| 1 | lm_sensors CHANGES file |
|---|
| 2 | ----------------------- |
|---|
| 3 | This is a list of the most important changes in 2.x versions. It is by |
|---|
| 4 | no means complete, listing only the most significant changes. |
|---|
| 5 | The ultimate way to know what has changed is to run diff, or even neater, |
|---|
| 6 | ask CVS about it: |
|---|
| 7 | |
|---|
| 8 | * Checkout the archive (see doc/cvs for how you can do this) |
|---|
| 9 | * Determine which tags are valid, by running this command from the |
|---|
| 10 | project root directory: |
|---|
| 11 | cvs status -v -l Makefile |
|---|
| 12 | Valid tags are usually of the form V2-1-0 for version 2.1.0 |
|---|
| 13 | * Ask cvs for the difference between two versions: |
|---|
| 14 | cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS |
|---|
| 15 | for example: |
|---|
| 16 | cvs diff -r V2-0-0 -r V2-0-1 -u |
|---|
| 17 | |
|---|
| 18 | ----------------------------------------------------------------------------- |
|---|
| 19 | |
|---|
| 20 | 2.8.5 (20040305) |
|---|
| 21 | File doc/chips/SUMMARY: Update |
|---|
| 22 | File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos) |
|---|
| 23 | Makefiles hotplug and rrd: Remove -o and -g arguments to install |
|---|
| 24 | Module bmcsensors: Increase max SDRs to 100 |
|---|
| 25 | Module fscher: Rename fanN_min to pwmN (Reinhard Nissl) |
|---|
| 26 | Module i2c-amd756: Don't register driver to avoid driver conflicts. |
|---|
| 27 | (Daniel Rune Jensen) |
|---|
| 28 | Module it87: Better temperature sensor types handling (Takeru Komoriya) |
|---|
| 29 | Fix reset=1 (Takeru Komoriya) |
|---|
| 30 | Module lm80: Code cleanups |
|---|
| 31 | Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1 |
|---|
| 32 | Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1 |
|---|
| 33 | Module w83627hf: Add w83637hf support |
|---|
| 34 | Fix exported name |
|---|
| 35 | Fix PWM in w83627thf |
|---|
| 36 | Preserve other bits when forcing temp2/3 to comparator mode |
|---|
| 37 | Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode |
|---|
| 38 | Remove asb100 support |
|---|
| 39 | Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp: |
|---|
| 40 | Define driver ID if i2c-id.h doesn't have it yet. |
|---|
| 41 | Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595: |
|---|
| 42 | Backport oops fix from Linux 2.6. |
|---|
| 43 | Modules (all chips): Get rid of useless headers |
|---|
| 44 | Program decode-edid.pl: Add sysfs support |
|---|
| 45 | Program sensors: Add w83637hf support |
|---|
| 46 | Add support for Shuttle Ethernet EEPROMs |
|---|
| 47 | Drop 2.6 subclient detection |
|---|
| 48 | Program sensors-detect: Add heuristics to the LM80 detection function |
|---|
| 49 | Add support for W83L785R, improve W83L784R/AR |
|---|
| 50 | Add GeForce FX 5600 as supported by rivatv |
|---|
| 51 | More Super IO chips, better handling |
|---|
| 52 | Library: Update to match renames in fscher |
|---|
| 53 | Reverse temporary changes to w83l785ts mappings |
|---|
| 54 | Fix vt1211 and vt8231 uch_config not being writable |
|---|
| 55 | Add 2.6 lm80 support |
|---|
| 56 | Add w83637hf support |
|---|
| 57 | Remove in6 and temp1 from vt1211 and vt8231 |
|---|
| 58 | Add support for Shuttle Ethernet EEPROMs |
|---|
| 59 | Remove unused as99127f features |
|---|
| 60 | |
|---|
| 61 | |
|---|
| 62 | 2.8.4 (20040207) |
|---|
| 63 | File doc/lm_sensors-FAQ.texi: Update 4.20. |
|---|
| 64 | File doc/chips/it87: Change hyst to low |
|---|
| 65 | File doc/chips/w83l785ts: New |
|---|
| 66 | File etc/sensors.conf.eg: Change it87 hyst to low |
|---|
| 67 | Fix w83697hf supposed to have temp3 |
|---|
| 68 | Limits initialization for adm1025/ne1619 |
|---|
| 69 | Handle fscher voltage conversions |
|---|
| 70 | Add Tyan Trinity S2495 KT400 setup (Eric |
|---|
| 71 | Schumann) |
|---|
| 72 | Fix fscher fan labels (Reinhard Nissl) |
|---|
| 73 | Library: Better 2.6 eeprom support |
|---|
| 74 | Change it87 hyst to low |
|---|
| 75 | Add 2.6 gl518sm, fscher support |
|---|
| 76 | Fix 2.6 negative voltages handling |
|---|
| 77 | Temporary fix to w83l785ts mappings |
|---|
| 78 | Module adm1025: Separate prefix for NE1619 |
|---|
| 79 | Module adm1026: Remove use of temporary ID |
|---|
| 80 | Define addresses as a range |
|---|
| 81 | Module bmcsensors: Fix reservations |
|---|
| 82 | Module fscher: Externalize voltage conversions |
|---|
| 83 | Module eeprom: Remove memtype |
|---|
| 84 | Module i2c-piix4: Fix resource release error |
|---|
| 85 | Various cleanups |
|---|
| 86 | Program decode-vaio.pl: Add sysfs support |
|---|
| 87 | Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts |
|---|
| 88 | Drop linux 2.2 support |
|---|
| 89 | Add w83627hf |
|---|
| 90 | Program sensors: Do not show algorithm by default |
|---|
| 91 | Cleanup temperature unit display code |
|---|
| 92 | Cleanup label spacing code |
|---|
| 93 | Fix output to UTF-8 terms (Marcel Sebek) |
|---|
| 94 | Simplify gl518sm print |
|---|
| 95 | Do not ignore errors in FSC chips prints |
|---|
| 96 | Fix w83l785ts print |
|---|
| 97 | Cleanup FSC chips prints |
|---|
| 98 | Program sensors-detect: Fix PATH issues |
|---|
| 99 | Correctly point to the fscher driver |
|---|
| 100 | |
|---|
| 101 | |
|---|
| 102 | 2.8.3 (20040115) |
|---|
| 103 | File lm_sensors.spec: Update |
|---|
| 104 | Library: Add 2.6 eeprom, lm90 support |
|---|
| 105 | Fix 2.6 temp_hystX for 2.6.1-rc1 and later |
|---|
| 106 | Makefile: Update Alpha CMODFLAGS (Daniel Nilsson) |
|---|
| 107 | Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing |
|---|
| 108 | Module i2c-amd756: Fix byte writes |
|---|
| 109 | Module i2c-tsunami: Cleanups (Daniel Nilsson) |
|---|
| 110 | Module it87: Fix sg_tlx writes; fix sensor type reporting; |
|---|
| 111 | add 8712 Super I/O detection; |
|---|
| 112 | remove initialization of temp_type and fan_ctl; |
|---|
| 113 | remove init and temp_type module parameters |
|---|
| 114 | Module lm90: Handle hysteresis differently |
|---|
| 115 | Module smartbatt: Fix detection, magnitudes, temp |
|---|
| 116 | Module w83781d: Fix negative voltages |
|---|
| 117 | Module w83l785ts: New |
|---|
| 118 | Program eeprog: Make 8 bit mode the default |
|---|
| 119 | Program fancontrol: Improvements, fixes, support 2.6 kernels |
|---|
| 120 | Program mkpatch: Add lm75.h |
|---|
| 121 | Program pwmconfig: Improvements, fixes, support 2.6 kernels |
|---|
| 122 | Program sensors: Add ASB100 support |
|---|
| 123 | Program sensors-detect: Add 8712 Super I/O detection; |
|---|
| 124 | add W83L785TS detection |
|---|
| 125 | |
|---|
| 126 | |
|---|
| 127 | 2.8.2 (20031211) |
|---|
| 128 | IMPORTANT: Limit initialization removed from all chip drivers! |
|---|
| 129 | If you didn't run 'sensors -s' in the past you may need to now! |
|---|
| 130 | File sensors.conf.eg: Change lm75 scaling back to 1; |
|---|
| 131 | Add example for asb100 |
|---|
| 132 | Library: Fix bmcsensors scaling, increase number of sensors; |
|---|
| 133 | Add w83627thf support; Advance version to 3.0.0; |
|---|
| 134 | Add hermes, ADM1032, ASB100 support; |
|---|
| 135 | Add it87 sensor type support; |
|---|
| 136 | Add sysfs support for kernel 2.6; |
|---|
| 137 | Fix memory leaks |
|---|
| 138 | Makefiles: Install fancontrol, pwmconfig, decode-*.pl; |
|---|
| 139 | Fail if no kernel .config file exists; |
|---|
| 140 | Don't build module dependencies for user and user_install |
|---|
| 141 | Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm, |
|---|
| 142 | it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595, |
|---|
| 143 | smsc47m1, thmc50, via686a, w83627hf, w83781d: |
|---|
| 144 | Remove initialization of limits by driver. |
|---|
| 145 | Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding |
|---|
| 146 | Modules (chip): Init cleanups |
|---|
| 147 | Module asb100: New |
|---|
| 148 | Module bmcsensors: Fix voltage scaling, voltage and fan limits |
|---|
| 149 | Modules ddcmon, eeprom: Add failure printks |
|---|
| 150 | Module fscher: New (Fujitsu-Siemens Hermes driver) |
|---|
| 151 | Module i2c-amd756: Fix AMD8111 support |
|---|
| 152 | Module i2c-amd8111: Fix byte writes |
|---|
| 153 | Module i2c-nforce2: Fix byte writes |
|---|
| 154 | Module i2c-piix4: Add support for CSB6; add fix_hstcfg option |
|---|
| 155 | Module i2c-sis630: Sync with 2.6.0-X driver version |
|---|
| 156 | Module i2c-viapro: Add support for Via 8237 |
|---|
| 157 | Module it87: Add pwm and "smart guardian" support; |
|---|
| 158 | add it87 sensor type support |
|---|
| 159 | Module lm75: Fix negative voltages |
|---|
| 160 | Module lm90: Add ADM1032 support |
|---|
| 161 | Module w83781d: Fix 791d and 627hf detection |
|---|
| 162 | Module w83627hf: Add VID support |
|---|
| 163 | Program dmidecode: Remove (sensors-detect doesn't need it anymore) |
|---|
| 164 | Program eeprog: New |
|---|
| 165 | Programs i2cdetect, i2cdump, i2cset: add -v (version) option; |
|---|
| 166 | support sysfs for i2c bus search |
|---|
| 167 | Program i2cdetect: Add -l option to list busses |
|---|
| 168 | Program i2cdump: Add 'c' mode for consective address reads |
|---|
| 169 | Program mkpatch: Cleanups |
|---|
| 170 | Program pwmconfig: Handle multiple fans controlled by a single pwm |
|---|
| 171 | Program sensord: Remove ddcmon support |
|---|
| 172 | Program sensors: Add ADM1032 support; add messages for sysfs |
|---|
| 173 | Program sensors-detect: Prefer Super I/O drivers; |
|---|
| 174 | Fix W83627HF and W83791D detection; detect CSB6; |
|---|
| 175 | Detect ADM1029, ADM1030, ADM1031; |
|---|
| 176 | Detect W83637HF, W83697UF; |
|---|
| 177 | Add it87 sensor type support; add sysfs support |
|---|
| 178 | Reduce lm80 misdetects; remove PCFxxxx "detection" |
|---|
| 179 | Detect VT8237 (KT600) |
|---|
| 180 | Use VPD instead of DMI+ACPI for Thinkpad detection |
|---|
| 181 | Suggest new asb100 driver instead of w83781d |
|---|
| 182 | |
|---|
| 183 | |
|---|
| 184 | 2.8.1 (20031005) |
|---|
| 185 | NOTE: Requires i2c-2.8.1 or newer! |
|---|
| 186 | File sensors.conf.eg: Improved adm1025 section |
|---|
| 187 | Default temp labels for as99127f |
|---|
| 188 | Improved lm83 section |
|---|
| 189 | Better support for Asus A7V8X-X |
|---|
| 190 | File doc/chips/SUMMARY: Add SMSC manufacturer ID |
|---|
| 191 | File doc/chips/adm1025: Add decent documentation (almost new) |
|---|
| 192 | File doc/chips/lm83: Known motherboards list update, misc updates |
|---|
| 193 | Library: Change adm1025 names (hyst/over become low/high) |
|---|
| 194 | Swap adm1025 temp1 and temp2 to match the driver's order |
|---|
| 195 | Advance version to 2.0.1 |
|---|
| 196 | Update lm83 support |
|---|
| 197 | Add support for lm90, xeontemp, max6650 |
|---|
| 198 | Add separate messages for read and write errors |
|---|
| 199 | Add missing message for parse error |
|---|
| 200 | Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS |
|---|
| 201 | Modules (various): Fix includes for compilation on Alpha |
|---|
| 202 | Use the new i2c_delay function instead of the various |
|---|
| 203 | do_pause functions |
|---|
| 204 | Module i2c-ali15x3: Fix resource leak (Daniele Bellucci) |
|---|
| 205 | Module i2c-nforce2: Cleanups |
|---|
| 206 | Module i2c-i810: Use readl/writel for portable access to PCI memory |
|---|
| 207 | Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini) |
|---|
| 208 | Module i2c-savage4: Use readl/writel for portable access to PCI memory |
|---|
| 209 | Module i2c-sis630: Fix detection |
|---|
| 210 | Add block data read/write support |
|---|
| 211 | Module i2c-sis645: Detection method change/bugfix |
|---|
| 212 | Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov) |
|---|
| 213 | Module i2c-voodoo3: Use readl/writel for portable access to PCI memory |
|---|
| 214 | Module adm1025: Major driver update |
|---|
| 215 | Add support for Philips NE1619 |
|---|
| 216 | Simplify the driver a lot (unified voltages, unified |
|---|
| 217 | temperatures and much more) |
|---|
| 218 | Fix default voltage limits |
|---|
| 219 | Change default temperature limits |
|---|
| 220 | Swap remote and local temperatures to match the internal |
|---|
| 221 | registers order (make the code unification possible) |
|---|
| 222 | Export remote diode fault through alarms |
|---|
| 223 | Module ddcmon: Major update |
|---|
| 224 | Add half a dozen new features |
|---|
| 225 | Add checksum parameter (same as for the eeprom module) |
|---|
| 226 | Fix monitor limits |
|---|
| 227 | Module eeprom: Ignore Sony Vaio EEPROMs with a password set |
|---|
| 228 | Module lm78: Fix a fan_div/fan_min bug |
|---|
| 229 | Module lm83: Add t_crit and alarms support |
|---|
| 230 | Module lm90: New |
|---|
| 231 | Module max6650: New |
|---|
| 232 | Module saa1064: New |
|---|
| 233 | Module smsc47m1: Add support for 47M142 |
|---|
| 234 | Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms; |
|---|
| 235 | enhance w83627thf support |
|---|
| 236 | Module w83781d: Enhance chip detection; clean up error returns; |
|---|
| 237 | fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms |
|---|
| 238 | Module xeontemp: New |
|---|
| 239 | Program decode-dimms.pl: Add Direct Rambus (DRDRAM) |
|---|
| 240 | Mark Rambus as unsupported |
|---|
| 241 | Program decode-edid.pl: New |
|---|
| 242 | Interfaces between our eeprom module and |
|---|
| 243 | parse-edid from the read-edid project |
|---|
| 244 | Program p4b_smbus: Fix SMP compilation |
|---|
| 245 | Program sensord: Add support for IT87 (Mike Black) |
|---|
| 246 | Change ADM1025 support to match the changes made to |
|---|
| 247 | the library |
|---|
| 248 | Program sensors: Rewrite and enhance EEPROM support |
|---|
| 249 | Change LM83 and ADM1025 support to match the changes |
|---|
| 250 | made to the library |
|---|
| 251 | Add DRDRAM support to print_eeprom |
|---|
| 252 | Exit(1) on /proc write failure (Malte Starostik) |
|---|
| 253 | Add LM90, MAX6650 support |
|---|
| 254 | Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064 |
|---|
| 255 | Add support for LM82, LM86, LM89 |
|---|
| 256 | Improved W83781D family detection |
|---|
| 257 | Add support for AS19927F rev.2, ASB100 Bach |
|---|
| 258 | Add support for Asus Mozart-2 (3 types) |
|---|
| 259 | Add support for NE1619 |
|---|
| 260 | Add support for FSC Hermes |
|---|
| 261 | Make sure /sbin is in the user's path |
|---|
| 262 | Fix EEPROM detection |
|---|
| 263 | Automatic module.conf and /dev/i2c* detection |
|---|
| 264 | Improve LM82 and LM83 detection |
|---|
| 265 | Handle "to-be-written" cleanly |
|---|
| 266 | Add detection for 47M14x Super I/O |
|---|
| 267 | Handle the one-address-many-chips-same-driver |
|---|
| 268 | case |
|---|
| 269 | |
|---|
| 270 | |
|---|
| 271 | 2.8.0 (20030714) |
|---|
| 272 | NOTE: Requires i2c-2.8.0 or newer!!! |
|---|
| 273 | Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required; |
|---|
| 274 | 2.4.13 or later required for mkpatch. |
|---|
| 275 | File i2c-dev.h: Include userspace portion removed from i2c-dev.h in |
|---|
| 276 | i2c package |
|---|
| 277 | File doc/chips/fscscy: Add watchdog documentation |
|---|
| 278 | File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations |
|---|
| 279 | File sensors.h: Now automatically generated |
|---|
| 280 | Library: Add support for exponents and logarithms for vt1211/vt8235 temps; |
|---|
| 281 | add adm1026, lm83, lm85, w83791d support; |
|---|
| 282 | Advance version to 2.0.0 |
|---|
| 283 | Makefiles: Generate warnings if new library won't be found by ld.so; |
|---|
| 284 | Modules now install in kernel/drivers/i2c/[busses,chips]; |
|---|
| 285 | Ensure that headers in /usr/local/include are used first; |
|---|
| 286 | Don't use /usr/include headers for modules; |
|---|
| 287 | Handle multiple UTS_RELEASE definitions in linux/version.h; |
|---|
| 288 | Automatically generate kernel/include/sensors.h; |
|---|
| 289 | Remove old gzipped modules; remove old misc directory if empty; |
|---|
| 290 | Remove pre-2.4 installation method; |
|---|
| 291 | -Wall now the default; |
|---|
| 292 | Add new targets user, user_install, and help; |
|---|
| 293 | Run depmod after module installation |
|---|
| 294 | Modules (all): Cleanups including |
|---|
| 295 | - Add #include <i2c-proc.h> |
|---|
| 296 | - C99 initializers |
|---|
| 297 | - Remove #ifdef MODULE |
|---|
| 298 | - Remove #ifndef THIS_MODULE |
|---|
| 299 | - Remove #ifndef MODULE_LICENSE |
|---|
| 300 | - Remove other 2.1/2.2 #ifdefs |
|---|
| 301 | - Remove #include "sensors.h", copy SYSCTL defs to module |
|---|
| 302 | - Remove excess #includes |
|---|
| 303 | - Remove argument in i2c_register_entry() |
|---|
| 304 | - Remove dummy xxx_command() definition |
|---|
| 305 | - Remove EXPORT_NO_SYMBOLS |
|---|
| 306 | - Remove init_MUTEX #define |
|---|
| 307 | - Remove xxx_inc_use() and xxx_dec_use() functions; modules |
|---|
| 308 | no longer adjust their own refcounts |
|---|
| 309 | - Use module_init() and module_exit() |
|---|
| 310 | - Update to new i2c_driver struct definition |
|---|
| 311 | Modules (bus PCI): Convert to PCI-module-style initialization |
|---|
| 312 | Modules (several): Add support for AMD Opteron VRM (VID) encoding |
|---|
| 313 | Module adm1021: Set alarm on failed reads and report old value; |
|---|
| 314 | merge changes from kernel 2.5.54 |
|---|
| 315 | Module adm1026: New |
|---|
| 316 | Module bmcsensors: Fix compile when DEBUG=1 |
|---|
| 317 | Modules ddcmon, eeprom: Use i2c block reads if possible; |
|---|
| 318 | better error handling |
|---|
| 319 | Module ds1307: Add to Makefile |
|---|
| 320 | Module gl520sm: Fix temperature over/hyst writes |
|---|
| 321 | Module lm75: merge changes from kernel 2.5.54 |
|---|
| 322 | Module lm83: New |
|---|
| 323 | Module lm85: New |
|---|
| 324 | Module i2c-ali1535: Check for invalid transaction |
|---|
| 325 | Module i2c-ali15x3: Check for invalid transaction |
|---|
| 326 | Module i2c-amd756: merge changes from kernel 2.5.54; |
|---|
| 327 | check for invalid transaction |
|---|
| 328 | Module i2c-amd8111: merge changes from kernel 2.5.54 |
|---|
| 329 | Module i2c-i801: Add support for 82801EB (ICH5) |
|---|
| 330 | Module i2c-i810: Fix for some chips |
|---|
| 331 | Module i2c-nforce2: New |
|---|
| 332 | Module i2c-piix4: Check for invalid transaction |
|---|
| 333 | Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs |
|---|
| 334 | Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746 |
|---|
| 335 | north bridges; SiS962 and SiS963 south bridges |
|---|
| 336 | Module i2c-viapro: Check for invalid transaction |
|---|
| 337 | Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve |
|---|
| 338 | pwm and pwm enable support; update docs |
|---|
| 339 | Module smbus-arp: Check adapter for HW or SW PEC support; |
|---|
| 340 | add reset option |
|---|
| 341 | Module w83781d: Add support for w83791d |
|---|
| 342 | Module w83627hf: New |
|---|
| 343 | Program decode-dimms.pl: Recognize DDR and Rambus |
|---|
| 344 | Program eeprom: Fix writes for small eeproms |
|---|
| 345 | Program eeprom, eepromer: Use local i2c-dev.h for build |
|---|
| 346 | Program fancontrol: New |
|---|
| 347 | Program lm_sensors.init: Call sensors -s in start() |
|---|
| 348 | Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha; |
|---|
| 349 | Add adm1026,lm85 support; |
|---|
| 350 | Remove sensors.c file; add sensors_compat.h; |
|---|
| 351 | Remove patches to i2c-core.c and drivers/char/mem.c; |
|---|
| 352 | Now works only for kernels 2.4.13 or later |
|---|
| 353 | Program p4b_smbus: Fix 'make install'; |
|---|
| 354 | Install in same place as other modules; |
|---|
| 355 | Clear correct bits in config word |
|---|
| 356 | Program pwmconfig: New |
|---|
| 357 | Program sensors: add adm1026, lm85, w83791d support |
|---|
| 358 | Program sensors-detect: Add super i/o detection (smsc47m1, vt1211, |
|---|
| 359 | w83627hf, w83627thf, w83697hf); |
|---|
| 360 | Add support for SiS651, SiS961, SiS745, SiS746; |
|---|
| 361 | Support dmidecode 2.0 and later; |
|---|
| 362 | Fix "C" format error; |
|---|
| 363 | Add support for adm1026, 82801EB (ICH5), W83791D; |
|---|
| 364 | Add support for w83l785ts, nForce2; |
|---|
| 365 | Fix UTF-8 incompatibility; |
|---|
| 366 | Better support for lm75; |
|---|
| 367 | Add support for lm83 |
|---|
| 368 | |
|---|
| 369 | 2.7.0 (20021208) |
|---|
| 370 | NOTE: Requires i2c-2.7.0 or newer. |
|---|
| 371 | File doc/busses/i2c-ali1535: Add license, miscellaneous changes |
|---|
| 372 | File doc/busses/i2c-ali15x3: Add license, miscellaneous changes |
|---|
| 373 | File doc/busses/i2c-sis645: Add license |
|---|
| 374 | File doc/chips/lm92: Add license, features |
|---|
| 375 | File doc/chips/maxilife: Add license, parameters, features |
|---|
| 376 | File doc/chips/smartbatt: Complete rewrite |
|---|
| 377 | File doc/chips/vt8231: Add license, parameters |
|---|
| 378 | File sensors.conf.eg: Add section for lm75; complete the lm78 section |
|---|
| 379 | Library: Add support for MC1066; add multiple VRM version support for lm87; |
|---|
| 380 | enhance adm1023 support; initial support for Sony Vaio eeprom; |
|---|
| 381 | add support for bmcsensors; add hacks for additional dummy drivers |
|---|
| 382 | Makefile: Take kernel source location from /lib/modules/x.x.x/build; |
|---|
| 383 | add flags for x86_64 compiles |
|---|
| 384 | Module adm1021: Add support for MC1066 |
|---|
| 385 | Module bmcsensors: New |
|---|
| 386 | Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from |
|---|
| 387 | kernel 2.5.43; fix 2.2 kernel compiles |
|---|
| 388 | Module gl518sm: Iterate allowed only for rev 0x00 |
|---|
| 389 | Module i2c-amd756: Configure base address for nForce support; |
|---|
| 390 | check for uninitialized base address; |
|---|
| 391 | add support for amd8111 (SMBus 1.0) |
|---|
| 392 | Module i2c-amd8111: New (SMBus 2.0) |
|---|
| 393 | Module i2c-ipmb: New |
|---|
| 394 | Module i2c-ipmi: New |
|---|
| 395 | Module i2c-keywest: Sync with kernel 2.4.20 |
|---|
| 396 | Module i2c-sis630: Add support for SiS730 |
|---|
| 397 | Module i2c-sis645: Improve support for SiS645/961; |
|---|
| 398 | add support for SiS645DX/961 and SiS735; |
|---|
| 399 | fix 2.2 kernel compiles |
|---|
| 400 | Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235 |
|---|
| 401 | Module lm87: Add multiple VRM version support |
|---|
| 402 | Module vt1211: Fix inx limits and alarms; fix in0 |
|---|
| 403 | Module vt8231: Fix inx limits and alarms; fix in0 |
|---|
| 404 | Module w83781d: Fix in0/in1 initialization |
|---|
| 405 | Module smartbatt: New |
|---|
| 406 | Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes |
|---|
| 407 | Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output; |
|---|
| 408 | stop decoding on checksum error |
|---|
| 409 | Program dmidecode: Fix read bug; upgrade to version 1.8 |
|---|
| 410 | Program doc-insmod: Complete rewrite; fix author output |
|---|
| 411 | Program doc-features: Complete rewrite; handle missing sysctl entries; |
|---|
| 412 | handle unknown prefix with suggestion |
|---|
| 413 | Program lm_sensors.init: Remove spaces bug; add green/red output |
|---|
| 414 | Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111 |
|---|
| 415 | Program rrd: Add sanity limits to newly-created RRD. |
|---|
| 416 | Program sensord: (v0.6.2) Add sanity limits to newly-created RRD. |
|---|
| 417 | Program sensors: Add support for MC1066, Rambus Rimms; |
|---|
| 418 | fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition; |
|---|
| 419 | initial support for Sony Vaio eeprom |
|---|
| 420 | Program sensors-detect: Add support for MC1066, smart battery, 8235, |
|---|
| 421 | IPMI, AMD8111; add help if no sensors found; |
|---|
| 422 | add ACPI method for IBM system detection; |
|---|
| 423 | work with old Perl versions again; |
|---|
| 424 | initial support for Sony Vaio eeprom |
|---|
| 425 | |
|---|
| 426 | 2.6.5 (20020915) |
|---|
| 427 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 428 | File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231 |
|---|
| 429 | Library: Fix fan3_div writes for w8378* and it87; add vt8231 |
|---|
| 430 | Module dmi_scan: new |
|---|
| 431 | Module ds1621: Fix enable/disable |
|---|
| 432 | Module eeprom: Do not corrupt 24RF08's when checksum=1 |
|---|
| 433 | Module i2c-i801: Check for uninitialized base address; |
|---|
| 434 | enable if not enabled |
|---|
| 435 | Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption |
|---|
| 436 | Module i2c-sis630: new |
|---|
| 437 | Module i2c-sis645: new |
|---|
| 438 | Module lm92: Fix in-kernel initialization |
|---|
| 439 | Module via686a: Remove VT8231 support |
|---|
| 440 | Module vt8231: new |
|---|
| 441 | Module w83781: recognize Asus "ASB100 Bach" as AS99127F |
|---|
| 442 | Program dmidecode: new |
|---|
| 443 | Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install' |
|---|
| 444 | Program mkpatch: Add Config.in entries for, lm92, |
|---|
| 445 | pcf8574, pcf8591, smsc47m1, vt1211; |
|---|
| 446 | add dmi_scan |
|---|
| 447 | Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem |
|---|
| 448 | Program lm_sensors.init: fix stop() |
|---|
| 449 | Program sensord: (v0.6.1) Add /usr/local/etc to config file path; |
|---|
| 450 | add support for logging loadavg in RRD; |
|---|
| 451 | fix down-converting raw labels for RRD; |
|---|
| 452 | update chip support, still behind sensors |
|---|
| 453 | Program sensors: Add /usr/local/etc to config file path; |
|---|
| 454 | fix -c and -u flags; add vt8231 |
|---|
| 455 | Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F; |
|---|
| 456 | refuse to run on IBM systems; |
|---|
| 457 | fix sysconfig module numbering; |
|---|
| 458 | change quick write to not corrupt 24RF08's |
|---|
| 459 | |
|---|
| 460 | 2.6.4 (20020719) |
|---|
| 461 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 462 | File doc/vid: New |
|---|
| 463 | File include/sensors_vid.h: New |
|---|
| 464 | File sensors.conf.eg: Add vt1211, smsc47m1 |
|---|
| 465 | Library: Add multiple VRM version support for adm1025, w83781d; |
|---|
| 466 | fix 'flex scanner jammed' on some systems; |
|---|
| 467 | add vt1211, smsc47m1, lm92; |
|---|
| 468 | fix access mode checking |
|---|
| 469 | Makefiles: For 2.4+ kernels, modules now install in |
|---|
| 470 | kernel/drivers/[i2c,sensors] , not misc/ , and |
|---|
| 471 | 'make install' removes old versions in misc/ . |
|---|
| 472 | Use $CFLAGS and $CPPFLAGS if defined. |
|---|
| 473 | Module adm1025: Add multiple VID version support |
|---|
| 474 | Module ds1307: new |
|---|
| 475 | Module i2c-amd756: Add nVidia nForce support; fix block read length; |
|---|
| 476 | reliability improvements |
|---|
| 477 | Module i2c-hydra: Flush posted writes |
|---|
| 478 | Module i2c-i801: Add support for 82801DB (ICH4) |
|---|
| 479 | Module i2c-i810: Flush posted writes |
|---|
| 480 | Module i2c-savage4: new |
|---|
| 481 | Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147) |
|---|
| 482 | Module i2c-voodoo3: Flush posted writes |
|---|
| 483 | Module ds1307: New |
|---|
| 484 | Module lm92: New |
|---|
| 485 | Module smbus-arp: new |
|---|
| 486 | Module smsc47m1: new |
|---|
| 487 | Module via686a: Add support for VT8231 sensors |
|---|
| 488 | Module vt1211: new |
|---|
| 489 | Module w83781d: Add multiple VID version support; fix temp alarms |
|---|
| 490 | Program eeprom: new |
|---|
| 491 | Program i2cdump: Add smbus block command specification, add PEC support |
|---|
| 492 | Program lm_sensors.init: new |
|---|
| 493 | Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92, |
|---|
| 494 | pcf8574, pcf8591, smsc47m1, vt1211 |
|---|
| 495 | Program p4b_smbus: Add support for ICH4 |
|---|
| 496 | Program rrd: Fix swapped CPU and MB temps in summ_week.cgi |
|---|
| 497 | Program sensord.init: Renamed, was prog/init/sensors |
|---|
| 498 | Program sensord: Major update, now requires rrd source; |
|---|
| 499 | not compiled by default |
|---|
| 500 | Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A |
|---|
| 501 | (don't display algo. and adap.) option; |
|---|
| 502 | add vt1211, smsc47m1, lm92 |
|---|
| 503 | Program sensors-detect: Add VT8231, VT8233A, several S3 devices; |
|---|
| 504 | add 82801DB, LM85; fix perl warnings; |
|---|
| 505 | generate /etc/sysconfig/lm_sensors for |
|---|
| 506 | lm_sensors.init script |
|---|
| 507 | |
|---|
| 508 | 2.6.3 (20020322) |
|---|
| 509 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 510 | Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+ |
|---|
| 511 | File doc/chips/it87: add more temp_type help |
|---|
| 512 | File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3; |
|---|
| 513 | add adm1021 section; add lm87 AIN[1,2] template; |
|---|
| 514 | swap negative voltage limits for 782d,783s,627hf, |
|---|
| 515 | 697hf,it87; add more it87 help; swap neg. voltage |
|---|
| 516 | limits for lm78(-j), lm79, w83781d, as99127f |
|---|
| 517 | Library: Add PCF8591, W83697HF, ADM1023 support; |
|---|
| 518 | fix w83* fan_min computes; |
|---|
| 519 | swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f |
|---|
| 520 | Module adm1024: Add MODULE_LICENSE("GPL") |
|---|
| 521 | Module bt869: Add s-video out and DVD resolution support |
|---|
| 522 | Module eeprom: Add support for locations 128-255; rename /proc entries in hex |
|---|
| 523 | Module fscscy: implement min/max for voltages and fans |
|---|
| 524 | Module i2c-amd756: Add support for AMD768 |
|---|
| 525 | Module i2c-i810: Add support for 810E |
|---|
| 526 | Module i2c-keywest: Big update, sync with kernel 2.4.18 |
|---|
| 527 | Module i2c-piix4: Check for uninitialized base address |
|---|
| 528 | Module i2c-sis5595: Blacklist 645, 735 |
|---|
| 529 | Module i2c-viapro: Check for uninitialized base address |
|---|
| 530 | Module gl518sm: Standardize /proc entries in0-3 |
|---|
| 531 | Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7]; |
|---|
| 532 | fan -> fan1; fix temp2 limit writes |
|---|
| 533 | Module pcf8574: Add support for PCF8574A; /proc interface changed |
|---|
| 534 | Module pcf8591: new |
|---|
| 535 | Module sis5595: Blacklist 645, 735 |
|---|
| 536 | Module w83781d: Add W83697HF support; allow force_subclients parameter |
|---|
| 537 | for Tyan 2460 |
|---|
| 538 | Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names |
|---|
| 539 | Program decode-vaio.pl: new |
|---|
| 540 | Program i2cdump: Add i2c block read capability (requires i2c-2.6.3); |
|---|
| 541 | add text output |
|---|
| 542 | Program init/sensors: New SysV init script |
|---|
| 543 | Program mkpatch.pl: Add support for fscscy, add more help entries |
|---|
| 544 | Program p4b_smbus: new |
|---|
| 545 | Program rrd: Install summ_week.cgi |
|---|
| 546 | Program sensors: Add PCF8591, W83697HF, ADM1023 support, |
|---|
| 547 | clean up chassis intrusion prints |
|---|
| 548 | Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E; |
|---|
| 549 | fix Via686a and it87 detection; |
|---|
| 550 | add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231; |
|---|
| 551 | fix uninitialized values; it87 beats lm78 |
|---|
| 552 | |
|---|
| 553 | 2.6.2 (20011118) |
|---|
| 554 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 555 | Chip Modules (all): malloc.h -> slab.h |
|---|
| 556 | Modules (all): Add MODULE_LICENSE("GPL") |
|---|
| 557 | File doc/FAQ: More updates and additions |
|---|
| 558 | File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations |
|---|
| 559 | Library: Add fscpos and fscscy support, fix gl520 in4 ID, |
|---|
| 560 | update it87 alarm ID's. |
|---|
| 561 | Module fscpos: new (Fujitsu-Siemens Poseidon driver) |
|---|
| 562 | Module fscscy: new (Fujitsu-Siemens Scylla driver) |
|---|
| 563 | Module i2c-amd756: Improve busy handling/printk's |
|---|
| 564 | Module i2c-i801: Add 82801CA/CAM support |
|---|
| 565 | Module i2c-keywest: Sync with PPC people, it works now |
|---|
| 566 | Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support |
|---|
| 567 | Module i2c-viapro: Add Via VT8233 support |
|---|
| 568 | Module it87: Merge alarm_* /proc entries to alarms |
|---|
| 569 | Module sis5595: Fix support for rev B0 |
|---|
| 570 | Module via686a: Make limit initializations reliable |
|---|
| 571 | Module w83781d: Allow init=0 parameter to bypass initialization |
|---|
| 572 | Program isadump: Add flat address space (PCI) support |
|---|
| 573 | Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621, |
|---|
| 574 | fscpos, it87, maxilife, mtp008 |
|---|
| 575 | Program sensors: Fix w83781d temp precision |
|---|
| 576 | Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c), |
|---|
| 577 | Fujitsu Poseidon and Scylla, |
|---|
| 578 | Intel 82443MX and 82801CA/CAM detection, |
|---|
| 579 | add ITE 8172G detection (driver in kernel 2.4.10) |
|---|
| 580 | |
|---|
| 581 | 2.6.1 (20010830) |
|---|
| 582 | File BUGS: Updated |
|---|
| 583 | File doc/FAQ: More updates and additions |
|---|
| 584 | File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A |
|---|
| 585 | File sensors.conf.eg: Fix/enhance it87 section |
|---|
| 586 | Library: ds1621 and it87 updates |
|---|
| 587 | Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled. |
|---|
| 588 | Module i2c-amd756: Add AMD 766 support |
|---|
| 589 | Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6 |
|---|
| 590 | Module i2c-piix4: Add Serverworks CSB5 support |
|---|
| 591 | Module i2c-sis5595: Recognize unsupported chips and refuse to load |
|---|
| 592 | Module adm1025: Fixed temp2 min/max writes |
|---|
| 593 | Module ds1621: Add 12-bit precision mode |
|---|
| 594 | Module it87: Enable all alarms, add in8 support, add sensor type selection |
|---|
| 595 | Module sensors: Don't initialize i2c-proc (moved to i2c-core); |
|---|
| 596 | remove support for module |
|---|
| 597 | Module sis5595: Recognize unsupported chips and refuse to load |
|---|
| 598 | Module w83781d: Fix fan speed for as99127f (broken by 2.6.0) |
|---|
| 599 | Program eepromer: new |
|---|
| 600 | Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation |
|---|
| 601 | of sensors.c as a module in kernel |
|---|
| 602 | Program sensors: it87 updates; adjust temp. precision for some chips |
|---|
| 603 | Program sensors-detect: Fix ADM1024 and ADM1025 detection; |
|---|
| 604 | recognize unsupported SiS chips; |
|---|
| 605 | recognize AMD 766 and Serverworks CSB5. |
|---|
| 606 | |
|---|
| 607 | 2.6.0 (20010612) |
|---|
| 608 | NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!! |
|---|
| 609 | If your make fails because it can't find <linux/i2c-proc.h>, you |
|---|
| 610 | forgot this step!!! |
|---|
| 611 | File doc/FAQ: Many, many updates and additions |
|---|
| 612 | File doc/busses/i2c-sis5595: new |
|---|
| 613 | File doc/busses/i2c-tsunami: new |
|---|
| 614 | File doc/chips/it87: new |
|---|
| 615 | File doc/chips/via686a: Claim support for 686b. |
|---|
| 616 | File README.thinkpad: new |
|---|
| 617 | File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations; |
|---|
| 618 | Add lm87, adm9240, ds1780, lm81 templates; |
|---|
| 619 | Enhance help comments in file; |
|---|
| 620 | Add Tyan S2510 dual-MTP008 example; |
|---|
| 621 | Make separate sis5595 section. |
|---|
| 622 | Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package |
|---|
| 623 | Include file sensors.h: Most contents moved to i2c-proc.h in i2c package |
|---|
| 624 | Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4; |
|---|
| 625 | Add support for maxilife-nba and amd1024; |
|---|
| 626 | Change from sensors_* to i2c_* globals for new i2c-proc.[ch] |
|---|
| 627 | Chip Modules (all ISA): Remove #include "i2c-isa.h" |
|---|
| 628 | Chip Modules (all): Change from sensors_* to i2c_* globals |
|---|
| 629 | for new i2c-proc.[ch] |
|---|
| 630 | Makefiles: enhance to support Alpha architecture |
|---|
| 631 | Module adm1021: Fix lm84 and gl523sm support |
|---|
| 632 | Module adm1024: new |
|---|
| 633 | Module i2c-i801: Chip detection cleanup |
|---|
| 634 | Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel |
|---|
| 635 | Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled. |
|---|
| 636 | Module i2c-tsunami: New |
|---|
| 637 | Module i2c-via: Ensure i2c bus is tristated correctly. |
|---|
| 638 | Module it87: new driver for IT8705, IT8712, Sis950 chips |
|---|
| 639 | Module lm78: Recognize chipid=0x20 |
|---|
| 640 | Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations |
|---|
| 641 | Module mtp008: Fix temp initializations; |
|---|
| 642 | Save BIOS pin configuration of temps and fans; |
|---|
| 643 | Fix sensor type reads/writes and fan min writes; |
|---|
| 644 | Fix spurious invalid sensor type messages |
|---|
| 645 | Module sensors: Disabled, moved to i2c package as i2c-proc.c; only |
|---|
| 646 | used for patched kernel now. |
|---|
| 647 | Add xxx_init() calls for drivers added to mkpatch in 2.5.5. |
|---|
| 648 | Module sis5595: Fix temp, add in4 for chip revision 0xc0; |
|---|
| 649 | Allow force_addr=0xaddr |
|---|
| 650 | Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards) |
|---|
| 651 | Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp |
|---|
| 652 | reading changes; Add messages for subclient |
|---|
| 653 | registration failure |
|---|
| 654 | Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support |
|---|
| 655 | Program i2cset: new |
|---|
| 656 | Program isadump: fix for Alpha arch. compiles |
|---|
| 657 | Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help; |
|---|
| 658 | Remove ltc1710; Fix i2c_sis5595 typo; |
|---|
| 659 | Support kernel 2.4.5 makefile change; |
|---|
| 660 | Add i2c-tsunami; fixed i2c-voodoo3 configuration |
|---|
| 661 | Program sens_update_rrd: new |
|---|
| 662 | Program sensord: Add -d (debug) and -p (pid-file) options |
|---|
| 663 | Program sensors: Change reported version from 1.3 to the lm_sensors version; |
|---|
| 664 | Fix swapped limit and hysteresis on 9240, 5595, 686a; |
|---|
| 665 | Change mtp008 temps from max/min to limit/hyst; |
|---|
| 666 | Add maxilife-nba, adm1024, it87 support. |
|---|
| 667 | Program sensors-detect: Recognize lm78 with chipid=0x20; |
|---|
| 668 | Recognize SMSC Victory66 South Bridge; |
|---|
| 669 | Add devfs /dev/i2c/x support; |
|---|
| 670 | Add adm1024, it87xx support; Add thinkpad warning. |
|---|
| 671 | Program tellerstats: new |
|---|
| 672 | |
|---|
| 673 | 2.5.5 (20010115) |
|---|
| 674 | NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS |
|---|
| 675 | you have kernel 2.4.0-prerelease or greater. |
|---|
| 676 | Chip modules (all): Update mutex definition (works now for new 2.2 kernels) |
|---|
| 677 | File doc/developers/proc: new |
|---|
| 678 | File sensors.conf.eg: Add mtp008 entries, adm1025 entries |
|---|
| 679 | Library: Add ds1621, mtp008 support |
|---|
| 680 | Module adm1021: Add support for adm1021a / adm1023 |
|---|
| 681 | Modules adm1021, thmc50: Rename /proc entries to temp[1-2] |
|---|
| 682 | Module adm1025: Add support for remote temp; rename /proc entries to |
|---|
| 683 | in[0-5] and temp[1-2]; fix negative temp readings |
|---|
| 684 | Module adm9240: Rename /proc entries to in[0-5] |
|---|
| 685 | Module ddcmon: allow force and force_ddcmon parameters |
|---|
| 686 | Module ds1621: new |
|---|
| 687 | Module i2c-ali1535: Enhance error checking and recovery; add mutex |
|---|
| 688 | Module i2c-i810: Add "dummy write" before reads per Intel prog. ref. |
|---|
| 689 | Module i2c-piix4: add support for ServerWorks southbridge OSB4 |
|---|
| 690 | Module lm87: cleanup, update voltage calculations |
|---|
| 691 | Module mtp008: new |
|---|
| 692 | Module pcf8574: change update time to 5 seconds |
|---|
| 693 | Modules sis5595, i2c-sis5595: Check for uninitialized base addresses |
|---|
| 694 | Module w83781d: fix beep setting via /proc |
|---|
| 695 | Programs editticket, readticket: new |
|---|
| 696 | Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed |
|---|
| 697 | Program mkpatch.pl: more fixes; now adds many more modules |
|---|
| 698 | Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option; |
|---|
| 699 | add adm1025 temp2; report temp limits correctly as |
|---|
| 700 | min/max or limit/hysteresis; print message if no |
|---|
| 701 | sensors are found. Removed false errors from lm87 reads. |
|---|
| 702 | Program sensors-detect: Add ds1621, mtp008 detection; |
|---|
| 703 | add ServerWorks detection |
|---|
| 704 | |
|---|
| 705 | 2.5.4 (20001012) |
|---|
| 706 | Module i2c-viapro: Add support for Via 596B (0x3051) |
|---|
| 707 | Program m7101: moved to CVS tree, updated for 2.4.0 kernels |
|---|
| 708 | Program mkpatch.pl: fixed infinite loop |
|---|
| 709 | Program sensors-detect: Detect Via 596B (0x3051) |
|---|
| 710 | |
|---|
| 711 | 2.5.3 (20001008) |
|---|
| 712 | NOTE: i2c 2.5.3 MUST BE be compiled and installed first. |
|---|
| 713 | File useful_addresses.html: update |
|---|
| 714 | Library: Add lm87 support |
|---|
| 715 | Module pcf8574: new |
|---|
| 716 | Module i2c-ali1535: new |
|---|
| 717 | Module i2c-ali15x3: removed force #ifdef. |
|---|
| 718 | Module i2c-i801: support Intel 82801BA (815E chipset) |
|---|
| 719 | Module i2c-i801: add i2c block write support, fix smbus block bugs |
|---|
| 720 | (requires i2c 2.5.3 package) |
|---|
| 721 | Module i2c-i810: support Intel 82815 |
|---|
| 722 | Module lm87: new |
|---|
| 723 | Module sensors: Fix for kernel 2.4.0-test8 |
|---|
| 724 | (remove copy_to_user_ret and put_user_ret) |
|---|
| 725 | Module w83781d: limit fan divisors to 8 max. for as99127f |
|---|
| 726 | Program decode-dimms: Add html output option, update for SPD spec 1.2B. |
|---|
| 727 | Program i2cdump: Add smbus block read support |
|---|
| 728 | Programs i2cdetect, i2cdump: Improve error reporting |
|---|
| 729 | Program sensors: new switch -u (--unknown) |
|---|
| 730 | Program sensors-detect: detect Intel 82801BA (815E chipset) |
|---|
| 731 | Program sensors-detect: detect Intel 82815 |
|---|
| 732 | Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet) |
|---|
| 733 | Program sensors-detect: detect National LM87 |
|---|
| 734 | Program sensors-detect: detect nVidia devices supported by i2c-riva.o |
|---|
| 735 | Program sensors-detect: Improve error reporting |
|---|
| 736 | |
|---|
| 737 | 2.5.2 (20000709) |
|---|
| 738 | File sensors.conf.eg: Fix lm80 in8 calculation |
|---|
| 739 | Module w83781d: W83783S no longer crashes on unloading |
|---|
| 740 | Program sensors-detect: more robustness in case of unknown i2c adapters |
|---|
| 741 | Program sensors-detect, libsensors: fix eeprom size reporting |
|---|
| 742 | Program sensord: more flexibility, support for alarm scanning etc. |
|---|
| 743 | Program sensors: support for ignore setting on sensor alarms. |
|---|
| 744 | Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too. |
|---|
| 745 | |
|---|
| 746 | 2.5.1 (20000618) |
|---|
| 747 | Library: Add adm1025 support |
|---|
| 748 | Module adm1025: new |
|---|
| 749 | Module ddcmon: Fixed bus scan which could hang SMBus |
|---|
| 750 | Module i2c-keywest: new |
|---|
| 751 | Module maxilife: Add support for Maxilife '99 (NBA) |
|---|
| 752 | Module via686a: Enable sensors if not enabled by BIOS |
|---|
| 753 | Module w83781d: Improve w83783s support, w83627hf always has 2 pwm |
|---|
| 754 | Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring |
|---|
| 755 | Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3 |
|---|
| 756 | Module w83781d: Fis as99127f fan speed (was 66% too high) |
|---|
| 757 | Module w83781d: Improve beep input checking |
|---|
| 758 | Program i2cdump: Add Winbond-style bank selection |
|---|
| 759 | Program isadump: Add Winbond-style bank selection |
|---|
| 760 | Program sensors: Add adm1025 support. |
|---|
| 761 | Program sensors: Remove some as99127f entries, fix as99127 "(beep)" |
|---|
| 762 | Program sensors-detect: Fix i801 detection, add adm1025 driver entry |
|---|
| 763 | File sensors.conf.eg: Add Maxilife '99 entries |
|---|
| 764 | File sensors.conf.eg: Remove some as99127f entries. |
|---|
| 765 | Note: For as99127f, reinstall sensors.conf.eg manually (make install |
|---|
| 766 | won't reinstall it) or else 'sensors -s' will fail. |
|---|
| 767 | |
|---|
| 768 | 2.5.0 (20000312) |
|---|
| 769 | Dropped all kernel 2.0 and 2.1 compatibility |
|---|
| 770 | Module i2c-i810: new |
|---|
| 771 | Module ddcmon: new |
|---|
| 772 | Module via686a: new |
|---|
| 773 | Module i2c-amd756: fixed region request |
|---|
| 774 | Module i2c-voodoo3: Converted to use i2c-algo-bit layer |
|---|
| 775 | Module w83781d: Don't change pin settings at initialization; |
|---|
| 776 | also fix chip detection. |
|---|
| 777 | Library: Support for ddcmon and via686a |
|---|
| 778 | Program sensors-detect: Support for ddcmon and via686a |
|---|
| 779 | Program sensors: Support for eeprom, ddcmon and via686a |
|---|
| 780 | |
|---|
| 781 | 2.4.5 (20000116) |
|---|
| 782 | Introduced DESTDIR installation prefix |
|---|
| 783 | Module lm80: fixes, temperature now read and set correctly |
|---|
| 784 | Module i2c-voodoo3: driver enhancements |
|---|
| 785 | Module w83781d: fixes, AS99127 works much better now |
|---|
| 786 | Library: New ignore keyword in config file |
|---|
| 787 | Programs: Support for new ignore keyword |
|---|
| 788 | Program sensors-detect: Support for MGA detections |
|---|
| 789 | |
|---|
| 790 | 2.4.4 (19991201) |
|---|
| 791 | Addition of the alpha release of AMD 756 SMBus host support. |
|---|
| 792 | Many fixes and updates to the gl518sm driver |
|---|
| 793 | Updates and fixes for device detection |
|---|
| 794 | |
|---|
| 795 | 2.4.0 (19990920) |
|---|
| 796 | Too much to list. |
|---|
| 797 | i2c and smbus parts are split off to a separate i2c package. |
|---|
| 798 | New drivers and other stuff. |
|---|
| 799 | |
|---|
| 800 | 2.3.4 (19990616) |
|---|
| 801 | Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs) |
|---|
| 802 | All: Now compiles against kernel 2.0.x (again ;) |
|---|
| 803 | Module gl518sm: some updates and refinements |
|---|
| 804 | |
|---|
| 805 | 2.3.3 (19990603) |
|---|
| 806 | All: Now compiles against kernel 2.3.x (x >= 1) |
|---|
| 807 | Module i2c-voodoo3: Timing issue fixes |
|---|
| 808 | Module bt869: Seems to be functional and relatively well tested |
|---|
| 809 | Many modules were modified to be more compatible with the new |
|---|
| 810 | Mutex structure in the new experimental kernels. |
|---|
| 811 | |
|---|
| 812 | 2.3.2 (19990507) |
|---|
| 813 | Module i2c-hydra: Now compiles on 2.0.x kernels |
|---|
| 814 | Module i2c-lm75: Slightly better detection |
|---|
| 815 | * New, but not compiled by default: |
|---|
| 816 | Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver |
|---|
| 817 | Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver |
|---|
| 818 | |
|---|
| 819 | 2.3.1 (19990501) |
|---|
| 820 | All: Now compiles on PPC |
|---|
| 821 | Module i2c-hydra: NEW |
|---|
| 822 | Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works |
|---|
| 823 | Module w83781d: Removed deadlock (mutex was not initialized) |
|---|
| 824 | Documentation: A few glitches removed |
|---|
| 825 | Makefile: default module installation directory is now |
|---|
| 826 | /lib/modules/current/extra/misc |
|---|
| 827 | Program sensors-detect: PPC Hydra now detected |
|---|
| 828 | Program sensors: Now prints complete GL518SM information |
|---|
| 829 | Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added |
|---|
| 830 | |
|---|
| 831 | 2.3.0 (19990422) |
|---|
| 832 | All: Many, many changes and improvements |
|---|
| 833 | All: Many small bugs and problems removed |
|---|
| 834 | Modules: New insmod parameters |
|---|
| 835 | Modules: Much improved chip detection |
|---|
| 836 | Module maxilife: NEW |
|---|
| 837 | Module adm1021: MAX1617A now also supported |
|---|
| 838 | Module adm9240: DS1780 now also supported |
|---|
| 839 | Module w83781d: W83782D and W83783S now also supported |
|---|
| 840 | Program sensors-detect: NEW |
|---|
| 841 | Library: All chips now supported |
|---|
| 842 | Documentation: Very much improved |
|---|
| 843 | |
|---|
| 844 | 2.2.2 (199903??) |
|---|
| 845 | Just some minor updates and bug fixes. |
|---|
| 846 | |
|---|
| 847 | 2.2.1 (19990218) |
|---|
| 848 | All: Removed compile warnings |
|---|
| 849 | Module i2c-dev: Small bug removed if DEBUG=1 was used |
|---|
| 850 | Module sis5595: Now compiles for 2.0 kernels |
|---|
| 851 | Module adm1021: Detection corrected |
|---|
| 852 | |
|---|
| 853 | 2.2.0 (19990216) |
|---|
| 854 | All: Set copyrights to include 1999 |
|---|
| 855 | All: Small bugfixes |
|---|
| 856 | I2C: Upgraded to newest archive of Simon Vogl |
|---|
| 857 | Module i2c-dev: NEW |
|---|
| 858 | Module i2c-ali15x3: NEW |
|---|
| 859 | Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors |
|---|
| 860 | directories, and somewhat improved |
|---|
| 861 | Module sis5595: NEW |
|---|
| 862 | Modules: Renamed all bus modules to i2c-*, new directory lay-out |
|---|
| 863 | Library: Support for new chip drivers, several small bugs fixed |
|---|
| 864 | Library manual pages: NEW |
|---|
| 865 | Program i2cdetect: Moved to detect directory |
|---|
| 866 | Program detect.pl: NEW |
|---|
| 867 | Program doc-features: NEW |
|---|
| 868 | Program sensors: Added man-page |
|---|
| 869 | Document BUGS: Added cdrom bug and kernel i2c conflict |
|---|
| 870 | |
|---|
| 871 | 2.1.2 (19990116) |
|---|
| 872 | Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected |
|---|
| 873 | Module gl518sm.o: yet more bug fixes. It should at long last be usable now |
|---|
| 874 | Documentation in doc/kernel: NEW |
|---|
| 875 | |
|---|
| 876 | 2.1.1 (19990107) |
|---|
| 877 | Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35 |
|---|
| 878 | and older |
|---|
| 879 | Module gl518sm.o: Miscelaneous bugs and problems solved |
|---|
| 880 | Program isadump: NEW |
|---|
| 881 | |
|---|
| 882 | 2.1.0 (19981230) |
|---|
| 883 | Library: Completely NEW |
|---|
| 884 | Program sensors: NEW |
|---|
| 885 | Program grab_busses: NEW |
|---|
| 886 | Program decode-dimms: More information |
|---|
| 887 | Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets |
|---|
| 888 | Module w83781d.o: NEW |
|---|
| 889 | Module lm80.o: NEW |
|---|
| 890 | Module gl518sm.o: new procfile beep, several small updates |
|---|
| 891 | Modules: Now use pin readings, no more scaling within the kernel (use the |
|---|
| 892 | library instead) |
|---|
| 893 | |
|---|
| 894 | 2.0.2 (19981214) |
|---|
| 895 | Module eeprom.o: NEW |
|---|
| 896 | Program decode-dimms: NEW |
|---|
| 897 | Modules: fill_inode fix, will stop segfaults on unloading in kernels after |
|---|
| 898 | 2.1.58 |
|---|
| 899 | Modules: Somewhat less verbose on transfers |
|---|
| 900 | Module lm78.o now recognizes and handles lm78-j and lm79 |
|---|
| 901 | |
|---|
| 902 | 2.0.1 (1998121?) |
|---|
| 903 | Module gl518sm.o updates, to make it actually work |
|---|
| 904 | Module lm75.o high/low-byte swapping write bug fixed |
|---|
| 905 | |
|---|
| 906 | 2.0.0 (19981209) |
|---|
| 907 | Initial release |
|---|
