root/lm-sensors/trunk/CHANGES @ 2415

Revision 2415, 44.9 KB (checked in by mds, 9 years ago)

add 655 support
patch from Ken Healy <k.healy@…>

This patch experimentally enables SiS 655 support by the i2c-sis645 driver.

It simply modifies the driver to also accept the SiS 655 as a valid host
bridge.

Partially tested on a Gigabyte GA-SINXP1394 (SiS655/963), no problems so far.
Driver successfully enables the SMBus controller, i2cdetect finds the usual
devices, and i2cdump successfully reads the DIMM SPD eeprom's.

The patch is against the lm_sensors-2.8.5 release.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3This is a list of the most important changes in 2.x versions. It is by
4no means complete, listing only the most significant changes.
5The ultimate way to know what has changed is to run diff, or even neater,
6ask CVS about it:
7
8  * Checkout the archive (see doc/cvs for how you can do this)
9  * Determine which tags are valid, by running this command from the
10    project root directory:
11      cvs status -v -l Makefile
12    Valid tags are usually of the form V2-1-0 for version 2.1.0
13  * Ask cvs for the difference between two versions:
14      cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15    for example:
16      cvs diff -r V2-0-0 -r V2-0-1 -u
17
18-----------------------------------------------------------------------------
19
202.8.7 (2004xxxx)
21  Module i2c-sis645: Add support for SiS655
22
23
242.8.6 (20040405)
25  File README.thinkpad: Update status
26  File doc/chips/pca9540: New
27  File doc/chips/pc87360-fan: New
28  File etc/sensors.conf.eg: Update pcf8591 default configuration
29  Library: Switch to new sysfs naming standard
30           Fix gcc 3.3 warnings (Philipp Thomas)
31           Support 2.6 ds1621 and pcf8591
32           Change pcf8591 magnitudes
33           Support pc87360-fan
34  Makefile: Install shared library 755
35  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
36  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
37  Modules ds1621, pcf8591: Check for capabilities before using them
38                           (Aurelien Jarno)
39  Modules pcf8574, pcf8591: Cleanups
40  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
41  Module adm1021: Better detection and initialization
42  Module pca9540: New driver for the Philips PCA9540
43  Module pc87360-fan: New driver for the National Semiconductor PC87360,
44                      PC87363 and PC87364 Super I/O chips
45  Module smsc47m1: Support the LPC47B27x
46  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
47  Program i2cdetect: Skip special addresses by default
48  Program sensord: Prevent null pointer dereference (Tim Toohey)
49  Program sensors: Print the degree symbol in the terminal's current locale
50                   (Aurelien Jarno)
51                   Update pcf8591 print to support 2.6 driver
52                   Support pc87360-fan
53  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
54                          Improved SiS chips support
55                          Add a white list of IBM systems
56                          Drop support of undetectable adapters
57                          Fix smart battery detection
58                          Add smart battery charger and manager detection
59                          Rework adm1021 and clones detection
60                          The PC87360, PC87363 and PC87364 Super I/O chips
61                          now have a (preliminary) driver
62                          Rework Super I/O detection
63                          Better support of devfs
64  Program sensors-detect-stat.pl: New
65
66
672.8.5 (20040305)
68  File doc/chips/SUMMARY: Update
69  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
70  Makefiles hotplug and rrd: Remove -o and -g arguments to install
71  Module bmcsensors: Increase max SDRs to 100
72  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
73  Module i2c-amd756: Don't register driver to avoid driver conflicts.
74                     (Daniel Rune Jensen)
75  Module it87: Better temperature sensor types handling (Takeru Komoriya)
76               Fix reset=1 (Takeru Komoriya)
77  Module lm80: Code cleanups
78  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
79  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
80  Module w83627hf: Add w83637hf support
81                   Fix exported name
82                   Fix PWM in w83627thf
83                   Preserve other bits when forcing temp2/3 to comparator mode
84  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
85                  Remove asb100 support
86  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
87          Define driver ID if i2c-id.h doesn't have it yet.
88  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
89          Backport oops fix from Linux 2.6.
90  Modules (all chips): Get rid of useless headers
91  Program decode-edid.pl: Add sysfs support
92  Program sensors: Add w83637hf support
93                   Add support for Shuttle Ethernet EEPROMs
94                   Drop 2.6 subclient detection
95  Program sensors-detect: Add heuristics to the LM80 detection function
96                          Add support for W83L785R, improve W83L784R/AR
97                          Add GeForce FX 5600 as supported by rivatv
98                          More Super IO chips, better handling
99  Library: Update to match renames in fscher
100           Reverse temporary changes to w83l785ts mappings
101           Fix vt1211 and vt8231 uch_config not being writable
102           Add 2.6 lm80 support
103           Add w83637hf support
104           Remove in6 and temp1 from vt1211 and vt8231
105           Add support for Shuttle Ethernet EEPROMs
106           Remove unused as99127f features
107
108
1092.8.4 (20040207)
110  File doc/lm_sensors-FAQ.texi: Update 4.20.
111  File doc/chips/it87: Change hyst to low
112  File doc/chips/w83l785ts: New
113  File etc/sensors.conf.eg: Change it87 hyst to low
114                            Fix w83697hf supposed to have temp3
115                            Limits initialization for adm1025/ne1619
116                            Handle fscher voltage conversions
117                            Add Tyan Trinity S2495 KT400 setup (Eric
118                              Schumann)
119                            Fix fscher fan labels (Reinhard Nissl)
120  Library: Better 2.6 eeprom support
121           Change it87 hyst to low
122           Add 2.6 gl518sm, fscher support
123           Fix 2.6 negative voltages handling
124           Temporary fix to w83l785ts mappings
125  Module adm1025: Separate prefix for NE1619
126  Module adm1026: Remove use of temporary ID
127                  Define addresses as a range
128  Module bmcsensors: Fix reservations
129  Module fscher: Externalize voltage conversions
130  Module eeprom: Remove memtype
131  Module i2c-piix4: Fix resource release error
132                    Various cleanups
133  Program decode-vaio.pl: Add sysfs support
134  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
135                   Drop linux 2.2 support
136                   Add w83627hf
137  Program sensors: Do not show algorithm by default
138                   Cleanup temperature unit display code
139                   Cleanup label spacing code
140                   Fix output to UTF-8 terms (Marcel Sebek)
141                   Simplify gl518sm print
142                   Do not ignore errors in FSC chips prints
143                   Fix w83l785ts print
144                   Cleanup FSC chips prints
145  Program sensors-detect: Fix PATH issues
146                          Correctly point to the fscher driver
147 
148
1492.8.3 (20040115)
150  File lm_sensors.spec: Update
151  Library: Add 2.6 eeprom, lm90 support
152           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
153  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
154  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
155  Module i2c-amd756: Fix byte writes
156  Module i2c-tsunami: Cleanups (Daniel Nilsson)
157  Module it87: Fix sg_tlx writes; fix sensor type reporting;
158               add 8712 Super I/O detection;
159               remove initialization of temp_type and fan_ctl;
160               remove init and temp_type module parameters
161  Module lm90: Handle hysteresis differently
162  Module smartbatt: Fix detection, magnitudes, temp
163  Module w83781d: Fix negative voltages
164  Module w83l785ts: New
165  Program eeprog: Make 8 bit mode the default
166  Program fancontrol: Improvements, fixes, support 2.6 kernels
167  Program mkpatch: Add lm75.h
168  Program pwmconfig: Improvements, fixes, support 2.6 kernels
169  Program sensors: Add ASB100 support
170  Program sensors-detect: Add 8712 Super I/O detection;
171                          add W83L785TS detection
172
173
1742.8.2 (20031211)
175  IMPORTANT: Limit initialization removed from all chip drivers!
176             If you didn't run 'sensors -s' in the past you may need to now!
177  File sensors.conf.eg: Change lm75 scaling back to 1;
178                        Add example for asb100
179  Library: Fix bmcsensors scaling, increase number of sensors;
180           Add w83627thf support; Advance version to 3.0.0;
181           Add hermes, ADM1032, ASB100 support;
182           Add it87 sensor type support;
183           Add sysfs support for kernel 2.6;
184           Fix memory leaks
185  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
186             Fail if no kernel .config file exists;
187             Don't build module dependencies for user and user_install
188  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
189          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
190          smsc47m1, thmc50, via686a, w83627hf, w83781d:
191          Remove initialization of limits by driver.
192  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
193  Modules (chip): Init cleanups
194  Module asb100: New
195  Module bmcsensors: Fix voltage scaling, voltage and fan limits
196  Modules ddcmon, eeprom: Add failure printks
197  Module fscher: New (Fujitsu-Siemens Hermes driver)
198  Module i2c-amd756: Fix AMD8111 support
199  Module i2c-amd8111: Fix byte writes
200  Module i2c-nforce2: Fix byte writes
201  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
202  Module i2c-sis630: Sync with 2.6.0-X driver version
203  Module i2c-viapro: Add support for Via 8237
204  Module it87: Add pwm and "smart guardian" support;
205               add it87 sensor type support
206  Module lm75: Fix negative voltages
207  Module lm90: Add ADM1032 support
208  Module w83781d: Fix 791d and 627hf detection
209  Module w83627hf: Add VID support
210  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
211  Program eeprog: New
212  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
213                                       support sysfs for i2c bus search
214  Program i2cdetect: Add -l option to list busses
215  Program i2cdump: Add 'c' mode for consective address reads
216  Program mkpatch: Cleanups
217  Program pwmconfig: Handle multiple fans controlled by a single pwm
218  Program sensord: Remove ddcmon support
219  Program sensors: Add ADM1032 support; add messages for sysfs
220  Program sensors-detect: Prefer Super I/O drivers;
221                          Fix W83627HF and W83791D detection; detect CSB6;
222                          Detect ADM1029, ADM1030, ADM1031;
223                          Detect W83637HF, W83697UF;
224                          Add it87 sensor type support; add sysfs support
225                          Reduce lm80 misdetects; remove PCFxxxx "detection"
226                          Detect VT8237 (KT600)
227                          Use VPD instead of DMI+ACPI for Thinkpad detection
228                          Suggest new asb100 driver instead of w83781d
229
230
2312.8.1 (20031005)
232  NOTE: Requires i2c-2.8.1 or newer!
233  File sensors.conf.eg: Improved adm1025 section
234                        Default temp labels for as99127f
235                        Improved lm83 section
236                        Better support for Asus A7V8X-X
237  File doc/chips/SUMMARY: Add SMSC manufacturer ID
238  File doc/chips/adm1025: Add decent documentation (almost new)
239  File doc/chips/lm83: Known motherboards list update, misc updates
240  Library: Change adm1025 names (hyst/over become low/high)
241           Swap adm1025 temp1 and temp2 to match the driver's order
242           Advance version to 2.0.1
243           Update lm83 support
244           Add support for lm90, xeontemp, max6650
245           Add separate messages for read and write errors
246           Add missing message for parse error
247  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
248  Modules (various): Fix includes for compilation on Alpha
249                     Use the new i2c_delay function instead of the various
250                     do_pause functions
251  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
252  Module i2c-nforce2: Cleanups
253  Module i2c-i810: Use readl/writel for portable access to PCI memory
254  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
255  Module i2c-savage4: Use readl/writel for portable access to PCI memory
256  Module i2c-sis630: Fix detection
257                     Add block data read/write support
258  Module i2c-sis645: Detection method change/bugfix
259  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
260  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
261  Module adm1025: Major driver update
262                  Add support for Philips NE1619
263                  Simplify the driver a lot (unified voltages, unified
264                  temperatures and much more)
265                  Fix default voltage limits
266                  Change default temperature limits
267                  Swap remote and local temperatures to match the internal
268                  registers order (make the code unification possible)
269                  Export remote diode fault through alarms
270  Module ddcmon: Major update
271                 Add half a dozen new features
272                 Add checksum parameter (same as for the eeprom module)
273                 Fix monitor limits
274  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
275  Module lm78: Fix a fan_div/fan_min bug
276  Module lm83: Add t_crit and alarms support
277  Module lm90: New
278  Module max6650: New
279  Module saa1064: New
280  Module smsc47m1: Add support for 47M142
281  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
282                   enhance w83627thf support
283  Module w83781d: Enhance chip detection; clean up error returns;
284                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
285  Module xeontemp: New
286  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
287                           Mark Rambus as unsupported
288  Program decode-edid.pl: New
289                          Interfaces between our eeprom module and
290                          parse-edid from the read-edid project
291  Program p4b_smbus: Fix SMP compilation
292  Program sensord: Add support for IT87 (Mike Black)
293                   Change ADM1025 support to match the changes made to
294                   the library
295  Program sensors: Rewrite and enhance EEPROM support
296                   Change LM83 and ADM1025 support to match the changes
297                   made to the library
298                   Add DRDRAM support to print_eeprom
299                   Exit(1) on /proc write failure (Malte Starostik)
300                   Add LM90, MAX6650 support
301  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
302                          Add support for LM82, LM86, LM89
303                          Improved W83781D family detection
304                          Add support for AS19927F rev.2, ASB100 Bach
305                          Add support for Asus Mozart-2 (3 types)
306                          Add support for NE1619
307                          Add support for FSC Hermes
308                          Make sure /sbin is in the user's path
309                          Fix EEPROM detection
310                          Automatic module.conf and /dev/i2c* detection
311                          Improve LM82 and LM83 detection
312                          Handle "to-be-written" cleanly
313                          Add detection for 47M14x Super I/O
314                          Handle the one-address-many-chips-same-driver
315                          case
316
317                         
3182.8.0 (20030714)
319  NOTE: Requires i2c-2.8.0 or newer!!!
320  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
321                  2.4.13 or later required for mkpatch.
322  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
323                  i2c package
324  File doc/chips/fscscy: Add watchdog documentation
325  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
326  File sensors.h: Now automatically generated
327  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
328           add adm1026, lm83, lm85, w83791d support;
329           Advance version to 2.0.0
330  Makefiles: Generate warnings if new library won't be found by ld.so;
331             Modules now install in kernel/drivers/i2c/[busses,chips];
332             Ensure that headers in /usr/local/include are used first;
333             Don't use /usr/include headers for modules;
334             Handle multiple UTS_RELEASE definitions in linux/version.h;
335             Automatically generate kernel/include/sensors.h;
336             Remove old gzipped modules; remove old misc directory if empty;
337             Remove pre-2.4 installation method;
338             -Wall now the default;
339             Add new targets user, user_install, and help;
340             Run depmod after module installation
341  Modules (all): Cleanups including
342                - Add #include <i2c-proc.h>
343                - C99 initializers
344                - Remove #ifdef MODULE
345                - Remove #ifndef THIS_MODULE
346                - Remove #ifndef MODULE_LICENSE
347                - Remove other 2.1/2.2 #ifdefs
348                - Remove #include "sensors.h", copy SYSCTL defs to module
349                - Remove excess #includes
350                - Remove argument in i2c_register_entry()
351                - Remove dummy xxx_command() definition
352                - Remove EXPORT_NO_SYMBOLS
353                - Remove init_MUTEX #define
354                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
355                  no longer adjust their own refcounts
356                - Use module_init() and module_exit()
357                - Update to new i2c_driver struct definition
358  Modules (bus PCI): Convert to PCI-module-style initialization
359  Modules (several): Add support for AMD Opteron VRM (VID) encoding
360  Module adm1021: Set alarm on failed reads and report old value;
361                  merge changes from kernel 2.5.54
362  Module adm1026: New
363  Module bmcsensors: Fix compile when DEBUG=1
364  Modules ddcmon, eeprom: Use i2c block reads if possible;
365                          better error handling
366  Module ds1307: Add to Makefile
367  Module gl520sm: Fix temperature over/hyst writes
368  Module lm75: merge changes from kernel 2.5.54
369  Module lm83: New
370  Module lm85: New
371  Module i2c-ali1535: Check for invalid transaction
372  Module i2c-ali15x3: Check for invalid transaction
373  Module i2c-amd756: merge changes from kernel 2.5.54;
374                     check for invalid transaction
375  Module i2c-amd8111: merge changes from kernel 2.5.54
376  Module i2c-i801: Add support for 82801EB (ICH5)
377  Module i2c-i810: Fix for some chips
378  Module i2c-nforce2: New
379  Module i2c-piix4: Check for invalid transaction
380  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
381  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
382        north bridges; SiS962 and SiS963 south bridges
383  Module i2c-viapro: Check for invalid transaction
384  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
385          pwm and pwm enable support; update docs
386  Module smbus-arp: Check adapter for HW or SW PEC support;
387                    add reset option
388  Module w83781d: Add support for w83791d
389  Module w83627hf: New
390  Program decode-dimms.pl: Recognize DDR and Rambus
391  Program eeprom: Fix writes for small eeproms
392  Program eeprom, eepromer: Use local i2c-dev.h for build
393  Program fancontrol: New
394  Program lm_sensors.init: Call sensors -s in start()
395  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
396                   Add adm1026,lm85 support;
397                   Remove sensors.c file; add sensors_compat.h;
398                   Remove patches to i2c-core.c and drivers/char/mem.c;
399                   Now works only for kernels 2.4.13 or later
400  Program p4b_smbus: Fix 'make install';
401                     Install in same place as other modules;
402                     Clear correct bits in config word
403  Program pwmconfig: New
404  Program sensors: add adm1026, lm85, w83791d support
405  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
406                          w83627hf, w83627thf, w83697hf);
407                          Add support for SiS651, SiS961, SiS745, SiS746;
408                          Support dmidecode 2.0 and later;
409                          Fix "C" format error;
410                          Add support for adm1026, 82801EB (ICH5), W83791D;
411                          Add support for w83l785ts, nForce2;
412                          Fix UTF-8 incompatibility;
413                          Better support for lm75;
414                          Add support for lm83
415
4162.7.0 (20021208)
417  NOTE: Requires i2c-2.7.0 or newer.
418  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
419  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
420  File doc/busses/i2c-sis645: Add license
421  File doc/chips/lm92: Add license, features
422  File doc/chips/maxilife: Add license, parameters, features
423  File doc/chips/smartbatt: Complete rewrite
424  File doc/chips/vt8231: Add license, parameters
425  File sensors.conf.eg: Add section for lm75; complete the lm78 section
426  Library: Add support for MC1066; add multiple VRM version support for lm87;
427           enhance adm1023 support; initial support for Sony Vaio eeprom;
428           add support for bmcsensors; add hacks for additional dummy drivers
429  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
430            add flags for x86_64 compiles
431  Module adm1021: Add support for MC1066
432  Module bmcsensors: New       
433  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
434                   kernel 2.5.43; fix 2.2 kernel compiles
435  Module gl518sm: Iterate allowed only for rev 0x00
436  Module i2c-amd756: Configure base address for nForce support;
437                     check for uninitialized base address;
438                     add support for amd8111 (SMBus 1.0)
439  Module i2c-amd8111: New (SMBus 2.0)
440  Module i2c-ipmb: New
441  Module i2c-ipmi: New
442  Module i2c-keywest: Sync with kernel 2.4.20
443  Module i2c-sis630: Add support for SiS730
444  Module i2c-sis645: Improve support for SiS645/961;
445                     add support for SiS645DX/961 and SiS735;
446                     fix 2.2 kernel compiles
447  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
448  Module lm87: Add multiple VRM version support
449  Module vt1211: Fix inx limits and alarms; fix in0
450  Module vt8231: Fix inx limits and alarms; fix in0
451  Module w83781d: Fix in0/in1 initialization
452  Module smartbatt: New
453  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
454  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
455                           stop decoding on checksum error
456  Program dmidecode: Fix read bug; upgrade to version 1.8
457  Program doc-insmod: Complete rewrite; fix author output
458  Program doc-features: Complete rewrite; handle missing sysctl entries;
459                        handle unknown prefix with suggestion
460  Program lm_sensors.init: Remove spaces bug; add green/red output
461  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
462  Program rrd: Add sanity limits to newly-created RRD.
463  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
464  Program sensors: Add support for MC1066, Rambus Rimms;
465                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
466                   initial support for Sony Vaio eeprom
467  Program sensors-detect: Add support for MC1066, smart battery, 8235,
468                          IPMI, AMD8111; add help if no sensors found;
469                          add ACPI method for IBM system detection;
470                          work with old Perl versions again;
471                          initial support for Sony Vaio eeprom
472
4732.6.5 (20020915)
474  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
475  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
476  Library: Fix fan3_div writes for w8378* and it87; add vt8231
477  Module dmi_scan: new
478  Module ds1621: Fix enable/disable
479  Module eeprom: Do not corrupt 24RF08's when checksum=1
480  Module i2c-i801: Check for uninitialized base address;
481                   enable if not enabled
482  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
483  Module i2c-sis630: new
484  Module i2c-sis645: new
485  Module lm92: Fix in-kernel initialization
486  Module via686a: Remove VT8231 support
487  Module vt8231: new
488  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
489  Program dmidecode: new
490  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
491  Program mkpatch: Add Config.in entries for, lm92,
492                   pcf8574, pcf8591, smsc47m1, vt1211;
493                   add dmi_scan
494  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
495  Program lm_sensors.init: fix stop()
496  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
497                   add support for logging loadavg in RRD;
498                   fix down-converting raw labels for RRD;
499                   update chip support, still behind sensors
500  Program sensors: Add /usr/local/etc to config file path;
501                   fix -c and -u flags; add vt8231
502  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
503                          refuse to run on IBM systems;
504                          fix sysconfig module numbering;
505                          change quick write to not corrupt 24RF08's
506
5072.6.4 (20020719)
508  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
509  File doc/vid: New
510  File include/sensors_vid.h: New
511  File sensors.conf.eg: Add vt1211, smsc47m1
512  Library: Add multiple VRM version support for adm1025, w83781d;
513           fix 'flex scanner jammed' on some systems;
514           add vt1211, smsc47m1, lm92;
515           fix access mode checking
516  Makefiles: For 2.4+ kernels, modules now install in
517             kernel/drivers/[i2c,sensors] , not misc/ , and
518             'make install' removes old versions in misc/ .
519             Use $CFLAGS and $CPPFLAGS if defined.
520  Module adm1025: Add multiple VID version support
521  Module ds1307: new
522  Module i2c-amd756: Add nVidia nForce support; fix block read length;
523                     reliability improvements
524  Module i2c-hydra: Flush posted writes
525  Module i2c-i801: Add support for 82801DB (ICH4)
526  Module i2c-i810: Flush posted writes
527  Module i2c-savage4: new
528  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
529  Module i2c-voodoo3: Flush posted writes
530  Module ds1307: New
531  Module lm92: New
532  Module smbus-arp: new
533  Module smsc47m1: new
534  Module via686a: Add support for VT8231 sensors
535  Module vt1211: new
536  Module w83781d: Add multiple VID version support; fix temp alarms
537  Program eeprom: new
538  Program i2cdump: Add smbus block command specification, add PEC support
539  Program lm_sensors.init: new
540  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
541                   pcf8574, pcf8591, smsc47m1, vt1211
542  Program p4b_smbus: Add support for ICH4
543  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
544  Program sensord.init: Renamed, was prog/init/sensors
545  Program sensord: Major update, now requires rrd source;
546                   not compiled by default
547  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
548                   (don't display algo. and adap.) option;
549                   add vt1211, smsc47m1, lm92
550  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
551                          add 82801DB, LM85; fix perl warnings;
552                          generate /etc/sysconfig/lm_sensors for
553                          lm_sensors.init script
554
5552.6.3 (20020322)
556  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
557  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
558  File doc/chips/it87: add more temp_type help
559  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
560                        add adm1021 section; add lm87 AIN[1,2] template;
561                        swap negative voltage limits for 782d,783s,627hf,
562                        697hf,it87; add more it87 help; swap neg. voltage
563                        limits for lm78(-j), lm79, w83781d, as99127f
564  Library: Add PCF8591, W83697HF, ADM1023 support;
565           fix w83* fan_min computes;
566           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
567  Module adm1024: Add MODULE_LICENSE("GPL")
568  Module bt869: Add s-video out and DVD resolution support
569  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
570  Module fscscy: implement min/max for voltages and fans
571  Module i2c-amd756: Add support for AMD768
572  Module i2c-i810: Add support for 810E
573  Module i2c-keywest: Big update, sync with kernel 2.4.18
574  Module i2c-piix4: Check for uninitialized base address
575  Module i2c-sis5595: Blacklist 645, 735
576  Module i2c-viapro: Check for uninitialized base address
577  Module gl518sm: Standardize /proc entries in0-3
578  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
579               fan -> fan1; fix temp2 limit writes
580  Module pcf8574: Add support for PCF8574A; /proc interface changed
581  Module pcf8591: new
582  Module sis5595: Blacklist 645, 735
583  Module w83781d: Add W83697HF support; allow force_subclients parameter
584                  for Tyan 2460
585  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
586  Program decode-vaio.pl: new
587  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
588                   add text output
589  Program init/sensors: New SysV init script
590  Program mkpatch.pl: Add support for fscscy, add more help entries
591  Program p4b_smbus: new
592  Program rrd: Install summ_week.cgi
593  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
594                   clean up chassis intrusion prints
595  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
596                          fix Via686a and it87 detection;
597                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
598                          fix uninitialized values; it87 beats lm78
599
6002.6.2 (20011118)
601  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
602  Chip Modules (all): malloc.h -> slab.h
603  Modules (all): Add MODULE_LICENSE("GPL")
604  File doc/FAQ: More updates and additions
605  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
606  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
607           update it87 alarm ID's.
608  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
609  Module fscscy: new (Fujitsu-Siemens Scylla driver)
610  Module i2c-amd756: Improve busy handling/printk's
611  Module i2c-i801: Add 82801CA/CAM support
612  Module i2c-keywest: Sync with PPC people, it works now
613  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
614  Module i2c-viapro: Add Via VT8233 support
615  Module it87: Merge alarm_* /proc entries to alarms
616  Module sis5595: Fix support for rev B0
617  Module via686a: Make limit initializations reliable
618  Module w83781d: Allow init=0 parameter to bypass initialization
619  Program isadump: Add flat address space (PCI) support
620  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
621                      fscpos, it87, maxilife, mtp008
622  Program sensors: Fix w83781d temp precision
623  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
624                          Fujitsu Poseidon and Scylla, 
625                          Intel 82443MX and 82801CA/CAM detection,                     
626                          add ITE 8172G detection (driver in kernel 2.4.10)
627
6282.6.1 (20010830)
629  File BUGS: Updated
630  File doc/FAQ: More updates and additions
631  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
632  File sensors.conf.eg: Fix/enhance it87 section
633  Library: ds1621 and it87 updates
634  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
635  Module i2c-amd756: Add AMD 766 support
636  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
637  Module i2c-piix4: Add Serverworks CSB5 support
638  Module i2c-sis5595: Recognize unsupported chips and refuse to load
639  Module adm1025: Fixed temp2 min/max writes
640  Module ds1621: Add 12-bit precision mode
641  Module it87: Enable all alarms, add in8 support, add sensor type selection
642  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
643                  remove support for module
644  Module sis5595: Recognize unsupported chips and refuse to load
645  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
646  Program eepromer: new
647  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
648                      of sensors.c as a module in kernel
649  Program sensors: it87 updates; adjust temp. precision for some chips
650  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
651                          recognize unsupported SiS chips;
652                          recognize AMD 766 and Serverworks CSB5.
653
6542.6.0 (20010612)
655  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
656        If your make fails because it can't find <linux/i2c-proc.h>, you
657        forgot this step!!!
658  File doc/FAQ: Many, many updates and additions
659  File doc/busses/i2c-sis5595: new
660  File doc/busses/i2c-tsunami: new
661  File doc/chips/it87: new
662  File doc/chips/via686a: Claim support for 686b.
663  File README.thinkpad: new
664  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
665                        Add lm87, adm9240, ds1780, lm81 templates;
666                        Enhance help comments in file;
667                        Add Tyan S2510 dual-MTP008 example;
668                        Make separate sis5595 section.
669  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
670  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
671  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
672           Add support for maxilife-nba and amd1024;
673           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
674  Chip Modules (all ISA): Remove #include "i2c-isa.h"
675  Chip Modules (all): Change from sensors_* to i2c_* globals
676                      for new i2c-proc.[ch]
677  Makefiles: enhance to support Alpha architecture
678  Module adm1021: Fix lm84 and gl523sm support
679  Module adm1024: new
680  Module i2c-i801: Chip detection cleanup
681  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
682  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
683  Module i2c-tsunami: New
684  Module i2c-via: Ensure i2c bus is tristated correctly.
685  Module it87: new driver for IT8705, IT8712, Sis950 chips
686  Module lm78: Recognize chipid=0x20
687  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
688  Module mtp008: Fix temp initializations;
689                 Save BIOS pin configuration of temps and fans;
690                 Fix sensor type reads/writes and fan min writes;
691                 Fix spurious invalid sensor type messages
692  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
693                  used for patched kernel now.
694                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
695  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
696                  Allow force_addr=0xaddr
697  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
698  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
699                  reading changes; Add messages for subclient
700                  registration failure
701  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
702  Program i2cset: new
703  Program isadump: fix for Alpha arch. compiles
704  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
705                      Remove ltc1710; Fix i2c_sis5595 typo;
706                      Support kernel 2.4.5 makefile change;
707                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
708  Program sens_update_rrd: new
709  Program sensord: Add -d (debug) and -p (pid-file) options
710  Program sensors: Change reported version from 1.3 to the lm_sensors version;
711                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
712                   Change mtp008 temps from max/min to limit/hyst;
713                   Add maxilife-nba, adm1024, it87 support.
714  Program sensors-detect: Recognize lm78 with chipid=0x20;
715                          Recognize SMSC Victory66 South Bridge;
716                          Add devfs /dev/i2c/x support;
717                          Add adm1024, it87xx support; Add thinkpad warning.
718  Program tellerstats: new
719
7202.5.5 (20010115)
721  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
722        you have kernel 2.4.0-prerelease or greater.
723  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
724  File doc/developers/proc: new
725  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
726  Library: Add ds1621, mtp008 support
727  Module adm1021: Add support for adm1021a / adm1023
728  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
729  Module adm1025: Add support for remote temp; rename /proc entries to
730                  in[0-5] and temp[1-2]; fix negative temp readings
731  Module adm9240: Rename /proc entries to in[0-5]
732  Module ddcmon: allow force and force_ddcmon parameters
733  Module ds1621: new
734  Module i2c-ali1535: Enhance error checking and recovery; add mutex
735  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
736  Module i2c-piix4: add support for ServerWorks southbridge OSB4
737  Module lm87: cleanup, update voltage calculations
738  Module mtp008: new
739  Module pcf8574: change update time to 5 seconds
740  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
741  Module w83781d: fix beep setting via /proc
742  Programs editticket, readticket: new
743  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
744  Program mkpatch.pl: more fixes; now adds many more modules
745  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
746                   add adm1025 temp2; report temp limits correctly as
747                   min/max or limit/hysteresis; print message if no
748                   sensors are found. Removed false errors from lm87 reads.
749  Program sensors-detect: Add ds1621, mtp008 detection;
750                          add ServerWorks detection
751
7522.5.4 (20001012)
753  Module i2c-viapro: Add support for Via 596B (0x3051)
754  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
755  Program mkpatch.pl: fixed infinite loop
756  Program sensors-detect: Detect Via 596B (0x3051)
757
7582.5.3 (20001008)
759  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
760  File useful_addresses.html: update
761  Library: Add lm87 support
762  Module pcf8574: new
763  Module i2c-ali1535: new
764  Module i2c-ali15x3: removed force #ifdef.
765  Module i2c-i801: support Intel 82801BA (815E chipset)
766  Module i2c-i801: add i2c block write support, fix smbus block bugs
767                   (requires i2c 2.5.3 package)
768  Module i2c-i810: support Intel 82815
769  Module lm87: new
770  Module sensors: Fix for kernel 2.4.0-test8
771                  (remove copy_to_user_ret and put_user_ret)
772  Module w83781d: limit fan divisors to 8 max. for as99127f
773  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
774  Program i2cdump: Add smbus block read support
775  Programs i2cdetect, i2cdump: Improve error reporting
776  Program sensors: new switch -u (--unknown)
777  Program sensors-detect: detect Intel 82801BA (815E chipset)
778  Program sensors-detect: detect Intel 82815
779  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
780  Program sensors-detect: detect National LM87
781  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
782  Program sensors-detect: Improve error reporting
783
7842.5.2 (20000709)
785  File sensors.conf.eg: Fix lm80 in8 calculation
786  Module w83781d: W83783S no longer crashes on unloading
787  Program sensors-detect: more robustness in case of unknown i2c adapters
788  Program sensors-detect, libsensors: fix eeprom size reporting
789  Program sensord: more flexibility, support for alarm scanning etc.
790  Program sensors: support for ignore setting on sensor alarms.
791  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
792
7932.5.1 (20000618)
794  Library: Add adm1025 support
795  Module adm1025: new
796  Module ddcmon: Fixed bus scan which could hang SMBus
797  Module i2c-keywest: new
798  Module maxilife: Add support for Maxilife '99 (NBA)
799  Module via686a: Enable sensors if not enabled by BIOS
800  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
801  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
802  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
803  Module w83781d: Fis as99127f fan speed (was 66% too high)
804  Module w83781d: Improve beep input checking
805  Program i2cdump: Add Winbond-style bank selection
806  Program isadump: Add Winbond-style bank selection
807  Program sensors: Add adm1025 support.
808  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
809  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
810  File sensors.conf.eg: Add Maxilife '99 entries
811  File sensors.conf.eg: Remove some as99127f entries.
812    Note: For as99127f, reinstall sensors.conf.eg manually (make install
813          won't reinstall it) or else 'sensors -s' will fail.
814
8152.5.0 (20000312)
816  Dropped all kernel 2.0 and 2.1 compatibility
817  Module i2c-i810: new
818  Module ddcmon: new
819  Module via686a: new
820  Module i2c-amd756: fixed region request
821  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
822  Module w83781d: Don't change pin settings at initialization;
823                  also fix chip detection.
824  Library: Support for ddcmon and via686a
825  Program sensors-detect: Support for ddcmon and via686a
826  Program sensors: Support for eeprom, ddcmon and via686a
827
8282.4.5 (20000116)
829  Introduced DESTDIR installation prefix
830  Module lm80: fixes, temperature now read and set correctly
831  Module i2c-voodoo3: driver enhancements
832  Module w83781d: fixes, AS99127 works much better now
833  Library: New ignore keyword in config file
834  Programs: Support for new ignore keyword
835  Program sensors-detect: Support for MGA detections
836
8372.4.4 (19991201)
838  Addition of the alpha release of AMD 756 SMBus host support.
839  Many fixes and updates to the gl518sm driver
840  Updates and fixes for device detection
841
8422.4.0 (19990920)
843  Too much to list.
844  i2c and smbus parts are split off to a separate i2c package.
845  New drivers and other stuff.
846
8472.3.4 (19990616)
848  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
849  All: Now compiles against kernel 2.0.x (again ;)
850  Module gl518sm: some updates and refinements
851
8522.3.3 (19990603)
853  All: Now compiles against kernel 2.3.x (x >= 1)
854  Module i2c-voodoo3: Timing issue fixes
855  Module bt869: Seems to be functional and relatively well tested
856  Many modules were modified to be more compatible with the new
857   Mutex structure in the new experimental kernels.
858
8592.3.2 (19990507)
860  Module i2c-hydra: Now compiles on 2.0.x kernels
861  Module i2c-lm75: Slightly better detection
862  * New, but not compiled by default:
863  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
864  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
865
8662.3.1 (19990501)
867  All: Now compiles on PPC
868  Module i2c-hydra: NEW
869  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
870  Module w83781d: Removed deadlock (mutex was not initialized)
871  Documentation: A few glitches removed
872  Makefile: default module installation directory is now
873            /lib/modules/current/extra/misc
874  Program sensors-detect: PPC Hydra now detected
875  Program sensors: Now prints complete GL518SM information
876  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
877
8782.3.0 (19990422)
879  All: Many, many changes and improvements
880  All: Many small bugs and problems removed
881  Modules: New insmod parameters
882  Modules: Much improved chip detection
883  Module maxilife: NEW
884  Module adm1021: MAX1617A now also supported
885  Module adm9240: DS1780 now also supported
886  Module w83781d: W83782D and W83783S now also supported
887  Program sensors-detect: NEW
888  Library: All chips now supported
889  Documentation: Very much improved
890
8912.2.2 (199903??)
892  Just some minor updates and bug fixes.
893
8942.2.1 (19990218)
895  All: Removed compile warnings
896  Module i2c-dev: Small bug removed if DEBUG=1 was used
897  Module sis5595: Now compiles for 2.0 kernels
898  Module adm1021: Detection corrected
899 
9002.2.0 (19990216)
901  All: Set copyrights to include 1999
902  All: Small bugfixes
903  I2C: Upgraded to newest archive of Simon Vogl
904  Module i2c-dev: NEW
905  Module i2c-ali15x3: NEW
906  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
907     directories, and somewhat improved
908  Module sis5595: NEW
909  Modules: Renamed all bus modules to i2c-*, new directory lay-out
910  Library: Support for new chip drivers, several small bugs fixed
911  Library manual pages: NEW
912  Program i2cdetect: Moved to detect directory
913  Program detect.pl: NEW
914  Program doc-features: NEW
915  Program sensors: Added man-page
916  Document BUGS: Added cdrom bug and kernel i2c conflict
917 
9182.1.2 (19990116)
919  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
920  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
921  Documentation in doc/kernel: NEW
922
9232.1.1 (19990107)
924  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
925                     and older
926  Module gl518sm.o: Miscelaneous bugs and problems solved
927  Program isadump: NEW
928
9292.1.0 (19981230)
930  Library: Completely NEW
931  Program sensors: NEW
932  Program grab_busses: NEW
933  Program decode-dimms: More information
934  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
935  Module w83781d.o: NEW
936  Module lm80.o: NEW
937  Module gl518sm.o: new procfile beep, several small updates
938  Modules: Now use pin readings, no more scaling within the kernel (use the
939           library instead)
940 
9412.0.2 (19981214)
942  Module eeprom.o: NEW
943  Program decode-dimms: NEW
944  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
945           2.1.58
946  Modules: Somewhat less verbose on transfers
947  Module lm78.o now recognizes and handles lm78-j and lm79
948
9492.0.1 (1998121?)
950  Module gl518sm.o updates, to make it actually work
951  Module lm75.o high/low-byte swapping write bug fixed
952
9532.0.0 (19981209)
954  Initial release
Note: See TracBrowser for help on using the browser.