Context Navigation

CHANGES @ 2808

Revision 2808, 56.9 KB (checked in by phil, 8 years ago)
Tag and release 2.9.0
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`

Line
1	lm_sensors CHANGES file
2	-----------------------
3	This is a list of the most important changes in 2.x versions. It is by
4	no means complete, listing only the most significant changes.
5	The ultimate way to know what has changed is to run diff, or even neater,
6	ask CVS about it:
7
8	* Checkout the archive (see doc/cvs for how you can do this)
9	* Determine which tags are valid, by running this command from the
10	project root directory:
11	cvs status -v -l Makefile
12	Valid tags are usually of the form V2-1-0 for version 2.1.0
13	* Ask cvs for the difference between two versions:
14	cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15	for example:
16	cvs diff -r V2-0-0 -r V2-0-1 -u
17
18	-----------------------------------------------------------------------------
19
20	2.9.0 (20041228)
21	NOTE: Requires i2c-2.9.0 or newer!
22	File README.thinkpad: Update
23	File doc/chips/it87: Cleanups
24	File doc/chips/lm63: New
25	File etc/sensors.conf.eg: Set via686a voltage limits
26	File kernel/chips/Module.mk: Resync module list with mkpatch
27	File kernel/include/sensors_compat.h: Define __devexit_p if missing
28	(kernels 2.4.16 and older)
29	Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
30	and dec_use removed in release 2.8.0
31	Modules (all chip drivers): Remove owner from i2c_driver; pass
32	controlling_mod to i2c_register_entry() again
33	Module bmcsensors: Support function 1/x
34	Module i2c-amd756: Display the real bus name
35	Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
36	Module i2c-i801: Support i2c block read (ICH5 and higher)
37	Add PEC support for ICH6
38	Add support for ICH7
39	Module i2c-ipmb: Remove from build since it doesn't work
40	Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
41	Module icspll: Fix compilation
42	Module lm63: New driver for the National Semiconductor LM63
43	Module lm83: Use signed types for temperatures
44	Check limits on register writes
45	Module lm87: Round voltages properly
46	Retry on read errors (David Knierim)
47	Less agressive init (no reset)
48	Module lm90: Use signed types for temperatures
49	Check limits on register writes
50	Module lm93: Added module parameter for VID pin input thresholds.
51	Fix typo in dynamic VID alarms
52	Adds a couple log messages for failed transactions (David
53	Knierim)
54	Fix compilation breaking C99-ism (Axel Thimm)
55	Fix block read retries
56	Module pc87360: Support secondary Super-I/O address
57	Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
58	Library: Add lm63 support
59	Add lpc47b397 support
60	Programs *.init: Rename lockfile to match file name
61	Programs i2cset, isaset: Written byte/word can be masked
62	Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
63	Program mkpatch: Include i2c-amd756-s4882
64	Program pwmconfig: Handle new (well, back to old) pwm files names for
65	Linux 2.6.10 and up
66	Program sensord: Do not scale load average (Aurelien Jarno)
67	Program sensors: Add lm63, lpc47b397 support
68	Support DDR2 memory module EEPROMs (Rudolf Marek)
69	Support only one location for the default configuration file
70	Display the default configuration file location in --help
71	Simplify the configuration file opening code
72	Program sensors-detect: Improve LM63 detection
73	Discard IBM Thinkpad detection code
74	Add PCA9556, LPC47B397, ICH7 detection
75	Fix W83792D detection, add W83791SD detection
76
77
78	2.8.8 (20041007)
79	File doc/donations: Update
80	File doc/lm_sensors-FAQ.texi: Add 4.6.1
81	Update 4.7
82	File doc/chips/gl518sm: Update "iterate" info
83	File doc/chips/it87: Discard outdated module parameters
84	File doc/chips/lm75: LM77 is not supported
85	File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
86	File doc/chips/lm93: New
87	File doc/chips/w83l785ts: Improvements
88	File etc/sensors.conf.eg: Fix it87 lines order
89	Update lm87 section
90	File kernel/include/sensors_vid.h: Support VRM 10.0
91	Library: Support 2.6 adm1025
92	Preliminary support for 2.6 lm87
93	Support 2.6 adm9240
94	Allow an alternative sysfs file name for chip features (2.6)
95	Fix lm83 critical limits (2.6)
96	Add lm93 support
97	Prevent some procfs errors from being silently ignored
98	Makefiles: Implement user_uninstall (Rudolf Marek)
99	Spoof LOGNAME and HOSTNAME when making html man pages
100	Module adm1025: Refine detection
101	Update limit registers again (revert of 2.8.1)
102	Init high limits if they read 0
103	Fix conversions
104	Module lm75: Refine detection
105	Module lm78: Fix init
106	Module lm83: Default to kind lm83 if forced.
107	Fix temperature macros.
108	Module lm90: Add LM86, MAX6657 and MAX6658 support
109	Module lm93: New
110	Module mtp008: Fix the setting of limits on temp2
111	Module pca9540: Refine detection
112	Module pc87360: Change voltage/thermistor magnitude from 2 to 3
113	Support VID
114	Fix fan_div file when fan count is less than 3
115	Additional init and debug
116	Module smsc47m1: Fix pwm_enable being inverted
117	Module w83627hf: Add alternate VCORE/in0 calculation method
118	Remove reset of chip by driver on initialization
119	Module w83781d: Fix default VRM for w83791d
120	Module w83l785ts: Implement read error handling (backport from 2.6)
121	Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
122	Wait for user input to continue (as opposed to 5 sec
123	delay), can be skipped with -y
124	Various cleanups and code refactoring
125	Update manual pages
126	Program fancontrol.init: New (Dean Takemori)
127	Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
128	Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
129	(Giuseppe Della Bianca)
130	Program mkdev.sh: Detect devfs and refuse to run
131	Use mknod's mode instead of chmod
132	Program mkpatch: Include xeontemp and pc87360
133	Program sensors: Rework adm1025 support
134	Display pc87365/pc87366 VID
135	Improve smsc47m1 support
136	Hide 2.6 adm1027 alarm_mask being missing
137	Print VRM version for all supported chips
138	Program sensors-detect: Support LM93, LM77, LM63
139	Support PC8739x Super-I/O family (no sensors)
140	Fix PCA9540 support
141	Refine ADM1025/ADM1025A detection
142	Refine LM75 detection
143	Ignore missing /proc/modules (Andras Bali)
144	Script-wide Perl cleanups
145	Support udev
146	Support W83792D, LM96000
147
148
149	2.8.7 (20040611)
150	File README.thinkpad: Update 24RF08 status
151	File doc/fan-divisors: More info on accuracy
152	File doc/lm_sensors-FAQ.texi: Update 4.27
153	File doc/chips/adm1031: New
154	File doc/chips/max1619: New
155	File doc/chips/pc87360-fan: Renamed to pc87360
156	File doc/chips/pc87360: Big update
157	File doc/chips/w83781d: Update AS99127F documentation
158	File etc/sensors.conf.eg: Add comments about BP6 voltages
159	Add comment on Asus A7V8X-X VCore
160	Misc fixes to lm80 section
161	Update via686a section
162	New lm99 section
163	Add section for LM85-like chips
164	Preliminary pc87366 section
165	Add comment on GL520SM application modes
166	Document beep_enable (Aurelien Jarno)
167	Preliminary max1619 section
168	Preliminary adm1030 and adm1031 sections
169	Library: Fix 2.6 VRM
170	Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
171	Fully support the PC87360 family
172	Support the lm99
173	Add version and date strings
174	Support 2.6 max1619
175	Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
176	Man page i2cdetect.8: document new command line flags
177	Man page i2cdump.8: More details on how i2cdump can write to a chip
178	Modules (all chip drivers): Rework memory allocation scheme.
179	Module adm1031: New (Alexandre d'Alton)
180	Module bmcsensors: Fix oops by creating thread for initialization
181	Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
182	Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
183	asb100.c, lm92.c: Use swab16
184	Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
185	Module gl520sm: Less agressive initialization process
186	Fix temp1 limits being unsettable in application
187	Ensure that temp2 and in4 are not used at the same time
188	Module i2c-i801: Support 6300ESB and ICH6
189	Module i2c-piix4: Don't blacklist IBM with Serverworks chip
190	Module i2c-sis645: Add support for SiS655
191	Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
192	Module lm90: Support LM99 and LM89
193	Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
194	Get rid of useless i2c_probe call
195	Module max1619: New (Alexey Fisher)
196	Module p4b_smbus: Add support for mobile versions of the 82801
197	(Axel Thimm)
198	Module pc87360-fan: Renamed to pc87360
199	Module pc87360: Also support PC87365 and PC87366
200	Add write support
201	Correctly set the chip name depending on the type
202	Add voltage and temperature support
203	Fix fan speed computation
204	Retrieve fans configuration from Super-I/O space
205	Export pwm_enable (read-only)
206	Honor pwm invert bits
207	Clear fan alarms after we read them
208	Do not read fan data when monitoring is disabled
209	Do not include SENSORS_INSMOD stuff
210	New module parameter: init
211	Fan clock dividers change automatically
212	Add thermistor dupport
213	Module smsc47m1: Lock on reads and writes
214	Various PWM fixes
215	Module thmc50: Fix address range
216	Module via686a: Fix voltage roundings
217	Simplify temperature conversions
218	Module w83781d: Drop PWM support for as99127f
219	Invert AS99127F beep bits in driver rather than user-space
220	Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
221	Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
222	Program fancontrol.pl: New
223	Program i2cdetect: Adapt probing method to address
224	Add -q and -r flags to force probing methods
225	Allow probing range selection
226	Program isadump: Major improvements
227	Program isaset: New
228	Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
229	module
230	Include i2c-nforce2
231	Program sensord: New --rrd-no-average parameter
232	Syncronize time slots with rrd
233	Fix W83781D temp3 alarm (Aurelien Jarno)
234	Add ASB100 support (Andrew May)
235	Program sensors: Fully support the PC87360 family
236	Fix lm80 temperature alarms
237	Support the lm99
238	Do not invert AS99127F beep bits anymore
239	Fix W83781D temp3 alarm (Aurelien Jarno)
240	Print library version string
241	Program sensors-detect: Rework Super I/O detection
242	Support SiS655/SiS96x
243	Support ADT7461 and ADT7467
244	Better support for ADM1027, ADT7460 and ADT7463
245	Explicitly support ADM1028
246	Scan all logical devices of PC87365 and PC87366
247	Detect LM92, LM76, MAX6633, MAX6634, MAX6635
248	Detect eeproms with software write protect (not
249	enabled by default)
250	Support ALi 1563 (2.6 only)
251	Drop LTC1710 support
252	Use byte reads for probing on ranges 0x30-0x37 and
253	0x50-0x5F
254	Improve LM89 and LM99 support
255	Support GeForce FX 5900 video cards
256	Fix devfs misdetection (Aurelien Jarno)
257	Detect 6300ESB, ICH6
258	Fix double detection of ISA chips
259	Support MAX1619
260	Support PC87373 Super-I/O
261	Fix unknown adapters appearing multiple times
262	Refine MAX6650/MAX6651 detection
263
264
265	2.8.6 (20040405)
266	File README.thinkpad: Update status
267	File doc/chips/pca9540: New
268	File doc/chips/pc87360-fan: New
269	File etc/sensors.conf.eg: Update pcf8591 default configuration
270	Library: Switch to new sysfs naming standard
271	Fix gcc 3.3 warnings (Philipp Thomas)
272	Support 2.6 ds1621 and pcf8591
273	Change pcf8591 magnitudes
274	Support pc87360-fan
275	Makefile: Install shared library 755
276	Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
277	Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
278	Modules ds1621, pcf8591: Check for capabilities before using them
279	(Aurelien Jarno)
280	Modules pcf8574, pcf8591: Cleanups
281	Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
282	Module adm1021: Better detection and initialization
283	Module pca9540: New driver for the Philips PCA9540
284	Module pc87360-fan: New driver for the National Semiconductor PC87360,
285	PC87363 and PC87364 Super I/O chips
286	Module smsc47m1: Support the LPC47B27x
287	Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
288	Program i2cdetect: Skip special addresses by default
289	Program sensord: Prevent null pointer dereference (Tim Toohey)
290	Program sensors: Print the degree symbol in the terminal's current locale
291	(Aurelien Jarno)
292	Update pcf8591 print to support 2.6 driver
293	Support pc87360-fan
294	Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
295	Improved SiS chips support
296	Add a white list of IBM systems
297	Drop support of undetectable adapters
298	Fix smart battery detection
299	Add smart battery charger and manager detection
300	Rework adm1021 and clones detection
301	The PC87360, PC87363 and PC87364 Super I/O chips
302	now have a (preliminary) driver
303	Rework Super I/O detection
304	Better support of devfs
305	Program sensors-detect-stat.pl: New
306
307
308	2.8.5 (20040305)
309	File doc/chips/SUMMARY: Update
310	File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
311	Makefiles hotplug and rrd: Remove -o and -g arguments to install
312	Module bmcsensors: Increase max SDRs to 100
313	Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
314	Module i2c-amd756: Don't register driver to avoid driver conflicts.
315	(Daniel Rune Jensen)
316	Module it87: Better temperature sensor types handling (Takeru Komoriya)
317	Fix reset=1 (Takeru Komoriya)
318	Module lm80: Code cleanups
319	Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
320	Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
321	Module w83627hf: Add w83637hf support
322	Fix exported name
323	Fix PWM in w83627thf
324	Preserve other bits when forcing temp2/3 to comparator mode
325	Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
326	Remove asb100 support
327	Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
328	Define driver ID if i2c-id.h doesn't have it yet.
329	Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
330	Backport oops fix from Linux 2.6.
331	Modules (all chips): Get rid of useless headers
332	Program decode-edid.pl: Add sysfs support
333	Program sensors: Add w83637hf support
334	Add support for Shuttle Ethernet EEPROMs
335	Drop 2.6 subclient detection
336	Program sensors-detect: Add heuristics to the LM80 detection function
337	Add support for W83L785R, improve W83L784R/AR
338	Add GeForce FX 5600 as supported by rivatv
339	More Super IO chips, better handling
340	Library: Update to match renames in fscher
341	Reverse temporary changes to w83l785ts mappings
342	Fix vt1211 and vt8231 uch_config not being writable
343	Add 2.6 lm80 support
344	Add w83637hf support
345	Remove in6 and temp1 from vt1211 and vt8231
346	Add support for Shuttle Ethernet EEPROMs
347	Remove unused as99127f features
348
349
350	2.8.4 (20040207)
351	File doc/lm_sensors-FAQ.texi: Update 4.20.
352	File doc/chips/it87: Change hyst to low
353	File doc/chips/w83l785ts: New
354	File etc/sensors.conf.eg: Change it87 hyst to low
355	Fix w83697hf supposed to have temp3
356	Limits initialization for adm1025/ne1619
357	Handle fscher voltage conversions
358	Add Tyan Trinity S2495 KT400 setup (Eric
359	Schumann)
360	Fix fscher fan labels (Reinhard Nissl)
361	Library: Better 2.6 eeprom support
362	Change it87 hyst to low
363	Add 2.6 gl518sm, fscher support
364	Fix 2.6 negative voltages handling
365	Temporary fix to w83l785ts mappings
366	Module adm1025: Separate prefix for NE1619
367	Module adm1026: Remove use of temporary ID
368	Define addresses as a range
369	Module bmcsensors: Fix reservations
370	Module fscher: Externalize voltage conversions
371	Module eeprom: Remove memtype
372	Module i2c-piix4: Fix resource release error
373	Various cleanups
374	Program decode-vaio.pl: Add sysfs support
375	Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
376	Drop linux 2.2 support
377	Add w83627hf
378	Program sensors: Do not show algorithm by default
379	Cleanup temperature unit display code
380	Cleanup label spacing code
381	Fix output to UTF-8 terms (Marcel Sebek)
382	Simplify gl518sm print
383	Do not ignore errors in FSC chips prints
384	Fix w83l785ts print
385	Cleanup FSC chips prints
386	Program sensors-detect: Fix PATH issues
387	Correctly point to the fscher driver
388
389
390	2.8.3 (20040115)
391	File lm_sensors.spec: Update
392	Library: Add 2.6 eeprom, lm90 support
393	Fix 2.6 temp_hystX for 2.6.1-rc1 and later
394	Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
395	Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
396	Module i2c-amd756: Fix byte writes
397	Module i2c-tsunami: Cleanups (Daniel Nilsson)
398	Module it87: Fix sg_tlx writes; fix sensor type reporting;
399	add 8712 Super I/O detection;
400	remove initialization of temp_type and fan_ctl;
401	remove init and temp_type module parameters
402	Module lm90: Handle hysteresis differently
403	Module smartbatt: Fix detection, magnitudes, temp
404	Module w83781d: Fix negative voltages
405	Module w83l785ts: New
406	Program eeprog: Make 8 bit mode the default
407	Program fancontrol: Improvements, fixes, support 2.6 kernels
408	Program mkpatch: Add lm75.h
409	Program pwmconfig: Improvements, fixes, support 2.6 kernels
410	Program sensors: Add ASB100 support
411	Program sensors-detect: Add 8712 Super I/O detection;
412	add W83L785TS detection
413
414
415	2.8.2 (20031211)
416	IMPORTANT: Limit initialization removed from all chip drivers!
417	If you didn't run 'sensors -s' in the past you may need to now!
418	File sensors.conf.eg: Change lm75 scaling back to 1;
419	Add example for asb100
420	Library: Fix bmcsensors scaling, increase number of sensors;
421	Add w83627thf support; Advance version to 3.0.0;
422	Add hermes, ADM1032, ASB100 support;
423	Add it87 sensor type support;
424	Add sysfs support for kernel 2.6;
425	Fix memory leaks
426	Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
427	Fail if no kernel .config file exists;
428	Don't build module dependencies for user and user_install
429	Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
430	it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
431	smsc47m1, thmc50, via686a, w83627hf, w83781d:
432	Remove initialization of limits by driver.
433	Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
434	Modules (chip): Init cleanups
435	Module asb100: New
436	Module bmcsensors: Fix voltage scaling, voltage and fan limits
437	Modules ddcmon, eeprom: Add failure printks
438	Module fscher: New (Fujitsu-Siemens Hermes driver)
439	Module i2c-amd756: Fix AMD8111 support
440	Module i2c-amd8111: Fix byte writes
441	Module i2c-nforce2: Fix byte writes
442	Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
443	Module i2c-sis630: Sync with 2.6.0-X driver version
444	Module i2c-viapro: Add support for Via 8237
445	Module it87: Add pwm and "smart guardian" support;
446	add it87 sensor type support
447	Module lm75: Fix negative voltages
448	Module lm90: Add ADM1032 support
449	Module w83781d: Fix 791d and 627hf detection
450	Module w83627hf: Add VID support
451	Program dmidecode: Remove (sensors-detect doesn't need it anymore)
452	Program eeprog: New
453	Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
454	support sysfs for i2c bus search
455	Program i2cdetect: Add -l option to list busses
456	Program i2cdump: Add 'c' mode for consective address reads
457	Program mkpatch: Cleanups
458	Program pwmconfig: Handle multiple fans controlled by a single pwm
459	Program sensord: Remove ddcmon support
460	Program sensors: Add ADM1032 support; add messages for sysfs
461	Program sensors-detect: Prefer Super I/O drivers;
462	Fix W83627HF and W83791D detection; detect CSB6;
463	Detect ADM1029, ADM1030, ADM1031;
464	Detect W83637HF, W83697UF;
465	Add it87 sensor type support; add sysfs support
466	Reduce lm80 misdetects; remove PCFxxxx "detection"
467	Detect VT8237 (KT600)
468	Use VPD instead of DMI+ACPI for Thinkpad detection
469	Suggest new asb100 driver instead of w83781d
470
471
472	2.8.1 (20031005)
473	NOTE: Requires i2c-2.8.1 or newer!
474	File sensors.conf.eg: Improved adm1025 section
475	Default temp labels for as99127f
476	Improved lm83 section
477	Better support for Asus A7V8X-X
478	File doc/chips/SUMMARY: Add SMSC manufacturer ID
479	File doc/chips/adm1025: Add decent documentation (almost new)
480	File doc/chips/lm83: Known motherboards list update, misc updates
481	Library: Change adm1025 names (hyst/over become low/high)
482	Swap adm1025 temp1 and temp2 to match the driver's order
483	Advance version to 2.0.1
484	Update lm83 support
485	Add support for lm90, xeontemp, max6650
486	Add separate messages for read and write errors
487	Add missing message for parse error
488	Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
489	Modules (various): Fix includes for compilation on Alpha
490	Use the new i2c_delay function instead of the various
491	do_pause functions
492	Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
493	Module i2c-nforce2: Cleanups
494	Module i2c-i810: Use readl/writel for portable access to PCI memory
495	Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
496	Module i2c-savage4: Use readl/writel for portable access to PCI memory
497	Module i2c-sis630: Fix detection
498	Add block data read/write support
499	Module i2c-sis645: Detection method change/bugfix
500	Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
501	Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
502	Module adm1025: Major driver update
503	Add support for Philips NE1619
504	Simplify the driver a lot (unified voltages, unified
505	temperatures and much more)
506	Fix default voltage limits
507	Change default temperature limits
508	Swap remote and local temperatures to match the internal
509	registers order (make the code unification possible)
510	Export remote diode fault through alarms
511	Module ddcmon: Major update
512	Add half a dozen new features
513	Add checksum parameter (same as for the eeprom module)
514	Fix monitor limits
515	Module eeprom: Ignore Sony Vaio EEPROMs with a password set
516	Module lm78: Fix a fan_div/fan_min bug
517	Module lm83: Add t_crit and alarms support
518	Module lm90: New
519	Module max6650: New
520	Module saa1064: New
521	Module smsc47m1: Add support for 47M142
522	Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
523	enhance w83627thf support
524	Module w83781d: Enhance chip detection; clean up error returns;
525	fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
526	Module xeontemp: New
527	Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
528	Mark Rambus as unsupported
529	Program decode-edid.pl: New
530	Interfaces between our eeprom module and
531	parse-edid from the read-edid project
532	Program p4b_smbus: Fix SMP compilation
533	Program sensord: Add support for IT87 (Mike Black)
534	Change ADM1025 support to match the changes made to
535	the library
536	Program sensors: Rewrite and enhance EEPROM support
537	Change LM83 and ADM1025 support to match the changes
538	made to the library
539	Add DRDRAM support to print_eeprom
540	Exit(1) on /proc write failure (Malte Starostik)
541	Add LM90, MAX6650 support
542	Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
543	Add support for LM82, LM86, LM89
544	Improved W83781D family detection
545	Add support for AS19927F rev.2, ASB100 Bach
546	Add support for Asus Mozart-2 (3 types)
547	Add support for NE1619
548	Add support for FSC Hermes
549	Make sure /sbin is in the user's path
550	Fix EEPROM detection
551	Automatic module.conf and /dev/i2c* detection
552	Improve LM82 and LM83 detection
553	Handle "to-be-written" cleanly
554	Add detection for 47M14x Super I/O
555	Handle the one-address-many-chips-same-driver
556	case
557
558
559	2.8.0 (20030714)
560	NOTE: Requires i2c-2.8.0 or newer!!!
561	Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
562	2.4.13 or later required for mkpatch.
563	File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
564	i2c package
565	File doc/chips/fscscy: Add watchdog documentation
566	File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
567	File sensors.h: Now automatically generated
568	Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
569	add adm1026, lm83, lm85, w83791d support;
570	Advance version to 2.0.0
571	Makefiles: Generate warnings if new library won't be found by ld.so;
572	Modules now install in kernel/drivers/i2c/[busses,chips];
573	Ensure that headers in /usr/local/include are used first;
574	Don't use /usr/include headers for modules;
575	Handle multiple UTS_RELEASE definitions in linux/version.h;
576	Automatically generate kernel/include/sensors.h;
577	Remove old gzipped modules; remove old misc directory if empty;
578	Remove pre-2.4 installation method;
579	-Wall now the default;
580	Add new targets user, user_install, and help;
581	Run depmod after module installation
582	Modules (all): Cleanups including
583	- Add #include <i2c-proc.h>
584	- C99 initializers
585	- Remove #ifdef MODULE
586	- Remove #ifndef THIS_MODULE
587	- Remove #ifndef MODULE_LICENSE
588	- Remove other 2.1/2.2 #ifdefs
589	- Remove #include "sensors.h", copy SYSCTL defs to module
590	- Remove excess #includes
591	- Remove argument in i2c_register_entry()
592	- Remove dummy xxx_command() definition
593	- Remove EXPORT_NO_SYMBOLS
594	- Remove init_MUTEX #define
595	- Remove xxx_inc_use() and xxx_dec_use() functions; modules
596	no longer adjust their own refcounts
597	- Use module_init() and module_exit()
598	- Update to new i2c_driver struct definition
599	Modules (bus PCI): Convert to PCI-module-style initialization
600	Modules (several): Add support for AMD Opteron VRM (VID) encoding
601	Module adm1021: Set alarm on failed reads and report old value;
602	merge changes from kernel 2.5.54
603	Module adm1026: New
604	Module bmcsensors: Fix compile when DEBUG=1
605	Modules ddcmon, eeprom: Use i2c block reads if possible;
606	better error handling
607	Module ds1307: Add to Makefile
608	Module gl520sm: Fix temperature over/hyst writes
609	Module lm75: merge changes from kernel 2.5.54
610	Module lm83: New
611	Module lm85: New
612	Module i2c-ali1535: Check for invalid transaction
613	Module i2c-ali15x3: Check for invalid transaction
614	Module i2c-amd756: merge changes from kernel 2.5.54;
615	check for invalid transaction
616	Module i2c-amd8111: merge changes from kernel 2.5.54
617	Module i2c-i801: Add support for 82801EB (ICH5)
618	Module i2c-i810: Fix for some chips
619	Module i2c-nforce2: New
620	Module i2c-piix4: Check for invalid transaction
621	Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
622	Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
623	north bridges; SiS962 and SiS963 south bridges
624	Module i2c-viapro: Check for invalid transaction
625	Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
626	pwm and pwm enable support; update docs
627	Module smbus-arp: Check adapter for HW or SW PEC support;
628	add reset option
629	Module w83781d: Add support for w83791d
630	Module w83627hf: New
631	Program decode-dimms.pl: Recognize DDR and Rambus
632	Program eeprom: Fix writes for small eeproms
633	Program eeprom, eepromer: Use local i2c-dev.h for build
634	Program fancontrol: New
635	Program lm_sensors.init: Call sensors -s in start()
636	Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
637	Add adm1026,lm85 support;
638	Remove sensors.c file; add sensors_compat.h;
639	Remove patches to i2c-core.c and drivers/char/mem.c;
640	Now works only for kernels 2.4.13 or later
641	Program p4b_smbus: Fix 'make install';
642	Install in same place as other modules;
643	Clear correct bits in config word
644	Program pwmconfig: New
645	Program sensors: add adm1026, lm85, w83791d support
646	Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
647	w83627hf, w83627thf, w83697hf);
648	Add support for SiS651, SiS961, SiS745, SiS746;
649	Support dmidecode 2.0 and later;
650	Fix "C" format error;
651	Add support for adm1026, 82801EB (ICH5), W83791D;
652	Add support for w83l785ts, nForce2;
653	Fix UTF-8 incompatibility;
654	Better support for lm75;
655	Add support for lm83
656
657	2.7.0 (20021208)
658	NOTE: Requires i2c-2.7.0 or newer.
659	File doc/busses/i2c-ali1535: Add license, miscellaneous changes
660	File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
661	File doc/busses/i2c-sis645: Add license
662	File doc/chips/lm92: Add license, features
663	File doc/chips/maxilife: Add license, parameters, features
664	File doc/chips/smartbatt: Complete rewrite
665	File doc/chips/vt8231: Add license, parameters
666	File sensors.conf.eg: Add section for lm75; complete the lm78 section
667	Library: Add support for MC1066; add multiple VRM version support for lm87;
668	enhance adm1023 support; initial support for Sony Vaio eeprom;
669	add support for bmcsensors; add hacks for additional dummy drivers
670	Makefile: Take kernel source location from /lib/modules/x.x.x/build;
671	add flags for x86_64 compiles
672	Module adm1021: Add support for MC1066
673	Module bmcsensors: New
674	Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
675	kernel 2.5.43; fix 2.2 kernel compiles
676	Module gl518sm: Iterate allowed only for rev 0x00
677	Module i2c-amd756: Configure base address for nForce support;
678	check for uninitialized base address;
679	add support for amd8111 (SMBus 1.0)
680	Module i2c-amd8111: New (SMBus 2.0)
681	Module i2c-ipmb: New
682	Module i2c-ipmi: New
683	Module i2c-keywest: Sync with kernel 2.4.20
684	Module i2c-sis630: Add support for SiS730
685	Module i2c-sis645: Improve support for SiS645/961;
686	add support for SiS645DX/961 and SiS735;
687	fix 2.2 kernel compiles
688	Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
689	Module lm87: Add multiple VRM version support
690	Module vt1211: Fix inx limits and alarms; fix in0
691	Module vt8231: Fix inx limits and alarms; fix in0
692	Module w83781d: Fix in0/in1 initialization
693	Module smartbatt: New
694	Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
695	Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
696	stop decoding on checksum error
697	Program dmidecode: Fix read bug; upgrade to version 1.8
698	Program doc-insmod: Complete rewrite; fix author output
699	Program doc-features: Complete rewrite; handle missing sysctl entries;
700	handle unknown prefix with suggestion
701	Program lm_sensors.init: Remove spaces bug; add green/red output
702	Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
703	Program rrd: Add sanity limits to newly-created RRD.
704	Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
705	Program sensors: Add support for MC1066, Rambus Rimms;
706	fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
707	initial support for Sony Vaio eeprom
708	Program sensors-detect: Add support for MC1066, smart battery, 8235,
709	IPMI, AMD8111; add help if no sensors found;
710	add ACPI method for IBM system detection;
711	work with old Perl versions again;
712	initial support for Sony Vaio eeprom
713
714	2.6.5 (20020915)
715	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
716	File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
717	Library: Fix fan3_div writes for w8378* and it87; add vt8231
718	Module dmi_scan: new
719	Module ds1621: Fix enable/disable
720	Module eeprom: Do not corrupt 24RF08's when checksum=1
721	Module i2c-i801: Check for uninitialized base address;
722	enable if not enabled
723	Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
724	Module i2c-sis630: new
725	Module i2c-sis645: new
726	Module lm92: Fix in-kernel initialization
727	Module via686a: Remove VT8231 support
728	Module vt8231: new
729	Module w83781: recognize Asus "ASB100 Bach" as AS99127F
730	Program dmidecode: new
731	Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
732	Program mkpatch: Add Config.in entries for, lm92,
733	pcf8574, pcf8591, smsc47m1, vt1211;
734	add dmi_scan
735	Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
736	Program lm_sensors.init: fix stop()
737	Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
738	add support for logging loadavg in RRD;
739	fix down-converting raw labels for RRD;
740	update chip support, still behind sensors
741	Program sensors: Add /usr/local/etc to config file path;
742	fix -c and -u flags; add vt8231
743	Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
744	refuse to run on IBM systems;
745	fix sysconfig module numbering;
746	change quick write to not corrupt 24RF08's
747
748	2.6.4 (20020719)
749	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
750	File doc/vid: New
751	File include/sensors_vid.h: New
752	File sensors.conf.eg: Add vt1211, smsc47m1
753	Library: Add multiple VRM version support for adm1025, w83781d;
754	fix 'flex scanner jammed' on some systems;
755	add vt1211, smsc47m1, lm92;
756	fix access mode checking
757	Makefiles: For 2.4+ kernels, modules now install in
758	kernel/drivers/[i2c,sensors] , not misc/ , and
759	'make install' removes old versions in misc/ .
760	Use $CFLAGS and $CPPFLAGS if defined.
761	Module adm1025: Add multiple VID version support
762	Module ds1307: new
763	Module i2c-amd756: Add nVidia nForce support; fix block read length;
764	reliability improvements
765	Module i2c-hydra: Flush posted writes
766	Module i2c-i801: Add support for 82801DB (ICH4)
767	Module i2c-i810: Flush posted writes
768	Module i2c-savage4: new
769	Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
770	Module i2c-voodoo3: Flush posted writes
771	Module ds1307: New
772	Module lm92: New
773	Module smbus-arp: new
774	Module smsc47m1: new
775	Module via686a: Add support for VT8231 sensors
776	Module vt1211: new
777	Module w83781d: Add multiple VID version support; fix temp alarms
778	Program eeprom: new
779	Program i2cdump: Add smbus block command specification, add PEC support
780	Program lm_sensors.init: new
781	Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
782	pcf8574, pcf8591, smsc47m1, vt1211
783	Program p4b_smbus: Add support for ICH4
784	Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
785	Program sensord.init: Renamed, was prog/init/sensors
786	Program sensord: Major update, now requires rrd source;
787	not compiled by default
788	Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
789	(don't display algo. and adap.) option;
790	add vt1211, smsc47m1, lm92
791	Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
792	add 82801DB, LM85; fix perl warnings;
793	generate /etc/sysconfig/lm_sensors for
794	lm_sensors.init script
795
796	2.6.3 (20020322)
797	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
798	Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
799	File doc/chips/it87: add more temp_type help
800	File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
801	add adm1021 section; add lm87 AIN[1,2] template;
802	swap negative voltage limits for 782d,783s,627hf,
803	697hf,it87; add more it87 help; swap neg. voltage
804	limits for lm78(-j), lm79, w83781d, as99127f
805	Library: Add PCF8591, W83697HF, ADM1023 support;
806	fix w83* fan_min computes;
807	swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
808	Module adm1024: Add MODULE_LICENSE("GPL")
809	Module bt869: Add s-video out and DVD resolution support
810	Module eeprom: Add support for locations 128-255; rename /proc entries in hex
811	Module fscscy: implement min/max for voltages and fans
812	Module i2c-amd756: Add support for AMD768
813	Module i2c-i810: Add support for 810E
814	Module i2c-keywest: Big update, sync with kernel 2.4.18
815	Module i2c-piix4: Check for uninitialized base address
816	Module i2c-sis5595: Blacklist 645, 735
817	Module i2c-viapro: Check for uninitialized base address
818	Module gl518sm: Standardize /proc entries in0-3
819	Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
820	fan -> fan1; fix temp2 limit writes
821	Module pcf8574: Add support for PCF8574A; /proc interface changed
822	Module pcf8591: new
823	Module sis5595: Blacklist 645, 735
824	Module w83781d: Add W83697HF support; allow force_subclients parameter
825	for Tyan 2460
826	Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
827	Program decode-vaio.pl: new
828	Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
829	add text output
830	Program init/sensors: New SysV init script
831	Program mkpatch.pl: Add support for fscscy, add more help entries
832	Program p4b_smbus: new
833	Program rrd: Install summ_week.cgi
834	Program sensors: Add PCF8591, W83697HF, ADM1023 support,
835	clean up chassis intrusion prints
836	Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
837	fix Via686a and it87 detection;
838	add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
839	fix uninitialized values; it87 beats lm78
840
841	2.6.2 (20011118)
842	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
843	Chip Modules (all): malloc.h -> slab.h
844	Modules (all): Add MODULE_LICENSE("GPL")
845	File doc/FAQ: More updates and additions
846	File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
847	Library: Add fscpos and fscscy support, fix gl520 in4 ID,
848	update it87 alarm ID's.
849	Module fscpos: new (Fujitsu-Siemens Poseidon driver)
850	Module fscscy: new (Fujitsu-Siemens Scylla driver)
851	Module i2c-amd756: Improve busy handling/printk's
852	Module i2c-i801: Add 82801CA/CAM support
853	Module i2c-keywest: Sync with PPC people, it works now
854	Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
855	Module i2c-viapro: Add Via VT8233 support
856	Module it87: Merge alarm_* /proc entries to alarms
857	Module sis5595: Fix support for rev B0
858	Module via686a: Make limit initializations reliable
859	Module w83781d: Allow init=0 parameter to bypass initialization
860	Program isadump: Add flat address space (PCI) support
861	Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
862	fscpos, it87, maxilife, mtp008
863	Program sensors: Fix w83781d temp precision
864	Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
865	Fujitsu Poseidon and Scylla,
866	Intel 82443MX and 82801CA/CAM detection,
867	add ITE 8172G detection (driver in kernel 2.4.10)
868
869	2.6.1 (20010830)
870	File BUGS: Updated
871	File doc/FAQ: More updates and additions
872	File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
873	File sensors.conf.eg: Fix/enhance it87 section
874	Library: ds1621 and it87 updates
875	Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
876	Module i2c-amd756: Add AMD 766 support
877	Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
878	Module i2c-piix4: Add Serverworks CSB5 support
879	Module i2c-sis5595: Recognize unsupported chips and refuse to load
880	Module adm1025: Fixed temp2 min/max writes
881	Module ds1621: Add 12-bit precision mode
882	Module it87: Enable all alarms, add in8 support, add sensor type selection
883	Module sensors: Don't initialize i2c-proc (moved to i2c-core);
884	remove support for module
885	Module sis5595: Recognize unsupported chips and refuse to load
886	Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
887	Program eepromer: new
888	Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
889	of sensors.c as a module in kernel
890	Program sensors: it87 updates; adjust temp. precision for some chips
891	Program sensors-detect: Fix ADM1024 and ADM1025 detection;
892	recognize unsupported SiS chips;
893	recognize AMD 766 and Serverworks CSB5.
894
895	2.6.0 (20010612)
896	NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
897	If your make fails because it can't find <linux/i2c-proc.h>, you
898	forgot this step!!!
899	File doc/FAQ: Many, many updates and additions
900	File doc/busses/i2c-sis5595: new
901	File doc/busses/i2c-tsunami: new
902	File doc/chips/it87: new
903	File doc/chips/via686a: Claim support for 686b.
904	File README.thinkpad: new
905	File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
906	Add lm87, adm9240, ds1780, lm81 templates;
907	Enhance help comments in file;
908	Add Tyan S2510 dual-MTP008 example;
909	Make separate sis5595 section.
910	Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
911	Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
912	Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
913	Add support for maxilife-nba and amd1024;
914	Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
915	Chip Modules (all ISA): Remove #include "i2c-isa.h"
916	Chip Modules (all): Change from sensors_* to i2c_* globals
917	for new i2c-proc.[ch]
918	Makefiles: enhance to support Alpha architecture
919	Module adm1021: Fix lm84 and gl523sm support
920	Module adm1024: new
921	Module i2c-i801: Chip detection cleanup
922	Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
923	Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
924	Module i2c-tsunami: New
925	Module i2c-via: Ensure i2c bus is tristated correctly.
926	Module it87: new driver for IT8705, IT8712, Sis950 chips
927	Module lm78: Recognize chipid=0x20
928	Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
929	Module mtp008: Fix temp initializations;
930	Save BIOS pin configuration of temps and fans;
931	Fix sensor type reads/writes and fan min writes;
932	Fix spurious invalid sensor type messages
933	Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
934	used for patched kernel now.
935	Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
936	Module sis5595: Fix temp, add in4 for chip revision 0xc0;
937	Allow force_addr=0xaddr
938	Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
939	Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
940	reading changes; Add messages for subclient
941	registration failure
942	Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
943	Program i2cset: new
944	Program isadump: fix for Alpha arch. compiles
945	Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
946	Remove ltc1710; Fix i2c_sis5595 typo;
947	Support kernel 2.4.5 makefile change;
948	Add i2c-tsunami; fixed i2c-voodoo3 configuration
949	Program sens_update_rrd: new
950	Program sensord: Add -d (debug) and -p (pid-file) options
951	Program sensors: Change reported version from 1.3 to the lm_sensors version;
952	Fix swapped limit and hysteresis on 9240, 5595, 686a;
953	Change mtp008 temps from max/min to limit/hyst;
954	Add maxilife-nba, adm1024, it87 support.
955	Program sensors-detect: Recognize lm78 with chipid=0x20;
956	Recognize SMSC Victory66 South Bridge;
957	Add devfs /dev/i2c/x support;
958	Add adm1024, it87xx support; Add thinkpad warning.
959	Program tellerstats: new
960
961	2.5.5 (20010115)
962	NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
963	you have kernel 2.4.0-prerelease or greater.
964	Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
965	File doc/developers/proc: new
966	File sensors.conf.eg: Add mtp008 entries, adm1025 entries
967	Library: Add ds1621, mtp008 support
968	Module adm1021: Add support for adm1021a / adm1023
969	Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
970	Module adm1025: Add support for remote temp; rename /proc entries to
971	in[0-5] and temp[1-2]; fix negative temp readings
972	Module adm9240: Rename /proc entries to in[0-5]
973	Module ddcmon: allow force and force_ddcmon parameters
974	Module ds1621: new
975	Module i2c-ali1535: Enhance error checking and recovery; add mutex
976	Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
977	Module i2c-piix4: add support for ServerWorks southbridge OSB4
978	Module lm87: cleanup, update voltage calculations
979	Module mtp008: new
980	Module pcf8574: change update time to 5 seconds
981	Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
982	Module w83781d: fix beep setting via /proc
983	Programs editticket, readticket: new
984	Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
985	Program mkpatch.pl: more fixes; now adds many more modules
986	Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
987	add adm1025 temp2; report temp limits correctly as
988	min/max or limit/hysteresis; print message if no
989	sensors are found. Removed false errors from lm87 reads.
990	Program sensors-detect: Add ds1621, mtp008 detection;
991	add ServerWorks detection
992
993	2.5.4 (20001012)
994	Module i2c-viapro: Add support for Via 596B (0x3051)
995	Program m7101: moved to CVS tree, updated for 2.4.0 kernels
996	Program mkpatch.pl: fixed infinite loop
997	Program sensors-detect: Detect Via 596B (0x3051)
998
999	2.5.3 (20001008)
1000	NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1001	File useful_addresses.html: update
1002	Library: Add lm87 support
1003	Module pcf8574: new
1004	Module i2c-ali1535: new
1005	Module i2c-ali15x3: removed force #ifdef.
1006	Module i2c-i801: support Intel 82801BA (815E chipset)
1007	Module i2c-i801: add i2c block write support, fix smbus block bugs
1008	(requires i2c 2.5.3 package)
1009	Module i2c-i810: support Intel 82815
1010	Module lm87: new
1011	Module sensors: Fix for kernel 2.4.0-test8
1012	(remove copy_to_user_ret and put_user_ret)
1013	Module w83781d: limit fan divisors to 8 max. for as99127f
1014	Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1015	Program i2cdump: Add smbus block read support
1016	Programs i2cdetect, i2cdump: Improve error reporting
1017	Program sensors: new switch -u (--unknown)
1018	Program sensors-detect: detect Intel 82801BA (815E chipset)
1019	Program sensors-detect: detect Intel 82815
1020	Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1021	Program sensors-detect: detect National LM87
1022	Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1023	Program sensors-detect: Improve error reporting
1024
1025	2.5.2 (20000709)
1026	File sensors.conf.eg: Fix lm80 in8 calculation
1027	Module w83781d: W83783S no longer crashes on unloading
1028	Program sensors-detect: more robustness in case of unknown i2c adapters
1029	Program sensors-detect, libsensors: fix eeprom size reporting
1030	Program sensord: more flexibility, support for alarm scanning etc.
1031	Program sensors: support for ignore setting on sensor alarms.
1032	Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1033
1034	2.5.1 (20000618)
1035	Library: Add adm1025 support
1036	Module adm1025: new
1037	Module ddcmon: Fixed bus scan which could hang SMBus
1038	Module i2c-keywest: new
1039	Module maxilife: Add support for Maxilife '99 (NBA)
1040	Module via686a: Enable sensors if not enabled by BIOS
1041	Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1042	Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1043	Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1044	Module w83781d: Fis as99127f fan speed (was 66% too high)
1045	Module w83781d: Improve beep input checking
1046	Program i2cdump: Add Winbond-style bank selection
1047	Program isadump: Add Winbond-style bank selection
1048	Program sensors: Add adm1025 support.
1049	Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1050	Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1051	File sensors.conf.eg: Add Maxilife '99 entries
1052	File sensors.conf.eg: Remove some as99127f entries.
1053	Note: For as99127f, reinstall sensors.conf.eg manually (make install
1054	won't reinstall it) or else 'sensors -s' will fail.
1055
1056	2.5.0 (20000312)
1057	Dropped all kernel 2.0 and 2.1 compatibility
1058	Module i2c-i810: new
1059	Module ddcmon: new
1060	Module via686a: new
1061	Module i2c-amd756: fixed region request
1062	Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1063	Module w83781d: Don't change pin settings at initialization;
1064	also fix chip detection.
1065	Library: Support for ddcmon and via686a
1066	Program sensors-detect: Support for ddcmon and via686a
1067	Program sensors: Support for eeprom, ddcmon and via686a
1068
1069	2.4.5 (20000116)
1070	Introduced DESTDIR installation prefix
1071	Module lm80: fixes, temperature now read and set correctly
1072	Module i2c-voodoo3: driver enhancements
1073	Module w83781d: fixes, AS99127 works much better now
1074	Library: New ignore keyword in config file
1075	Programs: Support for new ignore keyword
1076	Program sensors-detect: Support for MGA detections
1077
1078	2.4.4 (19991201)
1079	Addition of the alpha release of AMD 756 SMBus host support.
1080	Many fixes and updates to the gl518sm driver
1081	Updates and fixes for device detection
1082
1083	2.4.0 (19990920)
1084	Too much to list.
1085	i2c and smbus parts are split off to a separate i2c package.
1086	New drivers and other stuff.
1087
1088	2.3.4 (19990616)
1089	Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1090	All: Now compiles against kernel 2.0.x (again ;)
1091	Module gl518sm: some updates and refinements
1092
1093	2.3.3 (19990603)
1094	All: Now compiles against kernel 2.3.x (x >= 1)
1095	Module i2c-voodoo3: Timing issue fixes
1096	Module bt869: Seems to be functional and relatively well tested
1097	Many modules were modified to be more compatible with the new
1098	Mutex structure in the new experimental kernels.
1099
1100	2.3.2 (19990507)
1101	Module i2c-hydra: Now compiles on 2.0.x kernels
1102	Module i2c-lm75: Slightly better detection
1103	* New, but not compiled by default:
1104	Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1105	Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1106
1107	2.3.1 (19990501)
1108	All: Now compiles on PPC
1109	Module i2c-hydra: NEW
1110	Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1111	Module w83781d: Removed deadlock (mutex was not initialized)
1112	Documentation: A few glitches removed
1113	Makefile: default module installation directory is now
1114	/lib/modules/current/extra/misc
1115	Program sensors-detect: PPC Hydra now detected
1116	Program sensors: Now prints complete GL518SM information
1117	Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1118
1119	2.3.0 (19990422)
1120	All: Many, many changes and improvements
1121	All: Many small bugs and problems removed
1122	Modules: New insmod parameters
1123	Modules: Much improved chip detection
1124	Module maxilife: NEW
1125	Module adm1021: MAX1617A now also supported
1126	Module adm9240: DS1780 now also supported
1127	Module w83781d: W83782D and W83783S now also supported
1128	Program sensors-detect: NEW
1129	Library: All chips now supported
1130	Documentation: Very much improved
1131
1132	2.2.2 (199903??)
1133	Just some minor updates and bug fixes.
1134
1135	2.2.1 (19990218)
1136	All: Removed compile warnings
1137	Module i2c-dev: Small bug removed if DEBUG=1 was used
1138	Module sis5595: Now compiles for 2.0 kernels
1139	Module adm1021: Detection corrected
1140
1141	2.2.0 (19990216)
1142	All: Set copyrights to include 1999
1143	All: Small bugfixes
1144	I2C: Upgraded to newest archive of Simon Vogl
1145	Module i2c-dev: NEW
1146	Module i2c-ali15x3: NEW
1147	Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1148	directories, and somewhat improved
1149	Module sis5595: NEW
1150	Modules: Renamed all bus modules to i2c-*, new directory lay-out
1151	Library: Support for new chip drivers, several small bugs fixed
1152	Library manual pages: NEW
1153	Program i2cdetect: Moved to detect directory
1154	Program detect.pl: NEW
1155	Program doc-features: NEW
1156	Program sensors: Added man-page
1157	Document BUGS: Added cdrom bug and kernel i2c conflict
1158
1159	2.1.2 (19990116)
1160	Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1161	Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1162	Documentation in doc/kernel: NEW
1163
1164	2.1.1 (19990107)
1165	Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1166	and older
1167	Module gl518sm.o: Miscelaneous bugs and problems solved
1168	Program isadump: NEW
1169
1170	2.1.0 (19981230)
1171	Library: Completely NEW
1172	Program sensors: NEW
1173	Program grab_busses: NEW
1174	Program decode-dimms: More information
1175	Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1176	Module w83781d.o: NEW
1177	Module lm80.o: NEW
1178	Module gl518sm.o: new procfile beep, several small updates
1179	Modules: Now use pin readings, no more scaling within the kernel (use the
1180	library instead)
1181
1182	2.0.2 (19981214)
1183	Module eeprom.o: NEW
1184	Program decode-dimms: NEW
1185	Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1186	2.1.58
1187	Modules: Somewhat less verbose on transfers
1188	Module lm78.o now recognizes and handles lm78-j and lm79
1189
1190	2.0.1 (1998121?)
1191	Module gl518sm.o updates, to make it actually work
1192	Module lm75.o high/low-byte swapping write bug fixed
1193
1194	2.0.0 (19981209)
1195	Initial release

Note: See TracBrowser for help on using the browser.

Download in other formats:

Original Format