sensors-detect: Recognize lm78 with chipid=0x20;
1001	Recognize SMSC Victory66 South Bridge;
1002	Add devfs /dev/i2c/x support;
1003	Add adm1024, it87xx support; Add thinkpad warning.
1004	Program tellerstats: new
1005
1006	2.5.5 (20010115)
1007	NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1008	you have kernel 2.4.0-prerelease or greater.
1009	Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1010	File doc/developers/proc: new
1011	File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1012	Library: Add ds1621, mtp008 support
1013	Module adm1021: Add support for adm1021a / adm1023
1014	Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1015	Module adm1025: Add support for remote temp; rename /proc entries to
1016	in[0-5] and temp[1-2]; fix negative temp readings
1017	Module adm9240: Rename /proc entries to in[0-5]
1018	Module ddcmon: allow force and force_ddcmon parameters
1019	Module ds1621: new
1020	Module i2c-ali1535: Enhance error checking and recovery; add mutex
1021	Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1022	Module i2c-piix4: add support for ServerWorks southbridge OSB4
1023	Module lm87: cleanup, update voltage calculations
1024	Module mtp008: new
1025	Module pcf8574: change update time to 5 seconds
1026	Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1027	Module w83781d: fix beep setting via /proc
1028	Programs editticket, readticket: new
1029	Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1030	Program mkpatch.pl: more fixes; now adds many more modules
1031	Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1032	add adm1025 temp2; report temp limits correctly as
1033	min/max or limit/hysteresis; print message if no
1034	sensors are found. Removed false errors from lm87 reads.
1035	Program sensors-detect: Add ds1621, mtp008 detection;
1036	add ServerWorks detection
1037
1038	2.5.4 (20001012)
1039	Module i2c-viapro: Add support for Via 596B (0x3051)
1040	Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1041	Program mkpatch.pl: fixed infinite loop
1042	Program sensors-detect: Detect Via 596B (0x3051)
1043
1044	2.5.3 (20001008)
1045	NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1046	File useful_addresses.html: update
1047	Library: Add lm87 support
1048	Module pcf8574: new
1049	Module i2c-ali1535: new
1050	Module i2c-ali15x3: removed force #ifdef.
1051	Module i2c-i801: support Intel 82801BA (815E chipset)
1052	Module i2c-i801: add i2c block write support, fix smbus block bugs
1053	(requires i2c 2.5.3 package)
1054	Module i2c-i810: support Intel 82815
1055	Module lm87: new
1056	Module sensors: Fix for kernel 2.4.0-test8
1057	(remove copy_to_user_ret and put_user_ret)
1058	Module w83781d: limit fan divisors to 8 max. for as99127f
1059	Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1060	Program i2cdump: Add smbus block read support
1061	Programs i2cdetect, i2cdump: Improve error reporting
1062	Program sensors: new switch -u (--unknown)
1063	Program sensors-detect: detect Intel 82801BA (815E chipset)
1064	Program sensors-detect: detect Intel 82815
1065	Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1066	Program sensors-detect: detect National LM87
1067	Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1068	Program sensors-detect: Improve error reporting
1069
1070	2.5.2 (20000709)
1071	File sensors.conf.eg: Fix lm80 in8 calculation
1072	Module w83781d: W83783S no longer crashes on unloading
1073	Program sensors-detect: more robustness in case of unknown i2c adapters
1074	Program sensors-detect, libsensors: fix eeprom size reporting
1075	Program sensord: more flexibility, support for alarm scanning etc.
1076	Program sensors: support for ignore setting on sensor alarms.
1077	Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1078
1079	2.5.1 (20000618)
1080	Library: Add adm1025 support
1081	Module adm1025: new
1082	Module ddcmon: Fixed bus scan which could hang SMBus
1083	Module i2c-keywest: new
1084	Module maxilife: Add support for Maxilife '99 (NBA)
1085	Module via686a: Enable sensors if not enabled by BIOS
1086	Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1087	Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1088	Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1089	Module w83781d: Fis as99127f fan speed (was 66% too high)
1090	Module w83781d: Improve beep input checking
1091	Program i2cdump: Add Winbond-style bank selection
1092	Program isadump: Add Winbond-style bank selection
1093	Program sensors: Add adm1025 support.
1094	Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1095	Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1096	File sensors.conf.eg: Add Maxilife '99 entries
1097	File sensors.conf.eg: Remove some as99127f entries.
1098	Note: For as99127f, reinstall sensors.conf.eg manually (make install
1099	won't reinstall it) or else 'sensors -s' will fail.
1100
1101	2.5.0 (20000312)
1102	Dropped all kernel 2.0 and 2.1 compatibility
1103	Module i2c-i810: new
1104	Module ddcmon: new
1105	Module via686a: new
1106	Module i2c-amd756: fixed region request
1107	Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1108	Module w83781d: Don't change pin settings at initialization;
1109	also fix chip detection.
1110	Library: Support for ddcmon and via686a
1111	Program sensors-detect: Support for ddcmon and via686a
1112	Program sensors: Support for eeprom, ddcmon and via686a
1113
1114	2.4.5 (20000116)
1115	Introduced DESTDIR installation prefix
1116	Module lm80: fixes, temperature now read and set correctly
1117	Module i2c-voodoo3: driver enhancements
1118	Module w83781d: fixes, AS99127 works much better now
1119	Library: New ignore keyword in config file
1120	Programs: Support for new ignore keyword
1121	Program sensors-detect: Support for MGA detections
1122
1123	2.4.4 (19991201)
1124	Addition of the alpha release of AMD 756 SMBus host support.
1125	Many fixes and updates to the gl518sm driver
1126	Updates and fixes for device detection
1127
1128	2.4.0 (19990920)
1129	Too much to list.
1130	i2c and smbus parts are split off to a separate i2c package.
1131	New drivers and other stuff.
1132
1133	2.3.4 (19990616)
1134	Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1135	All: Now compiles against kernel 2.0.x (again ;)
1136	Module gl518sm: some updates and refinements
1137
1138	2.3.3 (19990603)
1139	All: Now compiles against kernel 2.3.x (x >= 1)
1140	Module i2c-voodoo3: Timing issue fixes
1141	Module bt869: Seems to be functional and relatively well tested
1142	Many modules were modified to be more compatible with the new
1143	Mutex structure in the new experimental kernels.
1144
1145	2.3.2 (19990507)
1146	Module i2c-hydra: Now compiles on 2.0.x kernels
1147	Module i2c-lm75: Slightly better detection
1148	* New, but not compiled by default:
1149	Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1150	Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1151
1152	2.3.1 (19990501)
1153	All: Now compiles on PPC
1154	Module i2c-hydra: NEW
1155	Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1156	Module w83781d: Removed deadlock (mutex was not initialized)
1157	Documentation: A few glitches removed
1158	Makefile: default module installation directory is now
1159	/lib/modules/current/extra/misc
1160	Program sensors-detect: PPC Hydra now detected
1161	Program sensors: Now prints complete GL518SM information
1162	Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1163
1164	2.3.0 (19990422)
1165	All: Many, many changes and improvements
1166	All: Many small bugs and problems removed
1167	Modules: New insmod parameters
1168	Modules: Much improved chip detection
1169	Module maxilife: NEW
1170	Module adm1021: MAX1617A now also supported
1171	Module adm9240: DS1780 now also supported
1172	Module w83781d: W83782D and W83783S now also supported
1173	Program sensors-detect: NEW
1174	Library: All chips now supported
1175	Documentation: Very much improved
1176
1177	2.2.2 (199903??)
1178	Just some minor updates and bug fixes.
1179
1180	2.2.1 (19990218)
1181	All: Removed compile warnings
1182	Module i2c-dev: Small bug removed if DEBUG=1 was used
1183	Module sis5595: Now compiles for 2.0 kernels
1184	Module adm1021: Detection corrected
1185
1186	2.2.0 (19990216)
1187	All: Set copyrights to include 1999
1188	All: Small bugfixes
1189	I2C: Upgraded to newest archive of Simon Vogl
1190	Module i2c-dev: NEW
1191	Module i2c-ali15x3: NEW
1192	Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1193	directories, and somewhat improved
1194	Module sis5595: NEW
1195	Modules: Renamed all bus modules to i2c-*, new directory lay-out
1196	Library: Support for new chip drivers, several small bugs fixed
1197	Library manual pages: NEW
1198	Program i2cdetect: Moved to detect directory
1199	Program detect.pl: NEW
1200	Program doc-features: NEW
1201	Program sensors: Added man-page
1202	Document BUGS: Added cdrom bug and kernel i2c conflict
1203
1204	2.1.2 (19990116)
1205	Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1206	Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1207	Documentation in doc/kernel: NEW
1208
1209	2.1.1 (19990107)
1210	Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1211	and older
1212	Module gl518sm.o: Miscelaneous bugs and problems solved
1213	Program isadump: NEW
1214
1215	2.1.0 (19981230)
1216	Library: Completely NEW
1217	Program sensors: NEW
1218	Program grab_busses: NEW
1219	Program decode-dimms: More information
1220	Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1221	Module w83781d.o: NEW
1222	Module lm80.o: NEW
1223	Module gl518sm.o: new procfile beep, several small updates
1224	Modules: Now use pin readings, no more scaling within the kernel (use the
1225	library instead)
1226
1227	2.0.2 (19981214)
1228	Module eeprom.o: NEW
1229	Program decode-dimms: NEW
1230	Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1231	2.1.58
1232	Modules: Somewhat less verbose on transfers
1233	Module lm78.o now recognizes and handles lm78-j and lm79
1234
1235	2.0.1 (1998121?)
1236	Module gl518sm.o updates, to make it actually work
1237	Module lm75.o high/low-byte swapping write bug fixed
1238
1239	2.0.0 (19981209)
1240	Initial release

Note: See TracBrowser for help on using the browser.

Download in other formats:

Original Format