| 1 | lm_sensors CHANGES file |
|---|
| 2 | ----------------------- |
|---|
| 3 | This is a list of the most important changes in 2.x versions. It is by |
|---|
| 4 | no means complete, listing only the most significant changes. |
|---|
| 5 | The ultimate way to know what has changed is to run diff, or even neater, |
|---|
| 6 | ask CVS about it: |
|---|
| 7 | |
|---|
| 8 | * Checkout the archive (see doc/cvs for how you can do this) |
|---|
| 9 | * Determine which tags are valid, by running this command from the |
|---|
| 10 | project root directory: |
|---|
| 11 | cvs status -v -l Makefile |
|---|
| 12 | Valid tags are usually of the form V2-1-0 for version 2.1.0 |
|---|
| 13 | * Ask cvs for the difference between two versions: |
|---|
| 14 | cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS |
|---|
| 15 | for example: |
|---|
| 16 | cvs diff -r V2-0-0 -r V2-0-1 -u |
|---|
| 17 | |
|---|
| 18 | ----------------------------------------------------------------------------- |
|---|
| 19 | |
|---|
| 20 | 2.6.5 (2002????) |
|---|
| 21 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 22 | File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231 |
|---|
| 23 | Library: Fix fan3_div writes for w8378* and it87; add vt8231 |
|---|
| 24 | Module dmi_scan: new |
|---|
| 25 | Module ds1621: Fix enable/disable |
|---|
| 26 | Module eeprom: Do not corrupt 24RF08's when checksum=1 |
|---|
| 27 | Module i2c-i801: Check for uninitialized base address; |
|---|
| 28 | enable if not enabled |
|---|
| 29 | Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption |
|---|
| 30 | Module i2c-sis630: new |
|---|
| 31 | Module i2c-sis645: new |
|---|
| 32 | Module lm92: Fix in-kernel initialization |
|---|
| 33 | Module via686a: Remove VT8231 support |
|---|
| 34 | Module vt8231: new |
|---|
| 35 | Module w83781: recognize Asus "ASB100 Bach" as AS99127F |
|---|
| 36 | Program dmidecode: new |
|---|
| 37 | Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install' |
|---|
| 38 | Program mkpatch: Add Config.in entries for, lm92, |
|---|
| 39 | pcf8574, pcf8591, smsc47m1, vt1211; |
|---|
| 40 | add dmi_scan |
|---|
| 41 | Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem |
|---|
| 42 | Program lm_sensors.init: fix stop() |
|---|
| 43 | Program sensord: Add /usr/local/etc to config file path; |
|---|
| 44 | add support for logging loadavg in RRD; |
|---|
| 45 | fix down-converting raw labels for RRD; |
|---|
| 46 | update chip support, still behind sensors |
|---|
| 47 | Program sensors: Add /usr/local/etc to config file path; |
|---|
| 48 | fix -c and -u flags; add vt8231 |
|---|
| 49 | Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F; |
|---|
| 50 | refuse to run on IBM systems; |
|---|
| 51 | fix sysconfig module numbering; |
|---|
| 52 | change quick write to not corrupt 24RF08's |
|---|
| 53 | |
|---|
| 54 | 2.6.4 (20020719) |
|---|
| 55 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 56 | File doc/vid: New |
|---|
| 57 | File include/sensors_vid.h: New |
|---|
| 58 | File sensors.conf.eg: Add vt1211, smsc47m1 |
|---|
| 59 | Library: Add multiple VRM version support for adm1025, w83781d; |
|---|
| 60 | fix 'flex scanner jammed' on some systems; |
|---|
| 61 | add vt1211, smsc47m1, lm92; |
|---|
| 62 | fix access mode checking |
|---|
| 63 | Makefiles: For 2.4+ kernels, modules now install in |
|---|
| 64 | kernel/drivers/[i2c,sensors] , not misc/ , and |
|---|
| 65 | 'make install' removes old versions in misc/ . |
|---|
| 66 | Use $CFLAGS and $CPPFLAGS if defined. |
|---|
| 67 | Module adm1025: Add multiple VID version support |
|---|
| 68 | Module ds1307: new |
|---|
| 69 | Module i2c-amd756: Add nVidia nForce support; fix block read length; |
|---|
| 70 | reliability improvements |
|---|
| 71 | Module i2c-hydra: Flush posted writes |
|---|
| 72 | Module i2c-i801: Add support for 82801DB (ICH4) |
|---|
| 73 | Module i2c-i810: Flush posted writes |
|---|
| 74 | Module i2c-savage4: new |
|---|
| 75 | Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147) |
|---|
| 76 | Module i2c-voodoo3: Flush posted writes |
|---|
| 77 | Module ds1307: New |
|---|
| 78 | Module lm92: New |
|---|
| 79 | Module smbus-arp: new |
|---|
| 80 | Module smsc47m1: new |
|---|
| 81 | Module via686a: Add support for VT8231 sensors |
|---|
| 82 | Module vt1211: new |
|---|
| 83 | Module w83781d: Add multiple VID version support; fix temp alarms |
|---|
| 84 | Program eeprom: new |
|---|
| 85 | Program i2cdump: Add smbus block command specification, add PEC support |
|---|
| 86 | Program lm_sensors.init: new |
|---|
| 87 | Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92, |
|---|
| 88 | pcf8574, pcf8591, smsc47m1, vt1211 |
|---|
| 89 | Program p4b_smbus: Add support for ICH4 |
|---|
| 90 | Program rrd: Fix swapped CPU and MB temps in summ_week.cgi |
|---|
| 91 | Program sensord.init: Renamed, was prog/init/sensors |
|---|
| 92 | Program sensord: Major update, now requires rrd source; |
|---|
| 93 | not compiled by default |
|---|
| 94 | Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A |
|---|
| 95 | (don't display algo. and adap.) option; |
|---|
| 96 | add vt1211, smsc47m1, lm92 |
|---|
| 97 | Program sensors-detect: Add VT8231, VT8233A, several S3 devices; |
|---|
| 98 | add 82801DB, LM85; fix perl warnings; |
|---|
| 99 | generate /etc/sysconfig/lm_sensors for |
|---|
| 100 | lm_sensors.init script |
|---|
| 101 | |
|---|
| 102 | 2.6.3 (20020322) |
|---|
| 103 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 104 | Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+ |
|---|
| 105 | File doc/chips/it87: add more temp_type help |
|---|
| 106 | File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3; |
|---|
| 107 | add adm1021 section; add lm87 AIN[1,2] template; |
|---|
| 108 | swap negative voltage limits for 782d,783s,627hf, |
|---|
| 109 | 697hf,it87; add more it87 help; swap neg. voltage |
|---|
| 110 | limits for lm78(-j), lm79, w83781d, as99127f |
|---|
| 111 | Library: Add PCF8591, W83697HF, ADM1023 support; |
|---|
| 112 | fix w83* fan_min computes; |
|---|
| 113 | swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f |
|---|
| 114 | Module adm1024: Add MODULE_LICENSE("GPL") |
|---|
| 115 | Module bt869: Add s-video out and DVD resolution support |
|---|
| 116 | Module eeprom: Add support for locations 128-255; rename /proc entries in hex |
|---|
| 117 | Module fscscy: implement min/max for voltages and fans |
|---|
| 118 | Module i2c-amd756: Add support for AMD768 |
|---|
| 119 | Module i2c-i810: Add support for 810E |
|---|
| 120 | Module i2c-keywest: Big update, sync with kernel 2.4.18 |
|---|
| 121 | Module i2c-piix4: Check for uninitialized base address |
|---|
| 122 | Module i2c-sis5595: Blacklist 645, 735 |
|---|
| 123 | Module i2c-viapro: Check for uninitialized base address |
|---|
| 124 | Module gl518sm: Standardize /proc entries in0-3 |
|---|
| 125 | Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7]; |
|---|
| 126 | fan -> fan1; fix temp2 limit writes |
|---|
| 127 | Module pcf8574: Add support for PCF8574A; /proc interface changed |
|---|
| 128 | Module pcf8591: new |
|---|
| 129 | Module sis5595: Blacklist 645, 735 |
|---|
| 130 | Module w83781d: Add W83697HF support; allow force_subclients parameter |
|---|
| 131 | for Tyan 2460 |
|---|
| 132 | Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names |
|---|
| 133 | Program decode-vaio.pl: new |
|---|
| 134 | Program i2cdump: Add i2c block read capability (requires i2c-2.6.3); |
|---|
| 135 | add text output |
|---|
| 136 | Program init/sensors: New SysV init script |
|---|
| 137 | Program mkpatch.pl: Add support for fscscy, add more help entries |
|---|
| 138 | Program p4b_smbus: new |
|---|
| 139 | Program rrd: Install summ_week.cgi |
|---|
| 140 | Program sensors: Add PCF8591, W83697HF, ADM1023 support, |
|---|
| 141 | clean up chassis intrusion prints |
|---|
| 142 | Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E; |
|---|
| 143 | fix Via686a and it87 detection; |
|---|
| 144 | add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231; |
|---|
| 145 | fix uninitialized values; it87 beats lm78 |
|---|
| 146 | |
|---|
| 147 | 2.6.2 (20011118) |
|---|
| 148 | NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. |
|---|
| 149 | Chip Modules (all): malloc.h -> slab.h |
|---|
| 150 | Modules (all): Add MODULE_LICENSE("GPL") |
|---|
| 151 | File doc/FAQ: More updates and additions |
|---|
| 152 | File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations |
|---|
| 153 | Library: Add fscpos and fscscy support, fix gl520 in4 ID, |
|---|
| 154 | update it87 alarm ID's. |
|---|
| 155 | Module fscpos: new (Fujitsu-Siemens Poseidon driver) |
|---|
| 156 | Module fscscy: new (Fujitsu-Siemens Scylla driver) |
|---|
| 157 | Module i2c-amd756: Improve busy handling/printk's |
|---|
| 158 | Module i2c-i801: Add 82801CA/CAM support |
|---|
| 159 | Module i2c-keywest: Sync with PPC people, it works now |
|---|
| 160 | Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support |
|---|
| 161 | Module i2c-viapro: Add Via VT8233 support |
|---|
| 162 | Module it87: Merge alarm_* /proc entries to alarms |
|---|
| 163 | Module sis5595: Fix support for rev B0 |
|---|
| 164 | Module via686a: Make limit initializations reliable |
|---|
| 165 | Module w83781d: Allow init=0 parameter to bypass initialization |
|---|
| 166 | Program isadump: Add flat address space (PCI) support |
|---|
| 167 | Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621, |
|---|
| 168 | fscpos, it87, maxilife, mtp008 |
|---|
| 169 | Program sensors: Fix w83781d temp precision |
|---|
| 170 | Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c), |
|---|
| 171 | Fujitsu Poseidon and Scylla, |
|---|
| 172 | Intel 82443MX and 82801CA/CAM detection, |
|---|
| 173 | add ITE 8172G detection (driver in kernel 2.4.10) |
|---|
| 174 | |
|---|
| 175 | 2.6.1 (20010830) |
|---|
| 176 | File BUGS: Updated |
|---|
| 177 | File doc/FAQ: More updates and additions |
|---|
| 178 | File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A |
|---|
| 179 | File sensors.conf.eg: Fix/enhance it87 section |
|---|
| 180 | Library: ds1621 and it87 updates |
|---|
| 181 | Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled. |
|---|
| 182 | Module i2c-amd756: Add AMD 766 support |
|---|
| 183 | Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6 |
|---|
| 184 | Module i2c-piix4: Add Serverworks CSB5 support |
|---|
| 185 | Module i2c-sis5595: Recognize unsupported chips and refuse to load |
|---|
| 186 | Module adm1025: Fixed temp2 min/max writes |
|---|
| 187 | Module ds1621: Add 12-bit precision mode |
|---|
| 188 | Module it87: Enable all alarms, add in8 support, add sensor type selection |
|---|
| 189 | Module sensors: Don't initialize i2c-proc (moved to i2c-core); |
|---|
| 190 | remove support for module |
|---|
| 191 | Module sis5595: Recognize unsupported chips and refuse to load |
|---|
| 192 | Module w83781d: Fix fan speed for as99127f (broken by 2.6.0) |
|---|
| 193 | Program eepromer: new |
|---|
| 194 | Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation |
|---|
| 195 | of sensors.c as a module in kernel |
|---|
| 196 | Program sensors: it87 updates; adjust temp. precision for some chips |
|---|
| 197 | Program sensors-detect: Fix ADM1024 and ADM1025 detection; |
|---|
| 198 | recognize unsupported SiS chips; |
|---|
| 199 | recognize AMD 766 and Serverworks CSB5. |
|---|
| 200 | |
|---|
| 201 | 2.6.0 (20010612) |
|---|
| 202 | NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!! |
|---|
| 203 | If your make fails because it can't find <linux/i2c-proc.h>, you |
|---|
| 204 | forgot this step!!! |
|---|
| 205 | File doc/FAQ: Many, many updates and additions |
|---|
| 206 | File doc/busses/i2c-sis5595: new |
|---|
| 207 | File doc/busses/i2c-tsunami: new |
|---|
| 208 | File doc/chips/it87: new |
|---|
| 209 | File doc/chips/via686a: Claim support for 686b. |
|---|
| 210 | File README.thinkpad: new |
|---|
| 211 | File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations; |
|---|
| 212 | Add lm87, adm9240, ds1780, lm81 templates; |
|---|
| 213 | Enhance help comments in file; |
|---|
| 214 | Add Tyan S2510 dual-MTP008 example; |
|---|
| 215 | Make separate sis5595 section. |
|---|
| 216 | Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package |
|---|
| 217 | Include file sensors.h: Most contents moved to i2c-proc.h in i2c package |
|---|
| 218 | Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4; |
|---|
| 219 | Add support for maxilife-nba and amd1024; |
|---|
| 220 | Change from sensors_* to i2c_* globals for new i2c-proc.[ch] |
|---|
| 221 | Chip Modules (all ISA): Remove #include "i2c-isa.h" |
|---|
| 222 | Chip Modules (all): Change from sensors_* to i2c_* globals |
|---|
| 223 | for new i2c-proc.[ch] |
|---|
| 224 | Makefiles: enhance to support Alpha architecture |
|---|
| 225 | Module adm1021: Fix lm84 and gl523sm support |
|---|
| 226 | Module adm1024: new |
|---|
| 227 | Module i2c-i801: Chip detection cleanup |
|---|
| 228 | Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel |
|---|
| 229 | Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled. |
|---|
| 230 | Module i2c-tsunami: New |
|---|
| 231 | Module i2c-via: Ensure i2c bus is tristated correctly. |
|---|
| 232 | Module it87: new driver for IT8705, IT8712, Sis950 chips |
|---|
| 233 | Module lm78: Recognize chipid=0x20 |
|---|
| 234 | Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations |
|---|
| 235 | Module mtp008: Fix temp initializations; |
|---|
| 236 | Save BIOS pin configuration of temps and fans; |
|---|
| 237 | Fix sensor type reads/writes and fan min writes; |
|---|
| 238 | Fix spurious invalid sensor type messages |
|---|
| 239 | Module sensors: Disabled, moved to i2c package as i2c-proc.c; only |
|---|
| 240 | used for patched kernel now. |
|---|
| 241 | Add xxx_init() calls for drivers added to mkpatch in 2.5.5. |
|---|
| 242 | Module sis5595: Fix temp, add in4 for chip revision 0xc0; |
|---|
| 243 | Allow force_addr=0xaddr |
|---|
| 244 | Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards) |
|---|
| 245 | Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp |
|---|
| 246 | reading changes; Add messages for subclient |
|---|
| 247 | registration failure |
|---|
| 248 | Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support |
|---|
| 249 | Program i2cset: new |
|---|
| 250 | Program isadump: fix for Alpha arch. compiles |
|---|
| 251 | Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help; |
|---|
| 252 | Remove ltc1710; Fix i2c_sis5595 typo; |
|---|
| 253 | Support kernel 2.4.5 makefile change; |
|---|
| 254 | Add i2c-tsunami; fixed i2c-voodoo3 configuration |
|---|
| 255 | Program sens_update_rrd: new |
|---|
| 256 | Program sensord: Add -d (debug) and -p (pid-file) options |
|---|
| 257 | Program sensors: Change reported version from 1.3 to the lm_sensors version; |
|---|
| 258 | Fix swapped limit and hysteresis on 9240, 5595, 686a; |
|---|
| 259 | Change mtp008 temps from max/min to limit/hyst; |
|---|
| 260 | Add maxilife-nba, adm1024, it87 support. |
|---|
| 261 | Program sensors-detect: Recognize lm78 with chipid=0x20; |
|---|
| 262 | Recognize SMSC Victory66 South Bridge; |
|---|
| 263 | Add devfs /dev/i2c/x support; |
|---|
| 264 | Add adm1024, it87xx support; Add thinkpad warning. |
|---|
| 265 | Program tellerstats: new |
|---|
| 266 | |
|---|
| 267 | 2.5.5 (20010115) |
|---|
| 268 | NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS |
|---|
| 269 | you have kernel 2.4.0-prerelease or greater. |
|---|
| 270 | Chip modules (all): Update mutex definition (works now for new 2.2 kernels) |
|---|
| 271 | File doc/developers/proc: new |
|---|
| 272 | File sensors.conf.eg: Add mtp008 entries, adm1025 entries |
|---|
| 273 | Library: Add ds1621, mtp008 support |
|---|
| 274 | Module adm1021: Add support for adm1021a / adm1023 |
|---|
| 275 | Modules adm1021, thmc50: Rename /proc entries to temp[1-2] |
|---|
| 276 | Module adm1025: Add support for remote temp; rename /proc entries to |
|---|
| 277 | in[0-5] and temp[1-2]; fix negative temp readings |
|---|
| 278 | Module adm9240: Rename /proc entries to in[0-5] |
|---|
| 279 | Module ddcmon: allow force and force_ddcmon parameters |
|---|
| 280 | Module ds1621: new |
|---|
| 281 | Module i2c-ali1535: Enhance error checking and recovery; add mutex |
|---|
| 282 | Module i2c-i810: Add "dummy write" before reads per Intel prog. ref. |
|---|
| 283 | Module i2c-piix4: add support for ServerWorks southbridge OSB4 |
|---|
| 284 | Module lm87: cleanup, update voltage calculations |
|---|
| 285 | Module mtp008: new |
|---|
| 286 | Module pcf8574: change update time to 5 seconds |
|---|
| 287 | Modules sis5595, i2c-sis5595: Check for uninitialized base addresses |
|---|
| 288 | Module w83781d: fix beep setting via /proc |
|---|
| 289 | Programs editticket, readticket: new |
|---|
| 290 | Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed |
|---|
| 291 | Program mkpatch.pl: more fixes; now adds many more modules |
|---|
| 292 | Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option; |
|---|
| 293 | add adm1025 temp2; report temp limits correctly as |
|---|
| 294 | min/max or limit/hysteresis; print message if no |
|---|
| 295 | sensors are found. Removed false errors from lm87 reads. |
|---|
| 296 | Program sensors-detect: Add ds1621, mtp008 detection; |
|---|
| 297 | add ServerWorks detection |
|---|
| 298 | |
|---|
| 299 | 2.5.4 (20001012) |
|---|
| 300 | Module i2c-viapro: Add support for Via 596B (0x3051) |
|---|
| 301 | Program m7101: moved to CVS tree, updated for 2.4.0 kernels |
|---|
| 302 | Program mkpatch.pl: fixed infinite loop |
|---|
| 303 | Program sensors-detect: Detect Via 596B (0x3051) |
|---|
| 304 | |
|---|
| 305 | 2.5.3 (20001008) |
|---|
| 306 | NOTE: i2c 2.5.3 MUST BE be compiled and installed first. |
|---|
| 307 | File useful_addresses.html: update |
|---|
| 308 | Library: Add lm87 support |
|---|
| 309 | Module pcf8574: new |
|---|
| 310 | Module i2c-ali1535: new |
|---|
| 311 | Module i2c-ali15x3: removed force #ifdef. |
|---|
| 312 | Module i2c-i801: support Intel 82801BA (815E chipset) |
|---|
| 313 | Module i2c-i801: add i2c block write support, fix smbus block bugs |
|---|
| 314 | (requires i2c 2.5.3 package) |
|---|
| 315 | Module i2c-i810: support Intel 82815 |
|---|
| 316 | Module lm87: new |
|---|
| 317 | Module sensors: Fix for kernel 2.4.0-test8 |
|---|
| 318 | (remove copy_to_user_ret and put_user_ret) |
|---|
| 319 | Module w83781d: limit fan divisors to 8 max. for as99127f |
|---|
| 320 | Program decode-dimms: Add html output option, update for SPD spec 1.2B. |
|---|
| 321 | Program i2cdump: Add smbus block read support |
|---|
| 322 | Programs i2cdetect, i2cdump: Improve error reporting |
|---|
| 323 | Program sensors: new switch -u (--unknown) |
|---|
| 324 | Program sensors-detect: detect Intel 82801BA (815E chipset) |
|---|
| 325 | Program sensors-detect: detect Intel 82815 |
|---|
| 326 | Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet) |
|---|
| 327 | Program sensors-detect: detect National LM87 |
|---|
| 328 | Program sensors-detect: detect nVidia devices supported by i2c-riva.o |
|---|
| 329 | Program sensors-detect: Improve error reporting |
|---|
| 330 | |
|---|
| 331 | 2.5.2 (20000709) |
|---|
| 332 | File sensors.conf.eg: Fix lm80 in8 calculation |
|---|
| 333 | Module w83781d: W83783S no longer crashes on unloading |
|---|
| 334 | Program sensors-detect: more robustness in case of unknown i2c adapters |
|---|
| 335 | Program sensors-detect, libsensors: fix eeprom size reporting |
|---|
| 336 | Program sensord: more flexibility, support for alarm scanning etc. |
|---|
| 337 | Program sensors: support for ignore setting on sensor alarms. |
|---|
| 338 | Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too. |
|---|
| 339 | |
|---|
| 340 | 2.5.1 (20000618) |
|---|
| 341 | Library: Add adm1025 support |
|---|
| 342 | Module adm1025: new |
|---|
| 343 | Module ddcmon: Fixed bus scan which could hang SMBus |
|---|
| 344 | Module i2c-keywest: new |
|---|
| 345 | Module maxilife: Add support for Maxilife '99 (NBA) |
|---|
| 346 | Module via686a: Enable sensors if not enabled by BIOS |
|---|
| 347 | Module w83781d: Improve w83783s support, w83627hf always has 2 pwm |
|---|
| 348 | Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring |
|---|
| 349 | Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3 |
|---|
| 350 | Module w83781d: Fis as99127f fan speed (was 66% too high) |
|---|
| 351 | Module w83781d: Improve beep input checking |
|---|
| 352 | Program i2cdump: Add Winbond-style bank selection |
|---|
| 353 | Program isadump: Add Winbond-style bank selection |
|---|
| 354 | Program sensors: Add adm1025 support. |
|---|
| 355 | Program sensors: Remove some as99127f entries, fix as99127 "(beep)" |
|---|
| 356 | Program sensors-detect: Fix i801 detection, add adm1025 driver entry |
|---|
| 357 | File sensors.conf.eg: Add Maxilife '99 entries |
|---|
| 358 | File sensors.conf.eg: Remove some as99127f entries. |
|---|
| 359 | Note: For as99127f, reinstall sensors.conf.eg manually (make install |
|---|
| 360 | won't reinstall it) or else 'sensors -s' will fail. |
|---|
| 361 | |
|---|
| 362 | 2.5.0 (20000312) |
|---|
| 363 | Dropped all kernel 2.0 and 2.1 compatibility |
|---|
| 364 | Module i2c-i810: new |
|---|
| 365 | Module ddcmon: new |
|---|
| 366 | Module via686a: new |
|---|
| 367 | Module i2c-amd756: fixed region request |
|---|
| 368 | Module i2c-voodoo3: Converted to use i2c-algo-bit layer |
|---|
| 369 | Module w83781d: Don't change pin settings at initialization; |
|---|
| 370 | also fix chip detection. |
|---|
| 371 | Library: Support for ddcmon and via686a |
|---|
| 372 | Program sensors-detect: Support for ddcmon and via686a |
|---|
| 373 | Program sensors: Support for eeprom, ddcmon and via686a |
|---|
| 374 | |
|---|
| 375 | 2.4.5 (20000116) |
|---|
| 376 | Introduced DESTDIR installation prefix |
|---|
| 377 | Module lm80: fixes, temperature now read and set correctly |
|---|
| 378 | Module i2c-voodoo3: driver enhancements |
|---|
| 379 | Module w83781d: fixes, AS99127 works much better now |
|---|
| 380 | Library: New ignore keyword in config file |
|---|
| 381 | Programs: Support for new ignore keyword |
|---|
| 382 | Program sensors-detect: Support for MGA detections |
|---|
| 383 | |
|---|
| 384 | 2.4.4 (19991201) |
|---|
| 385 | Addition of the alpha release of AMD 756 SMBus host support. |
|---|
| 386 | Many fixes and updates to the gl518sm driver |
|---|
| 387 | Updates and fixes for device detection |
|---|
| 388 | |
|---|
| 389 | 2.4.0 (19990920) |
|---|
| 390 | Too much to list. |
|---|
| 391 | i2c and smbus parts are split off to a separate i2c package. |
|---|
| 392 | New drivers and other stuff. |
|---|
| 393 | |
|---|
| 394 | 2.3.4 (19990616) |
|---|
| 395 | Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs) |
|---|
| 396 | All: Now compiles against kernel 2.0.x (again ;) |
|---|
| 397 | Module gl518sm: some updates and refinements |
|---|
| 398 | |
|---|
| 399 | 2.3.3 (19990603) |
|---|
| 400 | All: Now compiles against kernel 2.3.x (x >= 1) |
|---|
| 401 | Module i2c-voodoo3: Timing issue fixes |
|---|
| 402 | Module bt869: Seems to be functional and relatively well tested |
|---|
| 403 | Many modules were modified to be more compatible with the new |
|---|
| 404 | Mutex structure in the new experimental kernels. |
|---|
| 405 | |
|---|
| 406 | 2.3.2 (19990507) |
|---|
| 407 | Module i2c-hydra: Now compiles on 2.0.x kernels |
|---|
| 408 | Module i2c-lm75: Slightly better detection |
|---|
| 409 | * New, but not compiled by default: |
|---|
| 410 | Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver |
|---|
| 411 | Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver |
|---|
| 412 | |
|---|
| 413 | 2.3.1 (19990501) |
|---|
| 414 | All: Now compiles on PPC |
|---|
| 415 | Module i2c-hydra: NEW |
|---|
| 416 | Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works |
|---|
| 417 | Module w83781d: Removed deadlock (mutex was not initialized) |
|---|
| 418 | Documentation: A few glitches removed |
|---|
| 419 | Makefile: default module installation directory is now |
|---|
| 420 | /lib/modules/current/extra/misc |
|---|
| 421 | Program sensors-detect: PPC Hydra now detected |
|---|
| 422 | Program sensors: Now prints complete GL518SM information |
|---|
| 423 | Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added |
|---|
| 424 | |
|---|
| 425 | 2.3.0 (19990422) |
|---|
| 426 | All: Many, many changes and improvements |
|---|
| 427 | All: Many small bugs and problems removed |
|---|
| 428 | Modules: New insmod parameters |
|---|
| 429 | Modules: Much improved chip detection |
|---|
| 430 | Module maxilife: NEW |
|---|
| 431 | Module adm1021: MAX1617A now also supported |
|---|
| 432 | Module adm9240: DS1780 now also supported |
|---|
| 433 | Module w83781d: W83782D and W83783S now also supported |
|---|
| 434 | Program sensors-detect: NEW |
|---|
| 435 | Library: All chips now supported |
|---|
| 436 | Documentation: Very much improved |
|---|
| 437 | |
|---|
| 438 | 2.2.2 (199903??) |
|---|
| 439 | Just some minor updates and bug fixes. |
|---|
| 440 | |
|---|
| 441 | 2.2.1 (19990218) |
|---|
| 442 | All: Removed compile warnings |
|---|
| 443 | Module i2c-dev: Small bug removed if DEBUG=1 was used |
|---|
| 444 | Module sis5595: Now compiles for 2.0 kernels |
|---|
| 445 | Module adm1021: Detection corrected |
|---|
| 446 | |
|---|
| 447 | 2.2.0 (19990216) |
|---|
| 448 | All: Set copyrights to include 1999 |
|---|
| 449 | All: Small bugfixes |
|---|
| 450 | I2C: Upgraded to newest archive of Simon Vogl |
|---|
| 451 | Module i2c-dev: NEW |
|---|
| 452 | Module i2c-ali15x3: NEW |
|---|
| 453 | Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors |
|---|
| 454 | directories, and somewhat improved |
|---|
| 455 | Module sis5595: NEW |
|---|
| 456 | Modules: Renamed all bus modules to i2c-*, new directory lay-out |
|---|
| 457 | Library: Support for new chip drivers, several small bugs fixed |
|---|
| 458 | Library manual pages: NEW |
|---|
| 459 | Program i2cdetect: Moved to detect directory |
|---|
| 460 | Program detect.pl: NEW |
|---|
| 461 | Program doc-features: NEW |
|---|
| 462 | Program sensors: Added man-page |
|---|
| 463 | Document BUGS: Added cdrom bug and kernel i2c conflict |
|---|
| 464 | |
|---|
| 465 | 2.1.2 (19990116) |
|---|
| 466 | Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected |
|---|
| 467 | Module gl518sm.o: yet more bug fixes. It should at long last be usable now |
|---|
| 468 | Documentation in doc/kernel: NEW |
|---|
| 469 | |
|---|
| 470 | 2.1.1 (19990107) |
|---|
| 471 | Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35 |
|---|
| 472 | and older |
|---|
| 473 | Module gl518sm.o: Miscelaneous bugs and problems solved |
|---|
| 474 | Program isadump: NEW |
|---|
| 475 | |
|---|
| 476 | 2.1.0 (19981230) |
|---|
| 477 | Library: Completely NEW |
|---|
| 478 | Program sensors: NEW |
|---|
| 479 | Program grab_busses: NEW |
|---|
| 480 | Program decode-dimms: More information |
|---|
| 481 | Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets |
|---|
| 482 | Module w83781d.o: NEW |
|---|
| 483 | Module lm80.o: NEW |
|---|
| 484 | Module gl518sm.o: new procfile beep, several small updates |
|---|
| 485 | Modules: Now use pin readings, no more scaling within the kernel (use the |
|---|
| 486 | library instead) |
|---|
| 487 | |
|---|
| 488 | 2.0.2 (19981214) |
|---|
| 489 | Module eeprom.o: NEW |
|---|
| 490 | Program decode-dimms: NEW |
|---|
| 491 | Modules: fill_inode fix, will stop segfaults on unloading in kernels after |
|---|
| 492 | 2.1.58 |
|---|
| 493 | Modules: Somewhat less verbose on transfers |
|---|
| 494 | Module lm78.o now recognizes and handles lm78-j and lm79 |
|---|
| 495 | |
|---|
| 496 | 2.0.1 (1998121?) |
|---|
| 497 | Module gl518sm.o updates, to make it actually work |
|---|
| 498 | Module lm75.o high/low-byte swapping write bug fixed |
|---|
| 499 | |
|---|
| 500 | 2.0.0 (19981209) |
|---|
| 501 | Initial release |
|---|
