root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 5433

Revision 5433, 8.2 KB (checked in by khali, 7 years ago)

Unload kernel drivers which we loaded ourselves when we are done with them.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm-sensors CHANGES file
5  libsensors: Add support for instantaneous power sensors
6              Add support for current sensors
7  maxilife scripts: Delete (driver never ported to Linux 2.6)
8  sensors: Add support for instantaneous power sensors
9           Add support for current sensors
10 The LM99 offset is now handled in the lm90 driver
11  sensors-detect: Fix detection of ADT7463 and LM96000
12                  Add VIA VX800/VX820 support
13                  Fix detection of Intel 5000 series FB-DIMM AMB
14                  Fix detection of ADT7462
15                  Fix detection of SMSC LPC47M292
16                  Add SMSC LPC47M233 support
17                  Drop support for Linux 2.4 (#2325)
18                  Handle special case chips more efficiently
19                  Fix SMBus detection of W83627EHF and W83627DHG
20                  Get I2C adapter driver names from sysfs (#2328)
21                  Drop old SiS I2C adapter entries
22                  Drop separate LM78-J entry
23                  Merge all Mozart-2 entries
24                  Merge both GL518SM entries into one
25                  Complete GL520SM detection
26                  Improve GL525SM detection a bit
27                  Let kernel 2.6.28 and later handle chips aliases
28                  Unload kernel drivers when we are done with them (#2329)
303.0.3 (2008-09-28)
31  libsensors: Avoid namespace pollution
32  fancontrol: Don't use named pipes when we don't need them (#2319)
33  pwmconfig: Tell the user about gnuplot if it isn't installed
34             Fix MINSTOP and MINSTART test functions (#2340)
35             Test MINSTOP before MINSTART
36             Use better step values for MINSTOP test
37             Print the revision and date at start-up
38             Detect and report obviously incorrect fan speeds
39             Determine MINSTOP automatically
40             Skip MINSTOP and MINSTART tests if fan can't stop
41             Change default for MINTEMP from 0 to 20 degrees C
42             Add support for attributes in the hwmon class device (#2260)
43             Update manual page
44 Drop "label temp#_crit" statements
45  sensors-detect: Add Intel SCH (bus) support
46                  Add SMSC EMC6D103 support
47                  Improve MAX6657, MAX6658, MAX6659 detection
48                  Cache the byte data reads (#2326)
49                  Add Maxim MAX6654/MAX6690 support
50                  Add National Semiconductor LM95231 support
51                  Add Analog Devices ADT7481 support
52                  Refactor alias detection functions
53                  Fix Andigilog aSC7621 support
54                  Add Texas Instruments THMC51 support
55                  Fix Analog Devices ADT7461 support
56                  Add VIA C7 support
57                  Fix Winbond W83L786NR/NG/R/G support (#2336)
58                  Add Maxim MAX6646/MAX6647/MAX6649 support
59                  Add VIA VT1212 support
60                  Add SMSC EMC2700LPC support
61                  Add ITE IT8720F support
62                  Add Texas Instruments TMP411 support
63                  Prevent misdetection of W83627DHG on I2C as LM78
64                  W83627DHG has no subclients
65                  Add Maxim MAX1618 support
673.0.2 (2008-05-18)
68  documentation: Delete the FAQ, now maintained on the wiki
69  libsensors: Use __func__ instead of __FUNCTION__
70              Parse the configuration file in C locale
71              Late compute statements override early ones
72              Support virtual hwmon devices (#2309)
73              Support power and energy sensors
74              Support DOS-style configuration files again (#2284)
75  pwmconfig: Don't create the configuration file before it's needed
76             Don't preserve configuration file customizations
77             Fix permissions of the configuration file
78             Don't start if fancontrol is running (#2299)
79  fancontrol: Don't start if already running (#2299)
80              Delete at exit time (#2299)
81  sensord: Fix support of multiple chip names on the command line (#2321)
82  sensors: Print energy and power sensors with automatically scaled units
83  sensors-detect: Add SMSC SCH5027D detection
84                  Do not access I/O ports on PPC
85                  Move south bridge sensor detection to the right section
86                  Run chip_special_cases() earlier
87                  New device ID for the SMSC SCH5317
88                  Add SMSC SCH5127 detection
89                  Add National Semiconductor LM64 detection
90                  Add Asus F8000 detection
91                  Add Intel ICH10 (bus) detection
92                  Don't probe I2C addresses 0x40-0x47
93                  Fix the parsing of I2C addresses not to scan
94                  Detect and skip 1-register-only I2C devices
95                  Avoid SMBus word transactions where possible
96                  Add Dallas DS1631 detection
983.0.1 (2008-01-28)
99  documentation: Update the application writing guidelines
100  libsensors: No longer depend on libsysfs (#2262)
101              Don't guess the bus type from the device ID format (#2240)
102              Add support for attributes in the hwmon class device (#2260)
103  Makefile: No warnings about ld configuration for staged installations
104            Document the variable overriding mechanism (#2296)
105  pwmconfig: Really hide errors on sysfs writes
106             Deal gracefully with read-only pwm_enable files
107             Warn about outputs found in automatic mode
108             Repeat available configuration options before prompt (#2289)
109             Fix duplicate warning message when config file is broken
110  fancontrol: Detect improperly formatted FCTEMPS value (#2293)
111  sensord: Fix rrd support (#2276)
112           Use the same colors for daily and weekly charts
113           Drop workaround needed by old versions of rrdtool
114  sensors: Fix error path on library initialization error
115 Fix voltage value references (g520sm, lm80, pc87366)
116  sensors-detect: Drop PCA9540 detection
117                  Improve sysconfig and modprobe.d integration
118                  Add SMSC SCH5514D-NS detection (no sensors)
119                  Lower the confidence of MAX6650/MAX6651
120                  Add Fintek F71858DG detection
121                  Add Fintek F81216D detection (no sensors)
122  unhide_ICH_SMBus: Add support for the 82801AA (ICH)
1243.0.0 (2007-11-24)
125  Makefile: Fix MODULE_DIR usage in etc
126            Fix build on PPC
127  pwmconfig: Better diagnostics in pwmdisable
128             Give the fans some time to spin up
129  sensors-detect: Add Texas Instruments TMP401 detection
130                  Mention the f75375s driver
131                  Add SMSC LPC47B367-NC detection (no sensors)
132                  Reduce w83781d/lm78 I2C address probing range
133                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
1353.0.0-rc3 (2007-10-28)
136  libsensors: Add a default configuration file
137              Fix memory leaks on initialization error
138              Make the configuration file optional
139              Change the default configuration file to /etc/sensors3.conf
140  sensord: Reload config on SIGHUP rather than automatically
141           No default configuration file name
142  sensors: Fix file handle leak on library initialization error
143           Handle the case where voltage measurements aren't available
144           No default configuration file name
145           Install as sensors again
146 Install as sensors3.conf
147  sensors-detect: Fix SMSC LPC47B357/M967 detection
148                  Select the right driver for FSC chips
149 Handle alternative chip lists
1513.0.0-rc2 (2007-10-10)
152  useful_addresses.html: Moved to the wiki
153  Makefile: Add sensors-conf-convert to make install
154  libsensors: Notify the caller when writing a value fails
155              Differentiate between different read error types
156              Report I/O errors as such
157  sensord: Log the error code on failure
158           Drop the configuration file search path mechanism (#2259)
159           Manual page update
160  sensors: Fix spurious critical temperature alarm
161           Print error messages to stderr
162           Make error messages more helpful and consistent
163           Better handling of the fault flags
164  sensors-conf-convert: Add a short help text
165  sensors-detect: Fix SMSC SCH311x detection
166                  Add AMD K10 CPU sensor detection
1683.0.0-rc1 (2007-09-25)
169  Initial release
Note: See TracBrowser for help on using the browser.